Document Center List of Standards on Laminated Sheets
ICS Code 83.140.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C582 - Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
- ASTM-D2344 - Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
- ASTM-D3171 - Standard Test Methods for Constituent Content of Composite Materials
- ASTM-D3410 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
- ASTM-D3479 - Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
- ASTM-D3615 - Test Method for Chemical Resistance of Thermoset Molding Compouds Used in the Manufacture of Molded Fittings (Withdrawn 1993)
- ASTM-D3917 - Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM-D4255 - Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM-D4762 - Standard Guide for Testing Polymer Matrix Composite Materials
- ASTM-D494 - Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
- ASTM-D5083 - Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
- ASTM-D5109 - Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards (Withdrawn 2020)
- ASTM-D5229 - Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
- ASTM-D5300 - Standard Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods (Withdrawn 2000)
- ASTM-D5379 - Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM-D5449 - Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM-D5450 - Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM-D5477 - Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
- ASTM-D669 - Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials (Withdrawn 2012)
- ASTM-D6873 - Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
- ASTM-D7078 - Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM-D709 - Standard Specification for Laminated Thermosetting Materials
- ASTM-D7956 - Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
- ASTM-E1556 - Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
- ASTM-E1922 - Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM-F904 - Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
BSI:
- BS-2572 - Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet
- BS-3794-2 - Decorative, high pressure laminates (HPL) based on thermosetting resins
- BS-4965 - Decorative laminated plastics sheet veneered boards and panels
- BS-7332 - Specification for decorative continuous laminates (DCL) based on thermosetting resins
- BS-EN-438-1 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-2 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-3 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-4 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-4-TC - Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-5 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-5-TC - Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-6 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-6-TC - Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-7 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-8 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-8-TC - Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-9 - High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-438-9-TC - Tracked Changes. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
- BS-EN-ISO-13894-1 - High-pressure decorative laminates. Composite elements. Test methods
- BS-EN-ISO-13894-2 - High-pressure decorative laminates. Composite elements. Specifications for composite elements with wood-based substrates for interior use
- BS-EN-ISO-19712-1 - Plastics. Decorative solid surfacing materials
- BS-EN-ISO-19712-2 - Plastics. Decorative solid surfacing materials
- BS-EN-ISO-19712-3 - Plastics. Decorative solid surfacing materials
- BS-EN-ISO-19712-3-TC - Tracked Changes. Plastics. Decorative solid surfacing materials
- BS-EN-ISO-75-3 - Plastics. Determination of temperature of deflection under load. High-strength thermosetting laminates and long-fibre-reinforced plastics
- BS-ISO-13894-1 - High-pressure decorative laminates. Composite elements. Test methods
- BS-ISO-13894-2 - High-pressure decorative laminates. Composite elements. Specifications for composite elements with wood-based substrates for interior use
- BS-ISO-19712-1 - Plastics, Decorative Solid Surfacing Materials, Classification & Specifications
- BS-ISO-19712-2 - Plastics, Decorative Solid Surfacing Materials, Determination of Properties, Sheet Goo
- BS-ISO-19712-3 - Plastics, Decorative Solid Surfacing Materials, Determination of Properties, Solid Sur
- BS-ISO-4586-1 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-2 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-3 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-4 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-5 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-6 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-7 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
- BS-ISO-4586-8 - High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates)
ISO:
- ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods
- ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2: Specifications for composite elements with wood-based substrates for interior use
- ISO-19712-1 - Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
- ISO-19712-2 - Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
- ISO-19712-3 - Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
- ISO-4586-1 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
- ISO-4586-1-3 - Plastics - Decorative laminated sheets based on thermosetting resins - Part 1: SpecificationAmendment 3: Lightfastness
- ISO-4586-2 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
- ISO-4586-2-3 - Plastics - Decorative laminated sheets based on thermosetting resins - Part 2: Determination of propertiesAmendment 3: Lightfastness
- ISO-4586-2-6 - Plastics - Decorative laminated sheets based on thermosetting resins - Part 2: Determination of propertiesAmendment 6: Resistance to wet heat
- ISO-4586-2-7 - Stain resistance and cleanability
- ISO-4586-2-8 - Amendment 8: Dimensional Stability, High-Pressure Decorativelaminates - Sheets Made From
- ISO-4586-3 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
- ISO-4586-4 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
- ISO-4586-5 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- ISO-4586-6 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
- ISO-4586-7 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Classification and specifications for design laminates
- ISO-4586-8 - High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for alternative core laminates
Other SDOs:
- DIN-EN-438-1 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information; German version EN 438-1:2016
- DIN-EN-438-2 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016
- DIN-EN-438-3 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less that 2 mm thick intended for bonding to supporting substrates; German version EN 438-
- DIN-EN-438-4 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater; German version EN 438-4:2016
- DIN-EN-438-5 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates; German
- DIN-EN-438-6 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6 : Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater; German version EN 438-6:2016
- DIN-EN-438-7 - Part 7: Compact Laminate & Hpl Composite Panels for Internal & External Wall & Ceiling
- DIN-EN-ISO-75-3 - Part 3: High-Strength Thermosetting Laminates & Long-Fibre-Reinforced Plastics, Plasti
- EN-438-1 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
- EN-438-2 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
- EN-438-3 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- EN-438-4 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
- EN-438-5 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- EN-438-6 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
- EN-438-7 - Part 7: Compact Laminate & Hpl Composite Panels for Internal & External Wall & Ceiling
- EN-438-8 - High-Pressure Decorative Laminates (Hpl), Sheets Based on Thermosetting Resins (Usuall
- EN-438-9 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates
- EN-ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods
- EN-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use
- EN-ISO-19712-1 - Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
- EN-ISO-19712-2 - Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
- EN-ISO-19712-3 - Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
- EN-ISO-75-3 - Part 3: High-Strength Thermosetting Laminates & Long-Fibre-Reinforced Plastics, Plasti
- SS-EN-16795 - Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation
- SS-EN-438-1 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
- SS-EN-438-2 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
- SS-EN-438-2-AM1 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
- SS-EN-438-3 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
- SS-EN-438-4 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
- SS-EN-438-5 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- SS-EN-438-6 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
- SS-EN-438-7 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
- SS-EN-438-8 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for design laminates
- SS-EN-438-9 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
- SS-EN-ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods (ISO 13894-1:2000)
- SS-EN-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use (ISO 13894-2:2005)
- SS-EN-ISO-14129 - Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/-45 degrees tension test method (ISO 14129:1997)
- SS-EN-ISO-19712-1 - Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
- SS-EN-ISO-19712-2 - Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
- SS-EN-ISO-19712-3 - Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
- SS-EN-ISO-75-3 - Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
- SS-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2: Specifications for composite elements with wood-based substrates for interior use (ISO 13894-2:2005, IDT)
- SS-ISO-14513 - Road vehicles - Pedestrian protection - Head impact test method (ISO 14513:2016, IDT)
- SS-ISO-4586-1 - High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications (ISO 4586-1:2004, IDT)
- SS-ISO-4586-2 - High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties (ISO 4586-2:2004, IDT)
- UNE-EN-ISO-13894-1 - High-pressure decorative laminates - Composite elements - Part 1: Test methods
- UNE-EN-ISO-13894-2 - High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use