Document Center List of Standards on Materials For Aluminium Production
ICS Code 71.100.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1494 - Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
- ASTM-D5502 - Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
BSI:
- BS-4140 - Methods of test for aluminium oxide
- BS-4140-0 - Methods of test for aluminium oxide
- BS-4140-11 - Methods of test for aluminium oxide
- BS-4140-12 - Methods of test for aluminium oxide
- BS-4140-14 - Methods of test for aluminium oxide
- BS-4140-16 - Methods of test for aluminium oxide
- BS-4140-2 - Methods of test for aluminium oxide
- BS-4140-21 - Methods of test for aluminium oxide
- BS-4140-22 - Methods of test for aluminium oxide
- BS-4140-3 - Methods of test for aluminium oxide
- BS-4140-5 - Methods of test for aluminium oxide
- BS-4140-6 - Methods of test for aluminium oxide
- BS-4140-7 - Methods of test for aluminium oxide
- BS-4140 ADDENDUM NO2 - Methods of test for aluminium oxide
- BS-6043-1.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch
- BS-6043-1.10 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch
- BS-6043-1.11 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-1.13 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-2.10 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.11 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.13 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2-18 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-2.2 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.20.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy reactivity of calcined coke
- BS-6043-2.21.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air reactivity of calcined coke
- BS-6043-2.3 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke
- BS-6043-2.4 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-2.9 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.1.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.1.2 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.2 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes
- BS-6043-3.3 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.4 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.5.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.6 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.8.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-3.9.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-4.0 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.1 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture
- BS-6043-4.10 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.11 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.12 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.13 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.2 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.3 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.4 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.5 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.6 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.7 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.8 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-6043-4.9 - Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes
- BS-ISO-10143 - Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
- BS-ISO-11706 - Carbonaceous materials for the production of aluminium. Prebaked anodes. Determination of the fracture energy
- BS-ISO-12315 - Aluminium oxide primarily used for production of aluminium. Method for calculating the Al2O3 content of smelter-grade alumina
- BS-ISO-12926 - Aluminium fluoride for industrial use. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
- BS-ISO-12984 - Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
- BS-ISO-12985-1 - Carbonaceous materials used in the production of aluminium. Baked anodes and cathode blocks
- BS-ISO-12985-2 - Carbonaceous materials used in the production of aluminium. Baked anodes and cathode blocks
- BS-ISO-12986-1 - Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks
- BS-ISO-12986-2 - Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks
- BS-ISO-12987 - Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method
- BS-ISO-12988-2 - Carbonaceous materials used in the production of aluminium. Baked anodes. Determination of the reactivity to carbon dioxide
- BS-ISO-14420 - Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion
- BS-ISO-14420-TC - Tracked Changes. Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion
- BS-ISO-14427 - Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test specimens and determination of apparent density after compaction
- BS-ISO-14428 - Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
- BS-ISO-14435 - Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry
- BS-ISO-15379-1 - Carbonaceous materials for the production of aluminium. Cathode block materials
- BS-ISO-15379-2 - Carbonaceous materials for the production of aluminium. Cathode block materials
- BS-ISO-15906 - Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability
- BS-ISO-17499 - Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
- BS-ISO-17499-TC - Tracked Changes. Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
- BS-ISO-17500 - Aluminium oxide used for the production of primary aluminium. Determination of attrition index
- BS-ISO-17544 - Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Determination of rammability of unbaked pastes
- BS-ISO-18142 - Carbonaceous materials for the production of primary aluminium. Baked carbon bodies. Determination of the dynamic elasticity modulus by the resonance method
- BS-ISO-18515 - Carbonaceous materials for the production of aluminium. Cathode blocks and baked anodes. Determination of compressive strength
- BS-ISO-18842 - Aluminium oxide primarily used for the production of aluminium. Method for the determination of tapped and untapped density
- BS-ISO-18843 - Aluminium oxide primarily used for the production of aluminium. Method for the determination of flow time
- BS-ISO-19950 - Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
- BS-ISO-20202 - Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
- BS-ISO-20203 - Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction
- BS-ISO-20292 - Materials for the production of primary aluminium. Dense refractory bricks. Determination of cryolite resistance
- BS-ISO-21687 - Carbonaceous materials used in the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
- BS-ISO-22731 - Carbonaceous materials used in the production of aluminium. Cathode. Cathode abrasion testing
- BS-ISO-23028 - Aluminium oxide primarily used for the production of aluminium. Preparation and storage of test samples
- BS-ISO-23201 - Aluminium oxide primarily used for production of aluminium. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method
- BS-ISO-23202 - Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
- BS-ISO-2926 - Aluminium oxide used for the production of primary aluminium. Particle size analysis for the range 45 m to 150 m. Method using electroformed sieves
- BS-ISO-4443 - Cryolite primarily used for the production of aluminium. Determination of elements. Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets
- BS-ISO-5940-1 - Carbonaceous materials for the production of aluminium. Pitch for electrodes
- BS-ISO-5940-2 - Carbonaceous materials used in the production of aluminium. Pitch for electrodes
- BS-ISO-8005 - Carbonaceous materials used in the production of aluminium. Green and calcined coke. Determination of ash content
- BS-ISO-8007-3 - Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units
- BS-ISO-8008 - Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
- BS-ISO-806 - Aluminium oxide primarily used for the production of aluminium. Determination of loss of mass at 300 C and 1000 C
- PD-ISO-4277 - Cryolite, natural and artificial. Conventional test for evaluation of free fluorides content
ISO:
- ISO-10142 - Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill
- ISO-10143 - Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
- ISO-10236 - Carbonaceous materials for the production of aluminium -- Green coke and calcined coke for electrodes -- Determination of bulk density (tapped)
- ISO-10237 - Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of residual-hydrogen content
- ISO-10238 - Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method
- ISO-11412 - Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of water content
- ISO-11706 - Carbonaceous materials for the production of aluminium - Prebaked anodes - Determination of the fracture energy
- ISO-11713 - Carbonaceous materials used in the production of aluminium -- Cathode blocks and baked anodes -- Determination of electrical resistivity at ambient temperature
- ISO-12315 - Aluminium oxide primarily used for production of aluminium - Method for calculating the Al2O3 content of smelter-grade alumina
- ISO-1232 - Aluminium oxide primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
- ISO-12926 - Aluminium fluoride for industrial use - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
- ISO-12977 - Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content
- ISO-12979 - Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction
- ISO-12980 - Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method
- ISO-12981-1 - Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
- ISO-12982-1 - Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to air -- Part 1: Ignition temperature method
- ISO-12984 - Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
- ISO-12985-1 - Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method
- ISO-12985-2 - Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method
- ISO-12986-1 - Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point method
- ISO-12986-2 - Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method
- ISO-12987 - Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method
- ISO-12988-1 - Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
- ISO-12988-2 - Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method
- ISO-12989-1 - Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 1: Loss in mass method
- ISO-12989-2 - Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method
- ISO-14420 - Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion
- ISO-14422 - Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Methods of sampling
- ISO-14423 - Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
- ISO-14425 - Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of volatile-matter content of unbaked pastes
- ISO-14427 - Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction
- ISO-14428 - Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking
- ISO-14435 - Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry
- ISO-15379-1 - Carbonaceous materials for the production of aluminium - Cathode block materials - Part 1: Determination of the expansion due to sodium penetration with application of pressure
- ISO-15379-2 - Carbonaceous materials for the production of aluminium - Cathode block materials - Part 2: Determination of the expansion due to sodium penetration without application of pressure
- ISO-15906 - Carbonaceous materials for the production of aluminium - Baked anodes - Determination of the air permeability
- ISO-1617 - Aluminium oxide primarily used for the production of aluminium -- Determination of sodium content -- Flame emission spectrophotometric method
- ISO-1618 - Aluminium oxide primarily used for the production of aluminium -- Determination of vanadium content -- N-Benzoyl-N-phenylhydroxylamine photometric method
- ISO-17499 - Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature
- ISO-17500 - Aluminium oxide used for the production of primary aluminium - Determination of attrition index
- ISO-17544 - Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Determination of rammability of unbaked pastes
- ISO-18142 - Carbonaceous materials for the production of primary aluminium - Baked carbon bodies - Determination of the dynamic elasticity modulus by the resonance method
- ISO-18515 - Carbonaceous materials for the production of aluminium - Cathode blocks and baked anodes - Determination of compressive strength
- ISO-18842 - Aluminium oxide primarily used for the production of aluminium - Method for the determination of tapped and untapped density
- ISO-18843 - Aluminium oxide primarily used for the production of aluminium - Method for the determination of flow time
- ISO-19950 - Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
- ISO-20202 - Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
- ISO-20292 - Materials for the production of primary aluminium - Dense refractory bricks - Determination of cryolite resistance
- ISO-2069 - Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content -- Flame atomic absorption method
- ISO-2070 - Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content
- ISO-2071 - Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- Flame atomic absorption method
- ISO-2072 - Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- PAN photometric method
- ISO-2073 - Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by hydrochloric acid attack under pressure
- ISO-21687 - Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
- ISO-22731 - Carbonaceous materials used in the production of aluminium - Cathode - Cathode abrasion testing
- ISO-23028 - Aluminium oxide primarily used for the production of aluminium - Preparation and storage of test samples
- ISO-23201 - Aluminium oxide primarily used for production of aluminium - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method
- ISO-23202 - Aluminium oxide used for the production of aluminium - Determination of particles passing a 20 micrometre aperture sieve
- ISO-2828 - Aluminium oxide primarily used for the production of aluminium -- Determination of fluorine content -- Alizarin complexone and lanthanum chloride spectrophotometric method
- ISO-2829 - Aluminium oxide primarily used for the production of aluminium -- Determination of phosphorus content -- Reduced phosphomolybdate spectrophotometric method
- ISO-2865 - Aluminium oxide primarily used for the production of aluminium -- Determination of boron content -- Curcumin spectrophotometric method
- ISO-2926 - Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 m to 150 m - Method using electroformed sieves
- ISO-2927 - Aluminium oxide primarily used for the production of aluminium -- Sampling
- ISO-2961 - Aluminium oxide primarily used for the production of aluminium -- Determination of an adsorption index
- ISO-3390 - Aluminium oxide primarily used for the production of aluminium -- Determination of manganese content -- Flame atomic absorption method
- ISO-3429 - Sodium fluoride primarily used for the production of aluminium -- Determination of iron content -- 1,10- Phenanthroline photometric method
- ISO-3430 - Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
- ISO-3431 - Sodium fluoride primarily used for the production of aluminium -- Determination of soluble sulphates content -- Turbidimetric method
- ISO-3566 - Sodium fluoride primarily used for the production of aluminium -- Determination of chlorides content -- Turbidimetric method
- ISO-4443 - Cryolite primarily used for the production of aluminium - Determination of elements - Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets
- ISO-5931 - Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method
- ISO-5939 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of water content -- Azeotropic distillation (Dean and Stark) method
- ISO-5940 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of softening point by the ring-and-ball method
- ISO-5940-1 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Part 1: Determination of softening point by the ring-and-ball method
- ISO-5940-2 - Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Part 2: Determination of the softening point (Mettler softening point method)
- ISO-6257 - Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Sampling (available in English only)
- ISO-6375 - Carbonaceous materials for the production of aluminium -- Coke for electrodes -- Sampling
- ISO-6376 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of content of toluene-insoluble material
- ISO-6791 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material
- ISO-6997 - Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of apparent oil content -- Heating method
- ISO-6998 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of coking value
- ISO-6999 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of density -- Pycnometric method
- ISO-8003 - Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity
- ISO-8004 - Carbonaceous materials for the production of aluminium -- Calcined coke and calcined carbon products -- Determination of the density in xylene -- Pyknometric method
- ISO-8005 - Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
- ISO-8006 - Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash
- ISO-8007-1 - Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 1: Cathode blocks
- ISO-8007-2 - Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 2: Prebaked anodes
- ISO-8007-3 - Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks
- ISO-8008 - Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
- ISO-802 - Aluminium oxide primarily used for the production of aluminium -- Preparation and storage of test samples
- ISO-804 - Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by alkaline fusion
- ISO-805 - Aluminium oxide primarily used for the production of aluminium -- Determination of iron content -- 1,10- Phenanthroline photometric method
- ISO-806 - Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 degrees C and 1 000 degrees C
- ISO-8220 - Aluminium oxide primarily used for the production of aluminium -- Determination of the fine particle size distribution (less than 60 mu/m) -- Method using electroformed sieves
- ISO-8658 - Carbonaceous materials for use in the production of aluminium -- Green and calcined coke -- Determination of trace elements by flame atomic absorption spectrometry
- ISO-8723 - Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of oil content -- Method by solvent extraction
- ISO-900 - Aluminium oxide primarily used for the production of aluminium -- Determination of titanium content -- Diantipyrylmethane photometric method
- ISO-901 - Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
- ISO-902 - Aluminium oxide primarily used for the production of aluminium -- Measurement of the angle of repose
- ISO-903 - Aluminium oxide primarily used for the production of aluminium -- Determination of untamped density
- ISO-9055 - Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method
- ISO-9088 - Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method
- ISO-9406 - Carbonaceous materials for the production of aluminium -- Green coke -- Determination of volatile matter content by gravimetric analysis
Other SDOs:
- DIN-ISO-12980 - Carbonaceous Materials Used in the Production of Aluminium - Green Coke & Calcined Cok
- SS-ISO-1232 - Aluminium oxide primarily used for the productionof aluminium - Determination of silica content - Reduced molybdosilicate spectrophotometric method
- SS-ISO-1617 - Aluminium oxide primarily used for the productionof aluminium - Determination of sodium content - Flame emission spectrophotometric method
- SS-ISO-1618 - Aluminium oxide primarily used for the productionof aluminium - Determination of vanadium content - N-Benzoyl-N-phenylhydroxylamine photometric method
- SS-ISO-2069 - Aluminium oxide primarily used for the productionof aluminium - Determination of calcium content -Flame atomic absorption method
- SS-ISO-2071 - Aluminium oxide primarily used for the productionof aluminium - Determination of zinc content - Flame atomic absorption method
- SS-ISO-2072 - Aluminium oxide primarily used for the productionof aluminium - Determination of zinc content - PAN photometric method
- SS-ISO-2073 - Aluminium oxide primarily used for the productionof aluminium - Preparation of solution for analysis - Method by hydrochloric acid attack under pressure
- SS-ISO-2828 - Aluminium oxide primarily used for the productionof aluminium - Determination of fluorine content - Alizarin complexone and lanthanum chloride spectrophotometric method
- SS-ISO-2829 - Aluminium oxide primarily used for the productionof aluminium - Determination of phosphorus content - Reduced phosphomolybdate spectrophotometric method
- SS-ISO-2865 - Aluminium oxide primarily used for the productionof aluminium - Determination of boron content - Curcumin spectrophotometric method
- SS-ISO-2926 - Aluminium oxide primarily used for the productionof aluminium - Particle size analysis - Sieving method
- SS-ISO-2927 - Aluminium oxide primarily used for the productionof aluminium - Sampling
- SS-ISO-2961 - Aluminium oxide primarily used for the productionof aluminium - Determination of an adsorption index
- SS-ISO-3390 - Aluminium oxide primarily used for the productionof aluminium - Determination of manganese content- Flame atomic absorption method
- SS-ISO-5939 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of water content - Azeotropic distillation (Dean and Stark) method
- SS-ISO-5940 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of softening point by the ring-and-ball method
- SS-ISO-6257 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Sampling
- SS-ISO-6375 - Carbonaceous materials for the production of aluminium - Cokes for electrodes - Sampling
- SS-ISO-6376 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of content of toluene-insoluble material
- SS-ISO-6791 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of content of quinoline-insoluble material
- SS-ISO-6997 - Carbonaceous materials for the production of aluminium - Calcined coke - Determination of apparent oil content - Heating method
- SS-ISO-6998 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value
- SS-ISO-6999 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of density - Pycnometric method
- SS-ISO-8003 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Measurement of dynamic viscosity
- SS-ISO-8004 - Carbonanceous materials for the production of aluminium - Calcined coke and calcined carbon products - Determination of the density in xylene - Pycnometric method
- SS-ISO-8005 - Carbonaceous materials for the production of aluminium - Green and calcined coke - Determination ofash content
- SS-ISO-8006 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of ash
- SS-ISO-8007 - Carbonaceous materials for the production of aluminium - Sampling from cathodic blocks and prebakedanodes - General
- SS-ISO-8007-1 - Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks
- SS-ISO-8007-2 - Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes
- SS-ISO-8008 - Aluminium oxide primarily used for the productionof aluminium - Determination of specific surface area by nitrogen adsorption - Single-point method
- SS-ISO-802 - Aluminium oxide primarily used for the productionof aluminium - Preparation and storage of test samples
- SS-ISO-803 - Aluminium oxide primarily used for the productionof aluminium - Determination of loss of mass at 300 degrees Celsius (conventional moisture)
- SS-ISO-804 - Aluminium oxide primarily used for the productionof aluminium - Preparation of solution for analysis - Method by alkaline fusion
- SS-ISO-805 - Aluminium oxide primarily used for the productionof aluminium - Determination of iron content - 1,10-Phenanthroline photometric method
- SS-ISO-806 - Aluminium oxide primarily used for the productionof aluminium - Determination of loss of mass at 1000 degrees Celsius and 1200 degrees Celsius
- SS-ISO-900 - Aluminium oxide primarily used for the productionof aluminium - Determination of titanium content - Diantipyrylmethane photometric method
- SS-ISO-901 - Aluminium oxide primarily used for the productionof aluminium - Determination of absolute density - Pycnometer method
- SS-ISO-902 - Aluminium oxide primarily used for the productionof aluminium - Measurement of the angle of repose
- SS-ISO-903 - Aluminium oxide primarily used for the productionof aluminium - Determination of untamped density
- SS-ISO-9055 - Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of sulfur content by the bomb method
- SS-ISO-9406 - Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis