Document Center List of Standards on Optical Measuring Instruments Including Spectroscopes, Geodetic Instruments, Etc. Ophthalmic Optics And Instruments, See 11.040.70 Laser Equipment, See 31.260 Fibre Optics, See 33.180 Optical Equipment, Materials And Components, See 37.020 Photographic Equipment Lenses, See 37.040.10
ICS Code 17.180.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1377 - Standard Test Method for Calibration of Surface/Stress Measuring Devices (Withdrawn 2014)
- ASTM-D1747 - Standard Test Method for Refractive Index of Viscous Materials
- ASTM-D3321 - Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
- ASTM-D6122 - Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
- ASTM-D6216 - Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
- ASTM-D7726 - Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
- ASTM-E1079 - Standard Practice for Calibration of Transmission Densitometers
- ASTM-E1172 - Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer
- ASTM-E1260 - Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
- ASTM-E1303 - Standard Practice for Refractive Index Detectors Used in Liquid Chromatography
- ASTM-E1421 - Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
- ASTM-E1479 - Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
- ASTM-E1507 - Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument (Withdrawn 2003)
- ASTM-E1585 - Standard Test Method for Measuring and Calculating Emittance of Architectural Flat Glass Products Using Spectrometric Measurements (Withdrawn 2002)
- ASTM-E1767 - Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
- ASTM-E1832 - Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
- ASTM-E1840 - Standard Guide for Raman Shift Standards for Spectrometer Calibration
- ASTM-E1866 - Standard Guide for Establishing Spectrophotometer Performance Tests
- ASTM-E1944 - Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
- ASTM-E1982 - Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
- ASTM-E2175 - Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
- ASTM-E2208 - Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
- ASTM-E2387 - Standard Practice for Goniometric Optical Scatter Measurements
- ASTM-E275 - Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
- ASTM-E2808 - Standard Guide for Microspectrophotometry in Forensic Paint Analysis
- ASTM-E2809 - Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
- ASTM-E3064 - Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
- ASTM-E3124 - Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
- ASTM-E3143 - Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
- ASTM-E356 - Practices for Describing and Specifying the Spectrograph (Withdrawn 2001)
- ASTM-E387 - Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
- ASTM-E388 - Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
- ASTM-E409 - Standard Practice for Description and Performance of the Microphotometer (Withdrawn 2002)
- ASTM-E504 - Practice for Selection of Electrode Material Used in Optical Emission Spectroscopy Based on Physical Properties (Withdrawn 1998)
- ASTM-E520 - Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- ASTM-E578 - Standard Test Method for Linearity of Fluorescence Measuring Systems
- ASTM-E594 - Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
- ASTM-E685 - Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM-E840 - Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
- ASTM-E863 - Standard Practice for Describing Flame Atomic Absorption Spectroscopy Equipment (Withdrawn 2004)
- ASTM-E902 - Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers (Withdrawn 2011)
- ASTM-E925 - Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
- ASTM-E932 - Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
- ASTM-E958 - Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
- ASTM-E983 - Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
- ASTM-E995 - Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
BSI:
- BS-3625 - Specification for eyepiece and screen graticules for the determination of the particle size of powders
- BS-ISO-10109-7 - Optics and optical instruments. Environmental requirements
- BS-ISO-12858-2 - Optics and optical instruments. Ancillary devices for geodetic instruments
- BS-ISO-15472 - Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
- BS-ISO-16331-1 - Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments
- BS-ISO-16331-1-TC - Tracked Changes. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments
- BS-ISO-17123-5 - Optics and optical instruments. Field procedures for testing geodetic and surveying instruments
- BS-ISO-17123-6 - Optics and optical instruments. Field procedures for testing geodetic and surveying instruments
- BS-ISO-17123-8 - Optics and optical instruments. Field procedures for testing geodetic and surveying instruments
- BS-ISO-17123-9 - Optics and optical instruments. Field procedures for testing geodetic and surveying instruments
- BS-ISO-9849 - Optics and optical instruments. Geodetic and surveying instruments. Vocabulary
- PD-IEC/PAS-62129 - Calibration of optical spectrum analyzers
ISO:
- ISO-12857-1 - Optics and optical instruments -- Geodetic instruments -- Field procedures for determining accuracy -- Part 1: Levels
- ISO-12857-2 - Optics and optical instruments -- Geodetic instruments -- Field procedures for determining accuracy -- Part 2: Theodolites
- ISO-12857-3 - Optics and optical instruments -- Geodetic instruments -- Field procedures for determining accuracy -- Part 3: Electro-optical distance meters (EDM instruments)
- ISO-12858-1 - Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1: Invar levelling staffs
- ISO-12858-2 - Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2: Tripods
- ISO-12858-2-AM1 - - Amendment 1
- ISO-12858-3 - Optics and optical instruments - Ancillary devices for geodetic instruments - Part 3: Tribrachs
- ISO-16331-1 - Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
- ISO-17123-1 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory
- ISO-17123-2 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels
- ISO-17123-3 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites
- ISO-17123-4 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors)
- ISO-17123-5 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations
- ISO-17123-6 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
- ISO-17123-7 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments
- ISO-17123-8 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK)
- ISO-17123-9 - Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 9: Terrestrial laser scanners
- ISO-8322-5 - Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 5: Optical plumbing instruments
- ISO-9849 - Optics and optical instruments - Geodetic and surveying instruments - Vocabulary