Document Center List of Standards on Rubber Raw Rubber, See 83.040.10
ICS Code 83.060
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1250 - Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes (Withdrawn 2015)
- ASTM-C1518 - Standard Specification for Precured Elastomeric Silicone Joint Sealants
- ASTM-C1521 - Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
- ASTM-C1522 - Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
- ASTM-C1523 - Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM-C603 - Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
- ASTM-C661 - Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
- ASTM-C679 - Standard Test Method for Tack-Free Time of Elastomeric Sealants
- ASTM-C792 - Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM-C793 - Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM-C794 - Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
- ASTM-C898 - Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
- ASTM-C910 - Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
- ASTM-C957 - Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
- ASTM-D1025 - Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
- ASTM-D1052 - Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
- ASTM-D1053 - Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
- ASTM-D1054 - Standard Test Method for Rubber Property-Resilience Using a Rebound Pendulum
- ASTM-D1056 - Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM-D1148 - Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM-D1149 - Standard Test Methods for Rubber Deterioration - Cracking in an Ozone Controlled Environment
- ASTM-D1171 - Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
- ASTM-D1229 - Standard Test Method for Rubber Property—Compression Set at Low Temperatures
- ASTM-D1329 - Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
- ASTM-D1349 - Standard Practice for Rubber—Standard Conditions for Testing
- ASTM-D1415 - Standard Test Method for Rubber Property—International Hardness
- ASTM-D1416 - Test Methods for Rubber from Synthetic Sources--Chemical Analysis (Withdrawn 1996)
- ASTM-D1418 - Standard Practice for Rubber and Rubber Latices—Nomenclature
- ASTM-D1456 - Standard Test Method for Rubber Property—Elongation at Specific Stress
- ASTM-D1460 - Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
- ASTM-D150 - Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM-D1566 - Standard Terminology Relating to Rubber
- ASTM-D1630 - Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
- ASTM-D1646 - Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
- ASTM-D1870 - Practice for Elevated Temperature Aging Using a Tubular Oven (Withdrawn 1998)
- ASTM-D1871 - Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023)
- ASTM-D1872 - Method of Testing Rubber Chemical-Free 2-Mercaptobenzothiazole in Benzothiazyl Disulfide (Withdrawn 1989)
- ASTM-D1873 - Method of Testing Rubber Chemical--Total 2-Mercaptobenzothiazole in Benzothiazyl Disulfide (Withdrawn 1989)
- ASTM-D1917 - Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
- ASTM-D1939 - Practice for Determining Residual Stresses in Extruded or Molded Acrylonitrile-Butadiene-Styrene (ABS) Parts by Immersion in Glacial Acetic Acid (Withdrawn 1999)
- ASTM-D2000 - Standard Classification System for Rubber Products in Automotive Applications
- ASTM-D2084 - Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
- ASTM-D2135 - Classification of Hard Rubber Materials (Withdrawn 1987)
- ASTM-D2228 - Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
- ASTM-D2229 - Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023)
- ASTM-D2230 - Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
- ASTM-D2231 - Standard Practice for Rubber Properties in Forced Vibration (Withdrawn 1998)
- ASTM-D2240 - Standard Test Method for Rubber Property—Durometer Hardness
- ASTM-D2433 - Standard Test Methods for Rubber Thread (Withdrawn 2012)
- ASTM-D2632 - Standard Test Method for Rubber Property—Resilience by Vertical Rebound
- ASTM-D2707 - Test Method for Hard Rubber in Tension (Withdrawn 1987)
- ASTM-D297 - Standard Test Methods for Rubber Products—Chemical Analysis
- ASTM-D2993 - Standard Specification for Acrylonitrile-Butadiene Rubberized Tar (Withdrawn 2003)
- ASTM-D2994 - Standard Test Methods for Rubberized Tar (Withdrawn 2000)
- ASTM-D3040 - Practice for Preparing Precision Statements for Standards Related to Rubber and Rubber Testing (Withdrawn 1987)
- ASTM-D3041 - Method of Testing Coated Fabrics-Ozone Cracking in a Chamber (Withdrawn 1987)
- ASTM-D3137 - Standard Test Method for Rubber Property—Hydrolytic Stability
- ASTM-D3182 - Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
- ASTM-D3183 - Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
- ASTM-D3185 - Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
- ASTM-D3186 - Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
- ASTM-D3187 - Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
- ASTM-D3188 - Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)
- ASTM-D3189 - Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
- ASTM-D3190 - Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
- ASTM-D3314 - Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM-D3346 - Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
- ASTM-D3388 - Method of Testing Coated Fabrics-Stiffening at Low Temperatures (Torsional Wire Apparatus) (Withdrawn 1984)
- ASTM-D3395 - Standard Test Methods for Rubber Deterioration-Dynamic Ozone Cracking in a Chamber (Withdrawn 2007)
- ASTM-D3403 - Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
- ASTM-D3452 - Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
- ASTM-D3484 - Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
- ASTM-D3491 - Standard Test Methods for Vulcanizable Rubber Tank and Pipe Lining (Withdrawn 1996)
- ASTM-D3533 - Standard Test Method for Rubber-Nitrogen Content (Withdrawn 2006)
- ASTM-D3566 - Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
- ASTM-D3568 - Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
- ASTM-D3629 - Standard Test Method for Rubber Property-Cut Growth Resistance (Withdrawn 2005)
- ASTM-D3677 - Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry
- ASTM-D3767 - Standard Practice for Rubber—Measurement of Dimensions
- ASTM-D378 - Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
- ASTM-D3847 - Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
- ASTM-D3848 - Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
- ASTM-D3853 - Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
- ASTM-D3854 - Standard Test Method for Rubber Thread-Resistance to Dry Heat (Withdrawn 2016)
- ASTM-D3855 - Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment (Withdrawn 2016)
- ASTM-D3896 - Standard Practice for Rubber From Synthetic Sources—Sampling
- ASTM-D395 - Standard Test Methods for Rubber Property - Compression Set
- ASTM-D3958 - Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
- ASTM-D4004 - Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
- ASTM-D4026 - Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
- ASTM-D412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension
- ASTM-D413 - Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
- ASTM-D4205 - Guide for For Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Withdrawn 1997)
- ASTM-D429 - Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
- ASTM-D430 - Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
- ASTM-D4322 - Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
- ASTM-D4474 - Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)
- ASTM-D4482 - Test Method for Rubber Property
- ASTM-D4483 - Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
- ASTM-D454 - Standard Test Method for Rubber Deterioration by Heat and Air Pressure
- ASTM-D4550 - Standard Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (Withdrawn 2004)
- ASTM-D4570 - Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
- ASTM-D4572 - Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
- ASTM-D4575 - Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
- ASTM-D4620 - Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
- ASTM-D4637 - Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM-D4678 - Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
- ASTM-D4679 - Standard Specification for Rubber General Purpose, Household or Beautician Gloves
- ASTM-D471 - Standard Test Method for Rubber Property—Effect of Liquids
- ASTM-D4758 - Standard Test Method for Nonvolatile Content of Latexes (Withdrawn 2007)
- ASTM-D4811 - Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
- ASTM-D5021 - Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)
- ASTM-D5044 - Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
- ASTM-D5046 - Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000)
- ASTM-D5051 - Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
- ASTM-D5054 - Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay (Withdrawn 2018)
- ASTM-D5099 - Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
- ASTM-D5132 - Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
- ASTM-D518 - Standard Test Method for Rubber Deterioration-Surface Cracking (Withdrawn 2008)
- ASTM-D5289 - Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
- ASTM-D531 - Standard Test Method for Rubber Property—Pusey and Jones Indentation
- ASTM-D5406 - Standard Practice for Rubber—Calculation of Producer's Process Performance Indexes
- ASTM-D5508 - Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
- ASTM-D5568 - Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
- ASTM-D5603 - Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber
- ASTM-D5605 - Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values
- ASTM-D5644 - Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM-D5667 - Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash
- ASTM-D5668 - Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
- ASTM-D5669 - Standard Test Method for Rubber-Evaluation of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Curemeter Testing (Withdrawn 2000)
- ASTM-D5670 - Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
- ASTM-D572 - Standard Test Method for Rubber—Deterioration by Heat and Oxygen
- ASTM-D573 - Standard Test Method for Rubber—Deterioration in an Air Oven
- ASTM-D575 - Standard Test Methods for Rubber Properties in Compression
- ASTM-D5774 - Standard Test Methods for Rubber—Chemical Analysis of Extractables
- ASTM-D5775 - Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
- ASTM-D5805 - Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches
- ASTM-D5902 - Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
- ASTM-D5963 - Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
- ASTM-D5992 - Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
- ASTM-D6047 - Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
- ASTM-D623 - Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
- ASTM-D624 - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM-D6284 - Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM-D6370 - Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
- ASTM-D6411 - Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
- ASTM-D6601 - Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM-D6740 - Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition - ASTM-D6741 - Standard Test Methods for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content - ASTM-D6814 - Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
- ASTM-D6909 - Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
- ASTM-D7050 - Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties
- ASTM-D7121 - Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
- ASTM-D7427 - Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
- ASTM-D746 - Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
- ASTM-D750 - Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
- ASTM-D7602 - Standard Practice for Installation of Vulcanized Rubber Linings
- ASTM-D7850 - Standard Specification for Biological Properties of Industry Reference Materials (IRM)
- ASTM-D7999 - Standard Classification for Rubber Products in Natural Gas Pipeline Applications
- ASTM-D8059 - Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
- ASTM-D8115 - Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
- ASTM-D813 - Standard Test Method for Rubber Deterioration—Crack Growth
- ASTM-D814 - Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids
- ASTM-D816 - Standard Test Methods for Rubber Cements
- ASTM-D865 - Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
- ASTM-D925 - Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
- ASTM-D926 - Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
- ASTM-D945 - Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
- ASTM-D991 - Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
- ASTM-ES27 - Practice for Rubber-Establishing Replacement Immersion Reference Oils for ASTM No. 2 and No. 3 Imersion Oils as Used in D-471 ( Withdrawn 1995)
- ASTM-F2523 - Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
- ASTM-F3012 - Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
- ASTM-F604 - Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001)
BSI:
- BS-1154 - Natural rubber compounds. Specification
- BS-1155 - Natural rubber compounds for extrusion. Specification
- BS-1672 - Methods of testing natural rubber latices
- BS-1673-3 - Methods of testing raw rubber and unvulcanized compounded rubber. Methods of physical testing
- BS-1673-9 - Methods of test for raw rubber and unvulcanized compounded rubber. Chemical analysis of butadiene rubber
- BS-2044 - Methods for Determination of Resistivity of Conductive and Antistatic Plastics and Rub
- BS-2050 - Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material
- BS-2751 - General purpose acrylonitrile-butadiene rubber compounds. Specification
- BS-2752 - Chloroprene rubber compounds. Specification
- BS-2782-3-M-365A - Method-365a: Determination of Softness Number of Flexible Plastics Materials
- BS-3227 - Butyl rubber compounds (including halobutyl compounds). Specification
- BS-3397 - Methods of test for synthetic rubber latices
- BS-3502-2 - Symbols for plastics and rubber materialsSchedule for symbols for rubbers
- BS-3558 - Glossary of rubber terms
- BS-3558-1 - Glossary of rubber terms. International terms
- BS-3558-2 - Glossary of rubber terms
- BS-4181-1 - Method for Identification of Hydrocarbon, Chloroprene, Nitrile & Chlorosulphonated Pol
- BS-4255-1 - Rubber used in preformed gaskets for weather exclusion from buildings
- BS-4470 - Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)
- BS-5176 - Classification system for vulcanized rubbers. Specification
- BS-5294 - Method of test. Determination of crystallization effects in rubbers by hardness measurements
- BS-5421-1 - Methods of test for elastomeric threads. Rubber threads
- BS-5563 - Method for evaluation of styrene-butadiene rubber (SBR) masterbatches with carbon black or carbon black and oil
- BS-5923-2 - Methods for chemical analysis of rubber
- BS-6014 - Ethylene propylene rubber compounds. Specification
- BS-6057-3-3.1 - Rubber latices. Methods of test. Determination of mechanical stability of natural rubber latex concentrate
- BS-6057-3-3.7 - Rubber latices. Methods of test. Determination of density of natural rubber latices
- BS-6057-3.5 - Rubber latices. Methods of test
- BS-6057-3.9 - Rubber laticesDetermination of pH
- BS-6996 - Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
- BS-7164-10 - Chemical tests for raw and vulcanized rubber. Method for preparation and examination of water extract
- BS-7164-11.1 - Chemical tests for raw and vulcanized rubber. Butadiene rubber. Method for determination of microstructure
- BS-7164-13 - Chemical tests for raw and vulcanized rubber. Method for determination of total hydrocarbon content
- BS-7164-22.1 - Chemical tests for raw and vulcanized rubber. Determination of chlorine content
- BS-7164-24 - Chemical tests for raw and vulcanized rubber. Determination of free sulfur
- BS-7164-26.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Atomic absorption spectrometry
- BS-7164-26-26.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Atomic absorption spectrometry
- BS-7164-28.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of copper content
- BS-7164-30.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of lead content
- BS-7164-31.1 - Chemical Tests for Raw & Vulcanized Rubber, Determination of Anti-Degradants, High-per
- BS-7164-6.1 - Section 6.1: Raw Rubber, Part 6: Methods for Determination of Volatile Matter, Chemica
- BS-7164-8 - Chemical tests for raw and vulcanized rubber
- BS-7918-1 - Visual imperfections in rubber products
- BS-903-0 - Physical testing of rubber
- BS-903-1 - Physical testing of rubber. Guide to the selection and use of methods of test for rubber
- BS-903-2 - Guide To the Application of Statistics To Rubber Testing
- BS-903-3 - Physical Testing of Rubber, Acquisition & Presentation of Comparable Single-Point Data
- BS-903-4 - Physical Testing of Rubber, Acquisition & Presentation of Comparable Multi-Point Data
- BS-903-A1 - Part a1: Determination of Density, Physical Testing of Rubber
- BS-903-A13 - Physical testing of rubber. Method for determination of stiffness at low temperature (Gehman test)
- BS-903-A14 - Method for Determination of Modulus in Shear or Adhesion To Rigid Plates, Quadruple S
- BS-903-A15 - Physical testing of rubber. Method for determination of creep in compression or shear
- BS-903-A18 - Physical testing of rubber. Determination of equilibrium water vapour absorption
- BS-903-A2 - Part a2: Method for Determination of Tensile Stress-Strain Properties, Physical Testing Of
- BS-903-A21 - Physical testing of rubber. Determination of rubber to metal bond strength
- BS-903-A21.1 - Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90-¦ peel method
- BS-903-A21.2 - Two Plate Method
- BS-903-A25 - Determination of Low-Temperature Brittleness
- BS-903-A26 - Part a26: Method for Determination of Hardness (Hardness Between 10 Irhd & 100 Irhd), Phys
- BS-903-A27 - Physical testing of rubber
- BS-903-A29 - Physical testing of rubber
- BS-903-A3 - Physical testing of rubber
- BS-903-A30 - Physical testing of rubber. Determination of permeability to gases
- BS-903-A31 - Determination of the Low-Frequency Dynamic Properties of Rubbers by Means of a Torsion
- BS-903-A32 - Physical testing of rubber
- BS-903-A3.2 - Physical testing of rubber. Determination of tear strength
- BS-903-A35 - Physical testing of rubber
- BS-903-A36 - Physical testing of rubber
- BS-903-A37 - Physical testing of rubber
- BS-903-A38 - Methods for the Determination of Dimensions of Test Pieces and Products for Test Purpo
- BS-903-A4 - Physical Testing of Rubber, Determination of Compression Stress-Strain Properties
- BS-903-A40 - Determination of Adhesion To Rigid Materials Using Conical Shaped Parts
- BS-903-A42 - Physical testing of rubberMethod for determination of stress relaxation in compression at ambient and at elevated temperatures
- BS-903-A43 - Physical testing of rubber. Method for determination of resistance to ozone cracking (static strain test)
- BS-903-A44 - Physical testing of rubber. Method of determination of resistance to ozone cracking (dynamic strain test)
- BS-903-A47 - Physical testing of rubber. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- BS-903-A48 - Determination of Static Adhesion To Textile Cord (H-Pull Test)
- BS-903-A49 - Determination of Temperature Rise & Resistance To Fatigue in Flexometer Testing (Ba
- BS-903-A50 - Determination of Temperature Rise and Resistance To Fatiguein Flexometer Testing (Com
- BS-903-A51 - Determination of Resistance To Tension Fatigue
- BS-903-A52 - Determination of Ageing Characteristics by Measurement of Stress at a Given Elongation
- BS-903-A56 - Determination of Adhesion To Wire Cord
- BS-903-A58 - Physical testing of rubber. Methods using the Mooney viscometer
- BS-903-A58.1 - Physical testing of rubber. Methods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR
- BS-903-A59 - Physical Testing of Rubber, Methods Using Plastimeters, Determination of the Rapid Pla
- BS-903-A59.1 - Determination of the Rapid Plasticity Number
- BS-903-A6 - Physical testing of rubber. Method for determination of compression set at ambient, elevated or low temperatures
- BS-903-A60.1 - Physical testing of rubber. Curemetering. Guide to the use of curemeters
- BS-903-A60.2 - Method for the Determination of Vulcanization Characteristics Using an Oscillating Dis
- BS-903-A62 - Method for Determination of Green Strength of Raw Rubber of Unvulcanized Compounds
- BS-903-A63 - Physical testing of rubber. Method for determination of crystallization effects by hardness measurements
- BS-903-A64 - Method for the Preparation, Mixing and Vulcanization of Rubber Test Mixes
- BS-903-A8 - Method for Determination of Rebound Resilience
- BS-903-A9 - Methods of testing vulcanized rubber
- BS-903-B11&B12 - Physical testing of rubber. Rubber (polymer) determinations
- BS-903-C1 - Determination of Surface Resistivity
- BS-903-C2 - Determination of Volume Resistivity
- BS-903-C4 - Physical testing of rubber
- BS-903-C5 - Physical testing of rubber
- BS-EN-681-1 - Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications
- BS-EN-ISO-75-2 - Plastics. Determination of temperature of deflection under load
- BS-ISO-11345 - Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods
- BS-ISO-11346 - Rubber, vulcanized or thermoplastic. Estimation of life-time and maximum temperature of use
- BS-ISO-11346-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Estimation of life-time and maximum temperature of use
- BS-ISO-12000 - Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
- BS-ISO-12493 - Rubber, vulcanized. Determination of stress in tension upon heating
- BS-ISO-12493-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of stress in tension under non-isothermal condition
- BS-ISO-12965 - Butadiene rubber. Determination of microstructure by infra-red spectrometry
- BS-ISO-13145 - Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
- BS-ISO-132 - Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
- BS-ISO-13226 - Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- BS-ISO-13226-TC - Tracked Changes. Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- BS-ISO-132-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
- BS-ISO-1382 - Rubber. Vocabulary
- BS-ISO-1407 - Rubber. Determination of solvent extract
- BS-ISO-1407-TC - Tracked Changes. Rubber. Determination of solvent extract
- BS-ISO-14309 - Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
- BS-ISO-1431-1 - Rubber, vulcanized or thermoplastic. Resistance to ozone cracking
- BS-ISO-1431-1-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking
- BS-ISO-1431-3 - Rubber, vulcanized or thermoplastic. Resistance to ozone cracking
- BS-ISO-1431-3-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking
- BS-ISO-1432 - Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
- BS-ISO-1434 - Natural rubber in bales. Amount of bale coating. Determination
- BS-ISO-14558 - Rubber. Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
- BS-ISO-15113 - Rubber. Determination of frictional properties
- BS-ISO-15671 - Rubber and rubber products. Determination of total sulfur content using an automatic analyser
- BS-ISO-15671-TC - Tracked Changes. Rubber and rubber products. Determination of total sulfur content using an automatic analyser
- BS-ISO-15672 - Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser
- BS-ISO-1629 - Rubber and latices. Nomenclature
- BS-ISO-16565 - Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers
- BS-ISO-1658 - Natural rubber (NR) - Evaluation procedure
- BS-ISO-1658-TC - Tracked Changes. Natural rubber (NR). Evaluation procedure
- BS-ISO-17257 - Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection
- BS-ISO-17257-TC - Tracked Changes. Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection
- BS-ISO-17564 - Raw hydrogenated nitrile rubber (HNBR). Determination of residual unsaturation by iodine value
- BS-ISO-1817 - Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
- BS-ISO-1817-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
- BS-ISO-1827 - Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
- BS-ISO-1827-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
- BS-ISO-18517 - Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
- BS-ISO-1853 - Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
- BS-ISO-1853-TC - Tracked Changes. Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
- BS-ISO-18766 - Rubber, vulcanized or thermoplastic. Low temperature testing. General introduction and guide
- BS-ISO-188 - Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
- BS-ISO-18898 - Rubber. Calibration and verification of hardness testers
- BS-ISO-18899 - Rubber. Guide to the calibration of test equipment
- BS-ISO-188-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
- BS-ISO-19003 - Rubber and rubber products. Guidance on the application of statistics to physical testing
- BS-ISO-19050-TC - Tracked Changes. Rubber, raw, vulcanized. Determination of metal content by ICP-OES
- BS-ISO-19051 - Rubber, raw natural, and rubber latex, natural. Determination of nitrogen content by Micro Dumas combustion method
- BS-ISO-19242 - Rubber. Determination of total sulfur content by ion chromatography
- BS-ISO-19242-TC - Tracked Changes. Rubber. Determination of total sulfur content by ion chromatography
- BS-ISO-19983 - Rubber. Determination of precision of test methods
- BS-ISO-19983-TC - Tracked Changes. Rubber. Determination of precision of test methods
- BS-ISO-19984-1 - Rubber and rubber products. Determination of biobased content
- BS-ISO-19984-2 - Rubber and rubber products. Determination of biobased content
- BS-ISO-19984-3 - Rubber and rubber products. Determination of biobased content
- BS-ISO-2007 - Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method
- BS-ISO-2007-TC - Tracked Changes. Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method
- BS-ISO-20163 - Vulcanized rubber. Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- BS-ISO-20463 - Rubber and rubber products. Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials
- BS-ISO-21490 - Rubber and rubber products. Determination of 2-mercaptobenzothiazole content by high performance liquid chromatography (HPLC)
- BS-ISO-21561 - Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
- BS-ISO-21561-1 - Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
- BS-ISO-21561-2 - Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
- BS-ISO-2230 - Rubber products. Guidelines for storage
- BS-ISO-22640 - Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- BS-ISO-22640-TC - Tracked Changes. Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- BS-ISO-22768 - Raw rubber and rubber latex. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- BS-ISO-2285 - Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
- BS-ISO-2302 - Isobutene-isoprene rubber (IIR). Evaluation procedure
- BS-ISO-2303 - Isoprene rubber (IR). Non-oil-extended, solution-polymerized types. Evaluation procedures
- BS-ISO-23075 - Vulcanized rubbers. Determination of antidegradants by high-performance liquid chromatography
- BS-ISO-2322 - Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
- BS-ISO-2322-TC - Tracked Changes. Styrene-butadiene rubber (SBR). Emulsion and solution-polymerized types. Evaluation procedures
- BS-ISO-23337 - Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine
- BS-ISO-23337-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine
- BS-ISO-23508 - Solution-polymerized SBR. Evaluation methods of viscoelastic properties
- BS-ISO-23529 - Rubber. General procedures for preparing and conditioning test pieces for physical test methods
- BS-ISO-23529-TC - Tracked Changes. Rubber. General procedures for preparing and conditioning test pieces for physical test methods
- BS-ISO-23794 - Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
- BS-ISO-23794-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
- BS-ISO-2393 - Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
- BS-ISO-24087 - Rubber, vulcanized. Determination of the glass transition temperature and enthalpy by differential scanning calorimetry
- BS-ISO-24329 - Low-protein natural rubber latex concentrate. Specification
- BS-ISO-24453 - Rubber. Acquisition and presentation of comparable single-point data
- BS-ISO-24454 - Rubber. Acquisition and presentation of comparable multi-point data
- BS-ISO-24483 - Epoxidized natural rubber. Specifications
- BS-ISO-2453 - Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
- BS-ISO-247 - Rubber. Determination of ash
- BS-ISO-247-1 - Rubber. Determination of ash
- BS-ISO-247-1-TC - Tracked Changes. Rubber. Determination of ash
- BS-ISO-247-2 - Rubber. Determination of ash
- BS-ISO-2475 - Chloroprene rubber (CR). General-purpose types. Evaluation procedure
- BS-ISO-2476 - Butadiene rubber (BR). Solution-polymerized types. Evaluation procedures
- BS-ISO-249 - Rubber, raw natural. Determination of dirt content
- BS-ISO-27588 - Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
- BS-ISO-27727 - Rubber, vulcanized. Measurement of fatigue crack growth rate
- BS-ISO-2781 - Rubber, vulcanized or thermoplastic. Determination of density
- BS-ISO-2781-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of density
- BS-ISO-2782 - Rubber, vulcanized or thermoplastic. Determination of permeability to gases
- BS-ISO-2782-1 - Rubber, vulcanized or thermoplastic. Determination of permeability to gases
- BS-ISO-2782-1-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of permeability to gases
- BS-ISO-2782-2 - Rubber, vulcanized or thermoplastic. Determination of permeability to gases
- BS-ISO-2782-2-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of permeability to gases
- BS-ISO-2878 - Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance
- BS-ISO-2878-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance
- BS-ISO-289-1 - Rubber, unvulcanized. Determinations using a shearing-disc viscometer
- BS-ISO-289-1-TC - Tracked Changes. Rubber, unvulcanized. Determinations using a shearing-disc viscometer
- BS-ISO-289-2 - Rubber, unvulcanized. Determinations using a shearing-disc viscometer
- BS-ISO-289-3 - Rubber, unvulcanized. Determinations using a shearing-disc viscometer
- BS-ISO-289-4 - Rubber, unvulcanized. Determinations using a shearing-disc viscometer
- BS-ISO-2921 - Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
- BS-ISO-3384 - Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
- BS-ISO-3384-1 - Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression
- BS-ISO-3384-1-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression
- BS-ISO-3384-2 - Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression
- BS-ISO-3387 - Rubber. Determination of crystallization effects by hardness measurements
- BS-ISO-34-1 - Rubber, vulcanized or thermoplastic - Determination of tear strength
- BS-ISO-3417 - Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter
- BS-ISO-34-1-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tear strength
- BS-ISO-34-2 - Rubber, vulcanized or thermoplastic. Determination of tear strength
- BS-ISO-34-2-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tear strength
- BS-ISO-36 - Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
- BS-ISO-37 - Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
- BS-ISO-37-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
- BS-ISO-3865 - Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
- BS-ISO-4097 - Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
- BS-ISO-4645 - Rubber and rubber products Identification of antidegradants Thin layer chromatographic methods
- BS-ISO-4647-TC - Tracked Changes. Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
- BS-ISO-4649 - Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
- BS-ISO-4649-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
- BS-ISO-4650 - Rubber. Identification. Infrared spectrometric methods
- BS-ISO-4658 - Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
- BS-ISO-4659 - Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
- BS-ISO-4661-2 - Rubber, vulcanized. Preparation of samples and test pieces
- BS-ISO-4662 - Rubber, vulcanized or thermoplastic. Determination of rebound resilience
- BS-ISO-4664 - Rubber - Guide To the Determination of Dynamic Properties
- BS-ISO-4664-1 - Rubber, vulcanized or thermoplastic. Determination of dynamic properties
- BS-ISO-4664-1-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of dynamic properties
- BS-ISO-4664-2 - Rubber, vulcanized or thermoplastic. Determination of dynamic properties
- BS-ISO-4664-3 - Rubber, vulcanized or thermoplastic. Determination of dynamic properties
- BS-ISO-4665 - Rubber, vulcanized or thermoplastic. Resistance to weathering
- BS-ISO-4665-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to weathering
- BS-ISO-4666-3 - Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing
- BS-ISO-4666-3-TC - Tracked Changes. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing
- BS-ISO-4666-4 - Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing
- BS-ISO-4666-4-TC - Tracked Changes. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing
- BS-ISO-48 - Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- BS-ISO-48-1 - Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-1-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-2 - Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-3 - Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-3-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-4-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-5 - Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-9 - Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-48-9-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness
- BS-ISO-5260 - Epoxidized natural rubber. Determination of epoxidation and ring opening level by NMR spectrometry
- BS-ISO-5600 - Rubber. Determination of adhesion to rigid materials using conical shaped parts
- BS-ISO-5600-TC - Tracked Changes. Rubber. Determination of adhesion to rigid materials using conical shaped parts
- BS-ISO-5603 - Rubber, vulcanized. Determination of adhesion to wire cord
- BS-ISO-5603-TC - Tracked Changes. Rubber, vulcanized. Determination of adhesion to wire cord
- BS-ISO-6101-1 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6101-2 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6101-3 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6101-3-TC - Tracked Changes. Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6101-4 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6101-5 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6101-6 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6133 - Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- BS-ISO-6133-TC - Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- BS-ISO-6502 - Rubber. Guide to the use of curemeters
- BS-ISO-6502-1 - Rubber. Measurement of vulcanization characteristics using curemeters
- BS-ISO-6502-1-TC - Tracked Changes. Rubber. Measurement of vulcanization characteristics using curemeters
- BS-ISO-6502-2 - Rubber. Measurement of vulcanization characteristics using curemeters
- BS-ISO-6502-2-TC - Tracked Changes. Rubber. Measurement of vulcanization characteristics using curemeters
- BS-ISO-6502-3 - Rubber. Measurement of vulcanization characteristics using curemeters
- BS-ISO-6502-3-TC - Tracked Changes. Rubber. Measurement of vulcanization characteristics using curemeters
- BS-ISO-6505 - Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
- BS-ISO-6505-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
- BS-ISO-6914 - Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
- BS-ISO-6914-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
- BS-ISO-6943 - Rubber, vulcanized. Determination of tension fatigue
- BS-ISO-6943-TC - Tracked Changes. Rubber, vulcanized. Determination of tension fatigue
- BS-ISO-7270-1 - Rubber. Analysis by pyrolytic gas-chromatographic methods
- BS-ISO-7270-2 - Rubber. Analysis by pyrolytic gas-chromatographic methods
- BS-ISO-7619-1 - Rubber, vulcanized or thermoplastic. Determination of indentation hardness
- BS-ISO-7619-2 - Rubber, vulcanized or thermoplastic. Determination of indentation hardness
- BS-ISO-7663 - Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures
- BS-ISO-7743 - Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
- BS-ISO-7743-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
- BS-ISO-8013 - Rubber, vulcanized. Determination of creep in compression or shear
- BS-ISO-812 - Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
- BS-ISO-812-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
- BS-ISO-813 - Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90 peel method
- BS-ISO-813-2 - Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate
- BS-ISO-814 - Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
- BS-ISO-814-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
- BS-ISO-815-1 - Rubber, vulcanized or thermoplastic. Determination of compression set
- BS-ISO-815-2 - Rubber, vulcanized or thermoplastic. Determination of compression set
- BS-ISO-9026 - Raw rubber or unvulcanized compounds. Determination of green strength
- BS-ISO-9026-TC - Tracked Changes. Raw rubber or unvulcanized compounds. Determination of green strength
- BS-ISO-9028 - Rubber. Dissolution by acid digestion
- BS-ISO-9924-1 - Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry
- BS-ISO-9924-1-TC - Tracked Changes. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry
- BS-ISO-9924-2 - Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry
- BS-ISO-9924-2-TC - Tracked Changes. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry
- BS-ISO-9924-3 - Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry
- PD-ISO-12134 - Rubber. Estimation of uncertainty for test methods. Non-functional parameters
- PD-ISO-17051 - Rubber, vulcanized. Guidelines for material specification
- PD-ISO-17796 - Rubber. Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
- PD-ISO-21396 - Rubber. Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments. Pyrolysis-GC/MS method
- PD-ISO-22640 - Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- PD-ISO-22687 - Rubber. Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
- PD-ISO-289-4 - Rubber, unvulcanized. Determinations using a shearing-disc viscometer
- PD-ISO-7620 - Rubber materials. Chemical resistance
- PD-ISO/TS-22687 - Rubber. Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
ISO:
- ISO-10398 - Rubber - Identification of accelerators in cured and uncured compounds
- ISO-11345 - Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods
- ISO-11346 - Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use
- ISO-11753 - Rubber and rubber products -- Confidence intervals of repeatability and reproducibility values determined by inter-laboratory tests
- ISO-12134 - Rubber - Estimation of uncertainty for test methods - Non-functional parameters
- ISO-12493 - Rubber, vulcanized or thermoplastic - Determination of stress in tension under non-isothermal conditions
- ISO-12965 - Butadiene rubber -- Determination of microstructure by infra-red spectrometry
- ISO-13145 - Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
- ISO-132 - Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
- ISO-13226 - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- ISO-133 - Rubber, vulcanized -- Determination of crack growth (De Mattia)
- ISO-13507 - Rubber compounds, raw rubbers and compounding materials - Short terms for properties reported in certificates of analysis
- ISO-1382 - Rubber - Vocabulary
- ISO-1399 - Rubber, vulcanized -- Determination of permeability to gases -- Constant volume method
- ISO-1407 - Rubber - Determination of solvent extract
- ISO-1408 - Rubber - Determination of carbon black content - Pyrolytic and chemical degradation methods
- ISO-14309 - Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity
- ISO-1431-1 - Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
- ISO-1431-1-1 - Rubber vulcanized - Resistance to ozone cracking - Part 1: Static strain testAmendment 1
- ISO-1431-3 - Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
- ISO-1432 - Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
- ISO-1434 - Natural rubber in bales - Amount of bale coating - Determination
- ISO-14558 - Rubber - Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
- ISO-15113 - Rubber - Determination of frictional properties
- ISO-15671 - Rubber and rubber products - Determination of total sulfur content using an automatic analyser
- ISO-15672 - Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser
- ISO-1629 - Rubber and latices - Nomenclature
- ISO-1629-1 - Rubbers and latices - NomenclatureAmendment 1 - Corrigendum
- ISO-1653 - Vulcanized rubbers -- Determination of compression set under constant deflection at low temperatures
- ISO-16565 - Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
- ISO-1658 - Natural rubber (NR) - Evaluation procedure
- ISO-17051 - Rubber, vulcanized - Guidelines for material specification
- ISO-17257 - Rubber - Identification of polymers - Pyrolytic gas-chromatographic method using mass-spectrometric detection
- ISO-17564 - Raw hydrogenated nitrile rubber (HNBR) - Determination of residual unsaturation by iodine value
- ISO-17796 - Rubber - Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
- ISO-1817 - Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
- ISO-1827 - Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
- ISO-18517 - Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
- ISO-1853 - Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
- ISO-18766 - Rubber, vulcanized or thermoplastic - Low temperature testing - General introduction and guide
- ISO-188 - Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
- ISO-18898 - Rubber - Calibration and verification of hardness testers
- ISO-18899 - Rubber - Guide to the calibration of test equipment
- ISO-19003 - Rubber and rubber products - Guidance on the application of statistics to physical testing
- ISO-19004 - Rubber and rubber products - Determination of the sensitivity of test methods
- ISO-19051 - Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content by Micro Dumas combustion method
- ISO-19242 - Rubber - Determination of total sulfur content by ion chromatography
- ISO-19983 - Rubber - Determination of precision of test methods
- ISO-19984-1 - Rubber and rubber products - Determination of biobased content - Part 1: General principles and calculation methods using the formulation of the rubber compound
- ISO-19984-2 - Rubber and rubber products - Determination of biobased content - Part 2: Biobased carbon content
- ISO-19984-3 - Rubber and rubber products - Determination of biobased content - Part 3: Biobased mass content
- ISO-2007 - Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method
- ISO-20163 - Vulcanized rubber - Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- ISO-20463 - Rubber and rubber products - Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials
- ISO-21396 - Rubber - Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments - Pyrolysis-GC/MS method
- ISO-21490 - Rubber and rubber products - Determination of 2-mercaptobenzothiazole content by high performance liquid chromatography (HPLC)
- ISO-21561 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR
- ISO-21561-1 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 1: 1H-NMR and IR with cast-film method
- ISO-21561-2 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 2: FTIR with ATR method
- ISO-21561-AM1 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Amendment 1
- ISO-2230 - Rubber products - Guidelines for storage
- ISO-22638 - Rubber - Generation and collection of tyre and road wear particles (TRWP) - Road simulator laboratory method
- ISO-22640 - Rubber - Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- ISO-22687 - Rubber - Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
- ISO-22768 - Raw rubber and rubber latex - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- ISO-2285 - Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
- ISO-2302 - Isobutene-isoprene rubber (IIR) - Evaluation procedure
- ISO-2303 - Isoprene rubber (IR) - Non-oil-extended, solution-polymerized types - Evaluation procedures
- ISO-2303-1 - Amendment 1:1993 To ISO-2303:1990 Isoprene Rubber (Ir) - Non-Oil-Extended, Solution-Polyme
- ISO-23075 - Vulcanized rubbers - Determination of antidegradants by high-performance liquid chromatography
- ISO-2322 - Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
- ISO-2322-1 - Amendment 1:1993 To ISO-2322:1985 Rubber, Styrene-Butadiene(Sbr, Ysbr) - Emulsion and Solut
- ISO-23233 - Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc
- ISO-23233-AM1 - - Amendment 1
- ISO-23337 - Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
- ISO-23508 - Solution-polymerized SBR - Evaluation methods of viscoelastic properties
- ISO-23529 - Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- ISO-23794 - Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
- ISO-2393 - Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
- ISO-24087 - Rubber, vulcanized - Determination of the glass transition temperature and enthalpy by differential scanning calorimetry
- ISO-24329 - Low-protein natural rubber latex concentrate - Specification
- ISO-24453 - Rubber - Acquisition and presentation of comparable single-point data
- ISO-24454 - Rubber - Acquisition and presentation of comparable multi-point data
- ISO-24483 - Epoxidized natural rubber - Specifications
- ISO-2454 - Rubber products - Determination of zinc content - EDTA titrimetric method
- ISO-247 - Rubber - Determination of ash
- ISO-247-1 - Rubber - Determination of ash - Part 1: Combustion method
- ISO-247-2 - Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA)
- ISO-2475 - Chloroprene rubber (CR) - General-purpose types - Evaluation procedure
- ISO-2475-1 - Rubber, chloroprene (CR) - General purpose types - Evaluation proceduresAmendment 1
- ISO-2476 - Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures
- ISO-27588 - Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
- ISO-27727 - Rubber, vulcanized - Measurement of fatigue crack growth rate
- ISO-2781 - Rubber, vulcanized or thermoplastic - Determination of density
- ISO-2781-AM1 - Rubber, vulcanized - Determination of density - Amendment 1: Precision data
- ISO-2782 - Rubber, vulcanized or thermoplastic - Determination of permeability to gases
- ISO-2782-1 - Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods
- ISO-2782-2 - Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 2: Equal-pressure method
- ISO-2878 - Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance
- ISO-289-1 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity
- ISO-289-2 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
- ISO-289-3 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
- ISO-289-4 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 4: Determination of the Mooney stress-relaxation rate
- ISO-2921 - Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- ISO-2951 - Rubber, vulcanized rubber - Determination of insulation resistance
- ISO-3384 - Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
- ISO-3384-1 - Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature
- ISO-3384-1-AM1 - - Amendment 1: Revised calibration schedule
- ISO-3384-2 - Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling
- ISO-3384-AM1 - Amendment 1: Precision Data, Rubber, Vulcanized or Thermoplastic - Determination of St
- ISO-3387 - Rubber - Determination of crystallization effects by hardness measurements
- ISO-34-1 - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
- ISO-3417 - Rubber - Measurement of vulcanization characteristics with the oscillating disc curemeter
- ISO-34-1-RL - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (includes Redline Version)
- ISO-34-2 - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
- ISO-36 - Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
- ISO-37 - Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
- ISO-3865 - Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material
- ISO-4097 - Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
- ISO-4645 - Rubber and rubber products - Identification of antidegradants - Thin layer chromatographic methods
- ISO-4647 - Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test
- ISO-4649 - Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
- ISO-4650 - Rubber - Identification - Infrared spectrometric methods
- ISO-4658 - Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
- ISO-4658-1 - Rubber, acrylonitrile-butadiene (NBR) - Test recipe and evaluation of vulcanization characteristics - Amendment 1
- ISO-4659 - Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure
- ISO-4661-2 - Rubber, vulcanized - Preparation of samples and test pieces - Part 2: Chemical tests
- ISO-4662 - Rubber, vulcanized or thermoplastic - Determination of rebound resilience
- ISO-4664-1 - Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance
- ISO-4664-2 - Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2: Torsion pendulum methods at low frequencies
- ISO-4664-3 - Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3: Glass transition temperature (Tg)
- ISO-4665 - Rubber, vulcanized or thermoplastic - Resistance to weathering
- ISO-4666-1 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 1: Basic principles
- ISO-4666-2 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 2: Rotary flexometer
- ISO-4666-3 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3: Compression flexometer (constant-strain type)
- ISO-4666-4 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer
- ISO-48 - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO-48-1 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1: Introduction and guidance
- ISO-48-2 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
- ISO-48-3 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
- ISO-48-4 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
- ISO-48-5 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
- ISO-48-9 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
- ISO-5260 - Epoxidized natural rubber - Determination of epoxidation and ring opening level by NMR spectrometry
- ISO-5478 - Rubber - Determination of styrene content - Nitration method
- ISO-5600 - Rubber - Determination of adhesion to rigid materials using conical shaped parts
- ISO-5603 - Rubber, vulcanized - Determination of adhesion to wire cord
- ISO-6101-1 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 1: Determination of zinc content
- ISO-6101-2 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 2: Determination of lead content
- ISO-6101-3 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
- ISO-6101-4 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
- ISO-6101-5 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
- ISO-6101-6 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content
- ISO-6133 - Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- ISO-6502 - Rubber - Guide to the use of curemeters
- ISO-6502-1 - Rubber - Measurement of vulcanization characteristics using curemeters - Part 1: Introduction
- ISO-6502-2 - Rubber - Measurement of vulcanization characteristics using curemeters - Part 2: Oscillating disc curemeter
- ISO-6502-3 - Rubber - Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter
- ISO-6505 - Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals
- ISO-6528-1 - Rubber - Determination of total sulfur content - Part 1: Oxygen combustion flask method
- ISO-6528-3 - Rubber - Determination of total sulfur content - Part 3 : Furnace combustion method
- ISO-6914 - Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
- ISO-6943 - Rubber, vulcanized - Determination of tension fatigue
- ISO-7269 - Rubber - Determination of free sulfur
- ISO-7270-1 - Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends)
- ISO-7270-1-AM1 - Amendment 1 to ISO 7270-1
- ISO-7270-2 - Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
- ISO-7323 - Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel-plate method
- ISO-7619-1 - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
- ISO-7619-1-1 - Amendment 1: Precision Data, Part 1: Durometer Method (Shore Hardness), Rubber, Vulcan
- ISO-7619-2 - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
- ISO-7620 - Rubber materials - Chemical resistance
- ISO-7663 - Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures
- ISO-7725 - Rubber and rubber products - Determination of chlorine and bromine content
- ISO-7743 - Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
- ISO-7780 - Rubbers and rubber latices - Determination of manganese content - Sodium periodate photometric methods
- ISO-8013 - Rubber, vulcanized - Determination of creep in compression or shear
- ISO-8053 - Rubber and latex - Determination of copper content - Photometric method
- ISO-812 - Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
- ISO-813 - Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method
- ISO-813-2 - Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - Part 2: Adhesion of a soft thermoplastic elastomer layer
- ISO-814 - Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
- ISO-815-1 - Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
- ISO-815-2 - Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
- ISO-9026 - Raw rubber or unvulcanized compounds - Determination of green strength
- ISO-9028 - Rubber - Dissolution by acid digestion
- ISO-9272 - Rubber and rubber products - Determination of precision for test method standards
- ISO-9924-1 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
- ISO-9924-2 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
- ISO-9924-2-AM1 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers - Amendment 1
- ISO-9924-3 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers
- PD-ISO-22638 - Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
Other SDOs:
- DIN-EN-ISO-18064 - Thermoplastic elastomers - Nomenclature and abbreviated terms
- DIN-EN-ISO-75-2 - Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
- DIN-ISO-132 - Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
- DIN-ISO-13226 - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- DIN-ISO-1817 - Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
- DIN-ISO-2285 - Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2013)
- DIN-ISO-23529 - Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2010)
- DIN-ISO-34-1 - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
- DIN-ISO-4649 - Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)
- DIN-ISO-48 - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- DIN-ISO-7743 - Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
- DIN-ISO-812 - Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
- DIN-ISO-813 - Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 Degrees peel method
- EN-ISO-18064 - Thermoplastic elastomers - Nomenclature and abbreviated terms
- JIS-K-6251 - Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
- JIS-K-6253-4 - Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 4: IRHD pocket meter method
- JIS-K-6254 - Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
- JIS-K-6257 - Rubber, vulcanized or thermoplastic -- Determination of heat ageing properties
- SIS-ISO/TR-11753 - Rubber and rubber products - Confidence intervals of repeatability and reproducibility values determined by inter-laboratory tests
- SIS-ISO/TR-12134 - Rubber - Estimation of uncertainty for test methods - Non-functional parameters (ISO/TR 12134:2010, IDT)
- SIS-ISO/TR-17051 - Rubber, vulcanized - Guidelines for material specification
- SIS-ISO/TR-7620 - Rubber materials - Chemical resistance
- SIS-ISO/TR-9272 - Rubber and rubber products - Determination of precision for test method standards
- SIS-ISO/TS-17796 - Rubber Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection (ISO/TS 17796:2013, IDT)
- SS-162010 - Rubber, vulcanized - Material specifications
- SS-EN-12639 - Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
- SS-EN-13508-2 - Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system
- SS-EN-13516 - Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing
- SS-EN-13787 - Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
- SS-EN-278 - Rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
- SS-EN-279 - Homogeneous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
- SS-EN-549 - Rubber materials for seals and diaphragms for gas appliances and gas equipment
- SS-EN-681-1 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-1-AM1 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-1-AM2 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-1-AM3 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-ISO-1856 - Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2018)
- SS-EN-ISO-75-2 - Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
- SS-ISO-10398 - Rubber - Identification of accelerators in cured and uncured compounds
- SS-ISO-11345 - Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods (ISO 11345:2006, IDT)
- SS-ISO-11346 - Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use (ISO 11346:2023, IDT)
- SS-ISO-12244 - Rubber, vulcanized or thermoplastic - Determination of elongation, creep and tension set at constant load
- SS-ISO-12493 - Rubber, vulcanized or thermoplastic Determination of stress in tension under non-isothermal conditions (ISO 12493:2023, IDT)
- SS-ISO-12965 - Butadiene rubber - Determination of microstructure by infra-red spectrometry
- SS-ISO-13145 - Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer (ISO 13145:2023, IDT)
- SS-ISO-132 - Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (ISO 132:2017, IDT)
- SS-ISO-13226 - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2018, IDT)
- SS-ISO-133 - Rubber, vulcanized - Determination of crack growth (De Mattia)
- SS-ISO-13507 - Rubber compounds, raw rubbers and compounding materials - Short terms for properties reported in certificates of analysis (ISO 13507:2012, IDT)
- SS-ISO-1382 - Rubber - Vocabulary (ISO 1382:2020, IDT)
- SS-ISO-1407 - Rubber - Determination of solvent extract (ISO 1407:2011, IDT)
- SS-ISO-14309 - Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity (ISO 14309:2019, IDT)
- SS-ISO-1431-1 - Rubber, vulcanised or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing (ISO 1431-1:2022, IDT)
- SS-ISO-1431-1-AM1 - Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing - Amendment 1(ISO 1431-1:2004/Amd 1:2009, IDT)
- SS-ISO-1431-2 - Rubber, vulcanized and thermoplastic - Resistanceto ozone cracking - Part 2: Dynamic strain test
- SS-ISO-1431-3 - Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017, IDT)
- SS-ISO-1432 - Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) (ISO 1432:2021, IDT)
- SS-ISO-1433 - Rubbar, vulkanized - Preferred gradiations of properties
- SS-ISO-14558 - Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
- SS-ISO-15113 - Rubber - Determination of frictional properties (ISO 15113:2005, IDT)
- SS-ISO-15671 - Rubber and rubber additives - Determination of total sulfur content using an automatic analyser
- SS-ISO-15672 - Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser
- SS-ISO-1629 - Rubber and latices - Nomenclature (ISO 1629:2013, IDT)
- SS-ISO-1629-AM1 - Rubbers and latices - Nomenclature (ISO 1629:1995/Amd 1:2007, IDT)
- SS-ISO-16565 - Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers (ISO 16565:2013, IDT)
- SS-ISO-17257 - Rubber - Identification of polymers - Pyrolytic gas-chromatographic method using mass-spectrometric detection (ISO 17257:2020, IDT)
- SS-ISO-17564 - Raw hydrogenated nitrile rubber (HNBR) - Determination of residual unsaturation by iodine value (ISO 17564:2008, IDT)
- SS-ISO-1798 - Flexible cellular polymeric materials - Determination of tensile strenght and elongation at break
- SS-ISO-1817 - Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2022, IDT)
- SS-ISO-1826 - Rubber, vulcanized - Time-interval between vulcanization and testing - Specification
- SS-ISO-1827 - Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods (ISO 1827:2022, IDT)
- SS-ISO-18517 - Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide (ISO 18517:2015, IDT)
- SS-ISO-1853 - Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity (ISO 1853:2018, IDT)
- SS-ISO-18766 - Rubber, vulcanized or thermoplastic - Low temperature testing - General introduction and guide (ISO 18766:2014, IDT)
- SS-ISO-188 - Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests (ISO 188:2023, IDT)
- SS-ISO-18898 - Rubber - Calibration and verification of hardness testers (ISO 18898:2016, IDT)
- SS-ISO-18899 - Rubber - Guide to the calibration of test equipment (ISO 18899:2013, IDT)
- SS-ISO-19003 - Rubber and rubber products - Guidance on the application of statistics to physical testing (ISO 19003:2006, IDT)
- SS-ISO-19004 - Rubber and rubber products - Determination of the sensitivity of test methods (ISO 19004:2004, IDT)
- SS-ISO-19242 - Rubber - Determination of total sulfur content by ion chromatography (ISO 19242:2021, IDT)
- SS-ISO-19983 - Rubber - Determination of precision of test methods (ISO 19983:2022, IDT)
- SS-ISO-19984-1 - Rubber and rubber products - Determination of biobased content - Part 1: General principles and calculation methods using the formulation of the rubber compound (ISO 19984-1:2017, IDT)
- SS-ISO-19984-2 - Rubber and rubber products - Determination of biobased content - Part 2: Biobased carbon content (ISO 19984-2:2017, IDT)
- SS-ISO-19984-3 - Rubber and rubber products - Determination of biobased content - Part 3: Biobased mass content (ISO 19984-3:2017, IDT)
- SS-ISO-2007 - Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method (ISO 2007:2018, IDT)
- SS-ISO-20163 - Vulcanized rubber - Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC) (ISO 20163:2019, IDT)
- SS-ISO-20463 - Rubber and rubber products - Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials (ISO 20463:2018, IDT)
- SS-ISO-21490 - Rubber and rubber products Determination of 2-mercaptobenzothiazole content by high performance liquid chromatography (HPLC) (ISO 21490:2022, IDT)
- SS-ISO-21561 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR (ISO 21561:2005, IDT)
- SS-ISO-21561-2 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Part 2: FTIR with ATR method (ISO 21561-2:2016, IDT)
- SS-ISO-21561-AM1 - Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR - Amendment 1 (ISO 21561:2005/Amd 1:2010, IDT)
- SS-ISO-2230 - Rubber products - Guidelines for storage
- SS-ISO-22640 - Rubber - Framework for physical and chemical characterization of tyre and road wear particles (ISO 22640:2023, IDT)
- SS-ISO-22768 - Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC) (ISO 22768:2017, IDT)
- SS-ISO-2285 - Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2019, IDT)
- SS-ISO-23075 - Vulcanized rubbers Determination of antidegradants by high-performance liquid chromatography (ISO 23075:2021, IDT)
- SS-ISO-23088 - Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020, IDT)
- SS-ISO-23233 - Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc (ISO 23233:2016, IDT)
- SS-ISO-23337 - Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine (ISO 23337:2016, IDT)
- SS-ISO-23529 - Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2016, IDT)
- SS-ISO-23794 - Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance (ISO 23794:2010, IDT)
- SS-ISO-2393 - Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures (ISO 2393:2014, Corrected version 2014-04-01, IDT)
- SS-ISO-2440 - Flexible and rigid cellular polymeric materials -Accelerated ageing tests
- SS-ISO-24453 - Rubber - Acquisition and presentation of comparable single-point data (ISO 24453:2008, IDT)
- SS-ISO-24454 - Rubber - Acquisition and presentation of comparable multi-point data (ISO 24454:2008, IDT)
- SS-ISO-2454 - Rubber products - Determination of zinc content - EDTA titrimetric method
- SS-ISO-247 - Rubber - Determination of ash (ISO 247:2006, IDT)
- SS-ISO-247-1 - Rubber - Determination of ash - Part 1: Combustion method (ISO 247-1:2018, IDT)
- SS-ISO-247-2 - Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA) (ISO 247-2:2018, IDT)
- SS-ISO-2475 - Chloroprene rubber (CR) - General-purpose types - Evaluation procedure (ISO 2475:2011, IDT)
- SS-ISO-251 - Conveyor belts with textile carcass Widths and lengths (ISO 251:2012, IDT)
- SS-ISO-27588 - Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012, IDT)
- SS-ISO-27727 - Rubber, vulcanized - Measurement of fatigue crack growth rate (ISO 27727:2008, IDT)
- SS-ISO-2781 - Rubber, vulcanized or thermoplastic - Determination of density (ISO 2781:2018, IDT)
- SS-ISO-2781-AM1 - Rubber, vulcanized or thermoplastic - Determination of density - Amendment 1: Precision data (ISO 2781:2008/Amd 1:2010, IDT)
- SS-ISO-2782 - Rubber, vulcanized or thermoplastic - Determination of permeability to gases (ISO 2782:2006, IDT)
- SS-ISO-2782-1 - Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods (ISO 2782-1:2012, IDT)
- SS-ISO-2782-2 - Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 2: Equal-pressure method (ISO 2782-2:2018, IDT)
- SS-ISO-2856 - Elastomers - General requirements for dynamic testing
- SS-ISO-2878 - Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance (ISO 2878:2011, IDT)
- SS-ISO-2882 - Rubber, vulcanized - Antistatic and conductive products for hospital use - Electrical resistance limits
- SS-ISO-2883 - Rubber, vulcanized - Antistatic and conductive products for industrial use - Electrical resistance limits
- SS-ISO-289-1 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015, IDT)
- SS-ISO-289-2 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determination of pre-vulcanization characteristics
- SS-ISO-289-3 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
- SS-ISO-289-4 - Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 4: Determination of the Mooney stress-relaxation rate
- SS-ISO-2921 - Rubber, vulcanized - Determination of low-temperature retraction (TR test) (ISO 2921:2011, IDT)
- SS-ISO-2951 - Rubber, vulcanized rubber - Determination of insulation resistance (ISO 2951:2019, IDT)
- SS-ISO-3383 - Rubber - General directions for achieving elevated or subnormal temperatures for test purposes
- SS-ISO-3384-1 - Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2019, IDT)
- SS-ISO-3384-1-AM1 - Revised calibration schedule (ISO 3384-1:2011/Amd 1:2013, IDT)
- SS-ISO-3384-2 - Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling (ISO 3384-2:2019, IDT)
- SS-ISO-3384-AM1 - Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures - Amendment 1: Precision data
- SS-ISO-3387 - Rubber - Determination of crystallization effects by hardness measurements (ISO 3387:2020, IDT)
- SS-ISO-34-1 - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2022, IDT)
- SS-ISO-3417 - Rubber - Measurement of vulcanization characteristics with the oscillating disc curemeter (ISO 3417:2008, IDT)
- SS-ISO-34-2 - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces (ISO 34-2:2022, IDT)
- SS-ISO-36 - Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics (ISO 36:2020, IDT)
- SS-ISO-37 - Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties (ISO 37:2017, IDT)
- SS-ISO-3865 - Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material (ISO 3865:2020, IDT)
- SS-ISO-4097 - Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure (ISO 4097:2007, IDT)
- SS-ISO-4632-1 - Rubber, vulcanized - Classification - Part 1: Description of the classification system
- SS-ISO-4645 - Rubber and rubber products - Guide to the identification of antidegradants - Thin layer chromatographic methods (ISO 4645:2022, IDT)
- SS-ISO-4647 - Rubber, vulcanized - Determination of static adhesion to textile cord - H-pull test (ISO 4647:2021, IDT)
- SS-ISO-4648 - Rubber, vulcanized or thermoplastic - Determination of dimensions of test pieces and products for test purposes
- SS-ISO-4649 - Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2017, IDT)
- SS-ISO-4650 - Rubber - Identification - Infrared spectrometric methods (ISO 4650:2012, IDT)
- SS-ISO-4661-1 - Rubber, vulcanized or thermoplastic - Preparationof samples and test pieces - Part 1: Physical tests
- SS-ISO-4661-2 - Rubber, vulcanized - Preparation of samples and test pieces - Part 2: Chemical tests (ISO 4661-2:2018, IDT)
- SS-ISO-4662 - Rubber, vulcanized or thermoplastic - Determination of rebound resilience (ISO 4662:2009, IDT)
- SS-ISO-4664 - Rubber - Guide to the determination of dynamic properties
- SS-ISO-4664-1 - Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance (ISO 4664-1:2022, IDT)
- SS-ISO-4664-2 - Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2: Torsion pendulum methods at low frequencies (ISO 4664-2:2006, IDT)
- SS-ISO-4664-3 - Rubber, vulcanized or thermoplastic Determination of dynamic properties Part 3: Glass transition temperature (Tg) (ISO 4664-3:2021, IDT)
- SS-ISO-4665 - Rubber, vulcanized or thermoplastic - Resistance to weathering (ISO 4665:2006, IDT)
- SS-ISO-4665-1 - Rubber, vulcanized - Resistance to weathering - Part 1: Assessment of changes in properties after exposure to natural weathering or artifical light
- SS-ISO-4665-2 - Rubber, vulcanized - Resistance to weathering - Part 2: Methods of exposure to natural weathering
- SS-ISO-4665-3 - Rubber, vulcanized - Resistance to weathering - Part 3: Methods of exposure to artificial light
- SS-ISO-4666-1 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 1: Basic principles (ISO 4666-1:2010, IDT)
- SS-ISO-4666-2 - Rubber, vulcanized - Determination of temperaturerise and resistance to fatigue in flexometer testing - Part 2: Rotary flexometer (ISO 4666-2:2008, IDT)
- SS-ISO-4666-3 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3: Compression flexometer (constant-strain type) (ISO 4666-3:2022, IDT)
- SS-ISO-4666-4 - Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer (ISO 4666-4:2018, IDT)
- SS-ISO-48 - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD och 100 IRHD) (ISO 48:2010, IDT)
- SS-ISO-48-1 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1: Introduction and guidance (ISO 48-1:2018, IDT)
- SS-ISO-48-2 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD (ISO 48-2:2018, IDT)
- SS-ISO-48-3 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018, IDT)
- SS-ISO-48-4 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018, IDT)
- SS-ISO-48-5 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method (ISO 48-5:2018, IDT)
- SS-ISO-48-9 - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018, IDT)
- SS-ISO-48-AM1 - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) - Amendment 1
- SS-ISO-5478 - Rubber - Determination of styrene content - Nitration method (ISO 5478:2006, IDT)
- SS-ISO-5600 - Rubber - Determination of adhesion to rigid materials using conical shaped parts (ISO 5600:2017, IDT)
- SS-ISO-5603 - Rubber, vulcanized - Determination of adhesion to wire cord (ISO 5603:2017, IDT)
- SS-ISO-583 - Rubber and rubber products - Determination of chlorine and bromine content (ISO 7725:2020, IDT)
- SS-ISO-5893 - Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification (ISO 5893:2019, IDT)
- SS-ISO-5945 - Rubber - Determination of polyisoprene content
- SS-ISO-6101-1 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 1: Determination of zinc content (ISO 6101-1:2019, IDT)
- SS-ISO-6101-2 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 2: Determination of lead content (ISO 6101-2:2019, IDT)
- SS-ISO-6101-3 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
- SS-ISO-6101-4 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
- SS-ISO-6101-5 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content (ISO 6101-5:2018, IDT)
- SS-ISO-6101-6 - Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content (ISO 6101-6:2018, IDT)
- SS-ISO-6133 - Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015, IDT)
- SS-ISO-6179 - Rubber, vulcanized and thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
- SS-ISO-6471 - Rubber, vulcanized - Determination of crystallization effects under compression
- SS-ISO-6502 - Rubber - Guide to the use of curemeters
- SS-ISO-6502-1 - Rubber - Measurement of vulcanization characteristics using curemeters - Part 1: Introduction (ISO 6502-1:2018, IDT)
- SS-ISO-6502-2 - Rubber - Measurement of vulcanization characteristics using curemeters - Part 2: Oscillating disc curemeter (ISO 6502-2:2018, IDT)
- SS-ISO-6502-3 - Rubber - Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter (ISO 6502-3:2023, IDT)
- SS-ISO-6505 - Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals (ISO 6505:2021, IDT)
- SS-ISO-6528-1 - Rubber - Determination of total sulphur content - Part 1: Oxygen combustion flask method
- SS-ISO-6528-2 - Rubber - Determination of total sulphur content - Part 2: Sodium peroxide fusion method
- SS-ISO-6528-3 - Rubber - Determination of total sulphur content - Part 3: Furnace combustion method
- SS-ISO-6914 - Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension (ISO 6914:2021, IDT)
- SS-ISO-6943 - Rubber, vulcanized - Determination of tension fatigue (ISO 6943:2011, IDT)
- SS-ISO-7269 - Rubber - Determination of free sulfur
- SS-ISO-7270 - Rubber - Identification of polymers (single polymers and blends) - Pyrolytic gas chromatographic method
- SS-ISO-7270-1 - Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends) (ISO 7270-1:2020, IDT)
- SS-ISO-7270-1-AM1 - Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends) - Amendment 1 (ISO 7270-1:2003/Amd 1:2010, IDT)
- SS-ISO-7270-2 - Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio (ISO 7270-2:2012, IDT)
- SS-ISO-7323 - Rubber, raw and unvulcanized, compounded - Determination of plasticity number and recovery number - Parallel plate method (ISO 7323:2006, IDT)
- SS-ISO-7619 - Rubber - Determination of indentation hardness bymeans of pocket hardness meters
- SS-ISO-7619-1 - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010, IDT)
- SS-ISO-7619-1-AM1 - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) - Amendment 1: Precision data (ISO 7619-1:2004/Amd 1:2008, IDT)
- SS-ISO-7619-2 - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method (ISO 7619-2:2010, IDT)
- SS-ISO-7725 - Rubber and rubber products - Determination of bromine and chlorine content - Oxygen flask combustion technique
- SS-ISO-7743 - Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2011, IDT)
- SS-ISO-7780 - Rubber and rubber latices - Determination of manganese content - Sodium periodate photometric methods
- SS-ISO-8013 - Rubber, vulcanized - Determination of creep in compression or shear (ISO 8013:2019, IDT)
- SS-ISO-8053 - Rubber and latex - Determination of copper content - Photometric method
- SS-ISO-8054 - Rubber, compounded or vulcanized - Determination of sulfide sulfur content - Iodometric method
- SS-ISO-812 - Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017, IDT)
- SS-ISO-813 - Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 degree peel method (ISO 813:2010, IDT)
- SS-ISO-814 - Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method (ISO 814:2017, IDT)
- SS-ISO-815 - Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
- SS-ISO-815-1 - Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2019, IDT)
- SS-ISO-815-2 - Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2019, IDT)
- SS-ISO-9026 - Raw rubber or unvalcanised compounds - Determination of green strength (ISO 9026:2021, IDT)
- SS-ISO-9028 - Rubber - Dissolution by acid digestion (ISO 9028:2006, IDT)
- SS-ISO-9924-1 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers (ISO 9924-1:2023, IDT)
- SS-ISO-9924-2 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
- SS-ISO-9924-2-AM1 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers - Amendment 1 (ISO 9924-2:2000/Amd 1:2012, IDT)
- SS-ISO-9924-3 - Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction (ISO 9924-3:2009, IDT)
- UNE-ISO-36 - Rubber, vulcanized or thermoplastic. Determination of adhesion to textiles fabrics
- UNE-ISO-3865 - Rubber vulcanized or thermoplastic. Methods of test for staining in contact with organic material
- UNE-ISO-7743 - Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
- UNI-ISO-815-1 - Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures