Document Center List of Standards on Electrical And Electronic Equipment. Control Systems Including Ignition Systems And Starter Motors
ICS Code 43.060.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-AU-262-1 - Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing
- BS-AU-262-2 - Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M12 x 1.25 glow-plugs
- BS-AU-262-3 - Road Vehicles, Sheath-Type Glow-Plugs With Conical Seating and Their Cylinder Head Housings
- BS-ISO-11565 - Road vehicles. Spark-plugs. Test methods and requirements
- BS-ISO-13476 - Road vehicles. Ignition coils. Electrical characteristics and test methods
- BS-ISO-16246 - Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
- BS-ISO-17447-1 - Road Vehicles. Glow plugs with conical seating and their cylinder head housing
- BS-ISO-17447-2 - Road Vehicles. Glow-plugs with conical seating and their cylinder head housing
- BS-ISO-17447-3 - Road Vehicles. Glow-plugs with conical seating and their cylinder head housing
- BS-ISO-19812 - Road vehicles. M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
- BS-ISO-20574 - Road vehicles. Durability test method for starter motor for stop and start system
- BS-ISO-21956 - Road vehicles. Ergonomics aspects of transport information and control systems. Human machine interface specifications for keyless ignition systems
- BS-ISO-22565 - Road vehicles. Durability test method of starter relay for stop and start system
- BS-ISO-22977 - Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
- BS-ISO-2346 - Road vehicles. M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
- BS-ISO-24195 - Road vehicles. Vocabulary and characteristics for engineering of starting devices
- BS-ISO-2705 - Road Vehicles, m12 X 1,25 Spark Plugs With Flat Seating & Their Cylinder Head Housings
- BS-ISO-28741 - Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
- BS-ISO-28741-TC - Tracked Changes. Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
- BS-ISO-3553-2 - Road vehicles. High tension connectors for ignition coils and distributors
- BS-ISO-6518-1 - Road vehicles. Ignition systems
- BS-ISO-6550-3 - Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing
- BS-ISO-6550-4 - Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing
- BS-ISO-6856 - Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements
- BS-ISO-7578 - Road vehicles. Sheath-type glow-plugs. General requirements and test methods
- BS-ISO-8470 - Road Vehicles m14 X 1,25 Spark-Plugs With Flat Seating & 16 mm Hexagon & Their Cylind
- BS-ISO-8854 - Road vehicles. Alternators with regulators. Test methods and general requirements
- BS-ISO-8856 - Road vehicles. Electrical performance of starter motors. Test methods and general requirements
- PD-IEC-62343-6-2 - Dynamic modules
IEC:
- IEC-61588 - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- IEC-62343-6-2 - Dynamic modules - Part 6-2: Design guide - Software and hardware interfaces - Survey results
ISO:
- ISO-10455 - Road vehicles - Dry ignition coils using rotating high-voltage distributor
- ISO-11565 - Road vehicles - Spark-plugs - Test methods and requirements
- ISO-11748-1 - Road vehicles -- Technical documentation of electrical and electronic systems -- Part 1: Content of exchanged documents
- ISO-11748-2 - Road vehicles -- Technical documentation of electrical and electronic systems -- Part 2: Documentation agreement
- ISO-11748-3 - Road vehicles - Technical documentation of electrical and electronic systems - Part 3: Application example
- ISO-13476 - Road vehicles - Ignition coils - Electrical characteristics and test methods
- ISO-14508 - Road vehicles - Spark-plugs - Terminals
- ISO-15409 - Road vehicles - Heat rating of spark plugs
- ISO-16246 - Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
- ISO-17447-1 - Road Vehicles - Glow plugs with conical seating and their cylinder head housing - Part 1: Basic characteristics and dimensions for metal-sheath-type glow plugs
- ISO-17447-2 - Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
- ISO-17447-3 - Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 3: Tests and requirements
- ISO-1919 - Corrigendum
- ISO-19812 - Road vehicles - M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
- ISO-20574 - Road vehicles - Durability test method for starter motor for stop and start system
- ISO-21956 - Road vehicles - Ergonomics aspects of transport information and control systems - Human machine interface specifications for keyless ignition systems
- ISO-22565 - Road vehicles - Durability test method of starter relay for stop and start system
- ISO-22977 - Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
- ISO-2344 - Road vehicles - M14 x 1,25 spark-plugs with conical seating and their cylinder head housings
- ISO-2345 - Road vehicles - M18 x 1,5 spark-plugs with conical seating and their cylinder head housing
- ISO-2346 - Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
- ISO-2347 - Road vehicles - M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing
- ISO-24195 - Road vehicles - Vocabulary and characteristics for engineering of starting devices
- ISO-2704 - Road vehicles - M10 x 1 spark-plugs with flat seating and their cylinder head housings
- ISO-2705 - Road vehicles - M12 x 1,25 spark-plugs with flat seating and their cylinder head housings
- ISO-28741 - Road vehicles - Spark-plugs and their cylinder head housings - Basic characteristics and dimensions
- ISO-3285 - Road vehicles - Ignition coil mounting brackets
- ISO-3412 - Road vehicles - Screened and waterproof spark-plugs and their connections - Types 1A and 1B
- ISO-3553-1 - Road vehicles - High-tension connections for ignition coils and distributors - Part 1 : Socket-type
- ISO-3553-2 - Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types
- ISO-3808 - Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements
- ISO-3895 - Road vehicles - Screened and waterproof spark-plug and its connection - Type 2
- ISO-3896 - Road vehicles - Screened and waterproof spark-plug and its connection - Type 3
- ISO-4024 - Road vehicles - Ignition coils - Low-tension cable connections
- ISO-6518-1 - Road vehicles - Ignition systems - Part 1: Vocabulary
- ISO-6518-2 - Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods
- ISO-6550-1 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 1: M14 x 1,25 glow-plugs
- ISO-6550-2 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 x 1,25 glow-plugs
- ISO-6550-3 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs
- ISO-6550-4 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs
- ISO-6856 - Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements
- ISO-7578 - Road vehicles - Sheath-type glow-plugs - General requirements and test methods
- ISO-7650 - Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4
- ISO-7650-1 - Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4 - Amendment 1
- ISO-7651 - Commercial vehicles et buses - Mounting dimensions for alternators of types 1, 2 and 3
- ISO-8123 - Road vehicles - Diametral pitch starter motor pinions
- ISO-8470 - Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
- ISO-8854 - Road vehicles - Alternators with regulators - Test methods and general requirements
- ISO-8856 - Road vehicles - Electrical performance of starter motors - Test methods and general requirements
- ISO-8856-1 - Amendment 1 to ISO 8856:1995
- ISO-9457-1 - Road vehicles - Metric starter motor pinions - Part 1: Currently used pinions
- ISO-9457-2 - Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20 degree pressure angle
- ISO-9458 - Passenger cars - Starter motor electrical connections
- ISO-9534 - Road vehicles - Fuel pump electric connections
Other SDOs:
- JIS-D-5203 - Automotive parts -- Starter motors for commercial vehicles and buses -- Mounting dimensions
- SMS-2049 - Loose flanges - PN 10
- SMS-2050 - Loose flanges - PN 16
- SMS-2051 - Loose flanges - PN 25
- SMS-2052 - Loose flanges - PN 40
- SMS-ISO-4024 - Road vehicles - Low tension cable connections forignition coils
- SS-EN-15305 - Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
- SS-ISO-11565 - Road vehicles - Spark-plugs - Test methods and requirements (ISO 11565:2006, IDT)
- SS-ISO-13476 - Road vehicles - Ignition coils - Electrical characteristics and test methods
- SS-ISO-14508 - Road vehicles - Spark-plugs - Terminals (ISO 14508:2006, IDT)
- SS-ISO-1919 - Road vehicles - M14 x 1,25 spark-plugs with flat seating and their cylinder head housings
- SS-ISO-19812 - Road vehicles - M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings (ISO 19812:2006, IDT)
- SS-ISO-20574 - Road vehicles - Durability test method for starter motor for stop and start system (ISO 20574:2019, IDT)
- SS-ISO-21956 - Road vehicles - Ergonomics aspects of transport information and control systems - Human machine interface specifications for keyless ignition systems (ISO 21956:2019, IDT)
- SS-ISO-22565 - Road vehicles - Durability test method of starter relay for stop and start system (ISO 22565:2019, IDT)
- SS-ISO-2344 - Road vehicle - M14 x 1,25 spark-plugs with conical seating and their cylinder head housings
- SS-ISO-2345 - Road vehicles - M18 x 1,15 spark-plugs with conical seating and their cylinder head housing
- SS-ISO-2346 - Road vehicles - M14 x 1,25, compact spark-plugs with flat seating and their cylinder head housing
- SS-ISO-2347 - Road vehicles - M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing
- SS-ISO-23684 - Road vehicles Technical personnel dealing with natural gas vehicles (NGVs) Training and qualification (ISO 23684:2023, IDT)
- SS-ISO-24195 - Road vehicles Vocabulary and characteristics for engineering of starting devices (ISO 24195:2022, IDT)
- SS-ISO-2542 - Internal combustion engines - Spark plug ignition- Terminology
- SS-ISO-2704 - Road vehicles - M10 x 1 spark-plugs with flat seating and their cylinder head housings
- SS-ISO-2705 - Road vehicles - M12 x 1,25 spark-plugs with flat seating and their cylinder head housings (ISO 2705:2006, IDT)
- SS-ISO-28741 - Road vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions (ISO 28741:2023, IDT)
- SS-ISO-3285 - Road vehicles - Ignition coil mounting brackets
- SS-ISO-3412 - Road vehicles - Screened and waterproof spark plug and its connection - Type 1
- SS-ISO-3553-2 - Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types
- SS-ISO-3808-1 - Road vehicles - Unscreened high-tension ignition cables - Part 1:dimensions, general requirements and test methods
- SS-ISO-3808-2 - Road vehicles - Unscreened high-tension ignition cables - Part 2:cable classes, types, applicable tests and special requirements
- SS-ISO-3895 - Road vehicles - Screened and waterproof spark-plug and its connection - Type 2
- SS-ISO-3896 - Road vehicles - Screen and waterproof spark-plug and its connection - Type 3
- SS-ISO-4024 - Road vehicles - Ignition coils - Low-tension cable connections
- SS-ISO-4548-6 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
- SS-ISO-6518-1 - Road vehicles - Ignition systems - Part 1: Vocabulary (ISO 6518-1:2002, IDT)
- SS-ISO-6518-2 - Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods
- SS-ISO-6550 - Road vehicles - M12 x 1,25 and M14 x 1,25 sheath type glow plugs with conical seating and their cylinder head housing
- SS-ISO-6550-1 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 1: M14 x 1,25 glow-plugs
- SS-ISO-6550-2 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 x 1,25 glow-plugs
- SS-ISO-6550-3 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs (ISO 6550-3:2013, IDT)
- SS-ISO-6550-4 - Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs (ISO 6550-4:2014, IDT)
- SS-ISO-7578 - Road vehicles - Sheath type glow-plugs - General requirements and test methods
- SS-ISO-7650 - Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4
- SS-ISO-7650-AM1 - Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4 - Amendment 1
- SS-ISO-8470 - Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings (ISO 8470:2006, IDT)
- SS-ISO-8854 - Road vehicles - Alternators with regulators - Test methods and general requirements (ISO 8854:2012, IDT)
- SS-ISO-8856 - Road vehicles - Electrical performance of starter motors - Test methods and general requirements (ISO 8856:2014, IDT)
- SS-ISO-9457-2 - Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20 degrees pressure angle