Document Center is acquired by Nimonik

Document Center List of Standards on Electric Tools Chain- And Brush-Saws, See 65.060.80

ICS Code 25.140.20

Return to ICS Index.

Up to Level 2:

• 25.140 (Hand-held tools Tools for working with voltages, see 13.260)

The following documents are a part of this series:

ASTM:

• ASTM-F1825 - Standard Specification for Clampstick Type Live Line Tools
• ASTM-F1826 - Standard Specification for Live Line and Measuring Telescoping Tools

BSI:

• BS-2769-1 - Hand-held electric motor-operated tools
• BS-2769-2.0 - Hand-held electric motor-operated tools. Particular requirements
• BS-2769-2.11 - Hand-held electric motor-operated tools. Particular requirements. Specification for concrete vibrators
• BS-2769-2.12 - CENELEC Hd 400.3 : Section l S2Specification for Chain Saws
• BS-2769-2.13 - Hand-held electric motor-operated tools. Particular requirements. Specification for planers
• BS-2769-2.14 - Hand-held electric motor-operated tools. Particular requirements. Specification for hedge trimmers and scissor-type grass shears, Withdrawn, Replaced by BS-EN-50636-2-94
• BS-2769-2.2 - Hand-held electric motor-operated tools. Particular requirements. Specification for screwdrivers and impact wrenches
• BS-2769-2.3 - Hand-held electric motor-operated tools. Particular requirements. Specification for grinders, polishers and disc-type sanders
• BS-2769-2.4 - Hand-held electric motor-operated tools. Particular requirements. Specification for sanders
• BS-2769-2.7 - Hand-held electric motor-operated tools. Particular requirements. Specification for spray guns
• BS-7398 - Specification for hand hacksaw frames
• BS-EN-50144-1 - Safety of hand-held electric motor operated tools. General requirements
• BS-EN-50144-2-1 - Safety of hand-held electric motor operated tools. Particular requirements for drills
• BS-EN-50144-2-10 - Safety of hand-held electric motor operated tools. Particular requirements for jig saws
• BS-EN-50144-2-11 - Safety of hand-held electric motor operated tools. Particular requirements for sabre saws and double blade reciprocating saws
• BS-EN-50144-2-13 - Safety of hand-held electric motor operated tools. Particular requirements for chain saws
• BS-EN-50144-2-14 - Safety of hand-held electric motor operated tools. Particular requirements for planers
• BS-EN-50144-2-15 - Safety of hand-held electric motor operated tools. Particular requirements for hedge trimmers
• BS-EN-50144-2-17 - Safety of hand-held electric motor operated tools
• BS-EN-50144-2-18 - Safety of hand-held electric motor operated tools
• BS-EN-50144-2-2 - Safety of hand-held electric motor operated tools. Particular requirements for screwdrivers and impact wrenches
• BS-EN-50144-2-3 - Safety of hand-held electric motor operated tools. Particular requirements for grinders, disk type sanders and polishers
• BS-EN-50144-2-4 - Safety of hand-held electric motor operated tools. Particular requirements for sanders
• BS-EN-50144-2-6 - Safety of hand-held electric motor operated tools. Particular requirements for hammers
• BS-EN-50144-2-7 - Safety of hand-held electric motor operated tools. Particular requirements for spray guns
• BS-EN-50144-2-8 - Safety of hand-held electric motor operated tools. Particular requirements for circular saws and circular knives
• BS-EN-50260-1 - Safety of hand-held battery-powered motor-operated tools and battery packs. General requirements
• BS-EN-50260-2-1 - Safety of hand-held battery-powered motor-operated tools and battery packs
• BS-EN-50260-2-10 - Safety of hand-held battery-powered motor-operated tools and battery packs
• BS-EN-50260-2-14 - Safety of hand-held battery-powered motor-operated tools and battery packs
• BS-EN-50260-2-2 - Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for screwdrivers and impact wrenches
• BS-EN-50260-2-4 - Safety of hand-held battery-powered motor-operated tools and battery packs
• BS-EN-50260-2-5 - Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for circular saws and circular knives
• BS-EN-50260-2-6 - Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for hammers
• BS-EN-50260-2-7 - Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for spray guns
• BS-EN-50580 - Safety of hand-held electric motor operated tools. Particular requirements for spray guns
• BS-EN-50632-1 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-1-TC - Electric motor-operated tools. Dust measurement Procedure
• BS-EN-50632-2-1 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-11 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-14 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-17 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-19 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-22 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-3 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-4 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-5 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50632-2-6 - Electric motor-operated tools. Dust measurement procedure
• BS-EN-50636-2-94 - Household and similar electrical appliances. Safety
• BS-EN-55014 - Electromagnetic compatibility. Immunity requirements for household appliances, tools and similar apparatus. Product family standard
• BS-EN-55014-1 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
• BS-EN-55014-2 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
• BS-EN-55014-2-TC - Tracked Changes. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
• BS-EN-60335-2-45 - Household and similar electrical appliances. Safety
• BS-EN-60745-1 - Hand-held motor-operated electric tools. Safety. General requirements
• BS-EN-60745-2-1 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-11 - Generic smart grid requirements
• BS-EN-60745-2-12 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-13 - Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws
• BS-EN-60745-2-14 - Hand-held motor-operated electric tools. Safety. Particular requirements for planers
• BS-EN-60745-2-15 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-17 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-18 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-19 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-2 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-20 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-21 - Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
• BS-EN-60745-2-22 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-3 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-4 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-5 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-6 - Hand-held motor-operated electric tools. Safety
• BS-EN-60745-2-8 - Subsea equipment
• BS-EN-60745-2-9 - Hand-held motor-operated electric tools. Safety
• BS-EN-61029-1 - Safety of transportable motor-operated electric tools. General requirements
• BS-EN-61029-2-1 - Safety of transportable motor-operated electric tools
• BS-EN-61029-2-10 - Safety of transportable motor-operated electric tools. Particular requirements for cutting-off grinders
• BS-EN-61029-2-11 - Safety of transportable motor-operated electric tools
• BS-EN-61029-2-4 - Safety of transportable motor-operated electric tools. Particular requirements for bench grinders
• BS-EN-61029-2-5 - Safety of transportable motor-operated electric tools
• BS-EN-61029-2-6 - Safety of transportable motor-operated electric tools
• BS-EN-61029-2-8 - Safety of transportable motor-operated electric tools
• BS-EN-61029-2-9 - Safety of transportable motor-operated electric tools
• BS-EN-62841-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-10 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-11 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-11-TC - Tracked Changes. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-14 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-14-TC - Tracked Changes. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-17 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-21 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-5 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-8 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-2-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-3-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-3-10 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-3-12 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-3-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-3-6 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-3-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-62841-4-1 - Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery. Safety
• BS-EN-62841-4-2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-55014-1 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
• BS-EN-IEC-55014-2 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
• BS-EN-IEC-62841-2-3 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-62841-2-6 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-62841-3-5 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-62841-3-7 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-62841-3-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-62841-4-5 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-62841-4-7 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
• BS-EN-IEC-63103 - Lighting equipment. Non-active mode power measurement
• BS-EN-IEC-63474 - Electrical and electronic household and office equipment. Measurement of networked standby power consumption of edge equipment
• BS-IEC-63241-2-6 - Electric motor-operated tools. Dust measurement procedure

IEC:

• IEC-1029-1 - Safety of transportable motor-operated electric tools - Part 1: General requirements
• IEC-1029-2-1 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for circular saws
• IEC-1029-2-2 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws
• IEC-1029-2-3 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers
• IEC-1029-2-4 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for bench grinders
• IEC-1029-2-5 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for band saws
• IEC-1029-2-6 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond drills with water supply
• IEC-1029-2-7 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond saws with water supply
• IEC-1029-2-8 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders
• IEC-1176 - Hand-held electric mains voltage operated circular saws - Methods for measuring the performance
• IEC-1214 - Hand-held mains voltage operated spray guns - Performance requirements
• IEC-60335-2-45 - Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
• IEC-60335-2-45-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
• IEC-60335-2-45-AM2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
• IEC-60745-1 - Hand-held motor-operated electric tools - Safety - Part 1: General requirements
• IEC-60745-1-1 - Amendment 1 - Part 1: General Requirements - Hand-Held Motor-Operated Electric Tools
• IEC-60745-1-2 - Amendment 2: Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requiremen
• IEC-60745-2-1 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
• IEC-60745-2-11 - Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
• IEC-60745-2-1-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
• IEC-60745-2-11-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
• IEC-60745-2-12 - Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
• IEC-60745-2-12-1 - Amendment 1- Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
• IEC-60745-2-13 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
• IEC-60745-2-13/A1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
• IEC-60745-2-14 - Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
• IEC-60745-2-14-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
• IEC-60745-2-14-2 - Amendment 2 - Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
• IEC-60745-2-15 - Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
• IEC-60745-2-15-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
• IEC-60745-2-16 - Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers
• IEC-60745-2-17 - Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
• IEC-60745-2-18 - Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
• IEC-60745-2-18-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
• IEC-60745-2-19 - Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers
• IEC-60745-2-19-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers
• IEC-60745-2-2 - Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
• IEC-60745-2-20 - Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
• IEC-60745-2-20-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
• IEC-60745-2-21 - Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
• IEC-60745-2-2-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
• IEC-60745-2-21-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
• IEC-60745-2-22 - Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines
• IEC-60745-2-3 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• IEC-60745-2-3-AM1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• IEC-60745-2-3-AM2 - Amendment 2 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• IEC-60745-2-4 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
• IEC-60745-2-4-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
• IEC-60745-2-5 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
• IEC-60745-2-6 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
• IEC-60745-2-6-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
• IEC-60745-2-6-2 - Amendment 2 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
• IEC-60745-2-8 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
• IEC-60745-2-8-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
• IEC-60745-2-9 - Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
• IEC-60745-2-9-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
• IEC-61029-2-10 - Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
• IEC-61029-2-11 - Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws
• IEC-61029-2-1-1 - Amendment 1
• IEC-61029-2-1-2 - Amendment 2
• IEC-61029-2-3-1 - Amendment 1
• IEC-61029-2-4-1 - Amendment 1
• IEC-61029-2-5-1 - Amendment 1
• IEC-61939 - Saw Tables for Use as Saw Benches - Tables for Hand-Held Circular Saws With a Maximum Saw-
• IEC-62841-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
• IEC-62841-2-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
• IEC-62841-2-10 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers
• IEC-62841-2-11 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
• IEC-62841-2-11-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
• IEC-62841-2-12 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
• IEC-62841-2-12 EXV - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
• IEC-62841-2-14 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
• IEC-62841-2-17 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers
• IEC-62841-2-1-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
• IEC-62841-2-2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches
• IEC-62841-2-21 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners
• IEC-62841-2-3 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
• IEC-62841-2-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type
• IEC-62841-2-5 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws
• IEC-62841-2-6 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
• IEC-62841-2-6-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
• IEC-62841-2-8 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers
• IEC-62841-2-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
• IEC-62841-3-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
• IEC-62841-3-10 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
• IEC-62841-3-10-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
• IEC-62841-3-12 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines
• IEC-62841-3-14 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners
• IEC-62841-3-1-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
• IEC-62841-3-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
• IEC-62841-3-4-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
• IEC-62841-3-4-AM2 - Amendment 2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
• IEC-62841-3-5 -

  Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws

• IEC-62841-3-6 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
• IEC-62841-3-6-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
• IEC-62841-3-7 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws
• IEC-62841-3-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• IEC-62841-3-9-RL - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• IEC-62841-4-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
• IEC-62841-4-2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
• IEC-62841-4-2-AM1 - Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
• IEC-62841-4-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws
• IEC-62841-4-5 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears
• IEC-62841-4-6 -

  Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums

• IEC-63370 - Lithium-ion batteries and charging systems - Safety
• IEC-745-2-7 - Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for spray guns for non-flammable liquids

Other SDOs:

• AS/NZS-3350.2.45/AM3 - Amendment 3: Safety of Household & Similar Electrical Appliances - Particular Requirem
• EN-50144-2-10 - Safety of Hand-Held Electric Motor Operated Tools, Particular Requirements for Jig Saw
• EN-50260-2-10 - Part 2-10: Particular Requirements for Reciprocating Saws
• EN-50580 - Safety of hand-held electric motor operated tools - Particular requirements for spray guns
• EN-50632-1 - Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements
• EN-50632-2-1 - Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for diamond core drills
• EN-50632-2-11 - Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws
• EN-50632-2-14 - Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers
• EN-50632-2-17 - Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers
• EN-50632-2-19 - Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers
• EN-50632-2-22 - Electric motor-operated tools - Dust measurement procedure - Part 2-22: Particular requirements for cut-off machines and wall chasers
• EN-50632-2-3 - Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders and disk-type sanders
• EN-50632-2-4 - Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other than disk type
• EN-50632-2-5 - Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws
• EN-50632-2-6 - Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
• EN-60335-2-45 - Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
• EN-60745-1 - Part 1: General Requirements, Hand-Held Motor-Operated Electric Tools - Safety
• EN-60745-2-1 - Part 2-1: Particular Requirements for Drills & Impact Drills, Hand-Held Motor-Operated
• EN-60745-2-11 - Hand-Held Motor-Operated Electric Tools, Safety, Particular Requirements for Reciproc
• EN-60745-2-12 - Hand-Held Motor-Operated Electric Tools, Safety, Particular Requirements for Concrete
• EN-60745-2-13 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
• EN-60745-2-14 - Part 2-14: Particular Requirements for Planers, Hand-Held Motor-Operated Electric Tool
• EN-60745-2-15 - Part 2-15: Particular Requirements for Hedge Trimmers, Hand-Held Motor-Operated Electr
• EN-60745-2-17 - Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
• EN-60745-2-18 - Part 2-18: Particular Requirements for Strapping Tools, Hand-Held Motor-Operated Elect
• EN-60745-2-19 - Part 2-19: Particular Requirements for Jointers, Hand-Held Motor-Operated Electric Too
• EN-60745-2-2 - Part 2-2: Particular Requirements for Screwdrivers & Impact Wrenches, Hand-Held Motor
• EN-60745-2-20 - Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
• EN-60745-2-21 - Part 2-21: Particular Requirements for Drain Cleaners, Hand-Held Motor-Operated Electr
• EN-60745-2-22 - Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines
• EN-60745-2-3 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• EN-60745-2-3/A13 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• EN-60745-2-4 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
• EN-60745-2-5 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
• EN-60745-2-6 - Part 2-6: Particular Requirements for Hammers, Hand-Held Motor-Operated Electric Tools
• EN-60745-2-8 - Hand-Held Motor-Operated Electric Tools, Safety, Particular Requirements for Shears &
• EN-60745-2-9 - Part 2-9: Particular Requirements for Tappers, Hand-Held Motor-Operated Electric Tools
• EN-61029-1 - Safety of Transportable Motor-Operated Electric Tools, General Requirements
• EN-61029-2-1 - Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches
• EN-61029-2-10 - Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
• EN-61029-2-11 - Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
• EN-61029-2-3 - Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers
• EN-61029-2-4 - Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
• EN-61029-2-5 - Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
• EN-61029-2-6 - Part 2-6: Parrticular Requirements for Diamond Drills With Water Supply, Safety of TRA
• EN-61029-2-8 - Part 2-8: Particular Requirements for Single Spindle Vertical Moulders, Safety of Tran
• EN-61029-2-9 - Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
• EN-62841-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
• EN-62841-2-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
• EN-62841-2-10 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers
• EN-62841-2-14 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
• EN-62841-2-17 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held routers
• EN-62841-2-2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches
• EN-62841-2-21 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017)
• EN-62841-2-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type
• EN-62841-2-5 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws
• EN-62841-2-8 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers
• EN-62841-2-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
• EN-62841-3-1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
• EN-62841-3-10 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
• EN-62841-3-12 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017, modified)
• EN-62841-3-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
• EN-62841-3-6 - Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system
• EN-62841-3-9 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• EN-62841-4-2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, modified + COR1:2018)
• JIS-C-9605 - Portable Electric Drills