Document Center List of Standards on Dental Equipment Dental Radiographic Films, See 37.040.25 Toothbrushes And Dental Floss, See 97.170
ICS Code 11.060.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-5757 - Method for determination of stiffness of the tufted area of toothbrushes
- BS-7652-1 - Prefilled syringes.
- BS-EN-1640 - Dentistry. Medical devices for dentistry. Equipment
- BS-EN-61205 - Specification for ultrasonics. Dental descaler systems. Measurement and declaration of the output characteristics
- BS-EN-61223-3-4 - Evaluation and routine testing in medical imaging departments
- BS-EN-ISO-10323 - Dentistry. Bore diameters for rotary instruments such as discs and wheels
- BS-EN-ISO-10637 - Dentistry. Central suction source equipment
- BS-EN-ISO-10637-TC - Tracked Changes. Dentistry. Central suction source equipment
- BS-EN-ISO-10650 - Dentistry. Powered polymerization activators
- BS-EN-ISO-10650-1 - Dentistry. Powered polymerization activators
- BS-EN-ISO-10650-2 - Dentistry. Powered polymerization activators
- BS-EN-ISO-10650-TC - Tracked Changes. Dentistry. Powered polymerization activators
- BS-EN-ISO-11143 - Dental equipment. Amalgam separators
- BS-EN-ISO-11144 - Dental equipment. Connections for supply and waste lines
- BS-EN-ISO-11499 - Dentistry. Single-use cartridges for local anaesthetics
- BS-EN-ISO-13078 - Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple
- BS-EN-ISO-13295 - Dentistry. Mandrels for rotary instruments
- BS-EN-ISO-13397-2 - Dentistry. Periodontal curettes, dental scalers and excavators
- BS-EN-ISO-13397-5 - Dentistry. Periodontal curettes, dental scalers and excavators
- BS-EN-ISO-15098 - Dentistry. Dental tweezers
- BS-EN-ISO-16635-1 - Dentistry. Dental rubber dam technique
- BS-EN-ISO-16635-2 - Dentistry. Dental rubber dam instruments
- BS-EN-ISO-16954 - Dentistry. Test methods for dental unit waterline biofilm treatment
- BS-EN-ISO-17509 - Dentistry. Torque transmitter for handpieces
- BS-EN-ISO-1797 - Dentistry. Shanks for rotary and oscillating instruments
- BS-EN-ISO-1797-1 - Dentistry. Shanks for rotary instruments
- BS-EN-ISO-1797-3 - Dentistry. Shanks for rotary instruments
- BS-EN-ISO-18556 - Dentistry. Intraoral spatulas
- BS-EN-ISO-19715 - Dentistry. Filling instrument with contra angle
- BS-EN-ISO-20569 - Dentistry. Trephine burs
- BS-EN-ISO-20570 - Dentistry. Oral surgical scalpel handle
- BS-EN-ISO-20608 - Dentistry. Powder jet handpieces and powders
- BS-EN-ISO-21530 - Dentistry. Materials used for dental equipment surfaces. Determination of resistance to chemical disinfectants
- BS-EN-ISO-21533 - Dentistry. Reprocessable cartridge syringes for intraligamentary injections
- BS-EN-ISO-2157 - Dentistry. Nominal diameters and designation code numbers for rotary instruments
- BS-EN-ISO-2157-TC - Tracked Changes. Dentistry. Nominal diameters and designation code numbers for rotary instruments
- BS-EN-ISO-21671 - Dentistry. Rotary polishers
- BS-EN-ISO-21850-1 - Dentistry. Materials for dental instruments
- BS-EN-ISO-22052 - Dentistry. Central compressed air source equipment
- BS-EN-ISO-22570 - Dentistry. Spoons and bone curettes
- BS-EN-ISO-23402-1 - Dentistry. Portable dental equipment for use in non-permanent healthcare environment
- BS-EN-ISO-23450 - Dentistry. Intraoral camera
- BS-EN-ISO-3630-2 - Dentistry Endodontic instruments
- BS-EN-ISO-3630-2-TC - Tracked Changes. Dentistry. Endodontic instruments
- BS-EN-ISO-3630-3-TC - Tracked Changes. Dentistry. Endodontic instruments
- BS-EN-ISO-3964 - Dentistry. Coupling dimensions for handpiece connectors
- BS-EN-ISO-4073 - Dentistry. Information system on the location of dental equipment in the working area of the oral health care provider
- BS-EN-ISO-4865-1 - Dentistry. General requirements of hand instruments
- BS-EN-ISO-5467-1 - Dentistry. Mobile dental units and dental patient chairs
- BS-EN-ISO-5467-1-TC - Tracked Changes. Dentistry. Mobile dental units and dental patient chairs
- BS-EN-ISO-5467-2 - Dentistry. Mobile dental units and dental patient chairs
- BS-EN-ISO-7493 - Dentistry. Operator's stool
- BS-EN-ISO-7494 - Dental units
- BS-EN-ISO-7494-1 - Dentistry. Stationary dental units and dental patient chairs
- BS-EN-ISO-7494-2 - Dentistry. Stationary dental units and dental patient chairs
- BS-EN-ISO-7494-2-TC - Tracked Changes. Dentistry. Stationary dental units and dental patient chairs
- BS-EN-ISO-7711-1-TC - Tracked Changes. Dentistry. Diamond rotary instruments
- BS-EN-ISO-7711-3 - Dentistry. Diamond rotary instruments
- BS-EN-ISO-7787-3 - Dentistry. Laboratory cutters
- BS-EN-ISO-7885 - Dentistry. Sterile injection needles for single use
- BS-EN-ISO-8325-TC - Tracked Changes. Dentistry. Test methods for rotary instruments
- BS-EN-ISO-9168 - Dentistry. Hose connectors for air driven dental handpieces
- BS-EN-ISO-9173-1 - Dentistry. Extraction forceps
- BS-EN-ISO-9173-2 - Dentistry. Extraction forceps
- BS-EN-ISO-9173-3 - Dentistry. Extraction forceps
- BS-EN-ISO-9680 - Dentistry. Operating lights
- BS-EN-ISO-9680-TC - Tracked Changes. Dentistry. Operating lights
- BS-EN-ISO-9687 - Dentistry. Graphical symbols for dental equipment
- BS-EN-ISO-9873 - Dentistry. Intra-oral mirrors
- BS-EN-ISO-9997 - Dentistry. Cartridge syringes
- BS-IEC-61223-2-7 - Evaluation and routine testing in medical imaging departments. Constancy tests
- BS-ISO-11040-1 - Prefilled syringes
- BS-ISO-11040-3 - Prefilled syringes
- BS-ISO-16635-1 - Dentistry. Dental rubber dam technique. Hole punch
- DD-ISO-11080 - Dentistry. Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water
- PD-CR-12401 - Dentistry - Guidance on the Classification of Dental Devices & Accessories
- PD-ISO-3630-6 - Dentistry. Endodontic instruments
IEC:
ISO:
- ISO-10323 - Dentistry - Bore diameters for rotary instruments such as discs and wheels
- ISO-10637 - Dentistry - Central suction source equipment
- ISO-10650 - Dentistry - Powered polymerization activators
- ISO-10650-1 - Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps
- ISO-10650-2 - Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps
- ISO-11040-1 - Prefilled syringes - Part 1: Glass cylinders for dental local anaesthetic cartridges
- ISO-11040-2 - Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges
- ISO-11040-3 - Prefilled syringes - Part 3: Seals for dental local anaesthetic cartridges
- ISO-11080 - Dentistry - Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water
- ISO-11143 - Dentistry - Amalgam separators
- ISO-11144 - Dental equipment - Connections for supply and waste lines
- ISO-11498 - Dental handpieces - Dental low-voltage electrical motors
- ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics
- ISO-13078 - Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
- ISO-13294 - Dental handpieces -- Dental air-motors
- ISO-13295 - Dentistry - Mandrels for rotary instruments
- ISO-13397-1 - Periodontal curettes, dental scalers and excavators -- Part 1: General requirements
- ISO-13397-2 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type
- ISO-13397-2-AM1 - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes - Gr-type - Amendment 1: Colour coding
- ISO-13397-3 - Periodontal curettes, dental scalers and excavators -- Part 3: Dental scalers -- H-type
- ISO-13397-4 - Periodontal curettes, dental scalers and excavators -- Part 4: Dental excavators -- Discoid-type
- ISO-13397-5 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette scalers
- ISO-13402 - Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure
- ISO-15087-1 - Dental elevators -- Part 1: General requirements
- ISO-15087-2 - Dental elevators -- Part 2: Warwick James elevators
- ISO-15087-3 - Dental elevators -- Part 3: Cryer elevators
- ISO-15087-4 - Dental elevators -- Part 4: Coupland elevators
- ISO-15087-5 - Dental elevators -- Part 5: Bein elevators
- ISO-15087-6 - Dental elevators -- Part 6: Flohr elevators
- ISO-15098 - Dentistry - Dental tweezers
- ISO-15098-1 - Dental tweezers -- Part 1: General requirements
- ISO-15098-2 - Dental tweezers - Part 2: Meriam types
- ISO-15098-3 - Dental tweezers - Part 3: College types
- ISO-15606 - Dental handpieces -- Air-powered scalers and scaler tips
- ISO-16635-1 - Dentistry - Dental rubber dam technique - Part 1: Hole punch
- ISO-16635-2 - Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps
- ISO-16954 - Dentistry - Test methods for dental unit waterline biofilm treatment
- ISO-17509 - Dentistry - Torque transmitter for handpieces
- ISO-1797 - Dentistry - Shanks for rotary and oscillating instruments
- ISO-1797-1 - Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals
- ISO-1797-1-1 - Amendment
- ISO-1797-2 - Dental rotary instruments -- Shanks -- Part 2: Shanks made of plastics
- ISO-1797-3 - Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics
- ISO-18556 - Dentistry - Intraoral spatulas
- ISO-1942-3 - Dental vocabulary -- Part 3: Dental instruments
- ISO-1942-3-1 - Amendment 1 to ISO 1942-3:1989
- ISO-1942-3-2 - Amendment 2 to ISO 1942-3:1989
- ISO-1942-4 - Dental vocabulary -- Part 4: Dental equipment
- ISO-1942-4-1 - Amendment 1 to ISO 1942-4:1989
- ISO-19715 - Dentistry - Filling instrument with contra angle
- ISO-20569 - Dentistry - Trephine burs
- ISO-20570 - Dentistry - Oral surgical scalpel handle
- ISO-20608 - Dentistry - Powder jet handpieces and powders
- ISO-21530 - Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
- ISO-21533 - Dentistry - Reprocessable cartridge syringes for intraligamentary injections
- ISO-2157 - Dentistry - Nominal diameters and designation code numbers for rotary instruments
- ISO-21671 - Dentistry - Rotary polishers
- ISO-21671-AM1 - Dentistry - Rotary polishers - Amendment 1
- ISO-21850-1 - Dentistry - Materials for dental instruments - Part 1: Stainless steel
- ISO-22052 - Dentistry - Central compressed air source equipment
- ISO-22570 - Dentistry - Spoons and bone curettes
- ISO-22595-1 - Dentistry - Plant area equipment - Part 1: Suction systems
- ISO-22595-2 - Dentistry - Plant area equipment - Part 2: Compressor systems
- ISO-23402-1 - Dentistry - Portable dental equipment for use in non?permanent healthcare environment - Part 1: General requirements
- ISO-23450 - Dentistry - Intraoral camera
- ISO-27020 - Dentistry - Brackets and tubes for use in orthodontics
- ISO-3630-1 - Dentistry - Endodontic instruments - Part 1: General requirements
- ISO-3630-2 - Dentistry - Endodontic instruments - Part 2: Enlargers
- ISO-3630-3 - Dentistry - Endodontic instruments - Part 3: Compactors
- ISO-3630-4 - Dentistry - Endodontic instruments - Part 4: Auxiliary instruments
- ISO-3630-5 - Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments
- ISO-3630-6 - Dentistry - Endodontic instruments - Part 6: Numeric coding system
- ISO-3823-1 - Dental rotary instruments -- Burs -- Part 1: Steel and carbide burs
- ISO-3823-2 - Dentistry - Rotary bur instruments - Part 2: Finishing burs
- ISO-3823-2-1 - Dental rotary instruments - Part 2: Steel and carbide finishing burs - Amendment 1
- ISO-3964 - Dentistry - Coupling dimensions for handpiece connectors
- ISO-3964-AM1 - Dentistry - Coupling dimensions for handpiece connectors AMENDMENT 1
- ISO-4073 - Dentistry - Information system on the location of dental equipment in the working area of the oral health care provider
- ISO-4865-1 - Dentistry - General requirements of hand instruments - Part 1: Non-hinged hand instruments
- ISO-5467-1 - Dentistry - Mobile dental units and dental patient chairs - Part 1: General requirements
- ISO-5467-2 - Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems
- ISO-6360-1/1 - Addendum 1 for ISO-6360-1: Part 1: General Characteristics -Dental Rotary Instruments - N
- ISO-6875 - Dentistry - Patient chair
- ISO-7488 - Dentistry - Mixing machines for dental amalgam
- ISO-7492 - Dentistry - Dental explorer
- ISO-7493 - Dentistry - Operators stool
- ISO-7494 - Dental units
- ISO-7494-1 - Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements
- ISO-7494-2 - Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems
- ISO-7711-1 - Dentistry - Diamond rotary instruments - Part 1: General requirements
- ISO-7711-1-1 - Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging - Amendment 1
- ISO-7711-2 - Dentistry - Rotary diamond instruments - Part 2: Discs
- ISO-7711-3 - Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code
- ISO-7785-1 - Dental handpieces -- Part 1: High-speed air turbine handpieces
- ISO-7785-2 - Dental handpieces -- Part 2: Straight and geared angle handpieces
- ISO-7786 - Dental rotary instruments -- Laboratory abrasive instruments
- ISO-7787-1 - Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters
- ISO-7787-2 - Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters
- ISO-7787-3 - Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines
- ISO-7787-4 - Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters
- ISO-7885 - Dentistry - Sterile injection needles for single use
- ISO-8282 - Dental equipment -- Mercury and alloy mixers and dispensers
- ISO-8325 - Dentistry - Test methods for rotary instruments
- ISO-8627 - Dentistry -- Stiffness of the tufted area of tooth-brushes
- ISO-9168 - Dentistry - Hose connectors for air driven dental handpieces
- ISO-9173-1 - Dentistry - Extraction forceps - Part 1: General requirements
- ISO-9173-2 - Dentistry - Extraction forceps - Part 2: Designation
- ISO-9173-3 - Dentistry - Extraction forceps - Part 3: Design
- ISO-9680 - Dentistry - Operating lights
- ISO-9687 - Dentistry - Graphical symbols for dental equipment
- ISO-9687-AM1 - - Amendment 1
- ISO-9873 - Dentistry - Intra-oral mirrors
- ISO-9997 - Dentistry - Cartridge syringes
Other SDOs:
- DIN-13902-1 - Dentistry - Terminology of oral implantology - Part 1: Endosseous dental implant systems
- DIN-13902-2 - Dentistry - Terminology of oral implantology - Part 2: Instruments and dental laboratory parts
- DIN-13905-1 - Dentistry - Dental furnace - Part 1: Dynamic test method for temperature measurement with separate thermocouple
- DIN-13905-2 - Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze
- DIN-13940-1 - Dentistry; dental handpieces; coupling dimensions (ISO 3964:1982); german version EN 23964:1989
- DIN-13954-1 - Dentistry; dental rotary instruments; cutters; part 1: steel laboratory cutters (ISO 7787-1:1984); german version EN 27787-1:1990
- DIN-13977 - Dentistry - Heidemann spatulas
- DIN-13979 - Dentistry - Cement spatulas
- DIN-6868-151 - Image Quality Assurance In Diagnostic X-ray Departments - Part 151: Acceptance Testing Of Dental Radiographic Equipment Accordance To Rv - Rules For The Inspection Of Image Quality After Installation, Maintenance And Modification
- DIN-EN-1639 - Dentistry - Medical devices for dentistry - Instruments; German version EN 1639:2009
- DIN-EN-1640 - Dentistry - Medical devices for dentistry - Equipment
- DIN-EN-27787-3 - Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines (ISO 7787-3:1991); German version EN 27787-3:1993
- DIN-EN-61205 - Ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics (IEC 61205:1993); German version EN 61205:1994
- DIN-EN-ISO-10323 - Dentistry - Bore diameters for rotary instruments such as discs and wheels (ISO 10323:2013)
- DIN-EN-ISO-10637 - Dental equipment - High- and medium-volume suction systems (ISO 10637:1999); English version of DIN EN ISO 10637
- DIN-EN-ISO-10650-1 - Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps
- DIN-EN-ISO-10650-2 - Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps
- DIN-EN-ISO-11143 - Dentistry - Amalgam separators (ISO 11143:2008)
- DIN-EN-ISO-11144 - Dental equipment - Connections for supply and waste lines
- DIN-EN-ISO-11498 - Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997)
- DIN-EN-ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics
- DIN-EN-ISO-13294 - Dental handpieces - Dental air-motors (ISO 13294:1997)
- DIN-EN-ISO-13295 - Dentistry - Mandrels for rotary instruments (ISO 13295:2007)
- DIN-EN-ISO-13397-1 - Peridontal curettes, dental scalers and excavators - General requirements (ISO 13397-1:1995)
- DIN-EN-ISO-13397-2 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type - Colour coding (ISO 13397-2:2005 + Amd 1:2012)
- DIN-EN-ISO-13397-3 - Periodontal curettes, dental scalers and excavators - Part 3:H-type dental scalers (ISO 13397-3:1996)
- DIN-EN-ISO-13397-4 - Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators, discoid type (ISO 13397-4:1997)
- DIN-EN-ISO-13402 - Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); English version of DIN EN ISO 13402
- DIN-EN-ISO-15087-1 - Dental elevators - Part 1: General requirements (ISO 15087-1:1999); English version of DIN EN ISO 15087-1
- DIN-EN-ISO-15087-2 - Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); English version of DIN EN ISO 15087-2
- DIN-EN-ISO-15087-3 - Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); English version of DIN EN ISO 15087-3
- DIN-EN-ISO-15087-4 - Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); English version of DIN EN ISO 15087-4
- DIN-EN-ISO-15087-5 - Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); English version of DIN EN ISO 15087-5
- DIN-EN-ISO-15087-6 - Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); English version of DIN EN ISO 15087-6
- DIN-EN-ISO-15098-1 - Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); English version of DIN EN ISO 15098-1
- DIN-EN-ISO-15098-2 - Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); English version of DIN EN ISO 15098-2
- DIN-EN-ISO-15098-3 - Dental tweezers - Part 3: College types (ISO 15098-3:2000); English version of DIN EN ISO 15098-3
- DIN-EN-ISO-15606 - Dental handpieces - Air-powered scalers and scaler tips
- DIN-EN-ISO-16408 - Dentistry - Oral care products - Oral rinses
- DIN-EN-ISO-16443 - Dentistry - Vocabulary for dental implants systems and related procedure
- DIN-EN-ISO-1797-2 - Dental rotary instruments - Shanks made of plastics (ISO 1797-2:1992)
- DIN-EN-ISO-20608 - Dentistry - Powder jet handpieces and powders (ISO 20608:2018); German version EN ISO 20608:2018
- DIN-EN-ISO-21530 - Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004)
- DIN-EN-ISO-21533 - Dentistry, Reusable Cartridge Syringes Intended for Intraligamentary Injections
- DIN-EN-ISO-2157 - Dentistry - Nominal diameters and designation code numbers for rotary instruments
- DIN-EN-ISO-3630-2 - Dentistry - Endodontic instruments - Part 2: Enlargers (ISO 3630-2:2013)
- DIN-EN-ISO-3630-3 - Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and spreaders
- DIN-EN-ISO-3823-1 - Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997)
- DIN-EN-ISO-3823-2 - Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003+Amd 1:2008) (includes Amendment A1:2008)
- DIN-EN-ISO-4073 - Dentistry - Information System on the Location of Dental Equipment in the Working Area
- DIN-EN-ISO-7493 - Dentistry - Operator's Stool
- EN-1640 - Dentistry - Medical Devices for Dentistry - Equipment
- EN-ISO-10323 - Dentistry - Bore diameters for rotary instruments such as discs and wheels (ISO 10323:2013)
- EN-ISO-10650 - Dentistry - Powered polymerization activators
- EN-ISO-10650-1 - Part 1: Quartz Tungsten Halogen Lamps, Dentistry - Powered Polymerization Activators
- EN-ISO-10650-2 - Dentistry, Powered Polymerization Activators, Light-Emitting Diode (Led) Lamps
- EN-ISO-11143 - Dentistry - Amalgam Separators
- EN-ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics
- EN-ISO-13078 - Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013)
- EN-ISO-13295 - Dentistry - Mandrels for Rotary Instruments
- EN-ISO-13397-2 - Periodontal curettes, dental scalers and excavators. Periodontal curettes. Gr-type
- EN-ISO-13397-5 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette scalers
- EN-ISO-16635-1 - Dentistry - Dental rubber dam technique - Part 1: Hole punch
- EN-ISO-16635-2 - Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps
- EN-ISO-16954 - Dentistry - Test methods for dental unit waterline biofilm treatment
- EN-ISO-17509 - Dentistry - Torque transmitter for handpieces
- EN-ISO-1797 - Dentistry - Shanks for rotary and oscillating instruments
- EN-ISO-1797-1 - Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals
- EN-ISO-1797-3 - Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013)
- EN-ISO-18556 - Dentistry - Intraoral spatulas
- EN-ISO-19715 - Dentistry - Filling instrument with contra angle
- EN-ISO-20569 - Dentistry - Trephine burs
- EN-ISO-20570 - Dentistry - Oral surgical scalpel handle
- EN-ISO-20608 - Dentistry - Powder jet handpieces and powders
- EN-ISO-21530 - Dentistry, Materials Used for Dental Equipment Surfaces, Determination of Resistance T
- EN-ISO-21533 - Dentistry, Reusable Cartridge Syringes Intended for Intraligamentary Injections
- EN-ISO-2157 - Dentistry - Nominal diameters and designation code numbers for rotary instruments
- EN-ISO-21671 - Dentistry - Rotary Polishers
- EN-ISO-3630-2 - Dentistry - Endodontic instruments - Part 2: Enlargers (ISO 3630-2:2013)
- EN-ISO-3630-3 - Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and spreaders
- EN-ISO-3630-5 - Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments
- EN-ISO-3823-2 - Part 2: Finishing Burs, Dentistry, Rotary Bur Instruments
- EN-ISO-4073 - Dentistry - Information System on the Location of Dental Equipment in the Working Area
- EN-ISO-6875 - Dentistry - Patient chair
- EN-ISO-7493 - Dentistry - Operator's Stool
- EN-ISO-7494-1 - Dentistry - Dental units - Part 1: General requirements and test methods
- EN-ISO-7494-2 - Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems
- EN-ISO-7711-2 - Dentistry - Rotary diamond instruments - Part 2: Discs
- EN-ISO-7711-3 - Part 3: Grit Sizes, Designation & Colour Code, Dentistry, Diamond Rotary Instruments
- EN-ISO-7787-1 - Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters
- EN-ISO-7787-3 - Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines
- EN-ISO-7885 - Dentistry - Sterile injection needles for single use
- EN-ISO-8325 - Dentistry - Test Methods for Rotary Instruments
- EN-ISO-9168 - Dentistry - Hose Connectors for Air Driven Dental Handpieces
- EN-ISO-9173-1 - Dentistry - Extraction forceps - Part 1: General requirements
- EN-ISO-9173-2 - Dentistry, Extraction Forceps, Designation
- EN-ISO-9173-3 - Dentistry - Extraction forceps - Part 3: Design
- EN-ISO-9680 - Dentistry - Operating lights
- EN-ISO-9687 - Dentistry - Graphical symbols for dental equipment
- EN-ISO-9873 - Dentistry - Intra-oral mirrors
- SS-8627 - Dentistry - Stiffness of the tufted area of tooth-brushes
- SS-8755103 - Dental operator's stool
- SS-EN-1640 - Dentistry - Medical devices for dentistry - Equipment
- SS-EN-21942-3 - Dental vocabulary - Part 3: Dental instruments (ISO 1942-3:1989)
- SS-EN-21942-4 - Dental vocabulary - Part 4: Dental equipment (ISO 1942-4:1989)
- SS-EN-23630-2 - Dental root canal instruments - Part 2: Enlargers
- SS-EN-23823-1 - Dental rotary instruments - Part 1: Steel and carbide burs (ISO 3823-1:1986)
- SS-EN-23823-2 - Dental rotary instruments - Part 2: Steel and carbide finishing burs (ISO 3823-2:1986)
- SS-EN-23964 - Dentistry - Dental handpieces - Coupling dimensions (ISO 3964:1982)
- SS-EN-26360-2 - Dentistry - Dental rotary instruments - Number coding system - Part 2: Shape and specific characteristics (ISO 6360-2:1986)
- SS-EN-27493 - Dentistry - Dental operator's stool (ISO 7493:1985)
- SS-EN-27711 - Dentistry - Dental rotary instruments - Diamond instruments (ISO 7711:1984)
- SS-EN-27785-1 - Dental - Handpieces - Part 1: High-speed air-turbine handpieces (ISO 7785-1:1992)
- SS-EN-27785-2 - Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1991)
- SS-EN-27786 - Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:1990)
- SS-EN-27787-3 - Dental rotary instruments - Cutters - Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991)
- SS-EN-29168 - Dental handpieces - Hose connectors (ISO 9168:1991)
- SS-EN-29873 - Rensable metal dental mirrors and handles (ISO 9873:1990)
- SS-EN-29997 - Dental cartridge syringes
- SS-EN-ISO-10323 - Dentistry - Bore diameters for rotary instruments such as discs and wheels (ISO 10323:2013)
- SS-EN-ISO-10637 - Dentistry - Central suction source equipment (ISO 10637:2018)
- SS-EN-ISO-10650 - Dentistry - Powered polymerization activators (ISO 10650:2018)
- SS-EN-ISO-10650-1 - Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004)
- SS-EN-ISO-10650-2 - Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps (ISO 10650-2:2007)
- SS-EN-ISO-11143 - Dentistry - Amalgam separators (ISO 11143:2008)
- SS-EN-ISO-11144 - Dental equipment - Connections for supply and waste lines (ISO 11144:1995)
- SS-EN-ISO-11498 - Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997)
- SS-EN-ISO-11499 - Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014)
- SS-EN-ISO-13078 - Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013)
- SS-EN-ISO-13294 - Dental handpieces - Dental air-motors (ISO 13294:1997)
- SS-EN-ISO-13295 - Dentistry - Mandrels for rotary instruments (ISO 13295:2007)
- SS-EN-ISO-13397-1 - Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13 397-1:1995)
- SS-EN-ISO-13397-2 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type (ISO 13397-2:2005)
- SS-EN-ISO-13397-2-AM1 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type - Amendment 1: Colour coding (ISO 13397-2:2005/Amd 1:2012)
- SS-EN-ISO-13397-3 - Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers H-type (ISO 13397-3:1996)
- SS-EN-ISO-13397-4 - Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO13397-4:1997)
- SS-EN-ISO-13397-5 - Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette scalers (ISO 13397-5:2015)
- SS-EN-ISO-13402 - Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995)
- SS-EN-ISO-14727 - Dental implants - Prefabricated parts connecting suprastructures to dental implants - Contents of technical file (ISO 14727:1998)
- SS-EN-ISO-15087-1 - Dental elevators - Part 1: General requirements (ISO 15087-1:1999)
- SS-EN-ISO-15087-2 - Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000)
- SS-EN-ISO-15087-3 - Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000)
- SS-EN-ISO-15087-4 - Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000)
- SS-EN-ISO-15087-5 - Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000)
- SS-EN-ISO-15087-6 - Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000)
- SS-EN-ISO-15098 - Dentistry - Dental tweezers (ISO 15098:2020)
- SS-EN-ISO-15098-1 - Dental tweezers - Part 1: General requirements (ISO 15098-1:1999)
- SS-EN-ISO-15098-2 - Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000)
- SS-EN-ISO-15606 - Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999)
- SS-EN-ISO-1562 - Dentistry - Casting gold alloys (ISO 1562:2004)
- SS-EN-ISO-16635-1 - Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013)
- SS-EN-ISO-16635-2 - Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps (ISO 16635-2:2014)
- SS-EN-ISO-16954 - Dentistry - Test methods for dental unit waterline biofilm treatment (ISO 16954:2015)
- SS-EN-ISO-17509 - Dentistry - Torque transmitter for handpieces (ISO 17509:2016)
- SS-EN-ISO-1797 - Dentistry - Shanks for rotary and oscillating instruments (ISO 1797:2017)
- SS-EN-ISO-1797-1 - Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011)
- SS-EN-ISO-1797-1-AM1 - Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992/Amd 1:1997)
- SS-EN-ISO-1797-2 - Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992)
- SS-EN-ISO-1797-3 - Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013)
- SS-EN-ISO-18556 - Dentistry - Intraoral spatulas (ISO 18556:2016)
- SS-EN-ISO-19715 - Dentistry - Filling instrument with contra angle (ISO 19715:2017)
- SS-EN-ISO-20569 - Dentistry - Trephine burs (ISO 20569:2018)
- SS-EN-ISO-20570 - Dentistry - Oral surgical scalpel handle (ISO 20570:2018)
- SS-EN-ISO-20608 - Dentistry - Powder jet handpieces and powders (ISO 20608:2018)
- SS-EN-ISO-21533 - Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018)
- SS-EN-ISO-2157 - Dental rotary instruments - Nominal diameters anddesignation code number (ISO 2157:1992)
- SS-EN-ISO-21671 - Dentistry - Rotary polishers (ISO 21671:2006)
- SS-EN-ISO-21671-AM1 - Dentistry - Rotary polishers - Amendment 1 (ISO 21671:2006/AMD1)
- SS-EN-ISO-21850-1 - Dentistry - Materials for dental instruments - Part 1: Stainless steel (ISO 21850-1:2020)
- SS-EN-ISO-22052 - Dentistry - Central compressed air source equipment (ISO 22052:2020)
- SS-EN-ISO-22367 - Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
- SS-EN-ISO-22570 - Dentistry - Spoons and bone curettes (ISO 22570:2020)
- SS-EN-ISO-23402-1 - Dentistry - Portable dental equipment for use in non-permanent healthcare environment - Part 1: General requirements (ISO 23402-1:2020)
- SS-EN-ISO-23450 - Dentistry - Intraoral camera (ISO 23450:2021)
- SS-EN-ISO-27020 - Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019)
- SS-EN-ISO-28888 - Dentistry - Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013)
- SS-EN-ISO-3630-1 - Dentistry - Endodontic instruments - Part 1: General requirements (ISO 3630-1:2019)
- SS-EN-ISO-3630-2 - Dentistry - Endodontic instruments - Part 2: Enlargers (ISO 3630-2:2013)
- SS-EN-ISO-3630-3 - Dentistry - Endodontic instruments - Part 3: Compactors (ISO 3630-3:2021)
- SS-EN-ISO-3630-4 - Dentistry - Endodontic instruments - Part 4: Auxiliary instruments (ISO 3630-4:2023)
- SS-EN-ISO-3630-5 - Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2020)
- SS-EN-ISO-3665 - Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011)
- SS-EN-ISO-3823-1 - Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997)
- SS-EN-ISO-3823-2 - Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003)
- SS-EN-ISO-3823-2-AM1 - Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003/Amd 1:2008)
- SS-EN-ISO-4073 - Dentistry - Information system on the location of dental equipment in the working area of the oral health care provider (ISO 4073:2009)
- SS-EN-ISO-4865-1 - Dentistry - General requirements of hand instruments - Part 1: Non-hinged hand instruments (ISO 4865-1:2023)
- SS-EN-ISO-5467-1 - Dentistry - Mobile dental units and dental patient chairs - Part 1: General requirements (ISO 5467-1:2022)
- SS-EN-ISO-5467-2 - Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems (ISO 5467-2:2022)
- SS-EN-ISO-6875 - Dentistry - Patient chair (ISO 6875:2011)
- SS-EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
- SS-EN-ISO-7488 - Dentistry - Mixing machines for dental amalgam (ISO 7488:2018)
- SS-EN-ISO-7492 - Dentistry - Dental explorer (ISO 7492:2019)
- SS-EN-ISO-7493 - Dentistry - Operator's stool (ISO 7493:2006)
- SS-EN-ISO-7494 - Dental units (ISO 7494:1996)
- SS-EN-ISO-7494-1 - Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements (ISO 7494-1:2018)
- SS-EN-ISO-7494-2 - Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems (ISO 7494-2:2022)
- SS-EN-ISO-75-1 - Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
- SS-EN-ISO-7711-1 - Dentistry - Diamond rotary instruments - Part 1: General requirements (ISO 7711-1:2021)
- SS-EN-ISO-7711-1-AM1 - Dental rotary instruments - Diamond instruments - Part 1 Dimensions, requirements, marking and packaging - Amendment 1 (ISO 7711-1:1998/Amd 1:2009)
- SS-EN-ISO-7711-2 - Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
- SS-EN-ISO-7711-3 - Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004)
- SS-EN-ISO-7785-1 - Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997)
- SS-EN-ISO-7785-2 - Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995)
- SS-EN-ISO-7786 - Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001)
- SS-EN-ISO-7787-2 - Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2020)
- SS-EN-ISO-7787-3 - Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines (ISO 7787-3:2017)
- SS-EN-ISO-7787-4 - Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002)
- SS-EN-ISO-7885 - Dentistry - Sterile injection needles for single use (ISO 7885:2010)
- SS-EN-ISO-8282 - Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994)
- SS-EN-ISO-8325 - Dentistry - Test methods for rotary instruments (ISO 8325:2023)
- SS-EN-ISO-8891 - Dental casting alloys with noble metal content of at least 25% but less than 75% (ISO 8891:1998)
- SS-EN-ISO-9168 - Dentistry - Hose connectors for air driven dental handpieces (ISO 9168:2009)
- SS-EN-ISO-9173-1 - Dentistry - Extraction forceps - Part 1: General requirements (ISO 9173-1:2016)
- SS-EN-ISO-9173-2 - Dentistry - Extraction forceps - Part 2: Designation (ISO 9173-2:2010)
- SS-EN-ISO-9173-3 - Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)
- SS-EN-ISO-9680 - Dentistry - Operating lights (ISO 9680:2021)
- SS-EN-ISO-9687 - Dentistry - Graphical symbols for dental equipment (ISO 9687:2015)
- SS-EN-ISO-9873 - Dentistry - Intra-oral mirrors (ISO 9873:2019)
- SS-EN-ISO-9997 - Dentistry - Cartridge syringes (ISO 9997:2020)
- UNE-EN-ISO-10650 - Dentistry - Powered polymerization activators
- UNE-EN-ISO-13078-2 - Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze
- UNE-EN-ISO-3630-3 - Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and spreaders