Document Center List of Standards on Wires Including Electric Rods, Busbars, Etc.
ICS Code 29.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A363 - Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
- ASTM-A368 - Standard Specification for Stainless Steel Wire Strand
- ASTM-A460 - Standard Specification for Copper-Clad Steel Wire Strand
- ASTM-A474 - Standard Specification for Aluminum-Coated Steel Wire Strand
- ASTM-A475 - Standard Specification for Zinc-Coated Steel Wire Strand
- ASTM-B1 - Standard Specification for Hard-Drawn Copper Wire
- ASTM-B1005 - Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
- ASTM-B105 - Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
- ASTM-B116 - Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
- ASTM-B189 - Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
- ASTM-B230 - Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes
- ASTM-B236 - Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
- ASTM-B236M - Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024)
- ASTM-B246 - Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
- ASTM-B258 - Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
- ASTM-B279 - Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- ASTM-B286 - Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
- ASTM-B314 - Specification for Aluminum 1350 Wire for Communication Cable (Withdrawn 1994)
- ASTM-B317 - Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
- ASTM-B324 - Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- ASTM-B33 - Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
- ASTM-B341M - Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) [Metric] (Withdrawn 1998)
- ASTM-B396 - Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes (Withdrawn 2004)
- ASTM-B398 - Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
- ASTM-B398M - Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes [Metric] (Withdrawn 1999)
- ASTM-B452 - Standard Specification for Copper-Clad Steel Wire for Electronic Application
- ASTM-B470 - Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
- ASTM-B48 - Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- ASTM-B498 - Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
- ASTM-B498M - Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)
- ASTM-B501 - Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
- ASTM-B502 - Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
- ASTM-B520 - Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
- ASTM-B559 - Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
- ASTM-B566 - Standard Specification for Copper-Clad Aluminum Wire
- ASTM-B606 - Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
- ASTM-B624 - Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
- ASTM-B800 - Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
- ASTM-B802M - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)
- ASTM-B835 - Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
- ASTM-B836 - Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
- ASTM-B847 - Specification for Tinned Hard-Drawn and Medium-Hard_Drawn Copper Wire for Electrical Purposes
- ASTM-B856 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
- ASTM-B857 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
- ASTM-B869 - Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
- ASTM-B902 - Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
- ASTM-B965 - Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
- ASTM-B976 - Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
- ASTM-B978 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
- ASTM-B99 - Standard Specification for Copper-Silicon Alloy Wire for General Applications
- ASTM-B99M - Standard Specification for Copper-Silicon Alloy Wire for General Applications [Metric] (Withdrawn 1996)
- ASTM-D1676 - Standard Test Methods for Film-Insulated Magnet Wire
- ASTM-D2307 - Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
- ASTM-D3032 - Standard Test Methods for Hookup Wire Insulation
- ASTM-D3353 - Standard Test Methods for Fibrous-Insulated Magnet Wire
- ASTM-D4881 - Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
- ASTM-D574 - Specification for Ozone-Resisting Insulation for Wire and Cable (Withdrawn 1983)
- ASTM-D7894 - Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
- ASTM-D7895 - Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
- ASTM-F16 - Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
- ASTM-F180 - Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
- ASTM-F205 - Standard Test Method for Measuring Diameter of Fine Wire by Weighing
- ASTM-F219 - Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps (Withdrawn 2023)
- ASTM-F269 - Standard Test Method for Sag of Tungsten Wire
- ASTM-F288 - Standard Specification for Tungsten Wire for Electron Devices and Lamps
- ASTM-F289 - Standard Specification for Molybdenum Wire and Rod for Electronic Applications
- ASTM-F290 - Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
- ASTM-F364 - Standard Specification for Molybdenum Flattened Wire for Electron Tubes
- ASTM-F487 - Standard Specification for Fine Aluminum–1 % Silicon Wire for Semiconductor Lead-Bonding (Withdrawn 2024)
- ASTM-F584 - Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire (Withdrawn 2015)
- ASTM-F638 - Standard Specification for Fine Aluminum-1% Magnesium Wire for Semiconductor Lead-Bonding
- ASTM-F72 - Standard Specification for Gold Wire for Semiconductor Lead Bonding
- ASTM-F73 - Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
BSI:
- BIP-2074 - Electrical plugs and wiring and world electricity supplies
- BS-1117-2 - Specification for bare fine resistance wire for precision electrical equipment
- BS-159 - Specification for high-voltage busbars and busbar connections
- BS-23 - Specification for copper and copper-cadmium trolley and contact wire for electric traction
- BS-2627 - Specification for wrought aluminium for electrical purposes. Wire
- BS-3467 - Method of test for temperature coefficient of resistance of alloy wire for precision resistors
- BS-4087 - Specification for copper-covered steel wire for telephone and telegraph purposes
- BS-4109 - Specification for copper for electrical purposes. Wire for general electrical purposes and for insulated cables and flexible cords
- BS-4393 - Specification for solderable tin or tin-lead coated wires for component terminations
- BS-4653-2 - Specification for paper covered copper conductors
- BS-4799-1 - Specification for varnish-bonded glass-lapped copper conductors
- BS-4801-2 - Specification for varnish-bonded glass-braided copper conductors
- BS-4927-1 - Specification for paper-, cotton-, silk- or rayon-covered copper conductors
- BS-6156 - Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single
- BS-6811-0 - Winding wires
- BS-6811-1.1 - Winding wires. Basic dimensions
- BS-6811-2-2.1 - Winding wires. Methods of test
- BS-6811-2-2.2 - Winding wires. Methods of test
- BS-6811-2-2.3 - Winding wires. Methods of test. Mechanical properties
- BS-6811-2-2.6 - Winding wires. Methods of test
- BS-6811-2.3 - Winding wires. Methods of test. Mechanical properties
- BS-6926 - Specification for copper for electrical purposes: high conductivity copper wire rod
- BS-EN-13602 - Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
- BS-EN-13603-TC - Tracked Changes. Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- BS-EN-13605 - Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
- BS-EN-50182 - Conductors for overhead lines. Round wire concentric lay stranded conductors
- BS-EN-50189 - Conductors for overhead lines. Zinc coated steel wires
- BS-EN-60172 - Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- BS-EN-60172-TC - Tracked Changes. Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- BS-EN-60264-5-2 - Packaging of winding wires. Cylindrical barrelled delivery spools with conical flanges
- BS-EN-60317-0-1 - Specifications for particular types of winding wires
- BS-EN-60317-0-10 - Specifications for particular types of winding wires
- BS-EN-60317-0-2 - Specifications for particular types of winding wires
- BS-EN-60317-0-3 - Specifications for particular types of winding wires
- BS-EN-60317-0-4 - Specifications for particular types of winding wires
- BS-EN-60317-0-5 - Specifications for particular types of winding wires
- BS-EN-60317-0-6 - Specifications for particular types of winding wires
- BS-EN-60317-0-7 - Specifications for particular types of winding wires
- BS-EN-60317-0-8 - Specifications for particular types of winding wires
- BS-EN-60317-0-9 - Specifications for particular types of winding wires
- BS-EN-60317-11 - Part 11: Bunched Solderable Polyurethane Enamelled Round Copper Wires, Class 130, With
- BS-EN-60317-12 - Specifications for particular types of winding wires
- BS-EN-60317-13 - Specifications for particular types of winding wires
- BS-EN-60317-14 - Polyvinyl Acetal Enamelled Round Aluminium Wire, Class 105Formerly Bs 6811 : Part 5 :
- BS-EN-60317-15 - Specifications for particular types of winding wires
- BS-EN-60317-16 - Polyester Enamelled Rectangular Copper Wire, Class 155Formerly Bs 6811 : Part 4 : Sect
- BS-EN-60317-17 - Specifications for particular types of winding wires
- BS-EN-60317-18 - Specifications for particular types of winding wires
- BS-EN-60317-19 - Specifications for particular types of winding wires
- BS-EN-60317-2 - Specifications for particular types of winding wires
- BS-EN-60317-20 - Specifications for particular types of winding wires
- BS-EN-60317-21 - Specifications for particular types of winding wires
- BS-EN-60317-22 - Specifications for particular types of winding wires
- BS-EN-60317-23 - Specifications for particular types of winding wires
- BS-EN-60317-24 - Specifications for particular types of winding wires Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180
- BS-EN-60317-25 - Specifications for particular types of winding wires
- BS-EN-60317-27 - Specifications for particular types of winding wires
- BS-EN-60317-28 - Specifications for particular types of winding wires
- BS-EN-60317-29 - Specifications for particular types of winding wires
- BS-EN-60317-30 - Specifications for particular types of winding wires
- BS-EN-60317-31 - Specifications for particular types of winding wires
- BS-EN-60317-32 - Specifications for particular types of winding wires
- BS-EN-60317-33 - Specifications for particular types of winding wires
- BS-EN-60317-34 - Specifications for particular types of winding wires
- BS-EN-60317-35 - Specifications for particular types of winding wires
- BS-EN-60317-36 - Specifications for particular types of winding wires
- BS-EN-60317-37 - Specifications for particular types of winding wires
- BS-EN-60317-38 - Specifications for particular types of winding wires
- BS-EN-60317-39 - Specifications for particular types of winding wires
- BS-EN-60317-4 - Specifications for particular types of winding wires
- BS-EN-60317-40 - Specifications for particular types of winding wires
- BS-EN-60317-42 - Specifications for particular types of winding wires
- BS-EN-60317-43 - Specifications for particular types of winding wires
- BS-EN-60317-44 - Specifications for particular types of winding wires
- BS-EN-60317-45 - Specifications for particular types of winding wires
- BS-EN-60317-46 - Specifications for particular types of winding wires
- BS-EN-60317-47 - Specifications for particular types of winding wires
- BS-EN-60317-48 - Specifications for particular types of winding wires
- BS-EN-60317-49 - Specifications for particular types of winding wires
- BS-EN-60317-50 - Specifications for particular types of winding wires
- BS-EN-60317-51 - Specifications for particular types of winding wires
- BS-EN-60317-52 - Specifications for particular types of winding wires
- BS-EN-60317-53 - Specifications for particular types of winding wires
- BS-EN-60317-55 - Specifications for particular types of winding wires
- BS-EN-60317-56 - Specifications for particular types of winding wires
- BS-EN-60317-59 - Specifications for particular types of winding wires
- BS-EN-60317-60 - Specifications for particular types of winding wires
- BS-EN-60317-61 - Specifications for particular types of winding wires
- BS-EN-60317-62 - Specifications for particular types of winding wires
- BS-EN-60317-67 - Specifications for particular types of winding wires
- BS-EN-60317-68 - Specifications for particular types of winding wires
- BS-EN-60317-68-TC - Specifications for particular types of winding wires
- BS-EN-60317-69 - Specifications for particular types of winding wires
- BS-EN-60317-70 - Specifications for particular types of winding wires
- BS-EN-60317-71 - Specifications for particular types of winding wires
- BS-EN-60317-72 - Specifications for particular types of winding wires
- BS-EN-60317-8 - Specifications for particular types of winding wires
- BS-EN-60851-1 - Winding wires. Test methods
- BS-EN-60851-2 - Winding wires. Test methods
- BS-EN-60851-3 - Winding wires. Test methods
- BS-EN-60851-4 - Winding wires. Test methods
- BS-EN-60851-4-TC - Tracked Changes. Winding wires. Test methods
- BS-EN-60851-5 - Winding wires. Test methods
- BS-EN-60851-6 - Winding wires. Test methods
- BS-EN-61232 - Aluminium-clad steel wires for electrical purposes
- BS-EN-61534-1 - Powertrack systems
- BS-EN-61534-21 - Powertrack systems
- BS-EN-61534-22 - Powertrack systems
- BS-EN-62004 - Thermal-resistant aluminium alloy wire for overhead line conductor
- BS-EN-62420 - Concentric lay stranded overhead electrical conductors containing one or more gap(s)
- BS-EN-IEC-60172 - Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- BS-EN-IEC-60317-0-2 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-0-4 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-0-6 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-0-8 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-12 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-17 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-18 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-25 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-27-1 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-27-2 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-27-3 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-27-4 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-60-1 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-60-2 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-61 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-62 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-70-1 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-70-2 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-71 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-72 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-73 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-74 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-80 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-82 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-84 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-89 - Specifications for particular types of winding wires
- BS-EN-IEC-60317-93 - Specifications for particular types of winding wires
- BS-EN-IEC-60601-2-22 - Medical electrical equipment
- BS-EN-IEC-60851-1 - Winding wires. Test methods
- BS-EN-IEC-61386-21 - Conduit systems for cable management
- BS-EN-IEC-62641 - Conductors for overhead lines. Aluminium and aluminium alloy wires for concentric lay stranded conductors
- BS-IEC-60264-1 - Packaging of winding wires. Containers for round winding wires
- BS-IEC-60264-2-1 - Packaging for winding wires. Cylindrical barrelled delivery spools
- BS-IEC-60317-4 - Specifications for particular types of winding wires
- PAS-6010 - Additive Manufacturing. Wire for directed energy deposition (DED) processes in additive manufacturing. Specification
- PAS-6012 - Additive manufacturing. Wire arc. Guide
- PD-6541 - Guide To Selection and Erection of Electrical Equipment. Wiring Systems. Limitation Of
- PD-6590 - Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations
- PD-CLC-50473 - Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations
- PD-CLC-50479 - Electrical installation guide. Selection and erection of electrical equipment. Wiring systems. Limitation of temperature rise of connecting interfaces
IEC:
- IEC-114 - Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
- IEC-121 - Recommendation for commercial annealed aluminium electrical conductor wire
- IEC-1232 - Aluminium-clad steel wires for electrical purposes
- IEC-172 - Test procedure for the determination of the temperature index of enamelled winding wires
- IEC-197 - High-voltage connecting wire with flame retarding insulation for use in television receivers
- IEC-246 - Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers
- IEC-264-4-2 - Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools
- IEC-317-26 - Specifications for particular types of winding wires. Part 26: Polyamide-imide enamelled round copper wire, class 200
- IEC-317-29 - Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
- IEC-317-39 - Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-317-40 - Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60172 - Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- IEC-60172-1 - Amendment No. 1
- IEC-60172/A2 - Amendment 2 - Test procedure for the determination of the temperature index of enamelled winding wires
- IEC-60172-RL - Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- IEC-60189-1 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
- IEC-60189-2 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations
- IEC-60189-3 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
- IEC-60264-1-1 - Amendment 1 - Packaging of winding wires - Part 1: Containers for round winding wires
- IEC-60264-2-1-1 - Amendment 1 - Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions
- IEC-60264-2-2-1 - Amendment 1 - Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material
- IEC-60264-2-3-1 - Amendment 1 - Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material
- IEC-60264-3-1 - Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions
- IEC-60264-3-1-1 - Amendment 1 - Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions
- IEC-60264-3-2 - Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials
- IEC-60264-3-3-1 - Amendment 1 - Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material
- IEC-60264-3-4 - Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools
- IEC-60264-3-5 - Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material
- IEC-60264-4-1 - Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
- IEC-60264-4-1-1 - Amendment 1 - Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
- IEC-60264-4-2-1 - Amendment 1 - Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools
- IEC-60264-5-1 - Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions
- IEC-60264-5-1-1 - Amendment 1 - Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions
- IEC-60264-5-2 - Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material
- IEC-60317-0-1 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
- IEC-60317-0-10 - Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
- IEC-60317-0-1-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 0-1: General
- IEC-60317-0-1-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
- IEC-60317-0-2 - Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
- IEC-60317-0-2-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 0-2: General
- IEC-60317-0-2-RL - Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
- IEC-60317-0-3 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
- IEC-60317-0-3-1 - Amendment 1 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminum wire
- IEC-60317-0-3-AM2 - Amendment 2 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
- IEC-60317-0-4 - Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
- IEC-60317-0-4-1 - Amendment 1
- IEC-60317-0-4-2 - Amendment 2 - Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire
- IEC-60317-0-4-RL - Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
- IEC-60317-0-5 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire
- IEC-60317-0-6 - Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
- IEC-60317-0-6-1 - Amendment 1 - Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
- IEC-60317-0-6-RL - Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
- IEC-60317-0-7 - Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
- IEC-60317-0-8 - Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire
- IEC-60317-0-8-RL - Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire
- IEC-60317-0-9 - Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
- IEC-60317-1 - Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105
- IEC-60317-11 - Part 11: Bunched Solderable Polyurethane Enamelled Round Copper Wires, Class 130, With Sil
- IEC-60317-11-1 - Amendment 1: Specifications for Particular Types of Winding Wires - Part 11: Bunched
- IEC-60317-12 - Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
- IEC-60317-12-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 12: Polyviny
- IEC-60317-12-RL - Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
- IEC-60317-13 - Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
- IEC-60317-15 - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
- IEC-60317-15/A1 - Amendment 1 - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
- IEC-60317-16-2 - Amendment 2 for IEC-317-16, Specifications for Particular Types of Winding Wires - Par
- IEC-60317-17 - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
- IEC-60317-17-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 17: Polyviny
- IEC-60317-17-RL - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
- IEC-60317-18 - Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
- IEC-60317-18/A1 - Amendment 1 - Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
- IEC-60317-18-RL - Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
- IEC-60317-19 - Part 19: Solderable Polyurethane Enamelled Round Copper Wire, Overcoated With Polyamide, C
- IEC-60317-19-AM1 - Amendment 1 for IEC-317-19, Specifications for Particular Types of Winding Wires
- IEC-60317-2 - Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
- IEC-60317-20 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
- IEC-60317-20-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
- IEC-60317-21 - Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
- IEC-60317-21-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
- IEC-60317-22 - Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
- IEC-60317-22/A1 - Amendment 1 - Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
- IEC-60317-23 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
- IEC-60317-23-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
- IEC-60317-25 - Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
- IEC-60317-25-RL - Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
- IEC-60317-26-1 - Amendment No. 1
- IEC-60317-26-AM2 - Amendment 2 - Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200
- IEC-60317-27 - Specifications for particular types of winding wires Part 27 Paper tape covered rectangular copper wire
- IEC-60317-27-1 - Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
- IEC-60317-27-2 - Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
- IEC-60317-27-3 - Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
- IEC-60317-27-4 - Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
- IEC-60317-28 - Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
- IEC-60317-28-1 - Amendment 1: Specifications for Particular Types of Winding Wires, Part 28: Polyester
- IEC-60317-28-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 28: Polyeste
- IEC-60317-29-1 - Amendment No. 1
- IEC-60317-29-AM2 - Amendment 2 - Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
- IEC-60317-2-AM1 - Amendment 1 for IEC-317-2, Specifications for Particular Types of Winding Wires
- IEC-60317-2-RL - Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
- IEC-60317-3 - Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
- IEC-60317-30-1 - Amendment 1, Part 3: Polyester Enamelled Round Copper Wire, Class 155, Specifications
- IEC-60317-30-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 30: Polymide
- IEC-60317-31 - Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-60317-31-1 - Amendment No. 1
- IEC-60317-31-2 - Amendment 2 - Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-60317-32 - Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
- IEC-60317-32-1 - Amendment No. 1
- IEC-60317-32-2 - Amendment 2 - Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
- IEC-60317-33 - Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60317-33-1 - Amendment No. 1
- IEC-60317-33-2 - Amendment 2 - Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60317-34 - Part 34: Polyester Enamelled Round Copper Wire, Class 130 l,Specifications for Particular
- IEC-60317-35 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
- IEC-60317-35-1 - Amendment 1: Specifications for Particular Types of Winding Wires - Part 35: Solderab
- IEC-60317-35-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
- IEC-60317-36 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
- IEC-60317-36-1 - Amendment 1: Specifications for Particular Types of Winding Wires - Part 36: Solderab
- IEC-60317-36-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
- IEC-60317-37 - Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
- IEC-60317-37-1 - Amendment 1: Specifications for Particular Types of Winding Wires - Part 37: Polyeste
- IEC-60317-38 - Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
- IEC-60317-38-1 - Amendment 1: Specifications for Particular Types of Winding Wires - Part 38: Polyeste
- IEC-60317-39 - Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-60317-39-1 - Amendment No. 1
- IEC-60317-39-2 - Amendment 2 - Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-60317-3-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
- IEC-60317-4 - Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130
- IEC-60317-40 - Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60317-40-1 - Amendment No. 1
- IEC-60317-40-2 - Amendment 2 - Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60317-42 - Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200
- IEC-60317-4-2 - Amendment 2
- IEC-60317-42/A1 - Amendment 1 - Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200
- IEC-60317-43 - Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
- IEC-60317-43/A1 - Amendment 1 - Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
- IEC-60317-44 - Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
- IEC-60317-44/A1 - Amendment 1 - Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
- IEC-60317-46 - Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
- IEC-60317-47 - Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
- IEC-60317-48 - Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
- IEC-60317-49 - Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
- IEC-60317-50 - Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
- IEC-60317-51 - Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
- IEC-60317-52 - Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
- IEC-60317-53 - Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
- IEC-60317-54 - Part 54: Polyester Enamelled Round Copper Wire, Class 155l,Specifications for Particular
- IEC-60317-55 - Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
- IEC-60317-55-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
- IEC-60317-56 - Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180
- IEC-60317-57 - Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled round copper wire, class 220
- IEC-60317-58 - Specifications for particular types of winding wires - Part 58: Polyamide-imide enameled rectangular copper wire, class 220
- IEC-60317-59 - Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
- IEC-60317-60 - Specifications for particular types of winding wires - Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155
- IEC-60317-60-1 - Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155
- IEC-60317-60-2 - Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
- IEC-60317-61 - Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-60317-61-RL - Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- IEC-60317-62 - Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60317-62-RL - Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- IEC-60317-67 - Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105
- IEC-60317-67-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105
- IEC-60317-68 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120
- IEC-60317-68-AM1 - Amendment 1 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120
- IEC-60317-69 - Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220
- IEC-60317-7 - Part 7: Polyimide Enamelled Round Copper Wire, Class 220, Specifications for Particula
- IEC-60317-70 - Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
- IEC-60317-70-1 - Specifications for particular types of winding wires - Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or enamelled round copper wire, temperature index 155
- IEC-60317-70-2 - Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155
- IEC-60317-71 - Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
- IEC-60317-71-RL - Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
- IEC-60317-72 - Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200
- IEC-60317-72-RL - Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200
- IEC-60317-73 - Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200
- IEC-60317-74 - Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180
- IEC-60317-8 - Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
- IEC-60317-80 - Specifications for particular types of winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer
- IEC-60317-82 - Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200
- IEC-60317-8-2 - Amendment 2: Specifications for Particular Types of Winding Wires - Part 8: Polyester
- IEC-60317-84 - Specifications for particular types of winding wires - Part 84: Polyesterimide enamelled round copper wire, class 200
- IEC-60317-89 - Specifications for particular types of winding wires - Part 89: Polyesterimide enamelled round aluminum wire, class 200
- IEC-60317-93 - Specifications for particular types of winding wires . Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220
- IEC-60851-1 - Winding wires - Test methods - Part 1: General
- IEC-60851-1-1 - Amendment 1 - Winding wires - Test methods - Part 1: General
- IEC-60851-1-2 - Amendment 2 - Winding wires - Test methods - Part 1: General
- IEC-60851-2 - Winding wires - Test methods - Part 2: Determination of dimensions
- IEC-60851-2-1 - Amendment 1 - Winding wires - Test methods - Part 2: Determination of dimensions
- IEC-60851-2-AM 2 - Amendment 2 - Winding wires - Test methods - Part 2: Determination of dimensions
- IEC-60851-3 - Winding wires - Test methods - Part 3: Mechanical properties
- IEC-60851-3-1 - Amendment 1 - Winding wires - Test methods - Part 3: Mechanical properties
- IEC-60851-3-AM2 - Amendment 2 - Winding wires - Test methods - Part 3: Mechanical properties
- IEC-60851-3-AM 2 - Amendment 2: Winding Wires - Test Methods - Part 3: Mechanical Properties
- IEC-60851-3-RL - Winding wires - Test methods - Part 3: Mechanical properties
- IEC-60851-4 - Winding wires - Test methods - Part 4: Chemical properties
- IEC-60851-4-1 - Amendment No. 1
- IEC-60851-4-2 - Amendment 2 - Winding wires - Test methods - Part 4: Chemical properties
- IEC-60851-5 - Winding wires - Test methods - Part 5: Electrical properties
- IEC-60851-5-2 - Amendment 2: Winding Wires - Test Methods, Part 5: Electrical Properties
- IEC-60851-5-AM1 - Amendment 1 - Winding wires - Test methods - Part 5: Electrical properties
- IEC-60851-5-AM2 - Amendment 2 - Winding wires - Test methods - Part 5: Electrical properties
- IEC-60851-6 - Winding wires - Test methods - Part 6: Thermal properties
- IEC-60851-6-2 - Amendment 2: Winding Wires - Test Methods - Part 6: Thermalproperties
- IEC-61534-1 - Powertrack systems - Part 1: General requirements
- IEC-61534-1-AM1 - Amendment 1 - Powertrack systems - Part 1: General requirements
- IEC-61534-1-AM2 - Amendment 2 - Powertrack systems - Part 1: General requirements
- IEC-61534-21 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
- IEC-61534-21-AM1 - Amendment 1 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
- IEC-61534-22 - Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
- IEC-61534-22-AM1 - Amendment 1 - Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
- IEC-62420 - Concentric lay stranded overhead electrical conductors containing one or more gap(s)
- IEC-851-1 - Methods of test for winding wires - Part 1: General
- IEC-979 - Wires for wire wrapping applications
- IEC/PAS-62338 - Screened Balanced Cables - Coupling Attenuation Measurement,Triaxial Method
Other SDOs:
- EN-60172 - Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- EN-60264-4-1 - Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
- EN-60317-0-1 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
- EN-60317-0-10 - Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
- EN-60317-0-2 - Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
- EN-60317-0-3 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
- EN-60317-0-4 - Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
- EN-60317-0-5 - Specifications for Particular Types of Winding Wires, General Requirements, Glass-Fibr
- EN-60317-0-6 - General Requirements - Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamell
- EN-60317-0-7 - Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
- EN-60317-0-8 - Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
- EN-60317-0-9 - Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
- EN-60317-12 - Part 12: Polyvinyl Acetal Enamelled Round Copper Wire, Classnyl Acetal Enamelled Round
- EN-60317-13 - Specifications for Particular Types of Winding Wires, Polyester or Polyesterimide Over
- EN-60317-15 - Part 15: Polyesterimide Enamelled Round Aluminium Wire, Class 180, Specifications For
- EN-60317-17 - Part 17: Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 105, Specifications
- EN-60317-2 - Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
- EN-60317-20 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
- EN-60317-21 - Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
- EN-60317-22 - Part 22: Polyester or Polyesterimide Enamelled Round Copper Wire Overcoated With Poly
- EN-60317-23 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
- EN-60317-24 - Specifications for Particular Types of Winding Wires, Polyester or Polyesterimide Enam
- EN-60317-25 - Part 25: Polyester or Polyesterimide Overcoated With POLYAMIDE-Imide Enamelled Round A
- EN-60317-27 - Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
- EN-60317-28 - Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
- EN-60317-30 - Specifications for Particular Types of Winding Wires, Polyimide Enamelled Rectangular
- EN-60317-31 - Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- EN-60317-32 - Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
- EN-60317-33 - Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- EN-60317-35 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
- EN-60317-36 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
- EN-60317-37 - Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
- EN-60317-38 - Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
- EN-60317-39 - Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 180
- EN-60317-40 - Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200
- EN-60317-42 - Part 42: Polyester-Amide-Imide Enamelled Round Copper Wire, Class 200, Specifications
- EN-60317-43 - Part 43: Aromatic Polyimide Tape Wrapped Round Copper Wire, Class 240, Specifications
- EN-60317-44 - Part 44: Aromatic Polyimide Tape Wrapped Wrapped Rectangular Copper Wire, Class 240, S
- EN-60317-46 - Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
- EN-60317-47 - Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
- EN-60317-48 - Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
- EN-60317-49 - Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
- EN-60317-50 - Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
- EN-60317-51 - Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
- EN-60317-52 - Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
- EN-60317-53 - Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
- EN-60317-55 - Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180
- EN-60317-56 - Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180
- EN-60317-57 - Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220
- EN-60317-58 - Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
- EN-60317-59 - Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240
- EN-60317-60 - Specifications for particular types of winding wires - Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155
- EN-60317-61 - Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
- EN-60317-62 - Specifications for particular types of winding wires - Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- EN-60317-67 - Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105
- EN-60317-68 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120
- EN-60317-69 - Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220
- EN-60317-70 - Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
- EN-60317-71 - Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
- EN-60317-72 - Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
- EN-60317-8 - Part 8: Polyesterimide Enamelled Round Copper Wire, Class 180, Specifications for Part
- EN-60851-1 - Part 1: General, Winding Wires - Test Methods
- EN-60851-2 - Winding wires - Test methods - Part 2: Determination of dimensions
- EN-60851-3 - Winding wires - Test methods - Part 3: Mechanical properties
- EN-60851-4 - Winding wires - Test methods - Part 4: Chemical properties
- EN-60851-5 - Winding wires - Test methods - Part 5: Electrical properties
- EN-60851-6 - Winding wires - Test methods - Part 6: Thermal properties
- EN-61534-1 - Powertrack systems - Part 1: General requirements
- EN-61534-21 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
- EN-61534-22 - Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
- EN-62004 - Thermal-Resistant Aluminium Alloy Wire for Overhead Line Conductor
- EN-62420 - Concentric Lay Stranded Overhead Electrical Conductors Containing One or More Gap(S)
- EN-IEC-60317-73 - Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200
- EN-IEC-60317-74 - Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180
- JIS-C-3202 - Enamelled winding wires
- JIS-C-3216-3 - Winding wires -- Test methods -- Part 3: Mechanical properties
- JIS-C-3216-4 - Winding wires -- Test methods -- Part 4: Chemical properties
- JIS-C-3216-5 - Winding wires -- Test methods -- Part 5: Electrical properties
- JIS-H-4541 - Dumet wires
- SS-EN-60851-5 - Winding wires - Test methods - Part 5: Electrical properties
- UNE-EN-60317-0-9 - Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire