|
Spec:
|
Title:
|
|
NASM 525 (Formerly AN 525)
|
Screw - Washer Head
|
|
AS 3582 (Formerly MS 9068)
|
Packing, Preformed - O-Ring Seal, AMS 3304
|
|
NASM 15795 (Formerly MS 15795)
|
Washer, Flat-Metal, Round General Purpose
|
|
NASM 16562 (Formerly MS 16562)
|
Pin, Spring-Tubular, Slotted
|
|
MS 20001
|
Hinge, Butt, Structural, Extruded
|
|
MS 20257
|
Hinge, Continuous
|
|
NASM 20392 (Formerly MS 20392)
|
Pin, Straight, Headed Drilled Shank
|
|
NASM 21047 (Formerly MS 21047)
|
Nut, Self-Locking, Plate, Two-Lug, Low Height, Steel, 125 KSI FTU, 450 Degrees F.
|
|
NASM 21059 (Formerly MS 21059)
|
Nut, Self-locking, Plate, Two Lug, Floating, Low Height Steel, 125 KSI Ftu, 450 F.
|
|
NASM 21060 ()Formerly MS 21060)
|
Nut, Self-locking, Plate, Two Lug, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Degree F And 800 Degree F.
|
|
NASM 21075 (Formerly MS 21075)
|
Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 KSI FTU, 450 F.
|
|
NASM 21076 (Formerly MS 21076)
|
Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing,Low Height, Cres, 125 KSI FTU, 450 F. and 800 F.
|
|
NASM 21083 (Formerly MS 21083)
|
Nut, Self-Locking, Hexagon, Non-Metallic Insert, Low Height, 250 F.
|
|
NASM 21250 (Formerly MS 21250)
|
Bolt, Tension, Steel, External Wrenching, Flanged, 12-Point, 180 KSI FTU, 450 F.
|
|
NASM 24693 (Formerly MS 24693)
|
Screw, Machine, Flat Countersunk Head, 100, Cross Recessed, UNC-2A and UNF-2A.
|
|
MS 25081
|
Washer, Key
|
|
MS 25082
|
Nut, Plain, Hexagon, Electrical - Thin
|
|
AS 25281 (Formerly MS 25281)
|
Clamp, Loop, Plastic, Wire Support
|
|
NASM 27039 (Formerly MS 27039)
|
crew, Machine, Pan Head, Cruciform Recess
|
|
MS 27183
|
Washer, Flat (Round, Steel, Cadmium Plated) General Purpose
|
|
AS 28775 (Formerly MS 28775)
|
Packing, Preformed, MS28775 O-Ring
|
|
MS 51830
|
Insert, Screw-thread, Locked In, Key Locked, Miniature and Lightweight
|
|
MS 51831
|
Insert, Screw-thread, Locked In, Key Locked, Heavy Duty
|
|
NASM 51834 (Formerly MS 51834)
|
Stud, Locked In, Key-Locked, Heavy Duty
|
|
NASM 51861 (Formerly MS 51861)
|
Screw, Tapping-thread Forming, Type AB, Pan Head, Cross-recessed
|
|
MS 51957
|
Screw, Machine, Pan Head, Cross-recessed, Corrosion Resistant Steel, UNC-2A
|
|
NASM 51958 (Formerly MS 51958)
|
Screw, Machine Pan-head, Cross-recessed, Corrosion Resisting Steel, UNF-2A
|
|
NASM 51959 (Formerly MS 51959)
|
Screw, Machine Pan-Head, 82, Cross-Recessed, Corrosion-Resisting Steel, Unc-2A
|
|
ASME B18.2.1 (Formerly MS 90728)
|
Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)
|