Document Center List of Standards on Sacks. Bags Including Sachets, Envelopes
ICS Code 55.080
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D5414 - Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM-D7880 - Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022)
- ASTM-D959 - Method of Drop Test for Filled Bags (Withdrawn 1993)
- ASTM-F119 - Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
- ASTM-F1278 - Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
- ASTM-F151 - Standard Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004)
- ASTM-F88 - Standard Test Method for Seal Strength of Flexible Barrier Materials
BSI:
- BS-1133-7.2 - Bags and Envelopes
- BS-1214 - Specification for hessian sandbags and rot-proofed hessian sandbags
- BS-3130-7 - Glossary of packaging terms. Paper sacks
- BS-6642 - Specification for disposable plastics refuse sacks made from polyethylene
- BS-7804-2 - Tea sacks
- BS-EN-13592 - Plastics sacks for household waste collection. Types, requirements and test methods
- BS-EN-13592-TC - Tracked Changes. Plastics sacks for household waste collection. Types, requirements and test methods
- BS-EN-14867 - Packaging. Plastic freezer bags. Specifications and test methods
- BS-EN-61340-4-4 - Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
- BS-EN-868-4 - Packaging for terminally sterilized medical devices
- BS-EN-868-5 - Packaging for terminally sterilized medical devices
- BS-EN-868-5-TC - Tracked Changes. Packaging for terminally sterilized medical devices
- BS-EN-IEC-61340-4-4 - Electrostatics
- BS-EN-IEC-61340-4-4-TC - Tracked Changes. Electrostatics
- BS-EN-ISO-11897 - Packaging. Sacks made from thermoplastic flexible film. Tear propagation on edge folds
- BS-EN-ISO-7965-1 - Packaging. Drop test
- BS-EN-ISO-7965-1-TC - Tracked Changes. Packaging. Drop test
IEC:
- IEC-61340-4-4 - Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
- IEC-61340-4-4-AM1 - Amendment 1 - Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
ISO:
- ISO-11897 - Packaging -- Sacks made from thermoplastic flexible film -- Tear propagation on edge folds
- ISO-15119 - Packaging -- Sacks -- Determination of the friction of filled sacks
- ISO-15867 - Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology
- ISO-23560 - Woven polypropylene sacks for bulk packaging of foodstuffs
- ISO-6590-1 - Packaging -- Sacks -- Vocabulary and types -- Part 1 : Paper sacks
- ISO-6590-2 - Packaging -- Sacks -- Vocabulary and types -- Part 2 : Sacks made from thermoplastic flexible film
- ISO-6591-1 - Packaging -- Sacks -- Description and method of measurement -- Part 1 : Empty paper sacks
- ISO-6591-2 - Packaging -- Sacks -- Description and method of measurement -- Part 2 : Empty sacks made from thermoplastic flexible film
- ISO-6599-1 - Packaging -- Sacks -- Conditioning for testing -- Part 1 : Paper sacks
- ISO-7023 - Packaging -- Sacks -- Method of sampling empty sacks for testing
- ISO-7965-1 - Packaging - Drop test - Part 1: Paper sacks
- ISO-7965-2 - Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film
- ISO-8351-1 - Packaging -- Method of specification for sacks -- Part 1: Paper sacks
- ISO-8351-2 - Packaging -- Method of specification for sacks -- Part 2: Sacks made from thermoplastic flexible film
- ISO-8367-1 - Packaging -- Dimensional tolerances for general purpose sacks -- Part 1: Paper sacks
- ISO-8367-2 - Packaging -- Dimensional tolerances for general purpose sacks -- Part 2: Sacks made from thermoplastic flexible film
- ISO-9884-1 - Tea sacks -- Specification -- Part 1: Reference sack for palletized and containerized transport of tea
- ISO-9884-2 - Tea sacks -- Specification -- Part 2: Performance specification for sacks for palletized and containerized transport of tea
Other SDOs:
- DIN-EN-13592 - Plastics sacks for household waste collection - Types, requirements and test methods; German version EN 13592:2017
- DIN-EN-14867 - Packaging, Plastic Freezer Bags, Specifications & Test Methods
- DIN-EN-ISO-15119 - Packaging - Sacks, Determination of the Friction of Filled Sacks
- EN-13592 - Plastics sacks for household waste collection - Types, requirements and test methods
- EN-14867 - Packaging, Plastic Freezer Bags, Specifications & Test Methods
- EN-61340-4-4 - Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
- EN-868-4 - Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
- EN-868-5 - Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- EN-IEC-61340-4-4 - Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
- EN-ISO-15119 - Packaging - Sacks, Determination of the Friction of Filled Sacks
- SIS-350102 - Fasteners in concrete structures - Sockets for screws
- SIS-350103 - Fasteners in concrete structures - Sockets
- SIS-350104 - Fasteners in concrete structures - Fixing plates
- SS-844010 - Flexible intermediate bulk containers - Scope of inspection and terminology
- SS-844011 - Flexible intermediate bulk containers - General guidelines for handling etc
- SS-844012 - Flexible intermediate bulk containers - Heavy duty multi-trip FIBCs
- SS-844013 - Flexible intermediate bulk containers - Standard duty re-usable FIBCs (Svensk-Engelsk)
- SS-844014 - Flexible intermediate bulk containers - Standard duty single-trip FIBCs
- SS-844015 - Flexible intermediate bulk containers - Standard duty single-trip, pallet borne FIBCs
- SS-844016 - Flexible Intermediate Bulk Containers - (FIBCs) -Cyclic top lift performance, methods of test
- SS-844017 - Flexible intermediate bulk containers - Compression resistance test
- SS-844018 - Flexible intermediate bulk containers - UV-resistance test
- SS-844020 - Flexible intermediate bulk containers - Dynamic drop test
- SS-844614 - Sacks of plastic film - Tensile test of heat seals and glued seams
- SS-844615 - Sacks of plastic film - Determination of resistance of glued seams to peeling
- SS-844616 - Sacks of plastic film - Drop test
- SS-844617 - Plastic film sacks - Designations and measurementof dimensions
- SS-844619 - Sacks of plastic film - Tolerances
- SS-EN-1086 - Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed
- SS-EN-13590 - Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
- SS-EN-13592 - Plastics sacks for household waste collection - Types, requirements and test methods
- SS-EN-13593 - Packaging - Paper sacks for household waste collection - Types, requirements and test methods
- SS-EN-14867 - Packaging - Plastic freezer bags - Specifications and test methods
- SS-EN-17427 - Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations
- SS-EN-26590-1 - Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks (ISO 6590-1:1983)
- SS-EN-26590-2 - Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO6590-2:1986)
- SS-EN-26591-1 - Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks (ISO 6591-1:1984)
- SS-EN-26591-2 - Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591:1985)
- SS-EN-26599-1 - Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:1983)
- SS-EN-27023 - Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983)
- SS-EN-27965-1 - Packaging - Sacks - Drop test - Part 1: Paper sacks (ISO 7965-1:1984)
- SS-EN-765 - Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only
- SS-EN-766 - Sacks for the transport of food aid - Sacks made of jute fabric
- SS-EN-767 - Sacks for the transport of food aid - Sacks made of woven jute/polyolefine fabric
- SS-EN-768 - Sacks for the transport of food aid - Sacks made of lined cotton fabric
- SS-EN-769 - Sacks for the transport of food aid - Sacks made of woven cotton/polyolefine fabric
- SS-EN-770 - Sacks for the transport of food aid - Paper sacks
- SS-EN-787 - Sacks for the transport of food aid - Tubular sacks made of composite film
- SS-EN-788 - Sacks for the transport of food aid - Sacks made of polyethylene film
- SS-EN-ISO-11897 - Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999)
- SS-EN-ISO-15119 - Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000)
- SS-EN-ISO-15867 - Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003)
- SS-EN-ISO-75-2 - Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
- SS-EN-ISO-7965-2 - Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993)
- SS-EN-ISO-8351-1 - Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)
- SS-EN-ISO-8351-2 - Packaging - Method of specification for sacks - Part 2: Sacks made from thermo-plastic flexible film (ISO 8351-2:1994)
- SS-EN-ISO-8367-1 - Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)
- SS-EN-ISO-8367-2 - Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
- SS-ISO-11897 - Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds
- SS-ISO-23560 - Woven polypropylene sacks for bulk packaging of foodstuffs (ISO 23560:2015, IDT)
- SS-ISO-7965-1 - Packaging - Sacks - Drop test - Part 1: Paper sacks