Standard: | Title: |
EN 617 |
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
EN 618 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
EN 619 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
EN 620 |
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
EN 1155 |
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods |
EN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
EN 12895 |
Industrial trucks - Electromagnetic compatibility |
EN 13241-1 |
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
EN 13309 |
Construction machinery - Electromagnetic compatibility of machines with internal power supply |
EN 14010 |
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
EN ISO 14982 |
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
EN 50065-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-2-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
EN 50065-2-2 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
EN 50065-2-3 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
EN 50083-2 |
Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment |
EN 50090-2-2 |
Home and Building Electronic Systems (HBES) -- Part 2-2: System overview - General technical requirements |
EN 50121-1 |
Railway applications - Electromagnetic compatibility -- Part 1: General |
EN 50121-2 |
Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world |
EN 50121-3-1 |
Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle |
EN 50121-3-2 |
Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus |
EN 50121-4 |
Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus |
EN 50121-5 |
Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of fixed power supply installations and apparatus |
EN 50130-4 |
Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
EN 50148 |
Electronic taximeters |
EN 50240 |
Electromagnetic compatibility (EMC) - Product standard for resistance welding equipment |
EN 50263 |
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
EN 50270 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 50293 |
Electromagnetic compatibility - Road traffic signal systems - Product standard |
EN 50295 |
Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i) |
EN 50370-1 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1: Emission |
EN 50370-2 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity |
EN 50412-2-1 |
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz -- Part 2-1: Residential, commercial and industrial environment - Immunity requirements |
EN 50428 |
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) |
EN 50470-1 |
Electricity metering equipment (a.c.) -- Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
EN 50490 |
Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps |
EN 50491-5-1 |
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 5-1: EMC requirements, conditions and test set-up |
EN 50491-5-2 |
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
EN 50491-5-3 |
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 5-3: EMC requirements for HBES/BACS used in industry environment |
EN 50498 |
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles |
EN 50512 |
Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
EN 50529-1 |
EMC Network Standard -- Part 1: Wire-line telecommunications networks using telephone wires |
EN 50529-2 |
EMC Network Standard -- Part 2: Wire-line telecommunications networks using coaxial cables |
EN 55011 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement CISPR 11:2009 (Modified) |
EN 55012 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers CISPR 12:2007 |
EN 55013 |
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement CISPR 13:2001 (Modified) |
EN 55014-1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission CISPR 14-1:2005 |
EN 55014-2 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard CISPR 14-2:1997 |
EN 55022 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement CISPR 22:2005 (Modified) |
EN 55015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR 15:2005 |
EN 55020 |
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement CISPR 20:2006 |
EN 55024 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement CISPR 24:1997 (Modified) |
EN 55103-1 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 1: Emissions |
EN 55103-2 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 2: Immunity |
EN 60034-1 |
Rotating electrical machines -- Part 1: Rating and performance IEC 60034-1:2010 (Modified) |
EN 60204-31 |
Safety of machinery - Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:1996 (Modified) |
EN 60439-1 |
Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies IEC 60439-1:1999 |
EN 60669-2-1 |
Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches IEC 60669-2-1:2002 (Modified) |
EN 60730-1 |
Automatic electrical controls for household and similar use -- Part 1: General requirements IEC 60730-1:1999 (Modified) |
EN 60730-2-5 |
Automatic electrical controls for household and similar use -- Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified) |
EN 60730-2-6 |
Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified) |
EN 60730-2-7 |
Automatic electrical controls for household and similar use -- Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified) |
EN 60730-2-8 |
Automatic electrical controls for household and similar use -- Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified) |
EN 60730-2-9 |
Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified) |
EN 60730-2-14 |
Automatic electrical controls for household and similar use -- Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified) |
EN 60730-2-15 |
Automatic electrical controls for household and similar use -- Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified) |
EN 60730-2-18 |
Automatic electrical controls for household and similar use -- Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements IEC 60730-2-18:1997 (Modified) |
EN 60870-2-1 |
Telecontrol equipment and systems -- Part 2: Operating conditions -- Section 1: Power supply and electromagnetic compatibility IEC 60870-2-1:1995 |
EN 60945 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results IEC 60945:2002 |
EN 60947-1 |
Low-voltage switchgear and controlgear -- Part 1: General rules IEC 60947-1:2007 |
EN 60947-2 |
Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers IEC 60947-2:2006 |
EN 60947-4-1 |
Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters IEC 60947-4-1:2009 |
EN 60947-4-2 |
Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters IEC 60947-4-2:1999 |
EN 60947-4-3 |
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:1999 |
EN 60947-5-1 |
Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices IEC 60947-5-1:2003 |
EN 60947-5-2 |
Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches IEC 60947-5-2:2007 |
EN 60947-5-3 |
Low-voltage switchgear and controlgear -- Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999 |
EN 60947-5-6 |
Low-voltage switchgear and controlgear -- Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) IEC 60947-5-6:1999 |
EN 60947-5-7 |
Low-voltage switchgear and controlgear -- Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output IEC 60947-5-7:2003 |
EN 60947-5-9 |
Low-voltage switchgear and controlgear -- Part 5-9: Control circuit devices and switching elements - Flow rate switches IEC 60947-5-9:2006 |
EN 60947-6-1 |
Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment - Transfer switching equipment IEC 60947-6-1:2005 |
EN 60947-6-2 |
Low-voltage switchgear and controlgear -- Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002 |
EN 60947-8 |
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003 |
EN 60974-10 |
Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements IEC 60974-10:2007 |
EN 61000-3-2 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) IEC 61000-3-2:2005 |
EN 61000-3-3 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2008 |
EN 61000-3-11 |
Electromagnetic compatibility (EMC) -- Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection IEC 61000-3-11:2000 |
EN 61000-3-12 |
Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase IEC 61000-3-12:2004 |
EN 61000-6-1 |
Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments IEC 61000-6-1:2005 |
EN 61000-6-3 |
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments IEC 61000-6-3:2006 |
EN 61000-6-4 |
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments IEC 61000-6-4:2006 |
EN 61008-1 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) -- Part 1: General rules IEC 61008-1:1996 (Modified) + A1:2002 (Modified) |
EN 61009-1 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules IEC 61009-1:1996 (Modified) + A1:2002 (Modified) |
EN 61131-2 |
Programmable controllers -- Part 2: Equipment requirements and tests IEC 61131-2:2007 |
EN 61204-3 |
Low voltage power supplies, d.c. output -- Part 3: Electromagnetic compatibility (EMC) IEC 61204-3:2000 |
EN 61326-1 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements IEC 61326-1:2005 |
EN 61326-2-1 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications IEC 61326-2-1:2005 |
EN 61326-2-2 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems IEC 61326-2-2:2005 |
EN 61326-2-3 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning IEC 61326-2-3:2006 |
EN 61326-2-4 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 IEC 61326-2-4:2006 |
EN 61326-2-5 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 IEC 61326-2-5:2006 |
EN 61439-1 |
Low-voltage switchgear and controlgear assemblies -- Part 1: General rules IEC 61439-1:2009 (Modified) |
EN 61439-2 |
Low-voltage switchgear and controlgear assemblies -- Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2009 |
EN 61543 |
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility IEC 61543:1995 |
EN 61547 |
Equipment for general lighting purposes - EMC immunity requirements IEC 61547:2009 |
EN 61557-12 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007 |
EN 61800-3 |
Adjustable speed electrical power drive systems -- Part 3: EMC requirements and specific test methods IEC 61800-3:2004 |
EN 61812-1 |
Specified time relays for industrial use -- Part 1: Requirements and tests IEC 61812-1:1996 |
EN 62020 |
Electrical accessories - Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 |
EN 62026-1 |
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -- Part 1: General rules IEC 62026-1:2007 |
EN 62026-3 |
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -- Part 3: DeviceNet IEC 62026-3:2008 |
EN 62040-2 |
Uninterruptible power systems (UPS) -- Part 2: Electromagnetic compatibility (EMC) requirements IEC 62040-2:2005 |
EN 62052-11 |
Electricity metering equipment (AC) - General requirements, tests and test conditions -- Part 11: Metering equipment IEC 62052-11:2003 |
EN 62052-21 |
Electricity metering equipment (a.c.) - General requirements, tests and test conditions -- Part 21: Tariff and load control equipment IEC 62052-21:2004 |
EN 62053-11 |
Electricity metering equipment (a.c.) - Particular requirements -- Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) IEC 62053-11:2003 |
EN 62053-21 |
Electricity metering equipment (a.c.) - Particular requirements -- Part 21: Static meters for active energy (classes 1 and 2) IEC 62053-21:2003 |
EN 62053-22 |
Electricity metering equipment (a.c.) - Particular requirements -- Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) IEC 62053-22:2003 |
EN 62054-11 |
Electricity metering (a.c.) - Tariff and load control -- Part 11: Particular requirements for electronic ripple control receivers IEC 62054-11:2004 |
EN 62054-21 |
Electricity metering (a.c.) - Tariff and load control -- Part 21: Particular requirements for time switches IEC 62054-21:2004 |
EN 62135-2 |
Resistance welding equipment -- Part 2: Electromagnetic compatibility (EMC) requirements IEC 62135-2:2007 |
EN 62310-2 |
Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements IEC 62310-2:2006 (Modified) |
EN 62423 |
Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) IEC 62423:2007 (Modified) |
EN 300 386 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
EN 301 489-34 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |