Document Center List of Standards on Steel Profiles Including Sections
ICS Code 77.140.70
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1 - Standard Specification for Carbon Steel Tee Rails
- ASTM-A1075 - Standard Specification for Flanged Steel U-Channel Posts
- ASTM-A120 - Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless for Ordinary Uses (Withdrawn 1987)
- ASTM-A2 - Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
- ASTM-A276 - Standard Specification for Stainless Steel Bars and Shapes
- ASTM-A3 - Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
- ASTM-A328 - Standard Specification for Steel Sheet Piling
- ASTM-A499 - Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
- ASTM-A564 - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- ASTM-A629 - Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications (Withdrawn 2004)
- ASTM-A761 - Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- ASTM-A769 - Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
- ASTM-A783 - Specification for Aluminum-Zinc-Alloy-Coated Steel Chain Link Fence Fabric (Withdrawn 1986)
- ASTM-A784 - Specification for Aluminum-Zinc Alloy-Coated Steel Wire Rope and Fittings for Highway Guard Rail (Withdrawn 1987)
- ASTM-A785 - Specification for Aluminum-Zinc Alloy-Coated Wire Strand (Withdrawn 1987)
- ASTM-A797 - Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1988)
- ASTM-A850 - Specification for Steel Bars, Carbon Manganese Merchang Quality with 50 KSI (345 MPA) Yield Point (Withdrawn 1990)
- ASTM-A857 - Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
- ASTM-A913 - Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
- ASTM-F573 - Specification for Residential Zinc-Coated Steel Chain-Link Fence Fabric (Withdrawn 1993)
BSI:
- BS-227 - Specification for H-section steel arches for use in mines
- BS-2853 - Specification for the testing of steel overhead runway beams for hoist blocks
- BS-4-1 - Structural steel sections
- BS-4848-4 - Hot-rolled structural steel sections. Equal and unequal angles
- BS-6497 - Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and preformed sheet coated with powder organic coatings
- BS-EN-10056-1 - Structural steel equal and unequal leg angles
- BS-EN-10162 - Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
- BS-EN-10163-3 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections
- BS-EN-10164 - Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
- BS-EN-10164-TC - Tracked Changes. Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
- BS-EN-10248-1-TC - Tracked Changes. Hot-rolled steel sheet piles
- BS-EN-10279 - Hot rolled steel channels. Tolerances on shape, dimension and mass
- BS-EN-10365 - Hot rolled steel channels, I and H sections. Dimensions and masses
- BS-EN-14195 - Metal framing components for gypsum board systems. Definitions, requirements and test methods
- BS-ISO-630-6 - Structural steels
ISO:
- ISO-20723 - Structural steels - Surface condition of hot-rolled sections - Delivery requirements
- ISO-24314 - Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions
- ISO-4951-1 - High yield strength steel bars and sections -- Part 1: General delivery requirements
- ISO-4951-2 - High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
- ISO-4951-3 - High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels
- ISO-630 - Structural Steels - Plates, Wide Flats, Bars, Sections & Profiles
- ISO-630-6 - Structural steels - Part 6: Technical delivery conditions for seismic-proof improved structural steels for building
- ISO-657-1 - Hot-rolled steel sections - Part 1: Equal-leg angles - Dimensions
- ISO-657-11 - Hot-rolled steel sections - Part 11 : Sloping flange channel sections (Metric series) - Dimensions and sectional properties
- ISO-657-15 - Hot-rolled steel sections - Part 15 : Sloping flange beam sections (Metric series) - Dimensions and sectional properties
- ISO-657-16 - Hot-rolled steel sections - Part 16 : Sloping flange column sections (metric series) - Dimensions and sectional properties
- ISO-657-18 - Hot-rolled steel sections - Part 18 : L sections for shipbuilding (metric series) - Dimensions, sectional properties and tolerances
- ISO-657-19 - Hot-rolled steel sections - Part 19 : Bulb flats (metric series) - Dimensions, sectional properties and tolerances
- ISO-657-2 - Hot-rolled steel sections - Part 2: Unequal-leg angles - Dimensions
- ISO-657-21 - Hot-rolled steel sections - Part 21 : T-sections with equal depth and flange width - Dimensions
- ISO-657-5 - Hot-rolled steel sections - Part 5: Equal-leg angles and unequal-leg angles - Tolerances for metric and inch series
- ISO-7452 - Hot-rolled steel plates - Tolerances on dimensions and shape
Other SDOs:
- DIN-1022 - Steel bars - Hot-rolled square root equal angles (LS-steel) - Dimensions, masses and tolerances
- DIN-1026-2 - Hot rolled steel channels - Part 2: Parallel flange steel channels; Dimensions, masses and sectional properties
- DIN-1027 - Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
- DIN-EN-10163-1 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements; German version EN 10163-1:2004
- DIN-EN-10163-3 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections; German version EN 10163-3:2004
- DIN-EN-10164 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions; German version EN 10164:2004
- DIN-EN-10306 - Iron & Steel - Ultrasonic Testing of H Beams With Parallel Flanges & Ipe Beams, Englis
- DIN-EN-14195 - Metal framing components for gypsum board systems - Definitions, requirements and test methods; German version EN 14195:2014
- EN-10056-1 - Structural steel equal and unequal leg angles - Part 1: Dimensions
- EN-10088-5 - Part 5: Technical Delivery Conditions for Bars, Rods, Wire, Sections and Bright Product
- EN-10163-3 - Part 3: Sections, Delivery Requirements for Surface Condition of Hot Rolled Steel Plat
- EN-10164 - Steel Products With Improved Deformation Properties Perpendicular To the Surface of Th
- EN-10365 - Hot rolled steel channels, I and H sections - Dimensions and masses
- EN-14195 - Metal framing components for gypsum board systems - Definitions, requirements and test methods
- JIS-A-5523 - Weldable hot rolled steel sheet piles
- JIS-A-5528 - Hot rolled steel sheet piles
- JIS-G-3353 - Welded light gauge steel H sections for general structure
- JIS-G-4053-AM1 - Low-alloyed steels for machine structural use (Amendment 1) (Foreign Standard)
- MNC-525 - St+l - Formvaror - R"r - Tversikt
- SS-212715 - Hot-rolled shipbuilding steel angles
- SS-212721 - Hot-rolled steel wide flange T-bars
- SS-EN-10016-1 - Non-alloy steel rod for drawing and/or cold rolling - Part 1:General requirements
- SS-EN-10016-2 - Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod
- SS-EN-10016-3 - Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod
- SS-EN-10016-4 - Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications
- SS-EN-10024 - Hot rolled taper flange sections - Tolerances on shape and dimensions
- SS-EN-10034 - Structural steel I and H sections - Tolerances onshape and dimensions
- SS-EN-10055 - Hot-rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shapeand dimensions
- SS-EN-10056-1 - Structural steel equal and unequal leg angles - Part 1: Dimensions
- SS-EN-10056-2 - Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
- SS-EN-10113-1 - Hot-rolled products in weldable fine grain structural steels - Part 1: General delivery conditions
- SS-EN-10162 - Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
- SS-EN-10163-1 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
- SS-EN-10164 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
- SS-EN-10210-1 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- SS-EN-10210-2 - Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
- SS-EN-10210-3 - Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
- SS-EN-10214 - Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions
- SS-EN-10215 - Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions
- SS-EN-10218-1 - Steel wire and wire products - General - Part 1: Test methods
- SS-EN-10218-2 - Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
- SS-EN-10219-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- SS-EN-10219-2 - Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
- SS-EN-10219-3 - Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
- SS-EN-10238 - Automatically blast-cleaned and automatically prefabrication primed structural steel products
- SS-EN-10244-1 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
- SS-EN-10244-2 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
- SS-EN-10244-3 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings
- SS-EN-10244-4 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings
- SS-EN-10244-5 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings
- SS-EN-10244-6 - Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings
- SS-EN-10245-1 - Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
- SS-EN-10245-2 - Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
- SS-EN-10245-3 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
- SS-EN-10245-4 - Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
- SS-EN-10245-5 - Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
- SS-EN-10248-1 - Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
- SS-EN-10248-2 - Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
- SS-EN-10249-1 - Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
- SS-EN-10249-2 - Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
- SS-EN-10257-1 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
- SS-EN-10257-2 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables
- SS-EN-10279 - Hot rolled steel channels - Tolerances on shape, dimensions and mass
- SS-EN-10306 - Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
- SS-EN-10365 - Hot rolled steel channels, I and H sections - Dimensions and masses
- SS-EN-12945 - Liming materials - Determination of neutralizing value - Titrimetric methods
- SS-EN-14195 - Metal framing components for gypsum board systems - Definitions, requirements and test methods
- SS-EN-ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
- SS-EN-ISO-16120-1 - Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)
- SS-EN-ISO-16120-2 - Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO 16120-2:2017)
- SS-EN-ISO-16120-3 - Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)
- SS-EN-ISO-16120-4 - Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2017)
- SS-ENV-10220 - Seamless and welded steel tubes - Dimensions and massses per unit length
- SS-ISO-245 - Aerospace - Lockwire - Diameters