Document Center List of Standards on Electroacoustics Including Sound Level Meters
ICS Code 17.140.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E3091 - Standard Specification for Systems to Measure Sound Levels
- ASTM-E597 - Practice for Determining A Single-Number Rating of Airborne Sound Isolation for Use in Multiunit Building Specifications (Withdrawn 1999)
BSI:
- BS-2497-4 - Specification for a reference zero for the calibration of pure-tone audiometers. Normal threshold of hearing for pure tones by bone conduction
- BS-3539 - Specification for sound level meters for the measurement of noise emitted by motor vehicles
- BS-5653 - Specification for hydrophones for calibration purposes
- BS-5966 - Specification for audiometers
- BS-6083-1 - Hearing aids. Method for measurement of characteristics of hearing aids with induction pick-up coil input
- BS-6083-11 - Hearing aids. Specification for symbols and other markings on hearing aids and related equipment
- BS-6083-2 - Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits
- BS-6083-3 - Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aid equipment not entirely worn on the listener
- BS-6083-9 - Hearing aids
- BS-6950 - Specification for a standard reference zero for the calibration of pure tone bone conduction audiometers
- BS-7041 - Specification for characteristics and calibration of hydrophones for operation in the frequency range 0.5 MHz to 15 MHz
- BS-7594 - Code of practice for audio-frequency induction-loop systems (AFILS)
- BS-8083-1 - Hearing aids. Method for measurement of characteristics of hearing aids with induction pick-up coil input
- BS-EN-50332-1 - Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology
- BS-EN-50332-2 - Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology
- BS-EN-50332-3 - Sound system equipment: headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology
- BS-EN-60118-0 - Electroacoustics. Hearing aids
- BS-EN-60118-1 - Hearing aids
- BS-EN-60118-12 - Hearing aids
- BS-EN-60118-13 - Electroacoustics. Hearing aids
- BS-EN-60118-15 - Electroacoustics. Hearing aids
- BS-EN-60118-2 - Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits
- BS-EN-60118-4 - Electroacoustics. Hearing aids. Induction-loop systems for hearing aid purposes. System performance requirements
- BS-EN-60118-6 - Hearing aids
- BS-EN-60118-7 - Electroacoustics. Hearing aids
- BS-EN-60118-8 - Electroacoustics. Hearing aids
- BS-EN-60318-1 - Electroacoustics. Simulators of human head and ear
- BS-EN-60318-3 - Electroacoustics. Simulators of human head and ear
- BS-EN-60318-4 - Electroacoustics. Simulators of human head and ear
- BS-EN-60318-5 - Electroacoustics. Simulators of human head and ear
- BS-EN-60318-6 - Electroacoustics. Simulators of human head and ear
- BS-EN-60500 - Underwater acoustics. Hydrophones. Properties of hydrophones in the frequency range 1 Hz to 500 kHz
- BS-EN-60565 - Underwater acoustics. Hydrophones. Calibration in the frequency range 0,01 Hz to 1 MHz
- BS-EN-60601-2-37 - Medical electrical equipment
- BS-EN-60601-2-62 - Medical electrical equipment
- BS-EN-60601-2-66 - Medical electrical equipment
- BS-EN-60645-1 - Electroacoustics. Audiometric equipment
- BS-EN-60645-3 - Electroacoustics. Audiometric equipment
- BS-EN-60645-5 - Electroacoustics. Audiometric equipment
- BS-EN-60645-6 - Electroacoustics. Audiometric equipment
- BS-EN-60645-7 - Electroacoustics. Audiometric equipment
- BS-EN-60651 - Specification for Sound Level Meters
- BS-EN-60804 - Integrating-averaging sound level meters
- BS-EN-60942 - Electroacoustics. Sound calibrators
- BS-EN-61027 - Specification for Instruments for the Measurement of Aural Acoustic Impedance/Admittan
- BS-EN-61094-1 - Specification for measurement microphones
- BS-EN-61094-2 - Electroacoustics. Measurement microphones
- BS-EN-61094-3 - Electroacoustics. Measurement microphones
- BS-EN-61094-5 - Electroacoustics. Measurement microphones
- BS-EN-61094-5-TC - Tracked Changes. Electroacoustics. Measurement microphones
- BS-EN-61094-8 - Electroacoustics. Measurement microphones
- BS-EN-61101 - Specification for absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz
- BS-EN-61102 - Specification for measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHz to 15 MHz
- BS-EN-61157 - Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
- BS-EN-61161 - Ultrasonics. Power measurement. Radiation force balances and performance requirements
- BS-EN-61206 - Ultrasonics. Continuous-wave Doppler systems. Test procedures
- BS-EN-61220 - Ultrasonics. Fields. Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz
- BS-EN-61260 - Electroacoustics. Octave-band and fractional-octave-band filters
- BS-EN-61260-1 - Electroacoustics. Octave-band and fractional-octave-band filters
- BS-EN-61260-2 - Electroacoustics. Octave-band and fractional-octave band filters
- BS-EN-61260-3 - Electroacoustics. Octave-band and fractional-octave-band filters
- BS-EN-61260-3-TC - Tracked Changes. Electroacoustics. Octave-band and fractional-octave-band filters
- BS-EN-61391-1 - Ultrasonics. Pulse-echo scanners
- BS-EN-61391-2 - Ultrasonics. Pulse-echo scanners
- BS-EN-61669 - Electroacoustics. Measurement of real-ear acoustical performance characteristics of hearing aids
- BS-EN-61672-1 - Electroacoustics. Sound level meters
- BS-EN-61672-2 - Electroacoustics. Sound level meters
- BS-EN-61672-3 - Electroacoustics. Sound level meters
- BS-EN-62092 - Ultrasonics. Hydrophones. Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
- BS-EN-62127-1 - Ultrasonics. Hydrophones
- BS-EN-62127-2 - Ultrasonics. Hydrophones
- BS-EN-62127-3 - Ultrasonics. Hydrophones
- BS-EN-62359 - Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
- BS-EN-62489-1 - Electroacoustics. Audio-frequency induction loop systems for assisted hearing
- BS-EN-62489-2 - Electroacoustics. Audio-frequency induction loop systems for assisted hearing
- BS-EN-62555 - Ultrasonics. Power measurement. High intensity therapeutic ultrasound (HITU) transducers and systems
- BS-EN-62585 - Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
- BS-EN-IEC-60118-13 - Electroacoustics. Hearing aids
- BS-EN-IEC-60118-4 - Electroacoustics. Hearing aids
- BS-EN-IEC-60118-9 - Electroacoustics. Hearing aids
- BS-EN-IEC-60263 - Scales and sizes for plotting frequency characteristics and polar diagrams
- BS-EN-IEC-60565-2 - Underwater acoustics. Hydrophones. Calibration of hydrophones
- BS-EN-IEC-60601-2-66 - Medical electrical equipment
- BS-EN-IEC-60645-3 - Electroacoustics. Audiometric equipment
- BS-EN-IEC-60645-6 - Electroacoustics. Audiometric equipment
- BS-EN-IEC-60942 - Electroacoustics. Sound calibrators
- BS-EN-IEC-61265-TC - Tracked Changes. Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- BS-EN-IEC-61828 - Ultrasonics. Transducers. Definitions and measurement methods regarding focusing for the transmitted fields
- BS-EN-IEC-62127-1 - Ultrasonics. Hydrophones
- BS-EN-IEC-62127-1-TC - Tracked Changes. Ultrasonics. Hydrophones
- BS-EN-IEC-62127-3 - Ultrasonics. Hydrophones
- BS-EN-IEC-62127-3-TC - Tracked Changes. Ultrasonics. Hydrophones
- BS-EN-IEC-63009 - Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz
- BS-EN-IEC-63045 - Ultrasonics. Non-focusing short pressure pulse sources including ballistic pressure pulse sources. Characteristics of fields
- BS-EN-ISO-389-1 - Acoustics. Reference zero for the calibration of audiometric equipment
- BS-EN-ISO-389-1-TC - Tracked Changes. Acoustics. Reference zero for the calibration of audiometric equipment
- BS-EN-ISO-8253-2 - Acoustics. Audiometric test methods
- BS-EN-ISO-9612 - Acoustics. Determination of occupational noise exposure. Engineering method
- BS-IEC-60118-7 - Electroacoustics. Hearing aids. Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
- BS-IEC-62359 - Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
- BS-ISO-12124 - Acoustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
- DD-IEC-60318-7 - Electroacoustics. Simulators of human head and ear
- DD-IEC-61094-7 - Measurement microphones. Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
- DD-IEC-62370 - Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatability requirements and test procedures
- PD-IEC-60318-7 - Electroacoustics. Simulators of human head and ear
- PD-IEC-60318-7-TC - Tracked Changes. Electroacoustics. Simulators of human head and ear
- PD-IEC-61094-10 - Electroacoustics. Measurement microphones
- PD-IEC-62370 - Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatibility requirements and test procedures
- PD-IEC-62462 - Ultrasonics. Output test. Guidance for the maintenance of ultrasound physiotherapy systems
- PD-IEC-62556 - Ultrasonics. Field characterization. Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
- PD-IEC-62736 - Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system's elementary performance
- PD-IEC-62736-TC - Tracked Changes. Ultrasonics. Pulse-echo scanners. Simple methods for periodic testing to verify stability of an imaging system's elementary performance
- PD-IEC-62791 - Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types
- PD-IEC-62809 - Summary of requirements and tests to products in the scope of IEC 60601-2-66
- PD-IEC-62886 - Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz
- PD-IEC-62903 - Ultrasonics. Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method
- PD-IEC-62903-TC - Tracked Changes. Ultrasonics. Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method
- PD-IEC-63001 - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- PD-IEC-63001-TC - Tracked Changes. Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- PD-IEC-63070 - Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air
- PD-IEC-63079 - Code of practice for hearing-loop systems (HLS)
- PD-IEC-63081 - Ultrasonics. Methods for the characterization of the ultrasonic properties of materials
IEC:
- IEC-1043 - Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones
- IEC-1088 - Characteristics and measurements of ultrasonic piezoceramic transducers
- IEC-1094-3 - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
- IEC-1094-4 - Measurement microphones - Part 4: Specifications for working standard microphones
- IEC-118-0 - Hearing aids. Part 0: Measurement of electroacoustical characteristics
- IEC-118-0-1 - Amendment No. 1
- IEC-118-12 - Hearing aids - Part 12: Dimensions of electrical connector systems
- IEC-118-2 - Hearing aids. Part 2: Hearing aids with automatic gain control circuits
- IEC-118-2-1 - Amendment No. 1
- IEC-1183 - Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
- IEC-118-5 - Hearing aids. Part 5: Nipples for insert earphones
- IEC-118-9 - Hearing aids. Part 9: Methods of measurement of characteristics of hearing aids with bone vibrator output
- IEC-1206 - Ultrasonics - Continuous-wave Doppler systems - Test procedures
- IEC-1260 - Electroacoustics - Octave-band and fractional-octave-band filters
- IEC-1265 - Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave-band sound pressure levels in noise certification of transport-category aeroplanes
- IEC-1266 - Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting
- IEC-263 - Scales and sizes for plotting frequency characteristics and polar diagrams
- IEC-500 - IEC standard hydrophone
- IEC-60050-801-AM1 - Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60050-801-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60118-0 - Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
- IEC-60118-1 - Hearing aids - Part 1: Hearing aids with induction pick-up coil input
- IEC-60118-1-1 - Amendment 1
- IEC-60118-13 - Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices
- IEC-60118-14 - Hearing aids - Part 14: Specification of a digital interface device
- IEC-60118-15 - Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
- IEC-60118-16 - Electroacoustics - Hearing aids - Part 16: Definition and verification of hearing aid features
- IEC-60118-2-2 - Amendment No. 2
- IEC-60118-3 - Part 3: Hearing Aid Equipment Not Entirely Worn on the Listener
- IEC-60118-4 - Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
- IEC-60118-4-1 - Amendment 1 - Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
- IEC-60118-6 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids
- IEC-60118-7 - Electroacoustics - Hearing aids - Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
- IEC-60118-8 - Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated [in situ] working conditions
- IEC-60118-9 - Electroacoustics . Hearing aids . Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids
- IEC-60263 - Scales and sizes for plotting frequency characteristics and polar diagrams
- IEC-60318-1 - Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones
- IEC-60318-2 - Part 2: an Interim Acoustic Coupler for the Calibration of Audiometric Earphones in the Ex
- IEC-60318-3 - Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
- IEC-60318-4 - Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
- IEC-60318-5 - Electroacoustics - Simulators of human head and ear - Part 5: 2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
- IEC-60318-6 - Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement on bone vibrators
- IEC-60318-7 - Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear
- IEC-60318-8 - Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts
- IEC-60500 - Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
- IEC-60565 - Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz
- IEC-60565-1 - Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones
- IEC-60565-2 - Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration
- IEC-60601-2-37 - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- IEC-60601-2-37-1 - Amendment 1 - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- IEC-60601-2-37-2 - Amendment 2: Medical Electrical Equipment - Part 2-37: Particular Requirements for The
- IEC-60601-2-62 - Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
- IEC-60601-2-66 - Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
- IEC-60601-2-66-RL - Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
- IEC-60645-1 - Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
- IEC-60645-1-RL - Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
- IEC-60645-3 - Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
- IEC-60645-5 - Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
- IEC-60645-6 - Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
- IEC-60645-6-RL - Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
- IEC-60645-7 - Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses
- IEC-60942 - Electroacoustics - Sound calibrators
- IEC-60942-RL - Electroacoustics - Sound calibrators
- IEC-61094-1 - Measurement microphones - Part 1: Specifications for laboratory standard microphones
- IEC-61094-10 - Electroacoustics - Measurement microphones - Part 10: Absolute pressure calibration of microphones at low frequencies using calculable pistonphones
- IEC-61094-2 - Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
- IEC-61094-2-AM1 - Amendment 1 - Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
- IEC-61094-3 - Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
- IEC-61094-5 - Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
- IEC-61094-6 - Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response
- IEC-61094-7 - Measurement microphones - Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
- IEC-61094-8 - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
- IEC-61157 - Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
- IEC-61157-AM1 - Amendment 1 - Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
- IEC-61161 - Ultrasonics - Power measurement - Radiation force balances and performance requirements
- IEC-61252 - Electroacoustics - Specifications for personal sound exposure meters
- IEC-61252-1 - Amendment 1
- IEC-61252-AM2 - Amendment 2 - Electroacoustics - Specifications for personal sound exposure meters
- IEC-61260-1 - Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
- IEC-61260-2 - Electroacoustics - Octave-band and fractional-octave band filters - Part 2: Pattern evaluation tests
- IEC-61260-2-AM1 - Amendment 1 - Electroacoustics - Octave-band and fractional-octave band filters - Part 2: Pattern evaluation tests
- IEC-61260-3 - Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests
- IEC-61260-AM1 - Amendment 1
- IEC-61265 - Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- IEC-61391-1 - Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of point-spread function response
- IEC-61391-1-AM1 - Amendment 1 - Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of point-spread function response
- IEC-61391-2 - Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range
- IEC-61669 - Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
- IEC-61672-1 - Electroacoustics - Sound level meters - Part 1: Specifications
- IEC-61672-2 - Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
- IEC-61672-3 - Electroacoustics - Sound level meters - Part 3: Periodic tests
- IEC-61685 - Ultrasonics - Flow measurement systems - Flow test object
- IEC-61828 - Ultrasonics - Transducers - Definitions and measurement methods regarding focusing for the transmitted fields
- IEC-61842 - Microphones and earphones for speech communications
- IEC-61847 - Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics
- IEC-61895 - Ultrasonics - Pulsed Doppler diagnostic systems - Test procedures to determine performance
- IEC-61949 - Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams
- IEC-62092 - Ultrasonics - Hydrophones - Characteristics & Calibration in the Frequency Range From
- IEC-62127-1 - Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields
- IEC-62127-1-RL - Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields
- IEC-62127-2 - Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz
- IEC-62127-2-AM2 - Amendment 2 - Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz
- IEC-62127-3 - Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields
- IEC-62127-3-AM1 - Amendment 1 - Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz
- IEC-62306 - Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
- IEC-62359 - Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
- IEC-62359-AM1 - Amendment 1 - Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
- IEC-62370 - Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
- IEC-62370-AM1 - Amendment 1 - Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
- IEC-62462 - Ultrasonics - Output test - Guidance for the maintenance of ultrasound physiotherapy systems
- IEC-62489-1 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
- IEC-62489-1-AM1 - Amendment 1 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
- IEC-62489-1-AM2 - Amendment 2 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
- IEC-62489-2 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
- IEC-62555 - Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems
- IEC-62556 - Ultrasonics - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
- IEC-62558 - Ultrasonics - Real-time pulse-echo scanners - Phantom with cylindrical, artificial cysts in tissue-mimicking material and method for evaluation and periodic testing of 3D-distributions of void-detectability ratio (VDR)
- IEC-62585 - Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
- IEC-62649 - Requirements for measurement standards for high intensity therapeutic ultrasound (HITU) devices
- IEC-62736 - Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance
- IEC-62736-RL - Ultrasonics - Pulse-echo scanners - Simple methods for periodic testing to verify stability of an imaging system's elementary performance
- IEC-62781 - Ultrasonics - Conditioning of water for ultrasonic measurements
- IEC-62791 - Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types
- IEC-62809 - Summary of requirements and tests to products in the scope of IEC 60601-2-66
- IEC-62809-RL - Summary of requirements and tests to products in the scope of IEC 60601-2-66
- IEC-62886 - Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz
- IEC-62903 - Ultrasonics - Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method
- IEC-62903-RL - Ultrasonics - Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method
- IEC-63001 - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- IEC-63001-RL - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- IEC-63009 - Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz
- IEC-63045 - Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields
- IEC-63070 - Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air
- IEC-63079 - Code of practice for hearing-loop systems (HLS)
- IEC-63079-AM1 - Amendment 1 - Code of practice for hearing-loop systems (HLS)
- IEC-63079-AM2 - Amendment 2 - Code of practice for hearing-loop systems (HLS)
- IEC-63081 - Ultrasonics - Methods for the characterization of the ultrasonic properties of materials
- IEC-63305 - Underwater acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz
- IEC-645-2 - Audiometers - Part 2: Equipment for speech audiometry
- IEC-782 - Measurements of ultrasonic magnetostrictive transducers
- IEC-886 - Investigations on test procedures for ultrasonic cleaners
ISO:
Other SDOs:
- DIN-45657 - Sound level meters - Additional requirements for special measuring tasks
- DIN-EN-ISO-389-5 - Part 5: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones in the Fre
- EN-12102 - Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airbone noise - Determination of the sound power level
- EN-50332-1 - Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for 'one package equipment'
- EN-50332-2 - Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
- EN-50332-3 - Sound system equipment: headphones and earphones associated with personal music players - maximum sound pressure level measurement methodology - Part 3: measurement method for sound dose management
- EN-60118-0 - Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
- EN-60118-12 - Hearing Aids, Dimensions of Electrical Connector Systems
- EN-60118-13 - Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC)
- EN-60118-15 - Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
- EN-60118-4 - Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
- EN-60118-6 - Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
- EN-60318-1 - Part 1: Ear Simulator for the Measurement of Supra-Aural & Circumaural
- EN-60318-3 - Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
- EN-60318-4 - Part 4: Occluded-Ear Simulator for the Measurement of Earphones Coupled To the Ear By
- EN-60318-5 - Electroacoustics, Simulators of Human Head & Ear, 2 cm Coupler for the Measurement Of
- EN-60318-6 - Electroacoustics, Simulators of Human Head & Ear, Mechanical Coupler for the Measureme
- EN-60500 - Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
- EN-60565 - Underwater Acoustics, Hydrophones, Calibration in the Frequency Range, 0,01 Hz To 1 Mh
- EN-60601-2-37 - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- EN-60601-2-62 - Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
- EN-60601-2-66 - Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- EN-60645-1 - Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
- EN-60645-3 - Electroacoustics, Audiometric Equipment, Test Signals of Short Duration
- EN-60645-6 - Part 6: Instruments for the Measurement of Otoacoustic Emissions, Electroacoustics - A
- EN-60645-7 - Part 7: Instruments for the Measurement of Auditory Brainstem Responses, Electroacoust
- EN-61094-2 - Electroacoustics, Measurement Microphones, Primary Method for Pressure Calibration Of
- EN-61094-3 - Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
- EN-61094-5 - Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
- EN-61094-8 - Electroacoustics - Measurement microphones - Part 8: Methods for free-field calibration of working standard microphones by comparison
- EN-61157 - Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
- EN-61161 - Ultrasonics - Power measurement - Radiation force balances and performance requirements
- EN-61260-1 - Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
- EN-61260-2 - Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests
- EN-61260-3 - Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests
- EN-61391-1 - Ultrasonics, Pulse-Echo Scanners, Techniques for Calibrating Spatial Measurement Syste
- EN-61391-2 - Part 2: Measurement of Maximum Depth of Penetration & Local Dynamic Range, Ultrasonic
- EN-61669 - Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
- EN-61672-1 - Electroacoustics - Sound level meters - Part 1: Specifications
- EN-61672-2 - Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
- EN-61672-3 - Electroacoustics - Sound level meters - Part 3: Periodic tests
- EN-62127-3 - Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz
- EN-62359 - Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
- EN-62489-1 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
- EN-62489-2 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
- EN-62555 - Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems
- EN-62585 - Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
- EN-IEC-60942 - Electroacoustics - Sound calibrators
- EN-IEC-61265 - Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- EN-ISO-8253-2 - Part 2: Sound Field Audiometry With Pure-Tone & Narrow-Band Test Signals, Acoustics -
- EN-ISO-9612 - Acoustics - Determination of Occupational Noise Exposure - Engineering Method
- JIS-C-1508 - Electroacoustics -- Random incidence and diffuse field calibration of sound level meters
- JIS-C-1515 - Electroacoustics -- Sound calibrators
- JIS-C-5512 - Hearing aids
- SS-EN-60118-13 - Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC)
- SS-ISO-12124 - Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids
- SS-ISO-7029 - Acoustics - Threshold of hearing by air conduction as a function of age and sex for otologically normal persons
- SS-ISO-8253-1 - Acoustics - Audiometric test methods - Part 1: Basic pure tone air and bone conduction threshold audiometry
- SS-ISO-8253-2 - Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure tone and narrow band test signals
- UNE-EN-60118-0 - Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
- UNE-EN-60118-4 - Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
- UNE-EN-60601-2-66 - Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems