Document Center List of Standards on Fibre And Particle Boards
ICS Code 79.060.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1713 - Test Method for Bonding Permanency of Water-or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing Top Flaps of Fiberboard Specimens (Withdrawn 1990)
- ASTM-D1714 - Test Method for Water Absorptiveness of Fiberboard Specimens for Adhesives (Withdrawn 1990)
- ASTM-D2277 - Specification for Fiberboard Nai-Base Sheathing (Withdrawn 1992)
- ASTM-D2830 - Standard Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products (Withdrawn 2004)
- ASTM-D5516 - Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
- ASTM-D5722 - Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
- ASTM-D7519 - Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting (Withdrawn 2020)
- ASTM-D781 - Method of Test for Puncture and Stiffness of Paperboard, Corrugated and Solid Fiberboard (Withdrawn 1984)
- ASTM-E1333 - Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
BSI:
- BS-1142 - Specification for fibre building boards
- BS-5669 - Specification for wood chipboard and methods of test for particle board
- BS-5669-1 - Particleboard. Methods of sampling, conditioning and test
- BS-5669-2 - Particleboard, Specification for Wood Chipboard
- BS-5669-3 - Particleboard, Specification for Oriented Strand Board (Osb)
- BS-5669-4 - Particleboard, Specification for Cement Bonded Particleboard
- BS-5881 - Method for determination of grammage of single layers of solid fibreboard
- BS-7331 - Specification for Direct Surfaced Wood Chipboard Based on Thermosetting Resins
- BS-EN-12369-1 - Wood-based panels. Characteristic values for structural design
- BS-EN-14279 - Laminated veneer lumber (LVL). Definitions, classification and specifications
- BS-EN-14322-TC - Tracked Changes. Wood-based panels. Melamine faced boards for interior uses. Definition, requirements and classification
- BS-EN-14323-TC - Tracked Changes. Wood-based panels. Melamine faced boards for interior uses. Test methods
- BS-EN-14755 - Extruded particleboards. Specifications
- BS-EN-15197 - Wood-based panels. Flaxboards. Specifications
- BS-EN-300 - Oriented strand boards (OSB). Definitions, classification and specifications
- BS-EN-309 - Particleboards. Definition and classification
- BS-EN-312 - Particleboards. Specifications
- BS-EN-316 - Wood fibre boards. Definition, classification and symbols
- BS-EN-321 - Wood-based panels. Determination of moisture resistance under cyclic test conditions
- BS-EN-622-1 - Fibreboards. Specifications
- BS-EN-622-2 - Fibreboards. Specifications
- BS-EN-622-3 - Fibreboards. Specifications
- BS-EN-622-4 - Fibreboards. Specifications
- BS-EN-622-4-TC - Tracked Changes. Fibreboards. Specifications
- BS-EN-622-5 - Fibreboards. Specifications
- BS-EN-634-2 - Cement-bonded particleboards. Specifications
- PD-CEN-16368 - Lightweight Particleboards. Specifications
ISO:
- ISO-11235 - Rubber compounding ingredients - Sulfenamide accelerators - Test methods
- ISO-16893 - Wood-based panels - Particleboard
- ISO-16893-1 - Wood-based panels - Particleboard - Part 1: Classifications
- ISO-16893-2 - Wood-based panels - Particleboard - Part 2: Requirements
- ISO-16894 - Wood-based panels - Oriented strand board (OSB) - Definitions, classification and specifications
- ISO-16895 - Wood-based panels - Dry-process fibreboard
- ISO-16895-1 - Wood-based panels - Dry-process fibreboard - Part 1: Classifications
- ISO-16895-2 - Wood-based panels - Dry-process fibreboard - Part 2: Requirements
- ISO-17064 - Wood-based panels - Fibreboard, particleboard and oriented strand board (OSB) - Vocabulary
- ISO-2695 - Fibre building boards -- Hard and medium boards for general purposes -- Quality specifications -- Appearance, shape and dimensional tolerances
- ISO-2696 - Fibre building boards -- Hard and medium boards for general purposes -- Quality specifications -- Water absorption and swelling in thickness
- ISO-27769 - Wood-based panels - Wet process fibreboard
- ISO-27769-1 - Wood-based panels - Wet-process fibreboard - Part 1: Classifications
- ISO-27769-2 - Wood-based panels - Wet-process fibreboard - Part 2: Requirements
- ISO-3340 - Fibre building boards -- Determination of sand content
- ISO-3546 - Fibre building boards -- Determination of surface finish (roughness)
- ISO-3729 - Fibre building boards -- Determination of surface stability
- ISO-769 - Fibre building boards -- Hard and medium boards -- Determination of water absorption and of swelling in thickness after immersion in water
Other SDOs:
- DIN-52367 - Wood-based panels - Determination of shear strength parallel to the surface
- DIN-EN-14279 - Laminated Veneer Lumber (Lvl) - Definitions, Classification & Specifications
- DIN-EN-14322 - Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification; German version EN 14322:2017
- DIN-EN-14323 - Wood-based panels - Melamine faced boards for interior uses - Test methods; German version EN 14323:2017
- DIN-EN-14755 - Extruded Particleboards - Specifications
- DIN-EN-15197 - Wood-Based Panels - Flaxboards - Specifications
- DIN-EN-300 - Oriented Strand Boards (Osb) - Definitions, Classification & Specifications
- DIN-EN-309 - Particleboards, Definition & Classification
- DIN-EN-312 - Particleboards - Specifications
- DIN-EN-622-2 - Part 2: Requirements for Hardboard, Fibreboard - Specifications
- DIN-EN-622-5 - Part 5: Requirements for Dry Process Boards (Mdf), Fibreboards - Specifications
- DIN-EN-634-2 - Part 2: Requirements for Opc Bonded Particleboards for Use in Dry, Humid & External Co
- EN-14279 - Laminated Veneer Lumber (Lvl) - Definitions, Classification & Specifications
- EN-14322 - Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
- EN-14323 - Wood-based panels - Melamine faced boards for interior uses - Test methods
- EN-14755 - Extruded Particleboards - Specifications
- EN-15197 - Wood-Based Panels - Flaxboards, Specifications
- EN-300 - Oriented Strand Boards (Osb), Definitions, Classification & Specifications
- EN-309 - Particleboards, Definition & Classification
- EN-312 - Particleboards - Specifications
- EN-316 - Wood Fibre Boards, Definition, Classification & Symbols
- EN-320 - Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
- EN-622-2 - Part 2: Requirements for Hardboard, Fibreboard - Specifications
- EN-622-4 - Fibreboards, Specifications, Requirements for Softboards
- EN-622-5 - Fibreboards, Specifications, Requirements for Dry Process Boards (Mdf)
- EN-634-2 - Cement-Bonded Particleboards, Specifications, Requirements for Opc Bonded Particleboar
- SIS-235113 - Fibre building boards - Testing
- SS-EN-1087-1 - Particleboards - Determination of moisture resistance - Part 1: Boil test
- SS-EN-1128 - Cement-bonded particleboards - Determination of hard body impact resistance
- SS-EN-12369-1 - Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
- SS-EN-1328 - Cement bonded particleboards - Determination of frost resistance
- SS-EN-13381-1 - Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
- SS-EN-13986 - Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
- SS-EN-14279 - Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
- SS-EN-14322 - Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
- SS-EN-14323 - Wood-based panels - Melamine faced boards for interior uses - Test methods
- SS-EN-14755 - Extruded particleboards - Specifications
- SS-EN-15197 - Wood-based panels - Flaxboards - Specifications
- SS-EN-300 - Oriented Strand Boards (OSB) - Definitions, classification and specifications
- SS-EN-309 - Particleboards - Definitions and classification
- SS-EN-311 - Wood-based panels - Surface soundness - Test method
- SS-EN-312 - Particleboards - Specifications
- SS-EN-312-1 - Particleboards - Specifications - Part 1: Generalrequirements
- SS-EN-312-2 - Particleboards - Specifications - Part 2: Requirements for general purpose boards for use in dry conditions
- SS-EN-312-3 - Particleboards - Specifications - Part 3: Requirements for boards for interior fitments (including furniture) for use in dry conditions
- SS-EN-312-4 - Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in dry conditions
- SS-EN-312-5 - Particleboards - Specifications - Part 5: Requirements for load-bearing boards for use in humid conditions
- SS-EN-312-6 - Particleboards - Specifications - Part 6: Requirements for heavy duty load-bearing boards for use in dry conditions
- SS-EN-312-7 - Particleboards - Specifications - Part 7: Requirements for heavy duty load-bearing boards for use in humid conditions
- SS-EN-316 - Wood fibre boards - Definition, classification and symbols
- SS-EN-317 - Particleboards and fibreboards - Determination ofswelling in thickness after immersion in water
- SS-EN-318 - Wood-based panels - Determination of dimensional changes associated with changes in relative humidity
- SS-EN-319 - Particleboards and fibreboards - Determination oftensile strength perpendicular to the plane of the board
- SS-EN-320 - Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
- SS-EN-321 - Wood-based panels - Determination of moisture resistance under cyclic test conditions
- SS-EN-322 - Wood-based panels - Determination of moisture content
- SS-EN-323 - Wood-based panels - Determination of density
- SS-EN-324-1 - Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
- SS-EN-324-2 - Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness andedge straightness
- SS-EN-326-1 - Woodbased-panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
- SS-EN-382-1 - Fibreboards - Determination of surface absorption- Part 1: Test method for dry process fibreboards
- SS-EN-382-2 - Fibreboards - Determination of surface absorption- Part 2: Test methods for hardboards
- SS-EN-622-1 - Fibreboards - Specifications - Part 1: General requirements
- SS-EN-622-2 - Fibreboards - Specifications - Part 2: Requirements for hardboards
- SS-EN-622-3 - Fibreboards - Specifications - Part 3: Requirements for medium boards
- SS-EN-622-4 - Fibreboards - Specifications - Part 4: Requirements for softboards
- SS-EN-622-5 - Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
- SS-EN-633 - Cementbonded particleboards - Definition and classification
- SS-EN-634-1 - Cementbonded particleboards - Specifications - Part 1: General requirements
- SS-EN-634-2 - Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
- SS-EN-717-2 - Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
- SS-EN-ISO-12460-3 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
- SS-EN-ISO-7197 - Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006, including Cor 1:2007)
- SS-ISO-3648 - Aviation fuels - Estimation of net specific energy