Document Center List of Standards on Physicochemical Methods Of Analysis Including Spectrophotometric And Chromatographic Analysis
ICS Code 71.040.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B890 - Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM-C1111 - Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
- ASTM-C1118 - Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems (Withdrawn 2011)
- ASTM-C1133 - Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
- ASTM-C1163 - Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
- ASTM-C1301 - Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
- ASTM-C1307 - Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
- ASTM-C1508 - Standard Test Method for Determination of Bromine and Chlorine in UF
6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy - ASTM-C1510 - Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
- ASTM-C1561 - Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry
- ASTM-C1590 - Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
- ASTM-C1605 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry (Withdrawn 2023)
- ASTM-C1614 - Standard Practice for the Determination of 237Np, 232Th, 235U and 238U in Urine by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry. (Withdrawn 2015)
- ASTM-C1647 - Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
- ASTM-D1658 - Method of Test for Carbon Number Distribution of Aromatic Compounds in Naphthas by Mass Spectometry (Withdrawn 1983)
- ASTM-D1976 - Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
- ASTM-D3016 - Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
- ASTM-D3371 - Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography (Withdrawn 2002)
- ASTM-D3457 - Standard Test Method for Preparation of Methyl Esters From Fatty Acids for Determination of Fatty Acid Composition by Gas-Liquid Chromatography (Withdrawn 2000)
- ASTM-D3649 - Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water
- ASTM-D3736 - Test Method for Operating Characteristics of Reverse-Osmosis Devices (Withdrawn 1984)
- ASTM-D4127 - Standard Terminology Used with Ion-Selective Electrodes
- ASTM-D4194 - Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
- ASTM-D4358 - Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy (Withdrawn 2006)
- ASTM-D4626 - Standard Practice for Calculation of Gas Chromatographic Response Factors
- ASTM-D4628 - Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
- ASTM-D5015 - Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
- ASTM-D5128 - Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
- ASTM-D5185 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D5399 - Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM-D5723 - Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM-D5739 - Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
- ASTM-D5758 - Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
- ASTM-D5794 - Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
- ASTM-D5896 - Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
- ASTM-D5910 - Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
- ASTM-D5917 - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
- ASTM-D5953M - Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
- ASTM-D5954 - Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
- ASTM-D5986 - Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C
8 –C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy - ASTM-D5987 - Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods (Withdrawn 2020)
- ASTM-D5996 - Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
- ASTM-D6010 - Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices (Withdrawn 2016)
- ASTM-D6031 - Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
- ASTM-D604 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM-D6042 - Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
- ASTM-D6060 - Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
- ASTM-D6071 - Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
- ASTM-D6132 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
- ASTM-D6142 - Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
- ASTM-D6144 - Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
- ASTM-D6159 - Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
- ASTM-D6228 - Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
- ASTM-D6229 - Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
- ASTM-D6277 - Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM-D6296 - Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
- ASTM-D6304 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM-D6334 - Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Withdrawn 2022)
- ASTM-D6350 - Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy (Withdrawn 2023)
- ASTM-D6379 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM-D6420 - Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
- ASTM-D6428 - Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection (Withdrawn 2006)
- ASTM-D6526 - Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography (Withdrawn 2018)
- ASTM-D6563 - Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography (Withdrawn 2018)
- ASTM-D6569 - Standard Test Method for On-Line Measurement of pH
- ASTM-D6591 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM-D6621 - Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
- ASTM-D6623 - Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography
- ASTM-D6647 - Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
- ASTM-D6732 - Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6733 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
- ASTM-D6735 - Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method (Withdrawn 2018)
- ASTM-D6756 - Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
- ASTM-D6785 - Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6802 - Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry (Withdrawn 2019)
- ASTM-D6806 - Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
- ASTM-D6807 - Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from
2 to 100 μS/cm - ASTM-D6843 - Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC) - ASTM-D6844 - Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC) - ASTM-D6866 - Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM-D6886 - Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
- ASTM-D6919 - Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
- ASTM-D6968 - Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection (Withdrawn 2024)
- ASTM-D7085 - Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
- ASTM-D7090 - Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
- ASTM-D7165 - Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
- ASTM-D7169 - Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
- ASTM-D7183 - Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM-D7319 - Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
- ASTM-D7343 - Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
- ASTM-D7442 - Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
- ASTM-D7515 - Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
- ASTM-D7517 - Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
- ASTM-D7550 - Standard Test Method for Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion Chromatography (Withdrawn 2017)
- ASTM-D7707 - Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
- ASTM-D7740 - Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
- ASTM-D7951 - Standard Specification for Disproportionation (TDP) Toluene
- ASTM-E1015 - Practice for Reporting Spectra in X-Ray Photoelectron Spectroscopy (Withdrawn 1994)
- ASTM-E1078 - Standard Guide for Specimen Preparation and Mounting in Surface Analysis
- ASTM-E1097 - Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
- ASTM-E1127 - Standard Guide for Depth Profiling in Auger Electron Spectroscopy
- ASTM-E1140 - Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
- ASTM-E1151 - Standard Practice for Ion Chromatography Terms and Relationships
- ASTM-E116 - Standard Practice for Photographic Photometry in Spectrochemical Analysis (Withdrawn 2002)
- ASTM-E1162 - Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM-E1184 - Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry
- ASTM-E1217 - Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
- ASTM-E1252 - Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM-E1303 - Standard Practice for Refractive Index Detectors Used in Liquid Chromatography
- ASTM-E131 - Standard Terminology Relating to Molecular Spectroscopy
- ASTM-E1329 - Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis (Withdrawn 2019)
- ASTM-E135 - Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
- ASTM-E1361 - Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM-E1387 - Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography (Withdrawn 2010)
- ASTM-E1426 - Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
- ASTM-E1449 - Standard Guide for Supercritical Fluid Chromatography Terms and Relationships
- ASTM-E1452 - Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis (Withdrawn 2005)
- ASTM-E1504 - Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM-E1505 - Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards
- ASTM-E1508 - Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
- ASTM-E1510 - Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
- ASTM-E1511 - Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
- ASTM-E1523 - Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
- ASTM-E1560 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
- ASTM-E1569 - Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique (Withdrawn 2018)
- ASTM-E158 - Standard Practice for Fundamental Calculations to Convert Intensities into Concentrations in Optical Emission Spectrochemical Analysis (Withdrawn 2004)
- ASTM-E1621 - Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM-E1622 - Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006)
- ASTM-E1634 - Standard Guide for Performing Sputter Crater Depth Measurements
- ASTM-E1635 - Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM-E1636 - Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function (Withdrawn 2019)
- ASTM-E1642 - Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM-E1644 - Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- ASTM-E1655 - Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM-E1657 - Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM-E167 - Standard Practice for Goniophotometry of Objects and Materials (Withdrawn 2005)
- ASTM-E168 - Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM-E1683 - Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM-E169 - Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
- ASTM-E1698 - Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
- ASTM-E172 - Practice for Describing and Specifying the Excitation Source in Emission Spectrochemical Analysis (Withdrawn 2001)
- ASTM-E1726 - Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
- ASTM-E1727 - Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
- ASTM-E1729 - Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
- ASTM-E1731 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
- ASTM-E1731M - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves [Metric] (Withdrawn 2000)
- ASTM-E1754 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
- ASTM-E1759 - Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products (Withdrawn 2003)
- ASTM-E1770 - Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry
- ASTM-E1771 - Standard Test Method for Determination of Copper in Anode and Blister Copper (Withdrawn 2016)
- ASTM-E1775 - Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM-E1786 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
- ASTM-E1787 - Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
- ASTM-E1788 - Standard Test Method for Acidity in Acrylonitrile (Withdrawn 2022)
- ASTM-E1790 - Standard Practice for Near Infrared Qualitative Analysis
- ASTM-E1792 - Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
- ASTM-E1805 - Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
- ASTM-E1806 - Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM-E1812 - Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment (Withdrawn 2004)
- ASTM-E1829 - Standard Guide for Handling Specimens Prior to Surface Analysis
- ASTM-E1833 - Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition (Withdrawn 2022)
- ASTM-E1852 - Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
- ASTM-E1865 - Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
- ASTM-E1866 - Standard Guide for Establishing Spectrophotometer Performance Tests
- ASTM-E1898 - Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
- ASTM-E1915 - Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
- ASTM-E1941 - Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
- ASTM-E1973 - Standard Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination (Withdrawn 2004)
- ASTM-E1979 - Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
- ASTM-E1999 - Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
- ASTM-E2008 - Standard Test Methods for Volatility Rate by Thermogravimetry
- ASTM-E2040 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM-E2043 - Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
- ASTM-E2054 - Practice for Performance-Based Description of Instruments in Chemical Analysis Methods (Withdrawn 2005)
- ASTM-E2055 - Standard Practice for Referencing Test Methods for Chemical Analysis of Metals and Related Materials (Withdrawn 2006)
- ASTM-E2056 - Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
- ASTM-E2105 - Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM-E2108 - Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
- ASTM-E2111 - Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
- ASTM-E2117 - Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
- ASTM-E2120 - Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
- ASTM-E2143 - Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
- ASTM-E2193 - Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM-E2206 - Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM-E2224 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM-E2225 - Standard Guide for Forensic Examination of Fabrics and Cordage
- ASTM-E2227 - Standard Guide for Forensic Examination of Dyes in Textile Fibers by Thin-Layer Chromatography
- ASTM-E2269 - Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
- ASTM-E2310 - Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
- ASTM-E2371 - Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
- ASTM-E2409 - Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol
(Gas Chromatographic Method) - ASTM-E2426 - Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
- ASTM-E2529 - Standard Guide for Testing the Resolution of a Raman Spectrometer
- ASTM-E2530 - Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015)
- ASTM-E260 - Standard Practice for Packed Column Gas Chromatography
- ASTM-E2627 - Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
- ASTM-E2649 - Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
- ASTM-E2695 - Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy (Withdrawn 2018)
- ASTM-E2719 - Standard Guide for Fluorescence—Instrument Calibration and Qualification
- ASTM-E2729 - Standard Practice for Rectification of Spectrophotometric Bandpass Differences
- ASTM-E2735 - Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
- ASTM-E2857 - Standard Guide for Validating Analytical Methods
- ASTM-E2867 - Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
- ASTM-E2911 - Standard Guide for Relative Intensity Correction of Raman Spectrometers
- ASTM-E2913 - Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
- ASTM-E2914 - Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
- ASTM-E305 - Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
- ASTM-E307 - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
- ASTM-E3163 - Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action
- ASTM-E334 - Standard Practice for General Techniques of Infrared Microanalysis
- ASTM-E355 - Standard Practice for Gas Chromatography Terms and Relationships
- ASTM-E386 - Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy (Withdrawn 2015)
- ASTM-E406 - Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
- ASTM-E416 - Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory (Withdrawn 2005)
- ASTM-E507 - Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM-E508 - Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM-E516 - Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
- ASTM-E539 - Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM-E573 - Standard Practices for Internal Reflection Spectroscopy
- ASTM-E594 - Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
- ASTM-E682 - Standard Practice for Liquid Chromatography Terms and Relationships
- ASTM-E685 - Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM-E697 - Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
- ASTM-E70 - Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
- ASTM-E827 - Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy (Withdrawn 2017)
- ASTM-E840 - Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
- ASTM-E863 - Standard Practice for Describing Flame Atomic Absorption Spectroscopy Equipment (Withdrawn 2004)
- ASTM-E876 - Standard Practice for Use of Statistics in the Evaluation of Spectrometric Data (Withdrawn 2003)
- ASTM-E896 - Standard Test Method for Conducting Aqueous Direct Photolysis Tests (Withdrawn 2013)
- ASTM-E902 - Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers (Withdrawn 2011)
- ASTM-E925 - Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
- ASTM-E984 - Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
- ASTM-F1708 - Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies (Withdrawn 2003)
- ASTM-F1710 - Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2023)
- ASTM-F1723 - Standard Practice for Evaluation of Polycrystalline Silicon Rods by Float-Zone Crystal Growth and Spectroscopy (Withdrawn 2003)
- ASTM-F2139 - Standard Test Method for Measuring Nitrogen Concentration in Silicon Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)
- ASTM-F2259 - Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy (Withdrawn 2021)
- ASTM-F2260 - Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
- ASTM-F2617 - Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
- ASTM-G136 - Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
- ASTM-G140 - Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
- ASTM-G144 - Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
- ASTM-G178 - Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
- ASTM-G5 - Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- ASTM-PS116 - Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films (Withdrawn 2001)
- ASTM-PS52 - Test Methods for Determination of Trace Elements in Coal, Cone and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spect (Withdrawn 1998)
- ASTM-PS87 - Practice for Ultrasonic Extraction of Paint, Soil, and Air Samples for Subsequent Determination of Lead (Withdrawn 1998)
- ASTM-PS88 - Practice for Determination of Lead in Paint, Settled Dust, Soil, and Air Particulate by Field-Portable Electroanalysis (Withdrawn 1999)
BSI:
- BS-1647-1 - pH measurement
- BS-1647-2 - pH measurement
- BS-4633-&-4634 - Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
- BS-EN-15608 - Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas- chromatographic method
- BS-EN-15768 - Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances
- BS-EN-16877 - Animal feeding stuffs. Methods of sampling and analysis. Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LCMS
- BS-EN-16939 - Animal feeding stuffs. Methods of sampling and analysis. Detection of tylosin, spiramycin and virginiamycin. Thin Layer Chromatography and bioautography
- BS-EN-17299 - Animal feeding stuffs. Methods of sampling and analysis. Screening and determination of authorized coccidiostats at additive and 1 % and 3 % cross-contamination levels, and of non-registered coccidiostats and of one antibiotic at sub-additive levels, in compound feed with High Performance Liquid Chromatography. Tandem Mass Spectrometry detection (LC-MS/MS)
- BS-EN-17550 - Animal feeding stuffs: Methods of sampling and analysis. Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography. UV detection (HPLC-UV)
- BS-EN-17813 - Environmental solid matrices. Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography
- BS-EN-62321-7-2 - Determination of certain substances in electrotechnical products
- BS-EN-62321-8 - Determination of certain substances in electrotechnical products
- BS-ISO-11938 - Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- BS-ISO-13067 - Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS-ISO-14594 - Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
- BS-ISO-14707 - Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
- BS-ISO-16592 - Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
- BS-ISO-19463 - Microbeam analysis. Electron probe microanalyser (EPMA). Guidelines for performing quality assurance procedures
- BS-ISO-20263 - Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
- BS-ISO-22493 - Microbeam analysis. Scanning electron microscopy. Vocabulary
- BS-ISO-23420 - Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- BS-ISO-23692 - Microbeam analysis. Electron probe microanalysis. Quantitative analysis of Mn dendritic segregation in continuously cast steel product
- BS-ISO-23749 - Microbeam analysis. Electron backscatter diffraction. Quantitative determination of austenite in steel
- BS-ISO-24173 - Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
- BS-ISO-24173-TC - Tracked Changes. Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
- BS-ISO-24639 - Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- BS-ISO-25498 - Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
- BS-ISO-25498-TC - Tracked Changes. Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
- BS-ISO-29301-TC - Tracked Changes. Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
- PD-CEN-15968 - Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS
- PD-CEN-17421 - Animal feeding stuffs: Methods of sampling and analysis. Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
- PD-CEN-ISO-23973 - Liquid chromatography at critical conditions (LCCC). Chemical heterogeneity of polyethylene oxides
- PD-ISO-23973 - Liquid chromatography at critical conditions (LCCC). Chemical heterogeneity of polyethylene oxides
IEC:
- IEC-62321-7-2 - Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method
- IEC-62321-8 - Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py-TD-GC-MS)
ISO:
- ISO-11938 - Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- ISO-13067 - Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
- ISO-1392 - Determination of crystallizing point -- General method
- ISO-14594 - Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
- ISO-16592 - Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
- ISO-19214 - Microbeam analysis - Analytical electron microscopy - Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
- ISO-19463 - Microbeam analysis - Electron probe microanalyser (EPMA) - Guidelines for performing quality assurance procedures
- ISO-20263 - Microbeam analysis - Analytical electron microscopy - Method for the determination of interface position in the cross-sectional image of the layered materials
- ISO-2211 - Liquid chemical products -- Measurement of colour in Hazen units (platinum-cobalt scale)
- ISO-23420 - Microbeam analysis - Analytical electron microscopy - Method for the determination of energy resolution for electron energy loss spectrum analysis
- ISO-23692 - Microbeam analysis - Electron probe microanalysis - Quantitative analysis of Mn dendritic segregation in continuously cast steel product
- ISO-23749 - Microbeam analysis - Electron backscatter diffraction - Quantitative determination of austenite in steel
- ISO-23973 - Liquid chromatography at critical conditions (LCCC) - Chemical heterogeneity of polyethylene oxides
- ISO-24173 - Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
- ISO-24639 - Microbeam analysis - Analytical electron microscopy - Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
- ISO-25498 - Microbeam analysis - Analytical electron microscopy - Selected area electron diffraction analysis using a transmission electron microscope
- ISO-6286 - Molecular absorption spectrometry -- Vocabulary -- General -- Apparatus
- ISO-6955 - Analytical spectroscopic methods -- Flame emission, atomic absorption, and atomic fluorescence -- Vocabulary
- ISO-78-3 - Chemistry -- Layouts for standards -- Part 3 : Standard for molecular absorption spectrometry
- ISO-78-4 - Layouts for standards -- Part 4 : Standard for atomic absorption spectrometric analysis
Other SDOs:
- EN-15608 - Surface active agents - Quantitative determination of free fatty acid in alkylamidopropylbetaines - Gas-chromatographic method
- EN-15768 - Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances
- EN-17299 - Animal feeding stuffs - Methods of sampling and analysis - Screening and determination of authorized coccidiostats at additive and 1 % and 3 % cross-contamination level, and of non-registered coccidiostats and of one antibiotic at sub-additive levels, in compound feed with High Performance Liquid Chromatography - Tandem Mass Spectrometry detection (LC-MS/MS)
- EN-62321-7-2 - Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method
- EN-62321-8 - Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
- JIS-K-0061 - Test methods for density and relative density of chemical products
- JIS-K-0114 - General rules for gas chromatography
- JIS-K-0117 - General rules for infrared spectrophotometric analysis
- JIS-K-0119 - General rules for X-ray fluorescence analysis
- JIS-K-0124 - General rules for high performance liquid chromatography
- JIS-K-0126 - General rules for flow analysis
- JIS-K-0127 - General rules for ion chromatography
- JIS-K-0134 - General rules for near-infrared spectrophotometric analysis
- JIS-K-0144 - Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use
- JIS-K-0807 - Ultraviolet photometer for monitoring of water pollution
- SS-EN-15527 - Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
- SS-EN-15768 - Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances
- SS-EN-16877 - Animal feeding stuffs: Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS
- SS-EN-17299 - Animal feeding stuffs: Methods of sampling and analysis - Screening and determination of authorized coccidiostats at additive and 1 % and 3 % cross-contamination levels, and of non-registered coccidiostats and of one antibiotic at sub-additive levels, in compound feed with High Performance Liquid Chromatography - Tandem Mass Spectrometry detection (LC-MS/MS)
- SS-EN-17503 - Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- SS-EN-17550 - Animal feeding stuffs: Methods of sampling and analysis - Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography - UV detection (HPLC-UV)
- SS-EN-17813 - Environmental solid matrices - Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography
- SS-EN-17845 - Construction products: Assessment of release of dangerous substances - Determination of biocide residues using liquid chromatography with mass spectrometric detection (LC-MS/MS)
- SS-EN-ISO-10927 - Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
- SS-ISO-13067 - Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020, IDT)