Document Center is acquired by Nimonik

Document Center List of Standards on Examination Of Water For Chemical Substances

ICS Code 13.060.50

Return to ICS Index.

Up to Level 2:

• 13.060 (Water quality Including toxicity, biodegradability, protection against pollution, related installations and equipment Standards for examination of water should be classified under sub-groups according to their type of water)

The following documents are a part of this series:

ASTM:

• ASTM-C1416 - Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence (Withdrawn 2014)
• ASTM-D1067 - Standard Test Methods for Acidity or Alkalinity of Water
• ASTM-D1068 - Standard Test Methods for Iron in Water
• ASTM-D1126 - Standard Test Method for Hardness in Water
• ASTM-D1179 - Standard Test Methods for Fluoride Ion in Water
• ASTM-D1245 - Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
• ASTM-D1246 - Standard Test Method for Bromide Ion in Water
• ASTM-D1252 - Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
• ASTM-D1253 - Standard Test Method for Residual Chlorine in Water
• ASTM-D1291 - Standard Practice for Estimation of Chlorine Demand of Water
• ASTM-D1292 - Standard Test Method for Odor in Water 
• ASTM-D1293 - Standard Test Methods for pH of Water
• ASTM-D1385 - Standard Test Method for Hydrazine in Water
• ASTM-D1426 - Standard Test Methods for Ammonia Nitrogen In Water
• ASTM-D1429 - Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022)
• ASTM-D1687 - Standard Test Methods for Chromium in Water
• ASTM-D1688 - Standard Test Methods for Copper in Water
• ASTM-D1691 - Standard Test Methods for Zinc in Water
• ASTM-D1783 - Standard Test Methods for Phenolic Compounds in Water
• ASTM-D1886 - Standard Test Methods for Nickel in Water
• ASTM-D1942 - Method of Test for Morpholine in Water (Withdrawn 1989)
• ASTM-D2036 - Standard Test Methods for Cyanides in Water
• ASTM-D2184 - Methods of Testing Deuterium Oxide (Withdrawn 1986)
• ASTM-D2186 - Standard Test Methods for Deposit-Forming Impurities in Steam (Withdrawn 2014)
• ASTM-D2330 - Standard Test Method for Methylene Blue Active Substances
• ASTM-D2333 - Method of Test for Thorium in Water (Withdrawn 1986)
• ASTM-D2460 - Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022)
• ASTM-D2580 - Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021)
• ASTM-D2777 - Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
• ASTM-D2791 - Standard Test Method for On-Line Determination of Sodium in Water
• ASTM-D2907 - Standard Test Methods for Microquantities of Uranium in Water by Fluorometry (Withdrawn 2003)
• ASTM-D2908 - Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
• ASTM-D2910 - Method for Removal of Organic Matter from Water by Activated Carbon Absorption (Withdrawn 1991)
• ASTM-D2972 - Standard Test Methods for Arsenic in Water
• ASTM-D3082 - Standard Test Method for Boron in Water
• ASTM-D3084 - Standard Practice for Alpha-Particle Spectrometry of Water
• ASTM-D3086 - Test Method for Organochlorine Pesticides in Water (Withdrawn 1996)
• ASTM-D3113 - Standard Test Methods for Sodium Salts of EDTA in Water (Withdrawn 2005)
• ASTM-D3223 - Standard Test Method for Total Mercury in Water
• ASTM-D3352 - Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
• ASTM-D3371 - Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography (Withdrawn 2002)
• ASTM-D3372 - Standard Test Method for Molybdenum in Water
• ASTM-D3373 - Standard Test Method for Vanadium in Water
• ASTM-D3454 - Standard Test Method for Radium-226 in Water
• ASTM-D3519 - Standard Test Method for Foam in Aqueous Media (Blender Test) (Withdrawn 2013)
• ASTM-D3534 - Standard Test Method for Polychlorinated Biphenyls (PCBs) in Water (Withdrawn 2004)
• ASTM-D3557 - Standard Test Methods for Cadmium in Water
• ASTM-D3558 - Standard Test Methods for Cobalt in Water
• ASTM-D3559 - Standard Test Methods for Lead in Water (Withdrawn 2024)
• ASTM-D3561 - Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
• ASTM-D3590 - Standard Test Methods for Total Kjeldahl Nitrogen in Water
• ASTM-D3601 - Standard Test Method for Foam In Aqueous Media (Bottle Test) (Withdrawn 2013)
• ASTM-D3645 - Standard Test Methods for Beryllium in Water
• ASTM-D3651 - Standard Test Method for Barium in Brackish Water, Seawater, and Brines
• ASTM-D3695 - Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
• ASTM-D3697 - Standard Test Method for Antimony in Water
• ASTM-D3859 - Standard Test Methods for Selenium in Water
• ASTM-D3861 - Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
• ASTM-D3864 - Standard Guide for On-Line Monitoring Systems for Water Analysis
• ASTM-D3865 - Standard Test Method for Plutonium in Water (Withdrawn 2024)
• ASTM-D3866 - Standard Test Methods for Silver in Water
• ASTM-D3867 - Standard Test Methods for Nitrite-Nitrate in Water
• ASTM-D3868 - Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
• ASTM-D3869 - Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
• ASTM-D3871 - Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
• ASTM-D3875 - Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
• ASTM-D3919 - Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
• ASTM-D3920 - Standard Test Method for Strontium in Water
• ASTM-D3921 - Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
• ASTM-D3972 - Standard Test Method for Isotopic Uranium in Water by Radiochemistry (Withdrawn 2024)
• ASTM-D3973 - Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
• ASTM-D3986 - Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
• ASTM-D3987 - Standard Practice for Shake Extraction of Solid Waste with Water
• ASTM-D4012 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
• ASTM-D4025 - Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
• ASTM-D4107 - Standard Test Method for Tritium in Drinking Water
• ASTM-D4129 - Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
• ASTM-D4130 - Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines (Withdrawn 2024)
• ASTM-D4165 - Standard Test Method for Cyanogen Chloride in Water 
• ASTM-D4187 - Methods of Test for Zeta Potential of Colloids in Water and Waste Water (Withdrawn 1990)
• ASTM-D4190 - Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
• ASTM-D4191 - Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
• ASTM-D4192 - Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
• ASTM-D4193 - Standard Test Method for Thiocyanate in Water
• ASTM-D4195 - Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application
• ASTM-D4282 - Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
• ASTM-D4309 - Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
• ASTM-D4327 - Standard Test Method for Anions in Water by Suppressed Ion Chromatography
• ASTM-D4374 - Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate (Withdrawn 2013)
• ASTM-D4382 - Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
• ASTM-D4458 - Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
• ASTM-D4478 - Test Method for Oxygen Update (Withdrawn 1994)
• ASTM-D4657 - Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005)
• ASTM-D4658 - Standard Test Method for Sulfide Ion in Water (Withdrawn 2024)
• ASTM-D4691 - Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
• ASTM-D4698 - Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
• ASTM-D4763 - Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
• ASTM-D4785 - Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
• ASTM-D4922 - Standard Test Method for Determination of Radioactive Iron in Water
• ASTM-D4983 - Cyclohexylamine, Morpholine, & Diethylaminoethanol in Water& Condensed Steam by Direct Aq
• ASTM-D5091 - Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
• ASTM-D511 - Standard Test Methods for Calcium and Magnesium In Water
• ASTM-D512 - Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
• ASTM-D513 - Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
• ASTM-D515 - Test Methods for Phosphorus in Water (Withdrawn 1997)
• ASTM-D516 - Standard Test Method for Sulfate Ion in Water
• ASTM-D5172 - Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water (Withdrawn 2024)
• ASTM-D5173 - Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
• ASTM-D5174 - Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
• ASTM-D5175 - Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
• ASTM-D5176 - Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
• ASTM-D5256 - Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
• ASTM-D5412 - Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
• ASTM-D5462 - Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
• ASTM-D5463 - Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
• ASTM-D5464 - Standard Test Method for pH Measurement of Water of Low Conductivity
• ASTM-D5475 - Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector (Withdrawn 2011)
• ASTM-D5543 - Standard Test Method for Low-Level Dissolved Oxygen in Water
• ASTM-D5612 - Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
• ASTM-D5615 - Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices
• ASTM-D5627 - Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
• ASTM-D5673 - Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
• ASTM-D5811 - Standard Test Method for Strontium-90 in Water
• ASTM-D5812 - Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography (Withdrawn 2011)
• ASTM-D5877 - Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams Based on Data Analytical Calculations (Withdrawn 2014)
• ASTM-D5904 - Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM-D5997 - Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM-D6036 - Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023)
• ASTM-D6146 - Standard Guide for Monitoring Aqueous Nutrients in Watersheds
• ASTM-D6238 - Standard Test Method for Total Oxygen Demand in Water
• ASTM-D6303 - Standard Test Method for Formaldehyde in Water (Withdrawn 2007)
• ASTM-D6317 - Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM-D6363 - Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
• ASTM-D6502 - Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
• ASTM-D6508 - Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
• ASTM-D6520 - Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
• ASTM-D6581 - Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
• ASTM-D6592 - Standard Test Method for Portable Chemiluminescent Water Quality Determination (Withdrawn 2010)
• ASTM-D6697 - Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water (Withdrawn 2010)
• ASTM-D6764 - Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
• ASTM-D6889 - Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
• ASTM-D6919 - Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
• ASTM-D6994 - Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
• ASTM-D7126 - Standard Test Method for On-Line Colorimetric Measurement of Silica
• ASTM-D7237 - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM-D7284 - Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
• ASTM-D7365 - Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
• ASTM-D7485 - Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7511 - Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
• ASTM-D7535 - Standard Test Method for Lead-210 in Water (Withdrawn 2024)
• ASTM-D7573 - Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
• ASTM-D7574 - Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7575 - Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
• ASTM-D7597 - Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7598 - Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7599 - Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7600 - Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7644 - Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7645 - Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7678 - Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
• ASTM-D7731 - Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7781 - Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
• ASTM-D7903 - Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
• ASTM-D7979 - Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D8001 - Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
• ASTM-D8024 - Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
• ASTM-D8025 - Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
• ASTM-D8028 - Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
• ASTM-D8063 - Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
• ASTM-D8083 - Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
• ASTM-D8193 - Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
• ASTM-D857 - Standard Test Method for Aluminum in Water
• ASTM-D858 - Standard Test Methods for Manganese in Water
• ASTM-D859 - Standard Test Method for Silica in Water
• ASTM-D888 - Standard Test Methods for Dissolved Oxygen in Water
• ASTM-D932 - Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
• ASTM-D933 - Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
• ASTM-E2656 - Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
• ASTM-F1226 - Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
• ASTM-F1779 - Standard Practice for Reporting Visual Observations of Oil on Water from Aircraft
• ASTM-PS74 - Test Method for Oil and Grease (Solvent Extractable Substances) in Water by Gravimetric Determination (Withdrawn 2001)

BSI:

• BS-2690-102 - Methods of testing water used in industry
• BS-2690-104 - Methods of testing water used in industry
• BS-2690-115 - Methods of testing water used in industry
• BS-2690-116 - Methods of testing water used in industry
• BS-2690-117 - Methods of testing water used in industry
• BS-2690-15 - Methods of testing water used in industry
• BS-6068-2.15 - Water quality. Physical, chemical and biochemical methods
• BS-6068-2.2 - Water quality. Physical, chemical and biochemical methods. Determination of iron: 1,10-phenanthroline photometric method
• BS-6068-2-2.12 - Water quality. Physical, chemical and biochemical methods. Determination of phenol index: 4-aminoantipyrine (4-aminophenazone) spectrometric methods after distillation
• BS-6068-2.39 - Water quality. Physical, chemical and biochemical methods
• BS-6068-2.41 - Water quality. Physical, chemical and biochemical methods
• BS-6068-2.45 - Water quality. Physical, chemical and biochemical methods. Determination of selenium by atomic absorption spectrometry
• BS-6068-2.47 - Water quality. Physical, chemical and biochemical methods
• BS-6068-2.50 - Water quality. Physical, chemical and biochemical methods. Determination of pH
• BS-6068-2.69 - Water quality. Physical, chemical and biochemical methods. Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents
• BS-6068-2.7 - Water quality. Physical, chemical and biochemical methods
• BS-6068-2.70 - Determination of Selected Phenoxyalkanoic Herbicides, Including Bentazones & Hydroxybe
• BS-6068-2.8 - Water quality. Physical, chemical and biochemical methods. Determination of calcium content: EDTA titrimetric method
• BS-6068-2.9 - Water quality. Physical, chemical and biochemical methods. Determination of the sum of calcium and magnesium: EDTA titrimetric method
• BS-6068-5.6 - Water quality. Biological methods. Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds: method by analysis of dissolved organic carbon (DOC)
• BS-6920-4 - Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method for the GCMS identification of water leachable organic substances
• BS-EN-12260 - Water quality. Determination of nitrogen. Determination of bound nitrogen (TN_b), following oxidation to nitrogen oxides
• BS-EN-1233 - Water quality. Determination of chromium. Atomic absorption spectrometric methods
• BS-EN-12338 - Water quality. Determination of mercury. Enrichment methods by amalgamation
• BS-EN-12673 - Water quality. Gas chromatographic determination of some selected chlorophenols in water
• BS-EN-12918 - Water quality. Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
• BS-EN-13506 - Water quality. Determination of mercury by atomic fluorescence spectrometry
• BS-EN-13577 - Chemical attack on concrete. Determination of aggressive carbon dioxide content in water
• BS-EN-14207 - Water quality. Determination of epichlorohydrin
• BS-EN-1484 - Water analysis. Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
• BS-EN-1485 - Water Quality, Determination of Adsorbable Organically Boundhalogen (Aox)
• BS-EN-16691 - Water quality. Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• BS-EN-16693 - Water quality. Determination of organochlorine pesticides (OCP) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• BS-EN-16694 - Water quality. Determination of selected polybrominated diphenly ether (PBDE) in whole water samples. Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
• BS-EN-25663 - Water quality. Determination of Kjeldahl nitrogen. Method after mineralization with selenium
• BS-EN-25814 - Method for determination of dissolved oxygen in water: electrochemical probe method
• BS-EN-ISO-10304-1 - Water quality. Determination of dissolved anions by liquid chromatography of ions
• BS-EN-ISO-10304-3 - Water quality. Determination of dissolved anions by liquid chromatography of ions
• BS-EN-ISO-10304-4 - Water quality. Determination of dissolved anions by liquid chromatography of ions
• BS-EN-ISO-10304-4-TC - Tracked Changes. Water quality. Determination of dissolved anions by liquid chromatography of ions
• BS-EN-ISO-10523 - Water quality. Determination of pH
• BS-EN-ISO-10695 - Water quality. Determination of selected organic nitrogen and phosphorus compounds. Gas chromatographic methods
• BS-EN-ISO-11206 - Water quality. Determination of dissolved bromate. Method using ion chromatography (IC) and post column reaction (PCR)
• BS-EN-ISO-11369 - Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
• BS-EN-ISO-11885 - Water quality. Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
• BS-EN-ISO-11969 - Water quality. Determination of arsenic. Atomic absorption spectrometric method (hydride technique)
• BS-EN-ISO-12010 - Water quality. Determination of short-chain polychlorinated alkanes (SCCP) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
• BS-EN-ISO-12020 - Water quality. Determination of aluminium. Atomic absorption spectrometric methods
• BS-EN-ISO-12846 - Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment
• BS-EN-ISO-14402 - Water quality. Determination of phenol index by flow analysis (FIA and CFA)
• BS-EN-ISO-14403 - Water quality. Determination of total cyanide and free cyanide by continuous flow analysis
• BS-EN-ISO-14403-1 - Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)
• BS-EN-ISO-14403-2 - Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)
• BS-EN-ISO-14911 - Water quality. Determination of dissolved Li$u+, Na₄$u+, NH₄$u+, K$u+, Mn²$u+, Ca²$u+, Mg²$u+, Sr²$u+ and Ba²$u+ using ion chromatography. Method for water and waste water
• BS-EN-ISO-15587-1 - Water quality. Digestion for the determination of selected elements in water
• BS-EN-ISO-15587-2 - Water quality. Digestion for the determination of selected elements in water
• BS-EN-ISO-15681-1 - Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA)
• BS-EN-ISO-15681-2 - Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA)
• BS-EN-ISO-15682 - Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
• BS-EN-ISO-15913 - Water quality. Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
• BS-EN-ISO-16264 - Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
• BS-EN-ISO-16265 - Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
• BS-EN-ISO-16588 - Water quality. Determination of six complexing agents. Gas-chromatographic method
• BS-EN-ISO-17294-1 - Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)
• BS-EN-ISO-17294-2 - Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)
• BS-EN-ISO-17294-2-TC - Tracked Changes. Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)
• BS-EN-ISO-17353 - Water quality. Determination of selected organotin compounds. Gas chromatographic method
• BS-EN-ISO-17495 - Water quality. Determination of selected nitrophenols. Method by solid-phase extraction and gas chromatography with mass spectrometric detection
• BS-EN-ISO-17852 - Water quality. Determination of mercury. Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
• BS-EN-ISO-17943 - Water quality. Determination of volatile organic compounds in water. Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
• BS-EN-ISO-17993 - Water quality. Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
• BS-EN-ISO-18412 - Water quality. Determination of chromium (VI). Photometric method for weakly contaminated water
• BS-EN-ISO-18635 - Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter. Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
• BS-EN-ISO-18856 - Water quality. Determination of selected phthalates using gas chromatography/mass spectrometry
• BS-EN-ISO-18857-1 - Water quality. Determination of selected alkylphenols. Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
• BS-EN-ISO-18857-2 - Water quality. Determination of selected alkylphenols
• BS-EN-ISO-19340 - Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
• BS-EN-ISO-20236 - Water quality. Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TN_b) and dissolved bound nitrogen (DN_b) after high temperature catalytic oxidative combustion
• BS-EN-ISO-20595 - Water quality. Determination of selected highly volatile organic compounds in water. Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)
• BS-EN-ISO-20596-2 - Water quality. Determination of cyclic volatile methylsiloxanes in water
• BS-EN-ISO-21253-1 - Water quality. Multi-compound class methods
• BS-EN-ISO-21253-2 - Water quality. Multi-compound class methods
• BS-EN-ISO-22032 - Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
• BS-EN-ISO-22478 - Water quality. Determination of certain explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with UV detection
• BS-EN-ISO-23913 - Water quality. Determination of Chromium(VI). Method using flow analysis (FIA and CFA) and spectrometric detection
• BS-EN-ISO-27108 - Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
• BS-EN-ISO-5814 - Water quality. Determination of dissolved oxygen. Electrochemical probe method
• BS-EN-ISO-5815-1 - Water quality. Determination of biochemical oxygen demand after n days (BODn)
• BS-EN-ISO-5961 - Water quality. Determination of cadmium by atomic absorption spectrometry
• BS-EN-ISO-7393-1 - Water quality. Determination of free chlorine and total chlorine. Titrimetric method using N,N-diethyl-1,4-phenylenediamine
• BS-EN-ISO-7393-2 - Water quality. Determination of free chlorine and total chlorine
• BS-EN-ISO-7393-3 - Water quality. Determination of free chlorine and total chlorine
• BS-EN-ISO-7980 - Water quality. Determination of calcium and magnesium. Atomic absorption spectrometric method
• BS-EN-ISO-8467 - Water quality. Determination of permanganate index
• BS-EN-ISO-9377-2 - Water quality. Determination of hydrocarbon oil index
• BS-EN-ISO-9562 - Water quality. Determination of adsorbable organically bound halogens (AOX)
• BS-ISO-10260 - Water quality. Measurement of biochemical parameters. Spectrometric determination of the chlorophyll-a concentration
• BS-ISO-10523 - Water Quality, Determination of Ph
• BS-ISO-11349 - Water quality. Determination of low-volatility lipophilic substances. Gravimetric method
• BS-ISO-12010 - Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
• BS-ISO-15681-2 - Water Quality, Determination of Orthophosphate & Total Phosphorus Contents by Flow Ana
• BS-ISO-15705 - Water quality. Determination of the chemical oxygen demand index (ST-COD). Small-scale sealed-tube method
• BS-ISO-15923-1 - Water quality. Determination of selected parameters by discrete analysis systems
• BS-ISO-16264 - Water Quality - Determination of Soluble Silicates by Flow Analysis (FIA & CFA) & Phot
• BS-ISO-16265 - Water Quality, Determination of the Methylene Blue Active Substances (Mbas) Index, Met
• BS-ISO-16308 - Water quality. Determination of glyphosate and AMPA. Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
• BS-ISO-16588 - Water Quality, Determination of Six Complexing Agents, Gas-Chromatographic Method
• BS-ISO-17289 - Water quality. Determination of dissolved oxygen. Optical sensor method
• BS-ISO17294-1 - Water Quality, Application of Inductively Coupled Plasma Mass Spectrometry (ICP-Ms), G
• BS-ISO-17378-2 - Water quality. Determination of arsenic and antimony
• BS-ISO-17690 - Water quality. Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection
• BS-ISO-17852 - Water Quality, Determination of Mercury, Method Using a Combined Preservation & Digest
• BS-ISO-17858 - Water quality. Determination of dioxin-like polychlorinated Biphenyls. Method using gas-chromatography/mass spectrometry
• BS-ISO-17993 - Water Quality, Determination of 15 Polycyclic Aromatic Hydrocarbons (Pah) in Water By
• BS-ISO-18191 - Water quality. Determination of pH_t in sea water. Method using the indicator dye m-cresol purple
• BS-ISO-18857-2 - Water Quality, Determination of Selected Alkylphenols, Gas Chromatographic-Mass Spectr
• BS-ISO-20236 - Water quality. Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TN_b) and dissolved bound nitrogen (DN_b) after high temperature catalytic oxidative combustion
• BS-ISO-20595 - Water quality. Determination of selected highly volatile organic compounds in water. Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)
• BS-ISO-20596-1 - Water quality. Determination of cyclic volatile methylsiloxanes in water
• BS-ISO-20596-2 - Water quality. Determination of cyclic volatile methylsiloxanes in water
• BS-ISO-20950-1 - Water quality. Determination of available weak and dissociable (WAD) cyanide
• BS-ISO-21675 - Water quality. Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water. Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS)
• BS-ISO-21676 - Water quality. Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water. Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection
• BS-ISO-21863 - Water quality. Determination of alkylmercury compounds in water. Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction
• BS-ISO-22032 - Water Quality, Determination of Selected Polybrominated Diphenyl Ethers in Sediment &
• BS-ISO-22066 - Water quality. Determination of total cyanide. Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
• BS-ISO-22104 - Water quality. Determination of microcystins. Method using liquid chromatography and tandem mass spectrometry (LC-MS/MS)
• BS-ISO-23256-TC - Water quality. Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls. Method using a flow immunosensor technique
• BS-ISO-23695 - Water quality. Determination of ammonium nitrogen in water. Small-scale sealed tube method
• BS-ISO-23696-1 - Water quality. Determination of nitrate in water using small-scale sealed tubes
• BS-ISO-23696-2 - Water quality. Determination of nitrate in water using small-scale sealed tubes
• BS-ISO-23697-1 - Water quality. Determination of total bound nitrogen (ST-TNb) in water using small-scale sealed tubes
• BS-ISO-23697-2 - Water quality. Determination of total bound nitrogen (ST-TNb) in water using small-scale sealed tubes
• BS-ISO-24293 - Water quality. Determination of individual isomers of nonylphenol. Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
• BS-ISO-24384 - Water quality. Determination of chromium(VI) and chromium(III) in water. Method using liquid chromatography with inductively coupled plasma mass spectrometry (LC-ICP-MS) after chelating pretreatment
• BS-ISO-25101 - Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA). Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
• BS-ISO-27108 - Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
• BS-ISO-28540 - Water quality. Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water. Method using gas chromatography with mass spectrometric detection (GC-MS)
• BS-ISO-7981-1 - Water quality. Determination of polycyclic aromatic hydrocarbons (PAH)
• BS-ISO-7981-2 - Water quality. Determination of polycyclic aromatic hydrocarbons (PAH)
• DD-ENV-12260 - Water Quality, Determination of Nitrogen, Determination of Bound Nitrogen, After Combu
• PD-CEN-16692 - Water quality. Determination of tributyltin (TBT) in whole water samples. Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry
• PD-CEN-16800 - Guideline for the validation of physico-chemical analytical methods
• PD-CEN-17614 - Standard method for assessing and improving the energy efficiency of waste water treatment plants
• PD-ISO-15923-2 - Water quality. Determination of selected parameters by discrete analysis systems
• PD-ISO-16780 - Water quality. Determination of polychlorinated naphthalenes (PCN). Method using gas chromatography (GC) and mass spectrometry (MS)
• PD-ISO-17379-1 - Water quality. Determination of selenium
• PD-ISO-17379-2 - Water quality. Determination of selenium
• PD-ISO-17951-1 - Water quality. Determination of fluoride using flow analysis (FIA and CFA)
• PD-ISO-17951-2 - Water quality. Determination of fluoride using flow analysis (FIA and CFA)
• PD-ISO-19620 - Water quality. Determination of arsenic(III) and arsenic(V) species. Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS)
• PD-ISO-21231 - Water quality. Characterization of analytical methods. Guidelines for the selection of a representative matrix
• PD-ISO-28581 - Water quality. Determination of selected non-polar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)

ISO:

• ISO-10260 - Water quality - Measurement of biochemical parameters - Spectrometric determination of the chlorophyll-a concentration
• ISO-10301 - Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods
• ISO-10304-1 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
• ISO-10304-2 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
• ISO-10304-3 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
• ISO-10304-4 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
• ISO-10359-1 - Water quality - Determination of fluoride - Part 1: Electrochemical probe method for potable and lightly polluted water
• ISO-10359-2 - Water quality - Determination of fluoride - Part 2: Determination of inorganically bound total fluoride after digestion and distillation
• ISO-10523 - Water quality - Determination of pH
• ISO-10530 - Water quality - Determination of dissolved sulfide - Photometric method using methylene blue
• ISO-10566 - Water quality - Determination of aluminium - Spectrometric method using pyrocatechol violet
• ISO-10695 - Water quality -- Determination of selected organic nitrogen and phosphorus compounds -- Gas chromatographic methods
• ISO-11083 - Water quality - Determination of chromium(VI) - Spectrometric method using 1,5-diphenylcarbazide
• ISO-11206 - Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
• ISO-11349 - Water quality - Determination of low-volatility lipophilic substances - Gravimetric method
• ISO-11369 - Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
• ISO-11370 - Water quality -- Determination of selected organic plant-treatment agents -- Automated multiple development (AMD) technique
• ISO-11423-1 - Water quality - Determination of benzene and some derivatives - Part 1: Head-space gas chromatographic method
• ISO-11423-2 - Water quality - Determination of benzene and some derivatives - Part 2: Method using extraction and gas chromatography
• ISO-11732 - Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
• ISO-11885 - Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
• ISO-11905-1 - Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate
• ISO-11969 - Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)
• ISO-12010 - Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
• ISO-12020 - Water quality - Determination of aluminium - Atomic absorption spectrometric methods
• ISO-12846 - Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
• ISO-13358 - Water quality - Determination of easily released sulfide
• ISO-13395 - Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
• ISO-14402 - Water quality - Determination of phenol index by flow analysis (FIA and CFA)
• ISO-14403 - Water quality - Determination of total cyanide and free cyanide by continuous flow analysis
• ISO-14403-1 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)
• ISO-14403-2 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
• ISO-14911 - Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
• ISO-15061 - Water quality -- Determination of dissolved bromate -- Method by liquid chromatography of ions
• ISO-15089 - Water quality - Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents
• ISO-15586 - Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace
• ISO-15587-1 - Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion
• ISO-15587-2 - Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion
• ISO-15680 - Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
• ISO-15681-1 - Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 1: Method by flow injection analysis (FIA)
• ISO-15681-2 - Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA)
• ISO-15682 - Water quality -- Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
• ISO-15705 - Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
• ISO-15913 - Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
• ISO-15923-1 - Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection
• ISO-15923-2 - Water quality - Determination of selected parameters by discrete analysis systems - Part 2: Chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric detection
• ISO-16137 - Industrial valves - Check valves of thermoplastics materials
• ISO-16264 - Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
• ISO-16265 - Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA)
• ISO-16308 - Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
• ISO-16588 - Water quality - Determination of six complexing agents - Gas-chromatographic method
• ISO-16588-1 - Water quality - Determination of six complexing agents - Gas-chromatographic method - Amendment 1
• ISO-16590 - Water quality -- Determination of mercury -- Methods involving enrichment by amalgamation
• ISO-16780 - Water quality - Determination of polychlorinated naphthalenes (PCN) - Method using gas chromatography (GC) and mass spectrometry (MS)
• ISO-17289 - Water quality - Determination of dissolved oxygen - Optical sensor method
• ISO-17294-1 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements
• ISO-17294-2 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
• ISO-17353 - Water quality - Determination of selected organotin compounds - Gas chromatographic method
• ISO-17378-1 - Water quality - Determination of arsenic and antimony - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
• ISO-17378-2 - Water quality - Determination of arsenic and antimony - Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
• ISO-17379-1 - Water quality - Determination of selenium - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
• ISO-17379-2 - Water quality - Determination of selenium - Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
• ISO-17495 - Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection
• ISO-17690 - Water quality - Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection
• ISO-17852 - Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
• ISO-17858 - Water quality - Determination of dioxin-like polychlorinated biphenyls - Method using gas chromatography/mass spectrometry
• ISO-17943 - Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
• ISO-17951-1 - Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
• ISO-17951-2 - Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation
• ISO-17993 - Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
• ISO-18073 - Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS
• ISO-18191 - Water quality - Determination of pHt in sea water - Method using the indicator dye m-cresol purple
• ISO-18412 - Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water
• ISO-18635 - Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
• ISO-18856 - Water quality - Determination of selected phthalates using gas chromatography/mass spectrometry
• ISO-18857-1 - Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
• ISO-18857-2 - Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation
• ISO-19340 - Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC)
• ISO-19620 - Water quality - Determination of arsenic(III) and arsenic(V) species - Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS)
• ISO-20179 - Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
• ISO-20236 - Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
• ISO-20595 - Water quality - Determination of selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)
• ISO-20596-1 - Water quality - Determination of cyclic volatile methylsiloxanes in water - Part 1: Method using purge and trap with gas chromatography-mass spectrometry (GC-MS)
• ISO-20596-2 - Water quality - Determination of cyclic volatile methylsiloxanes in water - Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS)
• ISO-20950-1 - Water quality - Determination of available weak and dissociable (WAD) cyanide - Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection
• ISO-21231 - Water quality - Characterization of analytical methods - Guidelines for the selection of a representative matrix
• ISO-21253-1 - Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry
• ISO-21253-2 - Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
• ISO-21458 - Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography (HPLC) and fluorometric detection
• ISO-21675 - Water quality - Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water - Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS)
• ISO-21676 - Water quality - Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection
• ISO-21793 - Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb), dissolved bound nitrogen (DNb), total bound phosphorus (TPb) and dissolved bound phosphorus (DPb) after wet chemical catalysed ozone hydroxyl radical oxidation (COHR)
• ISO-21863 - Water quality - Determination of alkylmercury compounds in water - Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction
• ISO-22032 - Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry
• ISO-22066 - Water quality - Determination of total cyanide - Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
• ISO-22104 - Water quality - Determination of microcystins - Method using liquid chromatography and tandem mass spectrometry (LC-MS/MS)
• ISO-22478 - Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection
• ISO-22719 - Water quality - Determination of total alkalinity in sea water using high precision potentiometric titration
• ISO-22743 - Water quality - Determination of sulfates - Method by continuous flow analysis (CFA)
• ISO-23256 - Water quality - Detection of selected congeners of polychlorinated dibenzo-p-dioxins and polychlorinated biphenyls - Method using a flow immunosensor technique
• ISO-23631 - Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization
• ISO-23695 - Water quality - Determination of ammonium nitrogen in water - Small-scale sealed tube method
• ISO-23696-1 - Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 1: Dimethylphenol colour reaction
• ISO-23696-2 - Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 2: Chromotropic acid colour reaction
• ISO-23697-1 - Water quality - Determination of total bound nitrogen (ST-TNb) in water using small-scale sealed tubes - Part 1: Dimethylphenol colour reaction
• ISO-23697-2 - Water quality - Determination of total bound nitrogen (ST-TNb) in water using small-scale sealed tubes - Part 2: Chromotropic acid colour reaction
• ISO-23913 - Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
• ISO-24293 - Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
• ISO-24384 - Water quality - Determination of chromium(VI) and chromium(III) in water - Method using liquid chromatography with inductively coupled plasma mass spectrometry (LC-ICP-MS) after chelating pretreatment
• ISO-25101 - Water quality - Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
• ISO-27108 - Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
• ISO-28540 - Water quality - Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water - Method using gas chromatography with mass spectrometric detection (GC-MS)
• ISO-28581 - Water quality - Determination of selected non-polar substances - Method using gas chromatography with mass spectrometric detection (GC-MS)
• ISO-29441 - Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
• ISO-5663 - Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium
• ISO-5664 - Water quality - Determination of ammonium - Distillation and titration method
• ISO-5666 - Water quality -- Determination of mercury
• ISO-5813 - Water quality - Determination of dissolved oxygen - Iodometric method
• ISO-5814 - Water quality - Determination of dissolved oxygen - Electrochemical probe method
• ISO-5815-1 - Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition
• ISO-5815-2 - Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
• ISO-5961 - Water quality - Determination of cadmium by atomic absorption spectrometry
• ISO-6058 - Water quality - Determination of calcium content - EDTA titrimetric method
• ISO-6059 - Water quality - Determination of the sum of calcium and magnesium - EDTA titrimetric method
• ISO-6060 - Water quality - Determination of the chemical oxygen demand
• ISO-6332 - Water quality - Determination of iron - Spectrometric method using 1,10-phenanthroline
• ISO-6333 - Water quality - Determination of manganese - Formaldoxime spectrometric method
• ISO-6439 - Water quality - Determination of phenol index - 4-Aminoantipyrine spectrometric methods after distillation
• ISO-6468 - Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction
• ISO-6703-1 - Water quality - Determination of cyanide - Part 1 : Determination of total cyanide
• ISO-6703-2 - Water quality - Determination of cyanide - Part 2 : Determination of easily liberatable cyanide
• ISO-6703-3 - Water quality - Determination of cyanide - Part 3 : Determination of cyanogen chloride
• ISO-6777 - Water quality - Determination of nitrite - Molecular absorption spectrometric method
• ISO-6778 - Water quality - Determination of ammonium - Potentiometric method
• ISO-6878 - Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
• ISO-7150-1 - Water quality - Determination of ammonium - Part 1 : Manual spectrometric method
• ISO-7150-2 - Water quality - Determination of ammonium - Part 2 : Automated spectrometric method
• ISO-7393-1 - Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine
• ISO-7393-2 - Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes
• ISO-7393-3 - Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine
• ISO-7875-1 - Water quality - Determination of surfactants - Part 1 : Determination of anionic surfactants by measurement of the methylene blue index (MBAS)
• ISO-7875-2 - Water quality - Determination of surfactants - Part 2 : Determination of non-ionic surfactants using Dragendorff reagent
• ISO-7890-1 - Water quality - Determination of nitrate - Part 1 : 2,6-Dimethylphenol spectrometric method
• ISO-7890-2 - Water quality - Determination of nitrate - Part 2 : 4-Fluorophenol spectrometric method after distillation
• ISO-7890-3 - Water quality - Determination of nitrate - Part 3 : Spectrometric method using sulfosalicylic acid
• ISO-7980 - Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
• ISO-7981-1 - Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 1: Determination of six PAH by high-performance thin-layer chromatography with fluorescence detection after liquid-liquid extraction
• ISO-7981-2 - Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 2: Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction
• ISO-8165-1 - Water quality - Determination of selected monovalent phenols - Part 1: Gas chromatographic method after enrichment by extraction
• ISO-8165-2 - Water quality -- Determination of selected monovalent phenols -- Part 2: Method by derivatization and gas chromatography
• ISO-8245 - Water quality -- Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
• ISO-8288 - Water quality - Determination of cobalt, nickel, copper, zinc, cadmium and lead - Flame atomic absorption spectrometric methods
• ISO-8467 - Water quality - Determination of permanganate index
• ISO-9174 - Water quality - Determination of chromium - Atomic absorption spectrometric methods
• ISO-9297 - Water quality - Determination of chloride - Silver nitrate titration with chromate indicator (Mohrs method)'
• ISO-9377-2 - Water quality -- Determination of hydrocarbon oil index -- Part 2: Method using solvent extraction and gas chromatography
• ISO-9390 - Water quality - Determination of borate - Spectrometric method using azomethine-H
• ISO-9562 - Water quality - Determination of adsorbable organically bound halogens (AOX)
• ISO-9963-1 - Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity
• ISO-9963-2 - Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity
• ISO-9964-1 - Water quality - Determination of sodium and potassium - Part 1: Determination of sodium by atomic absorption spectrometry
• ISO-9964-2 - Water quality - Determination of sodium and potassium - Part 2: Determination of potassium by atomic absorption spectrometry
• ISO-9964-3 - Water quality - Determination of sodium and potassium - Part 3: Determination of sodium and potassium by flame emission spectrometry
• ISO-9965 - Water quality - Determination of selenium - Atomic absorption spectrometric method (hydride technique)
• ISO/DIS-20179 - Water Quality - Determination of Microcystins - Method Usingsolid Phase Extraction (SPE)

Other SDOs:

• DIN-38402-45 - German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
• DIN-38407-21 - Part 21: Determination of Selected Explosives & Related Compounds by High Performance
• DIN-38407-25 - Part 25: Determination of Dalapon, Trichloroacetic Acid & Selected Haloacetic Acids By
• DIN-38409-7 - Part 7: Determination of Acid & Base-Neutralizing Capacities (H 7), German Standard Me
• DIN-EN-ISO-11732 - Water Quality, Determination of Ammonium Nitrogen - Method by Flow Analysis (CFA & FIA
• DIN-EN-ISO-14403 - Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002)
• DIN-EN-ISO-15681-1 - Part 1: Method by Flow Injection Analysis (FIA), Water Quality, Determination of Ortho
• DIN-EN-ISO-15681-2 - Part 2: Method by Continuous Flow Analysis (CFA), Water Quality, Determination of Orth
• DIN-EN-ISO-15913 - Water Quality - Determination of Selected Phenoxyalkanoic Herbicides, Including Bentaz
• DIN-EN-ISO-16264 - Water Quality, Determination of Soluble Silicates by Flow Analysis (FIA & CFA) & Photo
• DIN-EN-ISO-17294-1 - Part 1: General Guidelines, Water Quality - Application of Inductively Coupled Plasma
• DIN-EN-ISO-17294-2 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
• DIN-EN-ISO-17353 - Water Quality - Determination of Selected Organotin Compounds - Gas Chromatographic Me
• DIN-EN-ISO-17993 - Water Quality, Determination of 15 Polycyclic Aromatic Hydrocarbons (Pah) in Water By
• DIN-EN-ISO-18412 - Water Quality - Determination of Chromium(VI) - Photometric Method for Weakly Contami
• DIN-EN-ISO-18856 - Water Quality - Determination of Selected Phthalates Using Gas Chromatography/Mass SPE
• DIN-EN-ISO-18857-1 - Part 1: Method for Non-Filtered Samples Using Liquid-Liquid Extraction & Gas Chromato
• DIN-EN-ISO-23631 - Water Quality - Determination of Dalapon, Trichloroacetic Acid & Selected Haloacetic A
• DIN-EN-ISO-5667-3 - Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012)
• DIN-EN-ISO-6878 - Water Quality, Determination of Phosphorus - Ammonium Molybdate Spectrometric Method
• DIN-EN-ISO-8192 - Water Quality - Test for Inhibition of Oxygen Consumption by Activated Sludge for CARB
• DIN-EN-ISO-9509 - Water Quality - Toxicity Test for Assessing the Inhibition of Nitrification of Activat
• DIN-EN-ISO-9562 - Water Quality, Determination of Adsorbable Organically Bound Halogens (Aox)
• EN-1233 - Water Quality, Method for the Determination of Electrical Co Spectrometric Methods
• EN-12338 - Water Quality - Determination of Mercury - Enrichment Methods by Amalgamation
• EN-13506 - Water Quality - Determination of Mercury by Atomic Fluorescence Spectrometry
• EN-13577 - Chemical Attack on Concrete, Determination of Aggressive Carbon Dioxide Content in Wat
• EN-16691 - Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• EN-16693 - Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• EN-16694 - Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
• EN-ISO-10304-1 - Part 1: Determination of Bromide, Chloride, Fluoride, Nitrate, Nitrite, Phosphate & Su
• EN-ISO-10523 - Water quality - Determination of pH
• EN-ISO-10695 - Water Quality - Determination of Selected Organic Nitrogen & Phosphorus Compounds, Gas
• EN-ISO-11206 - Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011)
• EN-ISO-11369 - Water Quality, Determination of Selected Plant Treatment Agents, Method Using High Per
• EN-ISO-11885 - Water Quality - Determination of Selected Elements by Inductively Coupled Plasma Optic
• EN-ISO-12010 - Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2012)
• EN-ISO-12846 - Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
• EN-ISO-14403 - Water Quality, Determination of Total Cyanide & Free Cyanide by Continuous Flow Analys
• EN-ISO-14403-1 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012)
• EN-ISO-14403-2 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012)
• EN-ISO-15587-1 - Part 1: Aqua Regia Digestion, Water Quality, Digestion for the Determination of Select
• EN-ISO-15681-1 - Part 1: Method by Flow Injection Analysis (FIA), Water Quality, Determination of Ortho
• EN-ISO-15681-2 - Part 2: Method by Continuous Flow Analysis (CFA), Water Quality, Determination of Orth
• EN-ISO-15682 - Water Quality, Determination of Chloride by Flow Analysis (CFA & FIA) & Photometric Or
• EN-ISO-16265 - Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA)
• EN-ISO-16588 - Water Quality - Determination of Six Complexing Agents, Gas-Chromatographic Method
• EN-ISO-17294-1 - Part 1: General Guidelines, Water Quality - Applicaiton of Inductively Coupled Plasma
• EN-ISO-17294-2 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
• EN-ISO-17353 - Water Quality - Determination of Selected Organotin Compounds - Gas Chromatographic Me
• EN-ISO-17495 - Water Quality, Determination of Selected Nitrophenols - Method by Solid-Phase Extracti
• EN-ISO-17852 - Water Quality, Determination of Mercury, Method Using a Combined Preservation & Digest
• EN-ISO-17943 - Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
• EN-ISO-18412 - Water Quality - Determination of Chromium(VI) - Photometric Method for Weakly Contami
• EN-ISO-18635 - Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
• EN-ISO-18856 - Water Quality - Determination of Selected Phthalates Using Gas Chromatography/Mass SPE
• EN-ISO-18857-1 - Part 1: Method for Non-Filtered Samples Using Liquid-Liquid Extraction & Gas Chromato
• EN-ISO-18857-2 - Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation
• EN-ISO-19340 - Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
• EN-ISO-22032 - Water Quality - Determination of Selected Polybrominated Diphenyl Ethers in Sediment &
• EN-ISO-22478 - Water Quality - Determination of Certain Explosives & Related Compounds - Method Using
• EN-ISO-23631 - Water Quality - Determination of Dalapon, Trichloroacetic Acid & Selected Haloacetic A
• EN-ISO-23913 - Water Quality - Determination of Chromium(VI) - Method Using Flow Analysis (FIA & CFA)
• EN-ISO-27108 - Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010)
• EN-ISO-5814 - Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012)
• EN-ISO-6878 - Water Quality, Determination of Phosphorus - Ammonium Molybdate Spectrometric Method
• EN-ISO-8467 - Water Quality, Determination of Permanganate Index
• EN-ISO-9562 - Water Quality, Determination of Adsorbable Organically Bound Halogens (Aox)
• JIS-K-0093 - Testing methods for polychlorobiphenyl in industrial water and wastewater
• JIS-K-0128 - Testing methods for pesticides in industrial water and waste water
• JIS-K-0450-10-10 - Testing method for bisphenol A in industrial water and waste water
• JIS-K-0450-40-10 - Testing method for hexanedioic acid bis(2-ethylhexyl) ester in industrial water and wastewater
• JIS-K-0450-50-10 - Testing method for benzophenone in industrial water and wastewater
• JIS-S-3200-7-A2 - Equipment for water supply service -- Test methods of effect to water quality (Amendment 2)
• SIS-CEN/TS-16692 - Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry
• SIS-CEN/TS-16800 - Guideline for the validation of physico-chemical analytical methods
• SIS-ISO/TS-13530 - Water quality - Guidance on analytical quality control for chemical and physicochemical water analysis (ISO/TS 13530:2009, IDT)
• SS-EN-12260 - Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
• SS-EN-1233 - Water quality - Determination of chromium - Atomic absorption spectrometric method
• SS-EN-12338 - Water quality - Determination of mercury - Enrichment methods by amalgamation
• SS-EN-12673 - Water quality - Gas chromatographic determination of some selected chlorophenols in water
• SS-EN-12918 - Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
• SS-EN-13506 - Water quality - Determination of mercury by atomic fluorescense spectrometry
• SS-EN-13577 - Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
• SS-EN-14207 - Water quality - Determination of epichlorohydrin
• SS-EN-1483 - Water quality - Determination of mercury - Method using atomic absorption spectrometry
• SS-EN-16691 - Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• SS-EN-16693 - Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• SS-EN-16694 - Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
• SS-EN-1899-1 - Water quality - Determination of biochemical oxygen demand after n days (BOD") - Part 1: Dilution and seeding method with allythiourea addition (ISO 5815:1989, modified)
• SS-EN-1899-2 - Water quality - Determination of biochemical oxygen demand after n days (BOD") - Part 2: Method for undiluted samples (ISO 5815:1989, modified)
• SS-EN-25813 - Water quality - Determination of dissolved oxygen- Iodometric method
• SS-EN-25814 - Water quality - Determination of dissolved oxygen- Electrochemical probe method
• SS-EN-903 - Water quality - Determination of anionic surfactants by measurement of the metylene blue index MBAS(ISO 7875-1:1984 modified)
• SS-EN-ISO-10301 - Water quality - Determination of highly volatile halogeneated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997)
• SS-EN-ISO-10304-1 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
• SS-EN-ISO-10304-3 - Water quality - Determination of dissolved anionsby liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997)
• SS-EN-ISO-10304-4 - Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
• SS-EN-ISO-10523 - Water quality - Determination of pH (ISO 10523:2008)
• SS-EN-ISO-10695 - Water quality - Determination of selected organic nitrogen and phosphorus compounds - Gas chromatographic methods (ISO 10695:2000)
• SS-EN-ISO-11206 - Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011)
• SS-EN-ISO-11369 - Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
• SS-EN-ISO-11732 - Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
• SS-EN-ISO-11885 - Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
• SS-EN-ISO-11905-1 - Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997)
• SS-EN-ISO-11969 - Water quality - Determination of arsenic - Atomicabsorption spectrometric method (hydride technique) (ISO 11969:1996)
• SS-EN-ISO-12010 - Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019)
• SS-EN-ISO-12020 - Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997)
• SS-EN-ISO-12846 - Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)
• SS-EN-ISO-13395 - Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996)
• SS-EN-ISO-14402 - Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999)
• SS-EN-ISO-14403 - Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002)
• SS-EN-ISO-14403-1 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012)
• SS-EN-ISO-14403-2 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012)
• SS-EN-ISO-14911 - Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998)
• SS-EN-ISO-15061 - Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001)
• SS-EN-ISO-15586 - Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003)
• SS-EN-ISO-15587-1 - Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002)
• SS-EN-ISO-15587-2 - Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002)
• SS-EN-ISO-15680 - Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
• SS-EN-ISO-15681-1 - Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 1: Method by flow injection analysis (FIA) (ISO 15681-1:2003)
• SS-EN-ISO-15681-2 - Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2018)
• SS-EN-ISO-15682 - Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000)
• SS-EN-ISO-15913 - Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000)
• SS-EN-ISO-16264 - Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002)
• SS-EN-ISO-16265 - Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009)
• SS-EN-ISO-16588 - Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002)
• SS-EN-ISO-16588-AM1 - Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002/Amd 1:2004)
• SS-EN-ISO-17294-1 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004)
• SS-EN-ISO-17294-2 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2023)
• SS-EN-ISO-17353 - Water quality - Determination of selected organotin compounds - Gas chromatographic method (ISO 17353:2004)
• SS-EN-ISO-17495 - Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001)
• SS-EN-ISO-17852 - Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006)
• SS-EN-ISO-17943 - Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016)
• SS-EN-ISO-17993 - Water quality - Determination of 15 polycyclic aromatic hydracarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction (ISO 17993:2002)
• SS-EN-ISO-18412 - Water quality - Determination of chromium (VI) - Photometric method for weakly contaminated water (ISO 18412:2005)
• SS-EN-ISO-18635 - Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI) (ISO 18635:2016)
• SS-EN-ISO-18856 - Water quality - Determination of selected phthalates using gas chromatography/mass spectrometry (ISO 18856:2004)
• SS-EN-ISO-18857-1 - Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)
• SS-EN-ISO-18857-2 - Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation (ISO 18857-2:2009)
• SS-EN-ISO-19340 - Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
• SS-EN-ISO-20236 - Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2018)
• SS-EN-ISO-20595 - Water quality - Determination of selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) (ISO 20595:2018)
• SS-EN-ISO-20596-2 - Water quality - Determination of cyclic volatile methylsiloxanes in water - Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS) (ISO 20596-2:2021)
• SS-EN-ISO-21253-1 - Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO 21253-1:2019)
• SS-EN-ISO-21253-2 - Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
• SS-EN-ISO-21676 - Water quality - Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection (ISO 21676:2018)
• SS-EN-ISO-22032 - Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006)
• SS-EN-ISO-22478 - Water quality - Determination of certain explosives and related compounds - Method using high performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
• SS-EN-ISO-23631 - Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)
• SS-EN-ISO-23913 - Water quality - Determination of chromium (VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006)
• SS-EN-ISO-27108 - Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010)
• SS-EN-ISO-5667-3 - Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018)
• SS-EN-ISO-5667-6 - Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014)
• SS-EN-ISO-5667-6-AM1 - Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014)
• SS-EN-ISO-5814 - Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012)
• SS-EN-ISO-5815-1 - Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815-1:2019)
• SS-EN-ISO-5961 - Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994)
• SS-EN-ISO-6468 - Water quaility - Determination of certain organochlorine insecticides, polychlorinated biphenyls and clorobenzenes - Gas chromatographic method afterliquid-liquid extraction (ISO 6468:1996)
• SS-EN-ISO-6878 - Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004)
• SS-EN-ISO-7393-1 - Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamíne (ISO 7393-1:1985)
• SS-EN-ISO-7393-2 - Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)
• SS-EN-ISO-7393-3 - Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990)
• SS-EN-ISO-7980 - Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986)
• SS-EN-ISO-8467 - Water quality - Determination of permanganate index (ISO 8467:1993)
• SS-EN-ISO-9377-2 - Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000)
• SS-EN-ISO-9562 - Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004)
• SS-EN-ISO-9963-1 - Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity (ISO 9963-1:1994)
• SS-EN-ISO-9963-2 - Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994)
• UNE-EN-16691 - Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• UNE-EN-16693 - Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
• UNE-EN-16694 - Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
• UNE-EN-ISO-17294-2 - Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes