Document Center List of Standards on Explosion Protection Electrical Apparatus For Explosive Atmospheres, See 29.260.20 Explosives And Pyrotechnics, See 71.100.30
ICS Code 13.230
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-E1226 - Standard Test Method for Explosibility of Dust Clouds
- ASTM-E1231 - Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
- ASTM-E1248 - Standard Practice for Shredder Explosion Protection
- ASTM-E1491 - Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM-E1515 - Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
- ASTM-E2019 - Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
- ASTM-E2021 - Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
- ASTM-E2520 - Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
- ASTM-E2639 - Standard Test Method for Blast Resistance of Trash Receptacles
- ASTM-E2677 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
- ASTM-E2831 - Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
- ASTM-E2931 - Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
- ASTM-E789 - Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel
- ASTM-F2069 - Standard Practice for Evaluation of Explosives Vapor Detectors (Withdrawn 2009)
- ASTM-G126 - Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- ASTM-G72 - Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
- ASTM-G74 - Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
BSI:
- BS-6656 - Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
- BS-6657 - Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
- BS-6713-1 - Explosion protection systems. Method for determination of explosion indices of combustible dusts in air
- BS-6713-2 - Explosion protection systems. Method for determination of explosion indices of combustible gases in air
- BS-6713-3 - Explosion protection systems. Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
- BS-6713-4 - Explosion protection systems. Method for determination of efficacy of explosion suppression systems
- BS-6959 - Code of practice for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases (other than for mining applications or explosives processing and manufacture)
- BS-EN-1127-1 - Explosive atmospheres. Explosion prevention and protection
- BS-EN-1127‑1 - Explosive atmospheres. Explosion prevention and protection
- BS-EN-1127-2 - Explosive atmospheres. Explosion prevention and protection
- BS-EN-12874 - Flame Arresters, Performance Requirements, Test Methods & Limits for Use
- BS-EN-13123-1 - Windows, doors and shutters. Explosion resistance. Requirements and classification
- BS-EN-13124-1 - Windows, doors and shutters. Explosion resistance. Test method
- BS-EN-13237 - Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
- BS-EN-13463-1 - Non-electrical equipment for use in potentially explosive atmospheres
- BS-EN-13463-2 - Non-electrical equipment for use in potentially explosive atmospheres
- BS-EN-13463-3 - Non-electrical equipment for use in potentially explosive atmospheres
- BS-EN-13463-5 - Non-electrical equipment intended for use in potentially explosive atmospheres. Protection by constructional safety 'c'
- BS-EN-13463-6 - Non-electrical equipment for potentially explosive atmospheres. Protection by control of ignition source 'b'
- BS-EN-13463-8 - Non-electrical equipment for potentially explosive atmospheres. Protection by liquid immersion 'k'
- BS-EN-13541 - Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
- BS-EN-13673-1 - Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- BS-EN-13673-2 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum rate of explosion pressure rise
- BS-EN-13821 - Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures
- BS-EN-14034-1 - Determination of explosion characteristics of dust clouds
- BS-EN-14034-2 - Determination of explosion characteristics of dust clouds
- BS-EN-14034-3 - Determination of explosion characteristics of dust clouds
- BS-EN-14034-4 - Determination of explosion characteristics of dust clouds. Determination of the limiting oxygen concentration LOC of dust clouds
- BS-EN-14373 - Explosion suppression systems
- BS-EN-14460 - Explosion resistant equipment
- BS-EN-14460-TC - Tracked Changes. Explosion resistant equipment
- BS-EN-14491 - Dust explosion venting protective systems
- BS-EN-14522 - Determination of the auto ignition temperature of gases and vapours
- BS-EN-14591-1 - Explosion prevention and protection in underground mines. Protective systems
- BS-EN-14591-2 - Explosion prevention and protection in underground mines. Protective systems
- BS-EN-14591-4 - Explosion prevention and protection in underground mines. Protective systems
- BS-EN-14756 - Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
- BS-EN-14797 - Explosion venting devices
- BS-EN-14853 - Aerosol containers. Enclosed space ignition test
- BS-EN-14983 - Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage
- BS-EN-14994 - Gas explosion venting protective systems
- BS-EN-15089 - Explosion isolation systems
- BS-EN-15188 - Determination of the spontaneous ignition behaviour of dust accumulations
- BS-EN-15198 - Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
- BS-EN-15233 - Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
- BS-EN-15967 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- BS-EN-16009 - Flameless explosion venting devices
- BS-EN-16020 - Explosion diverters
- BS-EN-16447 - Explosion isolation flap valves
- BS-EN-17624 - Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air
- BS-EN-1834-1 - Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres
- BS-EN-1834-2 - Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres
- BS-EN-1834-3 - Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres
- BS-EN-1839 - Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
- BS-EN-50495 - Safety devices required for the safe functioning of equipment with respect to explosion risks
- BS-EN-60079-0 - Explosive atmospheres
- BS-EN-60079-1 - Explosive atmospheres
- BS-EN-60079-10 - Electrical apparatus for explosive gas atmospheres
- BS-EN-60079-10-1 - Explosive atmospheres
- BS-EN-60079-10-2 - Explosive atmospheres
- BS-EN-60079-10-2-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-14 - Explosive atmospheres
- BS-EN-60079-17 - Explosive atmospheres
- BS-EN-60079-18 - Explosive atmospheres
- BS-EN-60079-2 - Explosive atmospheres
- BS-EN-60079-26 - Explosive atmospheres
- BS-EN-62244 - Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
- BS-EN-IEC-60079-0 - Explosive atmospheres
- BS-EN-IEC-60079-10-1 - Explosive atmospheres
- BS-EN-IEC-60079-17-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-60079-25 - Explosive atmospheres
- BS-EN-IEC-60079-25-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-62244 - Radiation protection instrumentation. Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
- BS-EN-IEC-62244-TC - Tracked Changes. Radiation protection instrumentation. Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
- BS-EN-ISO-80079-36 - Explosive atmospheres
- BS-EN-ISO-80079-37 - Explosive atmospheres
- BS-EN-ISO/IEC-80079-34 - Explosive atmospheres
- BS-EN-ISO/IEC-80079-34 EXPERT COM - Expert Commentary for BS EN ISO/IEC 80079‑34:2020. Explosive atmospheres. Application of quality systems for ex product manufacture
- BS-EN-ISO/IEC-80079-34-TC - Tracked Changes. Explosive atmospheres
- PAS-300 - Civilian armoured vehicle. Test methods for ballistic and blast protection
- PAS-300-TC - Tracked Changes. Civilian armoured vehicle. Test methods for ballistic and blast protection
- PD-6686 - Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
- PD-CEN-15281 - Potentially explosive atmospheres. Explosion prevention and protection. Guidance on inerting for the prevention of explosions
- PD-CEN-16829 - Fire and explosion prevention and protection for bucket elevators
- PD-CLC-50404 - Electrostatics. Code of practice for the avoidance of hazards due to static electricity
- PD-CLC-50426 - Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
- PD-CLC-50427 - Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
- PD-CLC-60079-32-1 - Explosive atmospheres
- PD-CLC-60079-32-1-TC - Tracked Changes. Explosive atmospheres
- PD-CLC-IEC-60079-43 - Explosive atmospheres
- PD-IEC-60079-43 - Explosive atmospheres
ISO:
- ISO-6184-1 - Explosion protection systems - Part 1 : Determination of explosion indices of combustible dusts in air
- ISO-6184-2 - Explosion protection systems - Part 2 : Determination of explosion indices of combustible gases in air
- ISO-6184-3 - Explosion protection systems - Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
- ISO-6184-4 - Explosion protection systems - Part 4 : Determination of efficacy of explosion suppression systems
- ISO-80079-36 - Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
- ISO-80079-37 - Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of protection constructional safety "c", control of ignition source "b", liquid immersion "k"
- ISO/IEC-80079-20-1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
- ISO/IEC-80079-20-2 - Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods
- ISO/IEC-80079-38 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines
Other SDOs:
- DIN-EN-1127-2 - Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining; German version EN 1127-2:2014
- DIN-EN-13123-2 - Part 2: Range Test, Windows, Doors & Shutters, Explosion Resistance - Requirements & C
- DIN-EN-13124-2 - Part 2: Range Test, Windows, Doors & Shutters, Explosion Resistance - Test Method
- DIN-EN-13463-1 - Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements; German version EN 13463-1:2009
- DIN-EN-13463-2 - Part 2: Protection by Flow Restricting Enclosure 'Fr', Non-Electrical Equipment Intend
- DIN-EN-13463-3 - Part 3: Protection by Flameproof Enclosure 'D', Non-Electrical Equipment for Use in Po
- DIN-EN-13463-5 - Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'; German version EN 13463-5:2011
- DIN-EN-13463-6 - Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source "b"; German version EN 13463-6:2005
- DIN-EN-13463-8 - Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'; German version EN 13463-8:2003
- DIN-EN-13673-2 - Part 2: Determination of the Maximum Rate of Explosion Pressure Rise, Determination Of
- DIN-EN-14034-1 - Part 1: Determination of the Maximum Explosion Pressure P Max of Dust Clouds, Determin
- DIN-EN-14034-2 - Part 2: Determination of the Maximum Rate of Explosion Pressure Rise (Dp/Dt) Max of Du
- DIN-EN-14034-3 - Part 3: Determination of the Lower Explosion Limit Lel of Dust Clouds, Determination O
- DIN-EN-14034-4 - Part 4: Determination of the Limiting Oxygen Concentration Loc of Dust Clouds, Determi
- DIN-EN-14373 - Explosion Suppression Systems
- DIN-EN-14460 - Explosion Resistant Equipment
- DIN-EN-14491 - Dust explosion venting protective systems; German version EN 14491:2012
- DIN-EN-14522 - Determination of the Auto Ignition Temperature of Gases & Vapours
- DIN-EN-14591-1 - Part 1: 2-Bar Explosion-Proof Ventilation Structure, Explosion Prevention & Protection
- DIN-EN-14756 - Determination of the Limiting Oxygen Concentration (Loc) for Flammable Gases and Vapours
- DIN-EN-14797 - Explosion Venting Devices
- DIN-EN-14853 - Aerosol - Containers - Enclosed Space Ignition Test
- DIN-EN-1839 - Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017
- EN-1127-1 - Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
- EN-1127-2 - Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
- EN-13237 - Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
- EN-13463-1 - Part 1: Basic Method & Requirements, Non-Electrical Equipment for Use in Potentially E
- EN-13463-2 - Part 2: Protection by Flow Restricting Enclosure 'Fr', Non-Electrical Equipment Intend
- EN-13463-3 - Non-Electrical Equipment Ofr Use in Potentially Explosive Atmospheres, Protection by F
- EN-13463-5 - Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
- EN-13463-6 - Part 6: Protection by Control of Ignition Source 'B', Non-Electrical Equipment for Use
- EN-13541 - Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
- EN-13673-2 - Part 2: Determination of the Maximum Rate of Explosion Pressure Rise, Determination Of
- EN-14034-1 - Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
- EN-14034-2 - Part 2: Determination of the Maximum Rate of Explosion Pressure Rise (Dp/Dt) Max of Du
- EN-14034-3 - Part 3: Determination of the Lower Explosion Limit Lel of Dust Clouds, Determination O
- EN-14034-4 - Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
- EN-14373 - Explosion Suppression Systems
- EN-14460 - Explosion Resistant Equipment
- EN-14491 - Dust explosion venting protective systems
- EN-14522 - Determination of the Auto Ignition Temperature of Gases & Vapours
- EN-14591-1 - Part 1: 2-Bar Explosion-Proof Ventilation Structure, Explosion Prevention & Protection
- EN-14591-2 - Explosion Prevention & Protection in Underground Mines, Protective Systems, Passive Wa
- EN-14591-4 - Part 4: Automatic Extinguishing Systems for Road Headers, Explosion Prevention & Prote
- EN-14756 - Determination of the Limiting Oxygen Concentration (Loc) for Flammable Gases & Vapours
- EN-14797 - Explosion Venting Devices
- EN-14853 - Aerosol Containers - Enclosed Space Ignition Test
- EN-15089 - Explosion Isolation Systems
- EN-15188 - Determination of the Spontaneous Ignition Behaviour of Dust Accumulations
- EN-15198 - Methodology for the Risk Assessment of Non-Electrical Equipment & Components for Inten
- EN-15233 - Methodology for Functional Safety Assessment of Protective Systems for Potentially Exp
- EN-15967 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- EN-16009 - Flameless explosion venting devices
- EN-16020 - Explosion diverters
- EN-16447 - Explosion isolation flap valves
- EN-1839 - Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
- EN-50495 - Safety Devices Required for the Safe Functioning of Equipment With Respect To Explosio
- EN-60079-10-1 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
- EN-60079-10-2 - Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
- EN-60079-18 - Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'
- EN-60079-26 - Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
- SIS-CEN/TR-15281 - Potentially explosive atmospheres - Explosion prevention and protection - Guidance on inerting for the prevention of explosions
- SIS-CEN/TR-16829 - Fire and explosion prevention and protection for bucket elevators
- SIS-CEN/TR-17838 - Use of plugs of bulk material in screw conveyors and product receivers for explosion isolation
- SIS-ISO/TS-13399-100 - Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries
- SS-EN-1127-1 - Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
- SS-EN-1127-2 - Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
- SS-EN-12245 - Transportable gas cylinders - Fully wrapped composite cylinders
- SS-EN-12874 - Flame arresters - Performance requirements, test methods and limits for use
- SS-EN-13123-1 - Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
- SS-EN-13123-2 - Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
- SS-EN-13124-1 - Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube
- SS-EN-13124-2 - Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
- SS-EN-13237 - Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
- SS-EN-13463-1 - Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
- SS-EN-13463-2 - Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure "fr"
- SS-EN-13463-3 - Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
- SS-EN-13463-5 - Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
- SS-EN-13463-6 - Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b'
- SS-EN-13463-8 - Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'
- SS-EN-13541 - Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
- SS-EN-13673-1 - Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure
- SS-EN-13673-2 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise
- SS-EN-13821 - Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures
- SS-EN-13980 - Potentially explosive atmospheres - Application of quality systems
- SS-EN-14034-1 - Determination of the explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
- SS-EN-14034-2 - Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds
- SS-EN-14034-3 - Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
- SS-EN-14034-4 - Determination of the explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
- SS-EN-14373 - Explosion suppression systems
- SS-EN-14460 - Explosion resistant equipment
- SS-EN-14491 - Dust explosion venting protective systems
- SS-EN-14522 - Determination of the auto ignition temperature of gases and vapours
- SS-EN-14591-1 - Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
- SS-EN-14591-2 - Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water through barriers
- SS-EN-14591-4 - Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
- SS-EN-1459-2 - Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
- SS-EN-14756 - Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
- SS-EN-14797 - Explosion venting devices
- SS-EN-15089 - Explosion isolation systems
- SS-EN-15188 - Determination of the spontaneous ignition behaviour of dust accumulations
- SS-EN-15198 - Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
- SS-EN-15233 - Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
- SS-EN-15967 - Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
- SS-EN-16009 - Flameless explosion venting devices
- SS-EN-16020 - Explosion diverters
- SS-EN-16447 - Explosion isolation flap valves
- SS-EN-17372 - Power operated pedestrian swing door drives with self closing function - Requirements and test methods
- SS-EN-17624 - Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air
- SS-EN-1834-2 - Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
- SS-EN-1834-3 - Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
- SS-EN-1839 - Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
- SS-EN-26184-1 - Explosion protection systems - Part 1: Determination of explosion indices of combustible dusts in air
- SS-EN-26184-2 - Explosion protection systems - Part 2: Determination of explosion indices of combustible gases in air
- SS-EN-26184-3 - Explosion protection systems - Part 3: Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
- SS-EN-26184-4 - Explosion protection systems - Part 4: Determination of efficacy of explosion suppression systems
- SS-EN-ISO-13628-2 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006)
- SS-EN-ISO-16852 - Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
- SS-EN-ISO-80079-20-1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017)
- SS-EN-ISO-80079-36 - Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
- SS-EN-ISO-80079-37 - Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016)
- SS-ISO-6184-1 - Explosion protection systems - Part 1: Determination of explosion indices of combustible dusts in air
- SS-ISO-6184-2 - Explosion protection systems - Part 2: Determination of explosion indices of combustible gases in air
- SS-ISO-6184-3 - Explosion protection systems - Part 3: Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
- SS-ISO-6184-4 - Explosion protection systems - Part 4: Determination of efficacy of explosion suppression systems
- UNE-EN-60079-32-2 - Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests