|
Spec:
|
Title:
|
|
EN 617
|
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
|
|
EN 618
|
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
|
|
EN 619
|
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
|
|
EN 612
|
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
|
|
EN 1155
|
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
|
|
EN 12015
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
|
|
EN 12016
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
|
|
EN 12895
|
Industrial trucks - Electromagnetic compatibility
|
|
EN 13241-1
|
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
|
|
EN 13309
|
Construction machinery - Electromagnetic compatibility of machines with internal power supply
|
|
EN 14010
|
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
|
|
EN ISO 14982
|
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
|
|
EN 50065-1
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 1: General requirements, frequency bands and electromagnetic disturbances
|
|
EN 50065-2-1
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments
|
|
EN 50065-2-2
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
|
|
EN 50065-2-3
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
|
|
EN 50083-2
|
Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
|
|
EN 50090-2-2
|
Home and Building Electronic Systems (HBES) -- Part 2-2: System overview - General technical requirements
|
|
EN 50121-1
|
Railway applications - Electromagnetic compatibility -- Part 1: General
|
|
EN 50121-2
|
Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world
|
|
EN 50121-3-1
|
Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle
|
|
EN 50121-3-2
|
Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus
|
|
EN 50121-4
|
Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus
|
|
EN 50121-5
|
Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of fixed power supply installations and apparatus
|
|
EN 50130-4
|
Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
|
|
EN 50148
|
Electronic taximeters
|
|
EN 50240
|
Electromagnetic compatibility (EMC) - Product standard for resistance welding equipment
|
|
EN 50263
|
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment
|
|
EN 50270
|
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
|
|
EN 50293
|
Electromagnetic compatibility - Road traffic signal systems - Product standard
|
|
EN 50295
|
Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)
|
|
EN 50370-1
|
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1: Emission
|
|
EN 50370-2
|
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity
|
|
EN 50412-2-1
|
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz -- Part 2-1: Residential, commercial and industrial environment - Immunity requirements
|
|
EN 50428
|
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
|
|
EN 50470-1
|
Electricity metering equipment (a.c.) -- Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
|
|
EN 50490
|
Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps
|
|
EN 50491-5-1
|
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 5-1: EMC requirements, conditions and test set-up
|
|
EN 50491-5-2
|
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment
|
|
EN 50491-5-3
|
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 5-3: EMC requirements for HBES/BACS used in industry environment
|
|
EN 50498
|
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
|
|
EN 50512
|
Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
|
|
EN 50529-1
|
EMC Network Standard -- Part 1: Wire-line telecommunications networks using telephone wires
|
|
EN 50529-2
|
EMC Network Standard -- Part 2: Wire-line telecommunications networks using coaxial cables
|
|
EN 55011
|
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement CISPR 11:2009 (Modified)
|
|
EN 55012
|
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers CISPR 12:2007
|
|
EN 55013
|
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement CISPR 13:2001 (Modified)
|
|
EN 55014-1
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission CISPR 14-1:2005
|
|
EN 55014-2
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard CISPR 14-2:1997
|
|
EN 55022
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement CISPR 22:2005 (Modified)
|
|
EN 55015
|
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR 15:2005
|
|
EN 55020
|
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement CISPR 20:2006
|
|
EN 55024
|
Information technology equipment - Immunity characteristics - Limits and methods of measurement CISPR 24:1997 (Modified)
|
|
EN 55103-1
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 1: Emissions
|
|
EN 55103-2
|
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 2: Immunity
|
|
EN 60034-1
|
Rotating electrical machines -- Part 1: Rating and performance IEC 60034-1:2010 (Modified)
|
|
EN 60204-31
|
Safety of machinery - Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:1996 (Modified)
|
|
EN 60439-1
|
Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies IEC 60439-1:1999
|
|
EN 60669-2-1
|
Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches IEC 60669-2-1:2002 (Modified)
|
|
EN 60730-1
|
Automatic electrical controls for household and similar use -- Part 1: General requirements IEC 60730-1:1999 (Modified)
|
|
EN 60730-2-5
|
Automatic electrical controls for household and similar use -- Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified)
|
|
EN 60730-2-6
|
Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified)
|
|
EN 60730-2-7
|
Automatic electrical controls for household and similar use -- Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified)
|
|
EN 60730-2-8
|
Automatic electrical controls for household and similar use -- Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified)
|
|
EN 60730-2-9
|
Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified)
|
|
EN 60730-2-14
|
Automatic electrical controls for household and similar use -- Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified)
|
|
EN 60730-2-15
|
Automatic electrical controls for household and similar use -- Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified)
|
|
EN 60730-2-18
|
Automatic electrical controls for household and similar use -- Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements IEC 60730-2-18:1997 (Modified)
|
|
EN 60870-2-1
|
Telecontrol equipment and systems -- Part 2: Operating conditions -- Section 1: Power supply and electromagnetic compatibility IEC 60870-2-1:1995
|
|
EN 60945
|
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results IEC 60945:2002
|
|
EN 60947-1
|
Low-voltage switchgear and controlgear -- Part 1: General rules IEC 60947-1:2007
|
|
EN 60947-2
|
Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers IEC 60947-2:2006
|
|
EN 60947-4-1
|
Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters IEC 60947-4-1:2009
|
|
EN 60947-4-2
|
Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters IEC 60947-4-2:1999
|
|
EN 60947-4-3
|
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:1999
|
|
EN 60947-5-1
|
Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices IEC 60947-5-1:2003
|
|
EN 60947-5-2
|
Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches IEC 60947-5-2:2007
|
|
EN 60947-5-3
|
Low-voltage switchgear and controlgear -- Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999
|
|
EN 60947-5-6
|
Low-voltage switchgear and controlgear -- Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) IEC 60947-5-6:1999
|
|
EN 60947-5-7
|
Low-voltage switchgear and controlgear -- Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output IEC 60947-5-7:2003
|
|
EN 60947-5-9
|
Low-voltage switchgear and controlgear -- Part 5-9: Control circuit devices and switching elements - Flow rate switches IEC 60947-5-9:2006
|
|
EN 60947-6-1
|
Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment - Transfer switching equipment IEC 60947-6-1:2005
|
|
EN 60947-6-2
|
Low-voltage switchgear and controlgear -- Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002
|
|
EN 60947-8
|
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003
|
|
EN 60974-10
|
Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements IEC 60974-10:2007
|
|
EN 61000-3-2
|
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) IEC 61000-3-2:2005
|
|
EN 61000-3-3
|
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2008
|
|
EN 61000-3-11
|
Electromagnetic compatibility (EMC) -- Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection IEC 61000-3-11:2000
|
|
EN 61000-3-12
|
Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase IEC 61000-3-12:2004
|
|
EN 61000-6-1
|
Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments IEC 61000-6-1:2005
|
|
EN 61000-6-3
|
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments IEC 61000-6-3:2006
|
|
EN 61000-6-4
|
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments IEC 61000-6-4:2006
|
|
EN 61008-1
|
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) -- Part 1: General rules IEC 61008-1:1996 (Modified) + A1:2002 (Modified)
|
|
EN 61009-1
|
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules IEC 61009-1:1996 (Modified) + A1:2002 (Modified)
|
|
EN 61131-2
|
Programmable controllers -- Part 2: Equipment requirements and tests IEC 61131-2:2007
|
|
EN 61204-3
|
Low voltage power supplies, d.c. output -- Part 3: Electromagnetic compatibility (EMC) IEC 61204-3:2000
|
|
EN 61326-1
|
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements IEC 61326-1:2005
|
|
EN 61326-2-1
|
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications IEC 61326-2-1:2005
|
|
EN 61326-2-2
|
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems IEC 61326-2-2:2005
|
|
EN 61326-2-3
|
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning IEC 61326-2-3:2006
|
|
EN 61326-2-4
|
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 IEC 61326-2-4:2006
|
|
EN 61326-2-5
|
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 IEC 61326-2-5:2006
|
|
EN 61439-1
|
Low-voltage switchgear and controlgear assemblies -- Part 1: General rules IEC 61439-1:2009 (Modified)
|
|
EN 60439-2
|
Low-voltage switchgear and controlgear assemblies -- Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2009
|
|
EN 61543
|
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility IEC 61543:1995
|
|
EN 61547
|
Equipment for general lighting purposes - EMC immunity requirements IEC 61547:2009
|
|
EN 61557-12
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007
|
|
EN 61800-3
|
Adjustable speed electrical power drive systems -- Part 3: EMC requirements and specific test methods IEC 61800-3:2004
|
|
EN 61812-1
|
Specified time relays for industrial use -- Part 1: Requirements and tests IEC 61812-1:1996
|
|
EN 62020
|
Electrical accessories - Residual current monitors for household and similar uses (RCMs) IEC 62020:1998
|
|
EN 62026-1
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -- Part 1: General rules IEC 62026-1:2007
|
|
EN 62026-3
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -- Part 3: DeviceNet IEC 62026-3:2008
|
|
EN 62040-2
|
Uninterruptible power systems (UPS) -- Part 2: Electromagnetic compatibility (EMC) requirements IEC 62040-2:2005
|
|
EN 62052-11
|
Electricity metering equipment (AC) - General requirements, tests and test conditions -- Part 11: Metering equipment IEC 62052-11:2003
|
|
EN 62052-21
|
Electricity metering equipment (a.c.) - General requirements, tests and test conditions -- Part 21: Tariff and load control equipment IEC 62052-21:2004
|
|
EN 62053-11
|
Electricity metering equipment (a.c.) - Particular requirements -- Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) IEC 62053-11:2003
|
|
EN 62053-21
|
Electricity metering equipment (a.c.) - Particular requirements -- Part 21: Static meters for active energy (classes 1 and 2) IEC 62053-21:2003
|
|
EN 62053-22
|
Electricity metering equipment (a.c.) - Particular requirements -- Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) IEC 62053-22:2003
|
|
EN 62054-11
|
Electricity metering (a.c.) - Tariff and load control -- Part 11: Particular requirements for electronic ripple control receivers IEC 62054-11:2004
|
|
EN 62054-21
|
Electricity metering (a.c.) - Tariff and load control -- Part 21: Particular requirements for time switches IEC 62054-21:2004
|
|
EN 62135-2
|
Resistance welding equipment -- Part 2: Electromagnetic compatibility (EMC) requirements IEC 62135-2:2007
|
|
EN 62310-2
|
Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements IEC 62310-2:2006 (Modified)
|
|
EN 62423
|
Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) IEC 62423:2007 (Modified)
|
|
EN 300 386
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
|
|
EN 301 489-34
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones
|