10.01: Electrical Insulation (I): D69 - D2484
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1000 - Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
- ASTM-D1039 - Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
- ASTM-D1047 - Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
- ASTM-D1082 - Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
- ASTM-D115 - Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
- ASTM-D1168 - Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation (Withdrawn 2014)
- ASTM-D1202 - Specification for Plasticized Cellulose Acetate Sheet and Film for Primary Insulation (Withdrawn 1990)
- ASTM-D1305 - Standard Specification for Electrical Insulating Paper and Paperboard—Sulfate (Kraft) Layer Type
- ASTM-D1346 - Methods of Testing Electrical Insulating Varnishes for 180 C and Above (Withdrawn 1986)
- ASTM-D1351 - Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
- ASTM-D1352 - Standard Specification for Ozone-Resisting Butyl Rubber Insulation for Wire and Cable (Withdrawn 2006)
- ASTM-D1389 - Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials (Withdrawn 2014)
- ASTM-D1458 - Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation (Withdrawn 2019)
- ASTM-D1459 - Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation (Withdrawn 2009)
- ASTM-D149 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
- ASTM-D150 - Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM-D1523 - Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation (Withdrawn 2011)
- ASTM-D1531 - Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
- ASTM-D1532 - Specification for Polyester Glass-Mat Sheet Laminate (Withdrawn 1993)
- ASTM-D1673 - Standard Test Methods for Relative Permittivity And Dissipation Factor of Expanded Cellular Polymers Used For Electrical Insulation (Withdrawn 2006)
- ASTM-D1674 - Methods of Testing Polymerizable Embedding Compounds Used for Electrical Insulation (Withdrawn 1990)
- ASTM-D1675 - Standard Test Methods for Polytetrafluoroethylene Tubing
- ASTM-D1676 - Standard Test Methods for Film-Insulated Magnet Wire
- ASTM-D1677 - Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
- ASTM-D1679 - Standard Specification for Synthetic Rubber Heat-and Moisture-Resisting Insulation for Wire and Cable, 75°C Operation (Withdrawn 2006)
- ASTM-D1711 - Standard Terminology Relating to Electrical Insulation
- ASTM-D176 - Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation (Withdrawn 2013)
- ASTM-D1825 - Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing (Withdrawn 2012)
- ASTM-D1830 - Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
- ASTM-D1867 - Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring (Withdrawn 2020)
- ASTM-D1868 - Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
- ASTM-D1930 - Specification for Kraft Dielectric Tissue, Capacitor Grade (Withdrawn 1985)
- ASTM-D1931 - Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation (Withdrawn 2013)
- ASTM-D1932 - Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
- ASTM-D202 - Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
- ASTM-D2131 - Standard Classification for Natural Muscovite Mica Splittings
- ASTM-D2132 - Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM-D2148 - Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
- ASTM-D2149 - Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
- ASTM-D2219 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation
- ASTM-D2220 - Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 °C Operation
- ASTM-D2275 - Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
- ASTM-D229 - Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
- ASTM-D2301 - Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM-D2303 - Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
- ASTM-D2304 - Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
- ASTM-D2305 - Standard Test Methods for Polymeric Films Used for Electrical Insulation
- ASTM-D2307 - Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
- ASTM-D2308 - Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
- ASTM-D2381 - Standard Test Methods for Flexible Composite Materials Used for Electrical Insulation (Withdrawn 2005)
- ASTM-D2400 - Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation (Withdrawn 2013)
- ASTM-D2413 - Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
- ASTM-D2436 - Specification for Forced-Convection Laboratory Ovens for Electrical Insulation (Withdrawn 1994)
- ASTM-D2443 - Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment (Withdrawn 2000)
- ASTM-D2484 - Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2020)
- ASTM-D257 - Standard Test Methods for DC Resistance or Conductance of Insulating Materials
- ASTM-D2753 - Specification for Electrolytic Capacitor Paper (Withdrawn 1993)
- ASTM-D295 - Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation (Withdrawn 2020)
- ASTM-D343 - Specification for 2-Ethoxyethyl Acetate (95% Grade) (Withdrawn 1980)
- ASTM-D348 - Standard Test Methods for Rigid Tubes Used for Electrical Insulation (Withdrawn 2020)
- ASTM-D349 - Standard Test Methods for Laminated Round Rods Used for Electrical Insulation (Withdrawn 2020)
- ASTM-D350 - Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
- ASTM-D351 - Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
- ASTM-D352 - Standard Test Methods for Pasted Mica Used in Electrical Insulation
- ASTM-D372 - Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation (Withdrawn 2012)
- ASTM-D374 - Standard Test Methods for Thickness of Solid Electrical Insulation
- ASTM-D374M - Standard Test Methods for Thickness of Solid Electrical Insulation (Metric) (Withdrawn 2016)
- ASTM-D411 - Standard Test Methods for Shellac Used for Electrical Insulation (Withdrawn 2013)
- ASTM-D470 - Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
- ASTM-D495 - Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
- ASTM-D532 - Specification for Natural Rubber Jacket for Wire and Cable (Withdrawn 1996)
- ASTM-D617 - Standard Test Method for Punching Quality of Phenolic Laminated Sheets (Withdrawn 2003)
- ASTM-D619 - Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
- ASTM-D651 - Method of Test for Tensile Strength of Molded Electrical Insulating Materials (Withdrawn 1989)
- ASTM-D668 - Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation (Withdrawn 2020)
- ASTM-D669 - Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials (Withdrawn 2012)
- ASTM-D689 - Standard Test Method for Internal Tearing Resistance of Paper
- ASTM-D69 - Standard Test Methods for Friction Tapes
- ASTM-D709 - Standard Specification for Laminated Thermosetting Materials
- ASTM-D710 - Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
- ASTM-D748 - Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
- ASTM-D784 - Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation (Withdrawn 2013)
- ASTM-D828 - Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
- ASTM-D866 - Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (Withdrawn 2009)
- ASTM-D876 - Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
- ASTM-D902 - Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation (Withdrawn 2020)
- ASTM-D922 - Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
- ASTM-D952 - Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
- ASTM-D982 - Standard Test Method for Organic Nitrogen in Paper and Paperboard