Document Center List of Standards on Natural Gas
ICS Code 75.060
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1145 - Test Method for Sampling Natural Gas (Withdrawn 1986)
- ASTM-D1945 - Standard Test Method for Analysis of Natural Gas by Gas Chromatography
- ASTM-D1988 - Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D2780 - Standard Test Method for Solubility of Fixed Gases in Liquids (Withdrawn 2010)
- ASTM-D3246 - Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)
- ASTM-D3429 - Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids (Withdrawn 2017)
- ASTM-D4784 - Standard Specification for Liquefied Natural Gas Density Calculation Models
- ASTM-D4810 - Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D4888 - Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM-D4891 - Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
- ASTM-D5954 - Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
- ASTM-D6273 - Standard Test Method for Natural Gas Odor Intensity
- ASTM-D7551 - Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
- ASTM-D7648 - Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
- ASTM-D7663 - Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
- ASTM-D7800 - Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023)
- ASTM-D7904 - Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
- ASTM-D7940 - Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
- ASTM-D8098 - Standard Test Method for Permanent Gases in C
2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
BSI:
- BS-3156-11.0.2 - Quality Designation for Natural Gas
- BS-3156-11.1.1 - Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases. Determination of hydrocarbons to C
- BS-3156-11.1.2 - Determination of Hydrocarbons From Butane (C4) To Hexadecane(C16) by Gas Chromatograph
- BS-3156-11.2.1 - Analysis of Fuel Gases, Methods for Non-Manufactured Gases,Determination of Potential
- BS-3156-11.2.2 - Analysis of Fuel Gases, Methods for Non-Manufactured Gases,Determination of Potential
- BS-3156-11.2.3 - Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content. Volumetric method
- BS-3156-11.4.1 - Analysis of Fuel Gases, Methods for Non-Manufactured Gases, Determination of Sulfur C
- BS-3156-11.4.2 - Analysis of Fuel Gases, Methods for Non-Manufactured Gases, Determination of Sulfur C
- BS-3156-11.4.4 - Analysis of fuel gases. Methods for non-manufactured gases. Determination of sulfur compounds in natural gas
- BS-7678 - Method for Determination of Mercury in Natural Gas
- BS-7859 - Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
- BS-8609 - Natural gas. Calculation of carbon dioxide emission factors from composition
- BS-EN-16726 - Gas infrastructure. Quality of gas. Group H
- BS-EN-ISO-10101-1 - Natural gas. Determination of water by the Karl Fischer method
- BS-EN-ISO-10101-1-TC - Tracked Changes. Natural gas. Determination of water by the Karl Fischer method
- BS-EN-ISO-10101-2 - Natural gas Determination of water by the Karl Fischer method
- BS-EN-ISO-10101-3 - Natural gas. Determination of water by the Karl Fischer method
- BS-EN-ISO-10101-3-TC - Tracked Changes. Natural gas. Determination of water by the Karl Fischer method
- BS-EN-ISO-10723 - Natural gas. Performance evaluation for analytical systems
- BS-EN-ISO-11541 - Natural gas. Determination of water content at high pressure
- BS-EN-ISO-12213-1 - Natural gas. Calculation of compression factor
- BS-EN-ISO-12213-2 - Natural gas. Calculation of compression factor
- BS-EN-ISO-12213-3 - Natural gas. Calculation of compression factor
- BS-EN-ISO-13443 - Natural gas. Standard reference conditions
- BS-EN-ISO-13686 - Natural gas. Quality designation
- BS-EN-ISO-13734 - Natural gas. Organic components used as odorants. Requirements and test methods
- BS-EN-ISO-14111 - Natural gas. Guidelines to traceability in analysis
- BS-EN-ISO-14532 - Natural gas. Vocabulary
- BS-EN-ISO-14532-TC - Tracked Changes. Natural gas. Vocabulary
- BS-EN-ISO-15112 - Natural gas. Energy determination
- BS-EN-ISO-15112-TC - Tracked Changes. Natural gas. Energy determination
- BS-EN-ISO-15403-1 - Natural gas. Natural gas for use as a compressed fuel for vehicles
- BS-EN-ISO-15970 - Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
- BS-EN-ISO-15971 - Natural gas. Measurement of properties. Calorific value and Wobbe index
- BS-EN-ISO-16960 - Natural gas. Determination of sulfur compounds. Determination of total sulfur by oxidative microcoulometry method
- BS-EN-ISO-18453 - Natural gas. Correlation between water content and water dew point
- BS-EN-ISO-19739 - Natural gas. Determination of sulfur compounds using gas chromatography
- BS-EN-ISO-20765-1 - Natural gas. Calculation of thermodynamic properties
- BS-EN-ISO-20765-5 - Natural gas. Calculation of thermodynamic properties
- BS-EN-ISO-23874 - Natural gas. Gas chromatographic requirements for hydrocarbon dewpoint calculation
- BS-EN-ISO-2612 - Analysis of natural gas. Biomethane. Determination of ammonia content by tuneable diode laser absorption spectroscopy
- BS-EN-ISO-2613-1 - Analysis of natural gas. Silicon content of biomethane
- BS-EN-ISO-2613-2 - Analysis of natural gas. Silicon content of biomethane
- BS-EN-ISO-2614 - Analysis of natural gas. Biomethane. Determination of terpenes' content by micro gas chromatography
- BS-EN-ISO-6326-1 - Natural gas. Determination of sulfur compounds
- BS-EN-ISO-6327 - Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygrometers
- BS-EN-ISO-6974-1 - Natural gas. Determination of composition and associated uncertainty by gas chromatography
- BS-EN-ISO-6974-2 - Natural gas. Determination of composition and associated uncertainty by gas chromatography
- BS-EN-ISO-6974-3 - Natural gas. Determination of composition and associated uncertainty by gas chromatography
- BS-EN-ISO-6974-3-TC - Tracked Changes. Natural gas. Determination of composition and associated uncertainty by gas chromatography
- BS-EN-ISO-6974-4 - Natural gas. Determination of composition with defined uncertainty by gas chromatography
- BS-EN-ISO-6974-5 - Natural gas. Determination of composition and associated uncertainty by gas chromatography
- BS-EN-ISO-6974-6 - Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
- BS-EN-ISO-6975 - Natural gas. Extended analysis. Gas chromatographic method
- BS-EN-ISO-6976 - Natural gas. Calculation of calorific values, density, relative density and Wobbe indices from composition
- BS-EN-ISO-6976-TC - Tracked Changes. Natural gas. Calculation of calorific values, density, relative density and Wobbe indices from composition
- BS-EN-ISO-6978-1 - Natural gas. Determination of mercury
- BS-EN-ISO-6978-2 - Natural gas. Determination of mercury
- BS-ISO-12213-3 - Part 3: Calculation Using Measured Physical Properties, Natural Gas, Calculation of C
- BS-ISO-15112 - Natural gas. Energy determination
- BS-ISO-15970 - Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
- BS-ISO-15971 - Natural gas. Measurement of properties. Calorific value and Wobbe index
- BS-ISO-16922 - Natural gas. Guidelines for odorizing gases
- BS-ISO-20676 - Natural gas. Upstream area. Determination of hydrogen sulfide content by laser absorption spectroscopy
- BS-ISO-20729 - Natural gas. Determination of sulfur compounds. Determination of total sulfur content by ultraviolet fluorescence method
- BS-ISO-20765-1 - Natural gas. Calculation of thermodynamic properties. Gas phase properties for transmission and distribution applications
- BS-ISO-23219 - Natural gas. Format for data from gas chromatograph analysers for natural gas. XML File Format
- BS-ISO-23874 - Natural gas. Gas chromatographic requirements for hydrocarbon dewpoint calculation
- BS-ISO-23978 - Natural gas. Upstream area. Determination of composition by Laser Raman spectroscopy
- BS-ISO-6974-6 - Natural Gas, Determination of Composition With Defined Uncertainty by Gas Chromatograp
- BS-ISO-6978-2 - Natural Gas, Determination of Mercury, Sampling of Mercury by Amalgamation on Gold/Pla
- BS-ISO-7055 - Natural gas. Upstream area. Determination of drag reduction in laboratory for slick water
- BS-ISO-8943 - Refrigerated light hydrocarbon fluids. Sampling of liquefied natural gas. Continuous and intermittent methods
- PD-CEN-ISO-24094 - Analysis of natural gas. Validation methods for gaseous reference materials
- PD-CEN-ISO-2610 - Analysis of natural gas. Biomethane. Determination of amines content
- PD-ISO-11150 - Natural gas. Hydrocarbon dew point and hydrocarbon content
- PD-ISO-12148 - Natural gas. Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
- PD-ISO-12748 - Natural Gas. Wet gas flow measurement in natural gas operations
- PD-ISO-16922 - Natural gas. Odorization
- PD-ISO-17910 - Natural gas. Coal-based synthetic natural gas quality designation and the applicability of ISO/TC 193 standards
- PD-ISO-22302 - Natural gas. Calculation of methane number
- PD-ISO-2610 - Analysis of natural gas. Biomethane. Determination of amines content
- PD-ISO-26762 - Natural gas. Upstream area. Allocation of gas and condensate
- PD-ISO-29922 - Natural gas. Supporting information on the calculation of physical properties according to ISO 6976
- PD-ISO-7262 - Natural gas. Coalbed methane quality designation and the applicability of ISO/TC 193 current standards
ISO:
- ISO-10101-1 - Natural gas - Determination of water by the Karl Fischer method - Part 1: General requirements
- ISO-10101-2 - Natural gas - Determination of water by the Karl Fischer method - Part 2: Volumetric procedure
- ISO-10101-3 - Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure
- ISO-10715 - Natural gas - Gas sampling
- ISO-10723 - Natural gas - Performance evaluation for analytical systems
- ISO-11150 - Natural gas - Hydrocarbon dew point and hydrocarbon content
- ISO-11541 - Natural gas -- Determination of water content at high pressure
- ISO-12148 - Natural gas - Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
- ISO-12213-1 - Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
- ISO-12213-2 - Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis
- ISO-12213-3 - Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
- ISO-12748 - Natural Gas - Wet gas flow measurement in natural gas operations
- ISO-13443 - Natural gas -- Standard reference conditions
- ISO-13686 - Natural gas - Quality designation
- ISO-13734 - Natural gas - Organic components used as odorants - Requirements and test methods
- ISO-14111 - Natural gas -- Guidelines to traceability in analysis
- ISO-14532 - Natural gas - Vocabulary
- ISO-14749 - Natural gas - Online gas chromatograph for upstream area
- ISO-15112 - Natural gas - Energy determination
- ISO-15403 - Natural gas -- Designation of the quality of natural gas for use as a compressed fuel for vehicles
- ISO-15403-1 - Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
- ISO-15403-2 - Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 2: Specification of the quality
- ISO-15970 - Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
- ISO-15971 - Natural gas - Measurement of properties - Calorific value and Wobbe index
- ISO-16922 - Natural gas - Odorization
- ISO-16960 - Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method
- ISO-18453 - Natural gas - Correlation between water content and water dew point
- ISO-19739 - Natural gas - Determination of sulfur compounds using gas chromatography
- ISO-20676 - Natural gas - Upstream area - Determination of hydrogen sulfide content by laser absorption spectroscopy
- ISO-20729 - Natural gas - Determination of sulfur compounds - Determination of total sulfur content by ultraviolet fluorescence method
- ISO-20765-1 - Natural gas - Calculation of thermodynamic properties - Part 1: Gas phase properties for transmission and distribution applications
- ISO-20765-2 - Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
- ISO-20765-5 - Natural gas - Calculation of thermodynamic properties - Part 5: Calculation of viscosity, Joule-Thomson coefficient, and isentropic exponent
- ISO-22302 - Natural gas - Calculation of methane number
- ISO-23219 - Natural gas - Format for data from gas chromatograph analysers for natural gas - XML file format
- ISO-23874 - Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation
- ISO-23978 - Natural gas - Upstream area - Determination of composition by Laser Raman spectroscopy
- ISO-24094 - Analysis of natural gas - Validation methods for gaseous reference materials
- ISO-2610 - Analysis of natural gas - Biomethane - Determination of amines content
- ISO-2612 - Analysis of natural gas - Biomethane - Determination of ammonia content by tuneable diode laser absorption spectroscopy
- ISO-2613-1 - Analysis of natural gas - Silicon content of biomethane - Part 1: Determination of total silicon by atomic emission spectroscopy (AES)
- ISO-2613-2 - Analysis of natural gas - Silicon content of biomethane - Part 2: Determination of siloxane content by gas chromatography with ion mobility spectrometry
- ISO-2614 - Analysis of natural gas - Biomethane - Determination of terpenes content by micro gas chromatography
- ISO-2620 - Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors
- ISO-26762 - Natural gas - Upstream area - Allocation of gas and condensate
- ISO-29922 - Natural gas - Supporting information on the calculation of physical properties according to ISO 6976
- ISO-6326-1 - Natural gas - Determination of sulfur compounds - Part 1: General introduction
- ISO-6326-3 - Natural gas -- Determination of sulfur compounds -- Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry
- ISO-6326-5 - Natural gas -- Determination of sulfur compounds -- Part 5: Lingener combustion method
- ISO-6327 - Gas analysis -- Determination of the water dew point of natural gas -- Cooled surface condensation hygrometers
- ISO-6570 - Natural gas -- Determination of potential hydrocarbon liquid content -- Gravimetric methods
- ISO-6974-1 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition
- ISO-6974-2 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations
- ISO-6974-3 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precision and bias
- ISO-6974-4 - Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
- ISO-6974-5 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons
- ISO-6974-6 - Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
- ISO-6975 - Natural gas -- Extended analysis -- Gas-chromatographic method
- ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
- ISO-6978-1 - Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine
- ISO-6978-2 - Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
- ISO-7055 - Natural gas - Upstream area - Determination of drag reduction in laboratory for slick water
- ISO-7262 - Natural gas - Coalbed methane quality designation and the applicability of ISO/TC 193 current standards
- ISO-8943 - Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous and intermittent methods
Other SDOs:
- DIN-EN-ISO-10723 - Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
- DIN-EN-ISO-12213-1 - Part 1: Introduction & Guidelines, Natural Gas - Calculation of Compression Factor
- DIN-EN-ISO-12213-2 - Part 2: Calculation Using Molar-Composition Analysis, Natural Gas - Calculation of Com
- DIN-EN-ISO-12213-3 - Part 3: Calculation Using Physical Properties, Natural Gas - Calculation of Compressio
- DIN-EN-ISO-18453 - Natural Gas - Correlation Between Water Content & Water Dew Point
- DIN-EN-ISO-19739 - Natural Gas - Determination of Sulfur Compounds Using Gas Chromatography
- DIN-EN-ISO-6570 - Natural Gas, Determination of Potential Hydrocarbon Liquid Content - Gravimetric Metho
- DIN-EN-ISO-6974-1 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
- DIN-EN-ISO-6974-2 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
- DIN-EN-ISO-6974-6 - Part 6: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide & C1 To C8
- DIN-EN-ISO-6975 - Natural Gas, Extended Analysis, Gas-Chromatographic Method
- DIN-EN-ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
- DIN-EN-ISO-6978-1 - Part 1: Sampling of Mercury by Chemisorption on Iodine, Natural Gas, Determination Of
- DIN-EN-ISO-6978-2 - Part 2: Sampling of Mercury by Amalgamation on Gold/Platinum Alloy, Natural Gas, Deter
- EN-16726 - Gas infrastructure - Quality of gas - Group H
- EN-ISO-10101-1 - Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993)
- EN-ISO-10101-2 - Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993)
- EN-ISO-10101-3 - Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993)
- EN-ISO-10723 - Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
- EN-ISO-12213-1 - Part 1: Introduction & Guidelines, Natural Gas - Calculation of Compression Factor
- EN-ISO-12213-2 - Part 2: Calculation Using Molar-Composition Analysis, Natural Gas - Calculation of Com
- EN-ISO-12213-3 - Part 3: Calculation Using Physical Properties, Natural Gas - Calculation of Compressio
- EN-ISO-13686 - Natural gas - Quality designation (ISO 13686:2013)
- EN-ISO-13734 - Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)
- EN-ISO-14532 - Natural gas - Vocabulary
- EN-ISO-15112 - Natural gas - Energy determination (ISO 15112:2011)
- EN-ISO-15403 - Natural gas -- Designation of the quality of natural gas for use as a compressed fuel for vehicles
- EN-ISO-15403-1 - Part 1: Designation of the Quality, Natural Gas - Natural Gas for Use as a Compressed
- EN-ISO-15970 - Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
- EN-ISO-15971 - Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
- EN-ISO-16960 - Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method
- EN-ISO-18453 - Natural Gas, Correlation Between Water Content & Water Dew Point
- EN-ISO-19739 - Natural Gas - Determination of Sulfur Compounds Using Gas Chromatography
- EN-ISO-20765-1 - Natural gas - Calculation of thermodynamic properties - Part 1: Gas phase properties for transmission and distribution applications
- EN-ISO-20765-2 - Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015)
- EN-ISO-23874 - Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation (ISO 23874:2006)
- EN-ISO-6326-1 - Natural Gas, Determination of Sulfur Compounds, General Introduction
- EN-ISO-6327 - Gas Analysis, Determination of the Water Dew Point of Natural Gas, Cooled Surface Cond
- EN-ISO-6570 - Natural Gas, Determination of Potential Hydrocarbon Liquid Content - Gravimetric Metho
- EN-ISO-6974-1 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
- EN-ISO-6974-2 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
- EN-ISO-6974-5 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)
- EN-ISO-6974-6 - Part 6: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide & C1 To C8
- EN-ISO-6975 - Natural Gas, Extended Analysis, Gas-Chromatographic Method
- EN-ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
- EN-ISO-6978-1 - Part 1: Sampling of Mercury by Chemisorption on Iodine, Natural Gas, Determination Of
- EN-ISO-6978-2 - Natural Gas, Determination of Mercury, Sampling of Mercury by Amalgamation on Gold/Pla
- JIS-K-2301 - Fuel Gases & Natural Gas - Methods for Chemical Analysis & Testing
- SIS-CEN-ISO/TS-2610 - Analysis of natural gas - Biomethane - Determination of amines content (ISO/TS 2610:2022)
- SIS-ISO/TS-16922 - Natural gas Odorization (ISO/TS 16922:2022, IDT)
- SS-EN-1160 - Installation and equipment for liquefied natural gas - General characteristics of liquefied naturalgas
- SS-EN-12308 - Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
- SS-EN-12838 - Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
- SS-EN-1473 - Installation and equipment for liquefied natural gas - Design of onshore installations
- SS-EN-16726 - Gas infrastructure - Quality of gas - Group H
- SS-EN-ISO-10101-1 - Natural gas - Determination of water by the Karl Fischer method - Part 1: General requirements (ISO 10101-1:2022)
- SS-EN-ISO-10101-2 - Natural gas - Determination of water by the Karl Fischer method - Part 2: Volumetric procedure (ISO 10101-2:2022)
- SS-EN-ISO-10101-3 - Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:2022)
- SS-EN-ISO-10715 - Natural gas - Gas sampling (ISO 10715:2022)
- SS-EN-ISO-10723 - Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
- SS-EN-ISO-11541 - Natural gas - Determination of water content at high pressure (ISO 11541:1997)
- SS-EN-ISO-12213-1 - Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:2006)
- SS-EN-ISO-12213-2 - Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)
- SS-EN-ISO-12213-3 - Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
- SS-EN-ISO-13443 - Natural gas - Standard reference conditions (ISO 13443:1996 incl Cor 1:1997)
- SS-EN-ISO-13686 - Natural gas - Quality designation (ISO 13686:2013)
- SS-EN-ISO-13734 - Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)
- SS-EN-ISO-14111 - Natural gas - Guidelines to traceability in alalysis (ISO 14111:1997)
- SS-EN-ISO-14532 - Natural gas - Vocabulary (ISO 14532:2014,IDT)
- SS-EN-ISO-15112 - Natural gas - Energy determination (ISO 15112:2018)
- SS-EN-ISO-1516 - Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
- SS-EN-ISO-1523 - Determination of flash-point - Closed cup equilibrium method (ISO 1523:2002)
- SS-EN-ISO-15403-1 - Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
- SS-EN-ISO-15970 - Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
- SS-EN-ISO-15971 - Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
- SS-EN-ISO-16903 - Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015)
- SS-EN-ISO-16960 - Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method (ISO 16960:2014)
- SS-EN-ISO-18453 - Natural gas - Correlation between water content and water dew point (ISO 18453:2004)
- SS-EN-ISO-19739 - Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004)
- SS-EN-ISO-20257-1 - Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 1: General requirements (ISO 20257-1:2020)
- SS-EN-ISO-20765-1 - Natural gas - Calculation of thermodynamic properties - Part 1: Gas phase properties for transmission and distribution applications (ISO 20765-1:2005)
- SS-EN-ISO-20765-2 - Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015)
- SS-EN-ISO-20765-5 - Natural gas - Calculation of thermodynamic properties - Part 5: Calculation of viscosity, Joule-Thomson coefficient, and isentropic exponent (ISO 20765-5:2022)
- SS-EN-ISO-23874 - Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation (ISO 23874:2006)
- SS-EN-ISO-2613-2 - Analysis of natural gas - Silicon content of biomethane - Part 2: Determination of siloxane content by gas chromatography with ion mobility spectrometry (ISO 2613-2:2023)
- SS-EN-ISO-2614 - Analysis of natural gas - Biomethane - Determination of terpenes' content by micro gas chromatography (ISO 2614:2023)
- SS-EN-ISO-6326-1 - Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007)
- SS-EN-ISO-6326-3 - Natural gas - Determination of sulfur compounds -Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989)
- SS-EN-ISO-6326-5 - Natural gas - Determination of sulfur compounds -Part 5: Lingener combustion method (ISO 6326-5:1989)
- SS-EN-ISO-6327 - Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981)
- SS-EN-ISO-6570 - Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods (ISO 6570:2001)
- SS-EN-ISO-6974-1 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
- SS-EN-ISO-6974-2 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
- SS-EN-ISO-6974-3 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precision and bias (ISO 6974-3:2018)
- SS-EN-ISO-6974-4 - Natural gas - Determination of composition with defined uncertainty by gas chromtography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two packed columns (ISO 6974-4:2000)
- SS-EN-ISO-6974-5 - Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)
- SS-EN-ISO-6974-6 - Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)
- SS-EN-ISO-6975 - Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997)
- SS-EN-ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
- SS-EN-ISO-6978-1 - Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003)
- SS-EN-ISO-6978-2 - Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy (ISO 6978-2:2003)
- SS-ISO-10101-1 - Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction
- SS-ISO-10101-2 - Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure
- SS-ISO-10101-3 - Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure
- SS-ISO-10715 - Natural gas - Sampling guidelines
- SS-ISO-11541 - Natural gas - Determination of water content at high pressure
- SS-ISO-12213-1 - Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
- SS-ISO-12213-2 - Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis
- SS-ISO-12213-3 - Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
- SS-ISO-13443 - Natural gas - Standard reference conditions
- SS-ISO-14111 - Natural gas - Guidelines to traceability in analysis
- SS-ISO-18453 - Natural gas - Correlation between water content and water dew point (ISO 18453:2004, IDT)
- SS-ISO-6974-6 - Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2003, IDT)
- SS-ISO-6975 - Natural gas - Extended analysis - Gas-chromatographic method
- SS-ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995/Cor 3:1999, IDT)
- SS-ISO-8943 - Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous method