Document Center is acquired by Nimonik

Document Center List of Standards on Low Voltage Switchgear And Controlgear Including Switchgear And Controlgear Assemblies

ICS Code 29.130.20

Return to ICS Index.

Up to Level 2:

• 29.130 (Switchgear and controlgear)

The following documents are a part of this series:

BSI:

• BS-4752-1 - Specification for switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.
• BS-5271 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Methods for measuring the operating distance and operating frequency
• BS-5405 - Code of practice for the maintenance of electrical switchgear for voltages up to and including 145 kV
• BS-5419 - Specification for air-break switches, air-break disconnectors, air-break switch disconnectors and fuse-combination units for voltages up to and including 1000 V a.c. and 1200 V d.c.
• BS-5424-2 - Low-voltage controlgear
• BS-5424-3 - Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.
• BS-5472 - Specification for low voltage switchgear and controlgear for industrial use. Terminal marking and distinctive number. General rules
• BS-5486-11 - Specification for Particular Requirements of Fuseboards
• BS-5486-2 - Specification for factory-built assemblies of switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.
• BS-5529 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 3 or 4 terminals
• BS-5582 - Specification for low voltage switchgear and controlgear for industrial use. Terminal marking and distinctive number for auxiliary contacts of particular contactors
• BS-5584 - Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. Top hat rails 35 mm wide for snap-on mounting of equipment
• BS-5585 - Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. Top hat rails 75 mm wide for snap-on mounting of equipment
• BS-5683 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for direct current, 3 or 4 terminals
• BS-5684 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for direct current, 3 or 4 terminals
• BS-5824 - Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. C-profile and accessories for the mounting of equipment
• BS-5825 - Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. G-profile for the fixing of terminal blocks
• BS-6120 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for alternating current, 2 terminals
• BS-6122 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for alternating current, 2 terminals
• BS-6123 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for alternating current, 2 terminals
• BS-6226 - Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Definitions, classification and designation
• BS-6227 - Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 2 terminals
• BS-6272 - Specification for low voltage switchgear and controlgear for industrial use. Terminal marking. Terminals for external associated electronic circuit components and contacts
• BS-6273 - Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. Top hat rails, 15 mm wide for the fixing of terminal blocks
• BS-6423 - Code of practice for maintenance of low-voltage switchgear and controlgear
• BS-6519 - Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Identifications of connections
• BS-6732 - Specification for low-voltage switchgear and controlgear for industrial use. Size numbers and gauges for flat connections
• BS-787-1 - Specification for mining type flameproof gate-end boxes
• BS-787-2 - Specification for mining type flameproof gate-end boxes
• BS-787-3 - Specification for mining type flameproof gate-end boxes
• BS-787-4 - Specification for mining type flameproof gate-end boxes
• BS-EN-50041 - Low-voltage switchgear and controlgear. Control switches. Position switches 42,5 x 80. Dimensions and characteristics
• BS-EN-50047 - Low-voltage switchgear and controlgear. Control switches. Position switches 30 55. Dimensions and characteristics
• BS-EN-50152-3-1 - Railway applications. Fixed installations. Particular requirements for a.c. switchgear
• BS-EN-50152-3-1-TC - Tracked Changes. Railway applications. Fixed installations. Particular requirements for a.c. switchgear
• BS-EN-50152-3-2 - Railway applications. Fixed installations. Particular requirements for a.c. switchgear
• BS-EN-50152-3-2-TC - Tracked Changes. Railway applications. Fixed installations. Particular requirements for a.c. switchgear
• BS-EN-50152-3-3 - Railway applications. Fixed installations. Particular requirements for a.c. switchgear
• BS-EN-50152-3-3-TC - Tracked Changes. Railway applications. Fixed installations. Particular requirements for a.c. switchgear
• BS-EN-50274 - Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
• BS-EN-50295 - Low-voltage switchgear and controlgear. Controller and device interface systems. Actuator sensor interface (AS-i)
• BS-EN-50300 - Low-Voltage Switchgear & Controlgear Assemblies, General Requirements for Low-Voltage
• BS-EN-50325-1 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
• BS-EN-50325-2 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. DeviceNet
• BS-EN-50325-4 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces
• BS-EN-60439-1 - Low-voltage switchgear and controlgear assemblies. Type-tested and partially type-tested assemblies
• BS-EN-60439-2 - Low voltage switchgear and controlgear assemblies. Particular requirements for busbar trunking systems (busways)
• BS-EN-60439-3 - Low-voltage switchgear and controlgear assemblies. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use. Distribution boards
• BS-EN-60439-4 - Low-voltage switchgear and controlgear assemblies
• BS-EN-60439-5 - Low-voltage switchgear and controlgear assemblies
• BS-EN-60715 - Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
• BS-EN-60947-1 - Low-voltage switchgear and controlgear
• BS-EN-60947-2 - Low-voltage switchgear and controlgear
• BS-EN-60947-2-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-60947-3 - Low-voltage switchgear and controlgear
• BS-EN-60947-4 - Low-voltage switchgear and controlgear
• BS-EN-60947-4-1 - Low-voltage switchgear and controlgear
• BS-EN-60947-4-2 - Low-voltage switchgear and controlgear
• BS-EN-60947-4-3 - Low-voltage switchgear and controlgear
• BS-EN-60947-5-1 - Low-voltage switchgear and controlgear
• BS-EN-60947-5-1-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-60947-5-2 - Low-voltage switchgear and controlgear
• BS-EN-60947-5-3 - Low-voltage switchgear and controlgear
• BS-EN-60947-5-5 - Low-voltage switchgear and controlgear
• BS-EN-60947-5-6 - Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements
• BS-EN-60947-5-8 - Low-voltage switchgear and controlgear
• BS-EN-60947-5-9 - Low-voltage switchgear and controlgear
• BS-EN-60947-6-1 - Low-voltage switchgear and controlgear
• BS-EN-60947-6-2 - Low-voltage switchgear and controlgear
• BS-EN-60947-7-1 - Low-voltage switchgear and controlgear
• BS-EN-60947-7-2 - Low-voltage switchgear and controlgear
• BS-EN-60947-7-3 - Low-voltage switchgear and controlgear
• BS-EN-60947-7-4 - Low-voltage switchgear and controlgear
• BS-EN-60947-8 - Low-voltage switchgear and controlgear
• BS-EN-60999-2 - Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units
• BS-EN-61095 - Electromechanical contactors for household and similar purposes
• BS-EN-61439-1 - Low-voltage switchgear and controlgear assemblies
• BS-EN-61439-2 - Low-voltage switchgear and controlgear assemblies
• BS-EN-61439-3 - Low-voltage switchgear and controlgear assemblies
• BS-EN-61439-4 - Low-voltage switchgear and controlgear assemblies
• BS-EN-61439-5 - Low-voltage switchgear and controlgear assemblies
• BS-EN-61439-6 - Low-voltage switchgear and controlgear assemblies
• BS-EN-61915-1 - Low-voltage switchgear and controlgear. Device profiles for networked industrial devices
• BS-EN-61915-2 - Low-voltage switchgear and controlgear. Device profiles for networked industrial devices
• BS-EN-62026-1 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
• BS-EN-62026-2 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
• BS-EN-62026-3 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
• BS-EN-62026-3-TC - Tracked Changes. Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
• BS-EN-62026-7 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
• BS-EN-62208 - Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
• BS-EN-62626-1 - Low-voltage switchgear and controlgear enclosed equipment
• BS-EN-62683 - Low-voltage switchgear and controlgear. Product data and properties for information exchange
• BS-EN-62683-1 - Low-voltage switchgear and controlgear. Product data and properties for information exchange
• BS-EN-IEC-60947-1 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-1-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-1-TC EX COMM - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-3 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-3-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-4-1 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-4-2 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-5-2 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-5-8 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-5-8-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-6-1 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-6-1-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-6-2 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-7-4 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-8 - Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-8-TC - Tracked Changes. Low-voltage switchgear and controlgear
• BS-EN-IEC-60947-9-1 - Low-voltage switchgear and controlgear
• BS-EN-IEC-61439-5 - Low-voltage switchgear and controlgear assemblies
• BS-EN-IEC-61439-5-TC - Tracked Changes. Low-voltage switchgear and controlgear assemblies
• BS-EN-IEC-61439-7 - Low-voltage switchgear and controlgear assemblies
• BS-EN-IEC-61439-7-TC - Tracked Changes. Low-voltage switchgear and controlgear assemblies
• BS-EN-IEC-62026-1 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs)
• BS-EN-IEC-62208 - Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
• BS-EN-IEC-62208-TC - Tracked Changes. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
• BS-EN-IEC-63119-1 - Information exchange for electric vehicle charging roaming service
• DD-IEC-62091 - Low-voltage switchgear and controlgear. Controllers for drivers of stationary fire pumps
• DD-IEC/PAS-62026-7 - Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). CompoNet
• PD-CLC-IEC-63201 - Low-voltage switchgear and controlgear. Guidance for the development of embedded software
• PD-IEC-60890 - A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
• PD-IEC-60947-7-5 - Low-voltage switchgear and controlgear
• PD-IEC-61439-0 - Low-voltage switchgear and controlgear assemblies
• PD-IEC-61439-0-TC - Tracked Changes. Low-voltage switchgear and controlgear assemblies
• PD-IEC-61641 - Enclosed low-voltage switchgear and controlgear assemblies. Guide for testing under conditions of arcing due to internal fault
• PD-IEC-61912 - Application of the Short-Circuit Ratings of Low-Voltage Switchgear & Controlgear
• PD-IEC-61912-1 - Low-voltage switchgear and controlgear. Overcurrent protective devices
• PD-IEC-63054 - Low-voltage switchgear and controlgear. Fire risk analysis and risk reduction measures
• PD-IEC-63058 - Switchgear and controlgear and their assemblies for low voltage. Environmental aspects
• PD-IEC-63107 - Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC assemblies) according to IEC 61439-2
• PD-IEC-63196 - Switchgear and controlgear and their assemblies for low voltage. Energy efficiency
• PD-IEC-63201 - Low-voltage switchgear and controlgear. Guidance for the development of embedded software
• PD-IEC-63208 - Low-voltage switchgear and controlgear. Security aspects
• PD-IEC-63216 - Low-voltage switchgear and controlgear. Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies
• PD-IEC-63434 - Low voltage switchgear and controlgear. Partial discharge voltages and PD-level in low voltage switchgear and controlgear

IEC:

• IEC-60439-1 - Part 1: Type-Tested and Partially Type-Tested Assemblies, Low-Voltage Switchgear and Controlg
• IEC-60439-1-1 - Amendment 1: Low-Voltage Switchgear & Controlgear Assemblies- Part 1: Type-Tested & Parti
• IEC-60439-2 - Part 2: Particular Requirements for Busbar Trunking Systems (Busways), Low-Voltage Sw
• IEC-60439-2-1 - Amendment 1: Low-Voltage Switchgear & Controlgear Assemblie - Part 2: Particular Requ
• IEC-60439-3 - Part 3: Particular Requirements for Low-Voltage Switchgear &Controlgear Assemblies Intend
• IEC-60439-4 - Part 4: Particular Requirements for Assemblies for Construction Sites (ACS), Low-Voltage S
• IEC-60439-5 - Part 5: Particular Requirements for Assemblies for Power Distribution in Public Networ
• IEC-60439 SERIES - Low-Voltage Switchgear and Controlgear Assemblies - All Parts - No Longer Available
• IEC-60715 - Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
• IEC-60890 - A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
• IEC-60947-1 - Low-voltage switchgear and controlgear - Part 1: General rules
• IEC-60947-1-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 1: General rules
• IEC-60947-1-2 - Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules
• IEC-60947-2 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
• IEC-60947-2-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
• IEC-60947-2-2 - Amendment 2 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
• IEC-60947-2-AM1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
• IEC-60947-2-RL - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
• IEC-60947-3 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
• IEC-60947-3-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
• IEC-60947-3-2 - Amendment 2 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
• IEC-60947-4-1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
• IEC-60947-4-1-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
• IEC-60947-4-1-2 - Amendment 2: Low-Voltage Switchgear & Controlgear - Part 4-1: Contactors & Motor-Start
• IEC-60947-4-1-RL - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
• IEC-60947-4-2 - Low-voltage switchgear and controlgear . Part 4-2: Contactors and motor-starters . Semiconductor motor controllers, starters and soft-starters
• IEC-60947-4-2-2 - Amendment 2: Low-Voltage Switchgear & Controlgear, Part 4-2: Contactors & Motor-Starte
• IEC-60947-4-3 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads
• IEC-60947-4-3-1 - Amendment 1: Low-Voltage Switchgear & Controlgear - Part 4-3: Contactors & Motor-Start
• IEC-60947-4-3-AM2 - Amendment 2, Part 4-3: Contactors & Motor-Starters - Ac Semiconductor Controllers & Co
• IEC-60947-5-1 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
• IEC-60947-5-1-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
• IEC-60947-5-1-RL - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
• IEC-60947-5-2 - Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
• IEC-60947-5-2-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
• IEC-60947-5-3 - Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
• IEC-60947-5-4 - Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
• IEC-60947-5-4-AM1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
• IEC-60947-5-5 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
• IEC-60947-5-5-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
• IEC-60947-5-5-AM2 - Amendment 2 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
• IEC-60947-5-6 - Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
• IEC-60947-5-7 - Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Proximity devices with analogue output
• IEC-60947-5-8 - Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
• IEC-60947-5-8-RL - Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
• IEC-60947-5-9 - Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches
• IEC-60947-6-1 - Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
• IEC-60947-6-1-AM1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
• IEC-60947-6-2 - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
• IEC-60947-6-2-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
• IEC-60947-7-1 - Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
• IEC-60947-7-2 - Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
• IEC-60947-7-3 - Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
• IEC-60947-7-4 - Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
• IEC-60947-7-4-RL - Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
• IEC-60947-7-5 - Low-voltage switchgear and controlgear - Part 7-5: Ancillary equipment - Terminal blocks for aluminium conductors
• IEC-60947-8 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
• IEC-60947-8-1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
• IEC-60947-8-AM2 - Amendment 2 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
• IEC-60947-9-1 - Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices
• IEC-60947-9-2 - Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices
• IEC-60947 SERIES - Low-voltage switchgear and controlgear - ALL PARTS
• IEC-60999-2 - Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
• IEC-61095 - Electromechanical contactors for household and similar purposes
• IEC-61095-RL - Electromechanical contactors for household and similar purposes
• IEC-61439-0 - Low-voltage switchgear and controlgear assemblies- Part 0: Guidance to specifying assemblies
• IEC 61439-1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules
• IEC-61439-1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules
• IEC 61439-1-RL - Low-voltage switchgear and controlgear assemblies - Part 1: General rules
• IEC-61439-2 - Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
• IEC-61439-3 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
• IEC-61439-3 CMV - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
• IEC-61439-3 EXV - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
• IEC-61439-3-EXV-CMV - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
• IEC-61439-4 - Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
• IEC-61439-4-EXV - Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
• IEC-61439-4-RL - Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
• IEC-61439-5 - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
• IEC-61439-6 - Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)
• IEC-61439-7 - Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
• IEC-61439-7-RL - Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
• IEC-61641 - Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault
• IEC-61915 - Low-Voltage Switchgear & Controlgear - Principles for the Development of Device Profiles F
• IEC-61915-1 - Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles
• IEC-61915-2 - Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment
• IEC-62026-1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules
• IEC-62026-1-RL - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules
• IEC-62026-2 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
• IEC-62026-2-AM1 - Amendment 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
• IEC-62026-3 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
• IEC-62026-5 - Part 5: Smart Distributed System (Sds), Low-Voltage Switchgear & Controlgear - Controller-
• IEC-62026-6 - Part 6: Seriplex (Serial Multiplexed Control Bus), Low-Voltage Switchgear & Controlgear -
• IEC-62026-7 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
• IEC-62091 - Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps
• IEC-62208 - Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
• IEC-62208 CMV - Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
• IEC-62626-1 - Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 - Isolation of electrical equipment during repair and maintenance work in specific applications
• IEC-62626-1-RL - Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 - Isolation of electrical equipment during repair and maintenance work in specific applications
• IEC-62683 - Low-voltage switchgear and controlgear - Product data and properties for information exchange
• IEC-62683-1 - Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data
• IEC-62948 - Industrial networks - Wireless communication network and communication profiles - WIA-FA
• IEC-63054 - Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures
• IEC-63107 - Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC Assemblies) according to IEC 61439-2
• IEC-63119-1 - Information exchange for electric vehicle charging roaming service - Part 1: General
• IEC-63196 - Switchgear and controlgear and their assemblies for low-voltage - Energy efficiency
• IEC-63201 - Low-voltage switchgear and controlgear - Guidance for the development of embedded software
• IEC-63208 - Low-voltage switchgear and controlgear - Security aspects
• IEC-63216 - Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies
• IEC-63404 - Switchgear and controlgear and their assemblies for low voltage - Integration of radiocommunication device above 380 MHz into an equipment
• IEC-63434 - Low voltage switchgear and controlgear - Partial discharge voltages and PD-level in low voltage switchgear and controlgear
• IEC-715 - Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
• IEC-715-1 - Amendment No. 1
• IEC/PAS-62026-7 - Part 7: Componet, Low-Voltage Switchgear & Controlgear - Controller-Device Interfaces

ISO:

• ISO-8528-4 - Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear

Other SDOs:

• EN-50041 - Low-voltage switchgear and controlgear - Control switches - Position switches 42,5 x 80 - Dimensions and characteristics
• EN-50047 - Low-voltage switchgear and controlgear - Control switches - Position switches 30 × 55 - Dimensions and characteristics
• EN-50152-3-1 - Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices
• EN-50152-3-2 - Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers
• EN-50152-3-3 - Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers
• EN-50272-1 - Safety requirements for secondary batteries and battery installations - Part 1: General safety information
• EN-50295 - Low-Voltage Switchgear & Controlgear, Controller & Device Interface Systems, Actuator
• EN-60439-2 - Low Voltage Switchgear & Controlgear Assemblies, Particular Requirements for Busbar T
• EN-60439-3 - Particular Requirements for Low-Voltage Switchgear & Control Gear Assemblies Intended
• EN-60715 - Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
• EN-60947-1 - Low-voltage switchgear and controlgear - Part 1: General rules
• EN-60947-2 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
• EN-60947-3 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
• EN-60947-4-1 - Part 4-1: Contactors & Motor-Starters - Electromechanical Contactors & Motor-Starters,
• EN-60947-4-2 - Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
• EN-60947-4-3 - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
• EN-60947-5-1 - Part 5-1: Control Circuit Devices & Switching Elements - Electromechanical Control Cir
• EN-60947-5-2 - Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
• EN-60947-5-3 - Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
• EN-60947-5-5 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
• EN-60947-5-8 - Low-Voltage Switchgear & Controlgear, Control Circuit Devices & Switching Elements, Th
• EN-60947-5-9 - Low-Voltage Switchgear & Controlgear, Control Circuit Devices & Switching Elements, Fl
• EN-60947-6-1 - Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
• EN-60947-6-2 - Low-Voltage Switchgear & Controlgear - Part 6: Multiple Function Equipment - Section 2
• EN-60947-7-1 - Part 7-1: Ancillary Equipment - Terminal Blocks for Copper Conductors, Low-Voltage SWI
• EN-60947-7-2 - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conduc
• EN-60947-7-3 - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks, Low-Volt
• EN-60947-7-4 - Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
• EN-60947-8 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
• EN-61095 - Electromechanical Contactors for Household & Similar Purposes
• EN-61439-1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules
• EN-61439-2 - Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
• EN-61439-3 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
• EN-61439-4 - Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
• EN-61439-5 - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
• EN-61439-6 - Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)
• EN-61915-1 - Part 1: General Rules for the Development of Device Profiles, Low-Voltage Switchgear &
• EN-62026-1 - Low-Voltage Switchgear & Controlgear, Controller-Device Interfaces (Cdis), General Rul
• EN-62026-2 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
• EN-62026-3 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
• EN-62026-7 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
• EN-62208 - Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
• EN-62626-1 - Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
• EN-62683 - Low-voltage switchgear and controlgear - Product data and properties for information exchange
• EN-62683-1 - Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data
• EN-IEC-60947-4-1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor- starters (IEC 60947-4-1:2018)
• EN-IEC-60947-7-4 - Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (IEC 60947-7-4:2019)
• EN-IEC-62026-1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules (IEC 62026-1:2019)
• SS-EN-60947-1 - Low-voltage switchgear and controlgear - Part 1: General rules
• SS-EN-60947-3 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switchdisconnectors and fuse-combination units
• SS-EN-60947-5-1 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
• SS-EN-60947-8 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
• SS-EN-61439-1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules