Document Center List of Standards on Pigments And Extenders
ICS Code 87.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C979 - Standard Specification for Pigments for Integrally Colored Concrete
- ASTM-D1135 - Standard Test Methods for Chemical Analysis of Blue Pigments
- ASTM-D1199 - Standard Specification for Calcium Carbonate Pigments
- ASTM-D1208 - Standard Test Methods for Common Properties of Certain Pigments
- ASTM-D1210 - Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
- ASTM-D126 - Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
- ASTM-D1301 - Standard Test Methods for Chemical Analysis of White Lead Pigments
- ASTM-D1306 - Standard Test Method for Phthalic Anhydride Content of Alkyd Resins and Esters Containing Other Dibasic Acids (Gravimetric) (Withdrawn 2004)
- ASTM-D1394 - Standard Test Methods for Chemical Analysis of White Titanium Pigments
- ASTM-D1483 - Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
- ASTM-D153 - Standard Test Methods for Specific Gravity of Pigments
- ASTM-D1615 - Standard Test Methods for Glycerol, Ethylene Glycol, and Pentaerythritol in Alkyd Resins (Withdrawn 2004)
- ASTM-D1648 - Standard Specification for Basic Lead Silicochromate Pigment
- ASTM-D1649 - Standard Specification for Strontium Chromate Pigment
- ASTM-D1844 - Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
- ASTM-D1845 - Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
- ASTM-D185 - Standard Test Methods for Coarse Particles in Pigments
- ASTM-D209 - Standard Specification for Lampblack Pigment
- ASTM-D210 - Standard Specification for Bone Black Pigment
- ASTM-D211 - Standard Specification for Chrome Yellow and Chrome Orange Pigments
- ASTM-D212 - Specification for Chrome Green Pigment (Withdrawn 1994)
- ASTM-D2218 - Standard Specification for Molybdate Orange Pigments
- ASTM-D2350 - Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints (Withdrawn 2023)
- ASTM-D2351 - Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints (Withdrawn 2023)
- ASTM-D2352 - Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints (Withdrawn 2023)
- ASTM-D2371 - Standard Test Method for Pigment Content of Solvent-Reducible Paints
- ASTM-D2448 - Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
- ASTM-D262 - Standard Specification for Ultramarine Blue Pigment (Withdrawn 2005)
- ASTM-D263 - Standard Specification for Chrome Oxide Green Pigment
- ASTM-D2698 - Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
- ASTM-D2745 - Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
- ASTM-D279 - Standard Test Methods for Bleeding of Pigments
- ASTM-D280 - Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
- ASTM-D281 - Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
- ASTM-D283 - Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
- ASTM-D284 - Standard Test Methods for Chemical Analysis of Mercuric Oxide Pigment (Withdrawn 2003)
- ASTM-D3021 - Standard Specification for Phthalocyanine Green Pigments
- ASTM-D3022 - Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill (Withdrawn 2020)
- ASTM-D305 - Standard Test Method for Solvent-Extractable Material in Black Pigments
- ASTM-D3256 - Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
- ASTM-D3280 - Standard Test Methods for Analysis of White Zinc Pigments
- ASTM-D332 - Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
- ASTM-D3360 - Standard Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments (Withdrawn 2003)
- ASTM-D34 - Standard Guide for Chemical Analysis of White Pigments
- ASTM-D3436 - Standard Practice for Sampling and Handling Aniline (Withdrawn 2005)
- ASTM-D3619 - Standard Specification for Aluminum Silicate Pigments (Anhydrous) (Withdrawn 2004)
- ASTM-D3720 - Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
- ASTM-D3721 - Standard Specification for Synthetic Red Iron Oxide Pigment
- ASTM-D3722 - Standard Specification for Natural Red and Brown Iron Oxide Pigments
- ASTM-D3723 - Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM-D3724 - Standard Specification for Synthetic Brown Iron Oxide Pigment
- ASTM-D387 - Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023)
- ASTM-D3926 - Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
- ASTM-D4139 - Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
- ASTM-D4288 - Standard Specification for Calcium Borosilicate Pigments
- ASTM-D4303 - Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
- ASTM-D444 - Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
- ASTM-D4450 - Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
- ASTM-D4451 - Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- ASTM-D4462 - Standard Specification for Zinc Hydroxy Phosphite Pigment
- ASTM-D4563 - Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
- ASTM-D475 - Standard Specification for Pure Para Red Toner Pigment (Withdrawn 2003)
- ASTM-D476 - Standard Classification for Dry Pigmentary Titanium Dioxide Products
- ASTM-D4764 - Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
- ASTM-D478 - Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
- ASTM-D480 - Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
- ASTM-D49 - Standard Test Methods of Chemical Analysis of Red Lead
- ASTM-D50 - Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
- ASTM-D5081 - Standard Test Method for Aggregate Layer Hiding Power
- ASTM-D520 - Standard Specification for Zinc Dust Pigment
- ASTM-D521 - Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
- ASTM-D5380 - Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
- ASTM-D5381 - Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
- ASTM-D5532 - Standard Specification for Micaceous Iron Oxide Pigments for Paint (Withdrawn 2004)
- ASTM-D561 - Standard Specification for Carbon Black Pigment for Paint
- ASTM-D602 - Standard Specification for Barium Sulfate Pigments
- ASTM-D603 - Standard Specification for Aluminum Silicate Pigments (Hydrous) (Withdrawn 2004)
- ASTM-D605 - Standard Specification for Magnesium Silicate Pigment (Talc)
- ASTM-D607 - Standard Specification for Wet Ground Mica Pigments
- ASTM-D6131 - Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
- ASTM-D6280 - Standard Specification for Zinc Phosphate Pigments
- ASTM-D656 - Standard Specification for Pure Toluidine Red Toner (Withdrawn 2003)
- ASTM-D6580 - Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
- ASTM-D6619 - Standard Practice for Incorporating Pigments by High Speed Dispersion
- ASTM-D715 - Standard Test Methods for Analysis of Barium Sulfate Pigment
- ASTM-D716 - Standard Test Methods for Evaluating Mica Pigment
- ASTM-D718 - Standard Test Methods for Analysis of Aluminum Silicate Pigment
- ASTM-D719 - Standard Test Methods for Analysis of Diatomaceous Silica Pigment (Withdrawn 2003)
- ASTM-D7540 - Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
- ASTM-D763 - Standard Specification for Raw and Burnt Umber Pigments
- ASTM-D765 - Standard Specification for Raw and Burnt Sienna Pigments
- ASTM-D768 - Standard Specification for Yellow Iron Oxide Hydrated
- ASTM-D769 - Standard Specification for Black Synthetic Iron Oxide
- ASTM-D7723 - Standard Test Method for Rubber Property—Macro-Dispersion of Fillers in Compounds
- ASTM-D79 - Standard Specification for Zinc Oxide Pigments
- ASTM-D8043 - Standard Guide for Carbon Black—Shelf Life
- ASTM-D81 - Standard Specification for Basic Carbonate White Lead Pigment
- ASTM-D83 - Standard Specification for Red Lead Pigment
- ASTM-D85 - Standard Specification for Ochre Pigment
- ASTM-D911 - Specification for Mercuric Oxide for Use in Antifouling Paints (Withdrawn 1994)
- ASTM-D962 - Standard Specification for Aluminum Powder and Paste Pigments for Paints
- ASTM-D970 - Standard Test Methods for Para Red and Toluidine Red Pigments (Withdrawn 2003)
- ASTM-E2033 - Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
- ASTM-E2539 - Standard Test Method for Multiangle Color Measurement of Interference Pigments
BSI:
- BS-1795 - Specification for extenders for paints
- BS-282 - Specifications for lead chromes and zinc chromes for paints
- BS-282,-389 - Specifications for lead chromes and zinc chromes for paints
- BS-318 - Specification for chrome oxide green pigments for paints
- BS-3483-0 - Methods for testing pigments for paints
- BS-3483-A1 - Methods for testing pigments for paints. Comparison of colour
- BS-3483-A3 - Methods for testing pigments for paints
- BS-3483-A5 - Methods for testing pigments for paints
- BS-3483-A7 - Colorimetric Method for the Comparison of the Colours, in Full-Shade Systems, of White
- BS-3483-B3 - Methods for testing pigments for paints
- BS-3483-B5 - Methods for testing pigments for paints
- BS-3483-C3 - Methods for testing pigments for paints. Determination of acidity or alkalinity of the aqueous extract
- BS-3483-C6 - Methods for testing pigments for paints
- BS-3483-C7 - Methods for testing pigments for paints. Comparison of resistance to bleeding
- BS-3483-C8 - Methods for testing pigments for paints. Comparison of heat stability
- BS-3483 INTRODUCTION - Methods for testing pigments for paints
- BS-388 - Specification for aluminium pigments
- BS-3900-A26 - Determination of Pigment Content by Centrifuge
- BS-3900-A27 - Determination of Pigment Content by Ashing
- BS-3900-A28 - Determination of Pigment Content by Filtration
- BS-3981 - Specification. Iron oxide pigments for paints
- BS-EN-12878 - Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
- BS-EN-13900-1 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-13900-2 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
- BS-EN-13900-3 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-10601 - Micaceous iron oxide pigments for paints. Specifications and test methods
- BS-EN-ISO-1247-1 - Aluminium pigments for paints
- BS-EN-ISO-1247-2 - Aluminium pigments for paints
- BS-EN-ISO-1248 - Iron oxide pigments. Specifications and methods of test
- BS-EN-ISO-14680-1 - Paints and varnishes. Determination of pigment content
- BS-EN-ISO-14680-2 - Paints and varnishes. Determination of pigment content
- BS-EN-ISO-14680-3 - Paints and varnishes. determination of pigment content
- BS-EN-ISO-18314-1 - Analytical colorimetry
- BS-EN-ISO-18314-2 - Analytical colorimetry
- BS-EN-ISO-18314-2-TC - Tracked Changes. Analytical colorimetry
- BS-EN-ISO-18314-3 - Analytical colorimetry
- BS-EN-ISO-18314-4 - Analytical colorimetry
- BS-EN-ISO-18314-4-TC - Tracked Changes. Analytical colorimetry
- BS-EN-ISO-18451-1 - Pigments, dyestuffs and extenders. Terminology
- BS-EN-ISO-18451-2 - Pigments, dyestuffs and extenders. Terminology
- BS-EN-ISO-18473-1 - Functional pigments and extenders for special applications
- BS-EN-ISO-21683 - Pigments and extenders. Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics
- BS-EN-ISO-23900-1 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-23900-2 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-23900-3 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-23900-4 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-23900-5 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-23900-6 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics
- BS-EN-ISO-2495 - Specification for iron blue pigments
- BS-EN-ISO-3262-10 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-10-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-11 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-11-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-12 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-12-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-13-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-14 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-14-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-15 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-15-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-16 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-16-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-17 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-17-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-18 - Extenders for paints. Specifications and methods of test
- BS-EN-ISO-3262-18-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-19 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-1-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-20 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-21 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-21-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-22 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-22-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-2-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-3-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-4-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-5 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-5-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-7-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-8 - Extenders. Specifications and methods of test
- BS-EN-ISO-3262-8-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3262-9-TC - Tracked Changes. Extenders. Specifications and methods of test
- BS-EN-ISO-3549 - Zinc dust pigments for paints. Specifications and test methods
- BS-EN-ISO-473 - Lithopone pigments. General requirements and methods of testing
- BS-EN-ISO-591-1 - Titanium dioxide pigments for paints
- BS-EN-ISO-7579 - Dyestuffs. Determination of solubility in organic solvents. Gravimetric and photometric methods
- BS-EN-ISO-787-1 - General methods of test for pigments and extenders
- BS-EN-ISO-787-13 - General methods of test for pigments and extenders
- BS-EN-ISO-787-14 - General methods of test for pigments and extenders
- BS-EN-ISO-787-15 - General methods of test for pigments and extenders
- BS-EN-ISO-787-17 - General methods of test for pigments and extenders
- BS-EN-ISO-787-21 - General methods of test for pigments and extenders
- BS-EN-ISO-787-22 - General methods of test for pigments and extenders
- BS-EN-ISO-787-23 - General methods of test for pigments and extenders
- BS-EN-ISO-787-25 - General methods of test for pigments and extenders
- BS-EN-ISO-787-28 - General methods of tests for pigments and extenders
- BS-EN-ISO-787-3 - General methods of test for pigments and extenders
- BS-EN-ISO-787-4 - General methods of test for pigments and extenders
- BS-EN-ISO-787-5 - General methods of test for pigments and extenders
- BS-EN-ISO-787-7 - General methods of test for pigments and extenders
- BS-EN-ISO-787-8 - General methods of test for pigments and extenders
- BS-EN-ISO-788 - Ultramarine pigments
- BS-EN-ISO-8780-1 - Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics
- BS-EN-ISO-8780-2 - Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics
- BS-EN-ISO-8780-3 - Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics
- BS-EN-ISO-8780-4 - Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics
- BS-EN-ISO-8780-5 - Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics
- BS-EN-ISO-8780-6 - Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics
- BS-EN-ISO-8781-1 - Pigments and extenders. Methods of assessment of dispersion characteristics
- BS-EN-ISO-8781-2 - Pigments and extenders. Methods of assessment of dispersion characteristics
- BS-EN-ISO-8781-3 - Pigments and extenders. Methods of assessment of dispersion characteristics
- BS-ISO-10601 - Micaceous Iron Oxide Pigments for Paints, Specifications & Test Methods
- BS-ISO-1247-1 - Aluminium pigments for paints
- BS-ISO-1247-2 - Aluminium pigments for paints
- BS-ISO-18314-1 - Analytical colorimetry. Practical colour measurement
- BS-ISO-18314-2 - Analytical colorimetry. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
- BS-ISO-18314-3 - Analytical colorimetry. Special indices
- BS-ISO-18314-4 - Analytical colorimetry
- BS-ISO-18314-5 - Analytical colorimetry
- BS-ISO-18473-1 - Functional pigments and extenders for special applications. Nanoscale calcium carbonate for sealant application
- BS-ISO-18473-2 - Functional pigments and extenders for special applications. Nanoscale titanium dioxide for sunscreen application
- BS-ISO-18473-3 - Functional pigments and extenders for special application
- BS-ISO-18473-4 - Functional pigments and extenders for special applications
- BS-ISO-20427 - Pigments and extenders. Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
- BS-ISO-21683 - Pigments and extenders. Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics
- BS-ISO-23157 - Determination of the silanol group content on the surface of fumed silica. Reaction gas chromatographic method
- BS-ISO-23900-1 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. General introduction
- BS-ISO-23900-2 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
- BS-ISO-23900-3 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
- BS-ISO-23900-4 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
- BS-ISO-23900-5 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test
- BS-ISO-23900-6 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by film test
- BS-ISO-473 - Lithopone pigments. General requirements and methods of testing
- BS-ISO-787-17 - General methods of test for pigments and extenders. Comparison of lightening power of white pigments
- BS-ISO-787-28 - General methods of tests for pigments and extenders
ISO:
- ISO-10601 - Micaceous iron oxide pigments for paints - Specifications and test methods
- ISO-1247 - Aluminium pigments for paints
- ISO-1247-1 - Aluminium pigments for paints - Part 1: General aluminium pigments
- ISO-1247-2 - Aluminium pigments for paints - Part 2: Vacuum metallized aluminium pigments
- ISO-1248 - Iron oxide pigments - Specifications and methods of test
- ISO-1249 - Zinc chromate pigments - Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
- ISO-14680-1 - Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method
- ISO-14680-2 - Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method
- ISO-14680-3 - Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method
- ISO-18314-1 - Analytical colorimetry - Part 1: Practical colour measurement
- ISO-18314-2 - Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade and hiding power
- ISO-18314-3 - Analytical colorimetry - Part 3: Special indices
- ISO-18314-4 - Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant
- ISO-18314-5 - Analytical colorimetry - Part 5: Procedure for colorimetric determination of colour differences of object colours according to equidistant colour spaces
- ISO-18451-1 - Pigments, dyestuffs and extenders - Terminology - Part 1: General terms
- ISO-18451-2 - Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects
- ISO-18473-1 - Functional pigments and extenders for special applications - Part 1: Nanoscale calcium carbonate for sealant application
- ISO-18473-2 - Functional pigments and extenders for special applications - Part 2: Nanoscale titanium dioxide for sunscreen application
- ISO-18473-3 - Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application
- ISO-18473-4 - Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application
- ISO-2040 - Strontium chromate pigments for paints
- ISO-20427 - Pigments and extenders - Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
- ISO-2068 - Barium chromate pigments for paints
- ISO-21683 - Pigments and extenders - Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics
- ISO-23157 - Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method
- ISO-23900-1 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction
- ISO-23900-2 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
- ISO-23900-3 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
- ISO-23900-4 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
- ISO-23900-5 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
- ISO-23900-6 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test
- ISO-2495 - Iron blue pigments - Specifications and methods of test
- ISO-3262-1 - Extenders - Specifications and methods of test - Part 1: Introduction and general test methods
- ISO-3262-10 - Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form
- ISO-3262-11 - Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates
- ISO-3262-12 - Extenders - Specifications and methods of test - Part 12: Muscovite-type mica
- ISO-3262-13 - Extenders - Specifications and methods of test - Part 13: Natural quartz (ground)
- ISO-3262-14 - Extenders - Specifications and methods of test - Part 14: Cristobalite
- ISO-3262-15 - Extenders - Specifications and methods of test - Part 15: Vitreous silica
- ISO-3262-16 - Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides
- ISO-3262-17 - Extenders - Specifications and methods of test - Part 17: Precipitated calcium silicate
- ISO-3262-18 - Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate
- ISO-3262-19 - Extenders - Specifications and methods of test - Part 19: Precipitated silica
- ISO-3262-2 - Extenders - Specifications and methods of test - Part 2: Baryte (natural barium sulfate)
- ISO-3262-20 - Extenders - Specifications and methods of test - Part 20: Fumed silica
- ISO-3262-21 - Extenders - Specifications and methods of test - Part 21: Silica sand (unground natural quartz)
- ISO-3262-22 - Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr
- ISO-3262-3 - Extenders - Specifications and methods of test - Part 3: Blanc fixe
- ISO-3262-4 - Extenders - Specifications and methods of test - Part 4: Whiting
- ISO-3262-5 - Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate
- ISO-3262-6 - Extenders - Specifications and methods of test - Part 6: Precipitated calcium carbonate
- ISO-3262-7 - Extenders - Specifications and methods of test - Part 7: Dolomite
- ISO-3262-8 - Extenders - Specifications and methods of test - Part 8: Natural clay
- ISO-3262-9 - Extenders - Specifications and methods of test - Part 9: Calcined clay
- ISO-3549 - Zinc dust pigments for paints - Specifications and test methods
- ISO-3711 - Lead chromate pigments and lead chromate-molybdate pigments - Specifications and methods of test
- ISO-4620 - Cadmium pigments - Specifications and methods of test
- ISO-4621 - Chrome oxide green pigments - Specifications and methods of test
- ISO-473 - Lithopone pigments - General requirements and methods of testing
- ISO-510 - Red lead for paints
- ISO-591-1 - Titanium dioxide pigments for paints -- Part 1: Specifications and methods of test
- ISO-6745 - Zinc phosphate pigments for paints - Specifications and methods of test
- ISO-7579 - Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
- ISO-787-1 - General methods of test for pigments and extenders - Part 1 : Comparison of colour of pigments
- ISO-787-10 - General methods of test for pigments and extenders - Part 10: Determination of density - Pyknometer method
- ISO-787-11 - General methods of test for pigments and extenders - Part 11 : Determination of tamped volume and apparent density after tamping
- ISO-787-13 - General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates
- ISO-787-13 THRU 18 - General Methods of Test for Pigments - Parts Xiii To Xviii
- ISO-787-14 - General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
- ISO-787-15 - General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types
- ISO-787-16 - General methods of test for pigments and extenders - Part 16 : Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method
- ISO-787-17 - General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments
- ISO-787-18 - General methods of test for pigments and extenders - Part 18 : Determination of residue on sieve - Mechanical flushing procedure
- ISO-787-19 - General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicylic acid method)
- ISO-787-2 - General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C
- ISO-787-21 - General methods of test for pigments and extenders - Part 21 : Comparison of heat stability of pigments using a stoving medium
- ISO-787-22 - General methods of test for pigments and extenders - Part 22 : Comparison of resistance to bleeding of pigments
- ISO-787-23 - General methods of test for pigments and extenders - Part 23 : Determination of density (using a centrifuge to remove entrained air)
- ISO-787-24 - General methods of test for pigments and extenders - Part 24 : Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods
- ISO-787-25 - General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method
- ISO-787-28 - General methods of tests for pigments and extenders - Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
- ISO-787-3 - General methods of test for pigments and extenders -- Part 3: Determination of matter soluble in water -- Hot extraction method
- ISO-787-4 - General methods of test for pigments and extenders - Part 4 : Determination of acidity or alkalinity of the aqueous extract
- ISO-787-5 - General methods of test for pigments and extenders - Part 5 : Determination of oil absorption value
- ISO-787-7 - General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure
- ISO-787-8 - General methods of test for pigments and extenders -- Part 8: Determination of matter soluble in water -- Cold extraction method
- ISO-787-9 - General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension
- ISO-788 - Ultramarine pigments
- ISO-8780-1 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction
- ISO-8780-2 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine
- ISO-8780-3 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill
- ISO-8780-4 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill
- ISO-8780-5 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller
- ISO-8780-6 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill
- ISO-8781-1 - Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments
- ISO-8781-2 - Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind
- ISO-8781-3 - Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss
Other SDOs:
- DIN-55678-2 - Paints, varnishes and similar coating materials; determination of pigment content; ashing method
- DIN-EN-12878 - Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test; German version EN 12878:2014
- DIN-EN-ISO-14680-1 - Part 1: Centrifuge Method, Paints and Varnishes - Determination of Pigment Content
- DIN-EN-ISO-14680-2 - Part 2: Ashing Method, Paints and Varnishes - Determination of Pigment Content
- DIN-EN-ISO-14680-3 - Part 3: Filtration Method, Paints & Varnishes - Determination of Pgiment Content
- DIN-EN-ISO-3549 - Zinc Dust Pigments for Paints, Specifications & Test Methods
- DIN-EN-ISO-787-25 - Part 25: Comparison of the Colour, in Full-Shade Systems, of White, Black & Coloured P
- EN-12878 - Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
- EN-ISO-10601 - Micaceous Iron Oxide Pigments for Paints, Specifications & Test Methods
- EN-ISO-1248 - Iron Oxide Pigments, Specifications & Methods of Test
- EN-ISO-14680-1 - Paints & Varnishes, Determination of Pigment Content, Centrifuge Method
- EN-ISO-14680-2 - Part 2: Ashing Method, Paints & Varnishes - Determination of Pigment Content
- EN-ISO-14680-3 - Part 3: Filtration Method, Paints & Varnishes - Determination of Pigment Content
- EN-ISO-18314-1 - Analytical colorimetry - Part 1: Practical colour measurement
- EN-ISO-18314-2 - Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
- EN-ISO-18314-3 - Analytical colorimetry - Part 3: Special indices
- EN-ISO-18451-1 - Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2019)
- EN-ISO-18451-2 - Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects
- EN-ISO-18473-1 - Functional pigments and extenders for special applications - Part 1: Nanoscale calcium carbonate for sealant application
- EN-ISO-18473-2 - Functional pigments and extenders for special applications - Part 2: Nanoscale titanium dioxide for sunscreen application
- EN-ISO-18473-3 - Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018)
- EN-ISO-23900-2 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
- EN-ISO-23900-3 - Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
- EN-ISO-23900-4 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
- EN-ISO-23900-5 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
- EN-ISO-23900-6 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test (ISO 23900-6:2015)
- EN-ISO-3262-5 - Extenders for Paints, Specifications & Methods of Test, Natural Crystalline Calcium Ca
- EN-ISO-7579 - Dyestuffs - Determination of Solubility in Organic Solvents - Gravimetric & Photometr
- EN-ISO-787-14 - General Methods of Test for Pigments & Extenders, Determination of Resistivity of Aque
- EN-ISO-787-17 - General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2019)
- EN-ISO-787-21 - General methods of test for pigments and extenders. Comparison of heat stability of pigments using a stoving medium
- EN-ISO-787-5 - Part 5: Determination of Oil Absorption Value, General Methods of Test for Pigments &
- EN-ISO-787-7 - Part 7: Determination of Residue on Sieve - Water Method - Manual Procedure, General M
- EN-ISO-787-9 - General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:2019)
- SIS-822161 - Klosettsits
- SIS-822162 - Vattenklosett med S-lås. Golvmodell
- SIS-822163 - Vattenklosett med S-lås. Golvmodell. Sjukhusklosett
- SIS-822164 - Vattenklosett med P-lås. Golvmodell
- SIS-822165 - Vattenklosett. Väggmodell
- SMS-2141 - ISO-tolerances. Shafts h1 - h16
- SMS-2160 - ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
- SMS-2163 - Radii under the head of screws and bolts. Metric series
- SMS-2164 - Dimensions of head for hexagon bolts. Metric screw threads
- SMS-2262 - Gas cylinders. Valve for gas cylinders for liquefied petroleum gas filling weight below 5 kg
- SMS-2264 - Gas cylinders. Valve for liquefied petroleum gas.Filling weight from 5 kg upwards
- SMS-2947 - Door and window fittings. Door closers. General technical requirements
- SMS-2949 - Door and window fittings. Mechanical door bottom sealers. General technical requirements
- SMS-2960 - Oorganiska ytbeläggningar - Emalj - Bedömning av emaljs beständighet mot kokande saltsyra
- SMS-2969 - Metallic and other non-organic coatings. Electroplated coatings of cadmium on iron and steel
- SMS-2973 - Oorganiska ytbeläggningar - Metallbelägg ningar - Bestämning av skikttjocklekgenom anodisk upplösning
- SS-EN-12878 - Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
- SS-EN-13900-1 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction
- SS-EN-13900-2 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determinations of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
- SS-EN-13900-3 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
- SS-EN-ISO-10601 - Micaceous iron oxide pigments for paints - Specifications and test methods (ISO 10601:2007)
- SS-EN-ISO-12215-8 - Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009, including Cor 1:2010)
- SS-EN-ISO-1247-1 - Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
- SS-EN-ISO-1247-2 - Aluminium pigments for paints - Part 2: Vacuum metallized aluminium pigments (ISO 1247-2:2021)
- SS-EN-ISO-1248 - Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)
- SS-EN-ISO-14680-1 - Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000)
- SS-EN-ISO-14680-2 - Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000)
- SS-EN-ISO-14680-3 - Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000)
- SS-EN-ISO-18314-1 - Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015)
- SS-EN-ISO-18314-2 - Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power (ISO 18314-2:2023)
- SS-EN-ISO-18314-3 - Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2022)
- SS-EN-ISO-18314-4 - Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2020)
- SS-EN-ISO-18451-1 - Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2019)
- SS-EN-ISO-18451-2 - Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO 18451-2:2018)
- SS-EN-ISO-18473-1 - Functional pigments and extenders for special applications - Part 1: Nanoscale calcium carbonate for sealant application (ISO 18473-1:2015)
- SS-EN-ISO-18473-2 - Functional pigments and extenders for special applications - Part 2: Nanoscale titanium dioxide for sunscreen application (ISO 18473-2:2015)
- SS-EN-ISO-18473-3 - Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018)
- SS-EN-ISO-18473-4 - Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
- SS-EN-ISO-21683 - Pigments and extenders - Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics (ISO 21683:2019)
- SS-EN-ISO-23157 - Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method (ISO 23157:2021)
- SS-EN-ISO-23900-1 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015)
- SS-EN-ISO-23900-2 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015)
- SS-EN-ISO-23900-3 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)
- SS-EN-ISO-23900-4 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling (ISO 23900-4:2015)
- SS-EN-ISO-23900-5 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test (ISO 23900-5:2015)
- SS-EN-ISO-23900-6 - Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test (ISO 23900-6:2015)
- SS-EN-ISO-2495 - Iron blue pigments - Specifications and methods of test (ISO 2495:1995)
- SS-EN-ISO-3262-1 - Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997)
- SS-EN-ISO-3262-10 - Extenders for paints - Specifications and methods of test - Part 10: Natural, talc/chlorite in lamellar form (ISO 3262-10:2000)
- SS-EN-ISO-3262-11 - Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000)
- SS-EN-ISO-3262-12 - Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2023)
- SS-EN-ISO-3262-13 - Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023)
- SS-EN-ISO-3262-14 - Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)
- SS-EN-ISO-3262-15 - Extenders - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2023)
- SS-EN-ISO-3262-16 - Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2023)
- SS-EN-ISO-3262-17 - Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000)
- SS-EN-ISO-3262-18 - Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2023)
- SS-EN-ISO-3262-19 - Extenders - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2021)
- SS-EN-ISO-3262-2 - Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:2023)
- SS-EN-ISO-3262-20 - Extenders - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2021)
- SS-EN-ISO-3262-21 - Extenders - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2023)
- SS-EN-ISO-3262-22 - Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
- SS-EN-ISO-3262-3 - Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
- SS-EN-ISO-3262-4 - Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2023)
- SS-EN-ISO-3262-5 - Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:2023)
- SS-EN-ISO-3262-6 - Extenders - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:2022)
- SS-EN-ISO-3262-7 - Extenders - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:2023)
- SS-EN-ISO-3262-8 - Extenders - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:2023)
- SS-EN-ISO-3262-9 - Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)
- SS-EN-ISO-3549 - Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995)
- SS-EN-ISO-473 - Lithopone pigments - General requirements and methods of testing (ISO 473:2019)
- SS-EN-ISO-591-1 - Titanium dioxid pigments for paints - Specifications and methods of test (ISO 591-1:2000)
- SS-EN-ISO-7579 - Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009)
- SS-EN-ISO-787-1 - General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
- SS-EN-ISO-787-10 - General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993)
- SS-EN-ISO-787-11 - SAKNAS
- SS-EN-ISO-787-13 - General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates (ISO 787-13:2019)
- SS-EN-ISO-787-14 - General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2019)
- SS-EN-ISO-787-15 - General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:2019)
- SS-EN-ISO-787-16 - General methods of test for pigments and extenders - Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method (ISO 787-16:1986)
- SS-EN-ISO-787-17 - General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2019)
- SS-EN-ISO-787-18 - General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure (ISO 787-18:1983)
- SS-EN-ISO-787-19 - General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicylic acid method) (ISO 787-19:2020)
- SS-EN-ISO-787-2 - General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:2021)
- SS-EN-ISO-787-21 - General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium (ISO 787-21:1979)
- SS-EN-ISO-787-22 - General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980)
- SS-EN-ISO-787-23 - General methods ot test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979)
- SS-EN-ISO-787-24 - General methods ot test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods (ISO 787-24:1985)
- SS-EN-ISO-787-25 - General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019)
- SS-EN-ISO-787-28 - General methods of tests for pigments and extenders - Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS (ISO 787-28:2019)
- SS-EN-ISO-787-3 - General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water - Hot extraction method (ISO 787-3:1979)
- SS-EN-ISO-787-4 - General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981)
- SS-EN-ISO-787-5 - General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980)
- SS-EN-ISO-787-7 - General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
- SS-EN-ISO-787-8 - General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water - Cold extraction method (ISO 787-8:1979)
- SS-EN-ISO-787-9 - General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:2019)
- SS-EN-ISO-788 - Ultramarine pigments (ISO 788:2021)
- SS-EN-ISO-8780-1 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990)
- SS-EN-ISO-8780-2 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990)
- SS-EN-ISO-8780-3 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990)
- SS-EN-ISO-8780-4 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990)
- SS-EN-ISO-8780-5 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990)
- SS-EN-ISO-8780-6 - Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990)
- SS-EN-ISO-8781-1 - Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tintingstrength of coloured pigments (ISO 8781-1:1990)
- SS-EN-ISO-8781-2 - Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990)
- SS-EN-ISO-8781-3 - Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990)
- SS-ISO-787-1 - General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments