Document Center List of Standards on Sanitary Installations Including Bidets, Kitchen Sinks, Baths, Waste Chutes, Etc.
ICS Code 91.140.70
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1015 - Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
- ASTM-A1045 - Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
- ASTM-A1111 - Standard Specification for Cast Iron Closet Flanges for Use with Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
- ASTM-F446 - Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
- ASTM-F462 - Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities (Withdrawn 2016)
BSI:
- BS-1125 - Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)
- BS-1184 - Specification. Copper and copper alloy traps.
- BS-1188 - Specification for ceramic wash basins and pedestals
- BS-1189 - Specification for baths made from porcelain enamelled cast iron
- BS-1206 - Specification for fireclay sinks: dimensions and workmanship
- BS-1244-2 - Metal sinks for domestic purposes. Specification for sit-on and inset sinks
- BS-1254 - Specification for WC seats (plastics)
- BS-1329 - Specification for Metal Hand Rinse Basins
- BS-1390 - Specification for baths made from vitreous enamelled sheet steel
- BS-1703 - Refuse chutes and hoppers. Specification
- BS-1876 - Specification for automatic flushing cisterns for urinals
- BS-2081-1 - Closets for use with chemicals
- BS-2081-2 - Closets for use with chemicals
- BS-2893 - Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts)
- BS-3402 - Specification for quality of vitreous china sanitary appliances
- BS-4305-2 - Baths for domestic purposes made of acrylic material
- BS-4880-1 - Specification for urinals. Stainless steel slab urinals
- BS-5412 - Specification for low-resistance single taps and combination tap assemblies (nominal size and ) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0.1 bar)
- BS-5503-2 - Vitreous china washdown WC pans with horizontal outlet. Materials, quality, performance and dimensions other than connecting dimensions
- BS-5503-3 - Vitreous china washdown WC pans with horizontal outlet. Specification for WC pans with horizontal outlet for use with 7.5 L maximum flush capacity cisterns
- BS-5504-3 - Wall hung WC pan. Wall hung WC pan. Materials, quality and functional dimensions other than connecting dimensions
- BS-5504-4 - Wall hung WC pan. Specification for wall hung WC pans for use with 7.5 L maximum flush capacity cisterns
- BS-5505-3 - Specification for bidets
- BS-5506-3 - Specification for wash basins
- BS-5520 - Specification for vitreous china bowl urinals (rimless type)
- BS-5627 - Specification for plastics connectors for use with horizontal outlet vitreous china WC pans
- BS-6100-3.3 - Glossary of building and civil engineering terms. Services
- BS-6340-1 - Shower units
- BS-6340-2 - Shower units
- BS-6340-3 - Shower Units, Specification for Prefabricated Shower Enclosures & Shower Cabinets
- BS-6340-5 - Shower units. Specification for prefabricated shower trays made from acrylic material
- BS-6340-6 - Shower units. Specification for prefabricated shower trays made from porcelain enamelled cast iron
- BS-6340-7 - Shower units. Specification for prefabricated shower trays made from vitreous enamelled sheet steel
- BS-6340-8 - Shower units. Specification for prefabricated shower trays made from glazed ceramic
- BS-6465-1 - Sanitary installations
- BS-6465-2 - Sanitary installations
- BS-6465-3 - Sanitary installations
- BS-6465-3-TC - Tracked Changes. Sanitary installations
- BS-7357 - Specification for 7.5 L WC flushing cisterns
- BS-7358 - Specification for close coupled suites with flush capacity of 7.5 L maximum
- BS-7942 - Thermostatic mixing valves for use in care establishments. Requirements and test methods
- BS-8445 - Bath and shower mats. Testing. Assessment of slip resistance properties
- BS-EN-111 - Wall-hung hand rinse basins. Connecting dimensions
- BS-EN-1111 - Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification
- BS-EN-1111-TC - Tracked Changes. Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification
- BS-EN-1113 - Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
- BS-EN-1113-TC - Tracked Changes. Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
- BS-EN-12056-2 - Gravity drainage systems inside buildings
- BS-EN-12541 - Sanitary tapware. Pressure flushing valves and automatic closing urinal valves PN 10
- BS-EN-12764 - Sanitary appliances. Specification for whirlpool baths
- BS-EN-1286 - Sanitary tapware. Low pressure mechanical mixing valves. General technical specification
- BS-EN-1287 - Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification
- BS-EN-1287-TC - Tracked Changes. Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification
- BS-EN-13310 - Kitchen sinks. Functional requirements and test methods
- BS-EN-13407 - Wall-hung urinals. Functional requirements and test methods
- BS-EN-13558 - Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
- BS-EN-13559 - Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
- BS-EN-13904 - Low resistance shower outlets for sanitary tapware
- BS-EN-13905 - Low resistance shower hoses for sanitary tapware
- BS-EN-14055 - WC and urinal flushing cisterns
- BS-EN-14055-TC - Tracked Changes. WC and urinal flushing cisterns
- BS-EN-14124 - Inlet valves for flushing cisterns with internal overflow
- BS-EN-14296 - Sanitary appliances. Communal washing troughs
- BS-EN-14428 - Shower enclosures. Functional requirements and test methods
- BS-EN-14516 - Baths for domestic purposes
- BS-EN-14527 - Shower trays for domestic purposes
- BS-EN-14528 - Bidets. Functional requirements and test methods
- BS-EN-14688 - Sanitary appliances. Wash basins. Functional requirements and test methods
- BS-EN-15091 - Sanitary tapware. Electronic opening and closing sanitary tapware
- BS-EN-15091-TC - Tracked Changes. Sanitary tapware. Electronic opening and closing sanitary tapware
- BS-EN-15200 - Sanitary appliances. Multifunction shower cabinets
- BS-EN-15334 - Sanitary appliances. Methacrylic dispersions of high filler content
- BS-EN-15389 - Industrial valves. Performance characteristics of thermoplastic valves when used as construction products
- BS-EN-15636 - Sanitary appliances. Shower trays made from impact modified extruded acrylic sheets. Requirements and test methods
- BS-EN-15719 - Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
- BS-EN-15719-TC - Tracked Changes. Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
- BS-EN-15720 - Sanitary appliances. Shower trays made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
- BS-EN-16145 - Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification
- BS-EN-16146 - Sanitary tapware. Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2. General technical specification
- BS-EN-16578 - Ceramics sanitary appliances. Sustainability assessment
- BS-EN-17125 - Domestic spas/whirlpool spas/hot tubs. Safety requirements and test methods
- BS-EN-198 - Sanitary appliances. Baths made from crosslinked cast acrylic sheets. Requirements and test methods
- BS-EN-200 - Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
- BS-EN-200-TC - Tracked Changes. Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification
- BS-EN-232 - Baths. Connecting dimensions
- BS-EN-246 - Sanitary tapware. General specifications for aerators
- BS-EN-246-TC - Tracked Changes. Sanitary tapware. General specifications for aerators
- BS-EN-248 - Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr
- BS-EN-249 - Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets. Requirements and test methods
- BS-EN-251 - Shower trays. Connecting dimensions
- BS-EN-263 - Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
- BS-EN-274-1 - Waste fittings for sanitary appliances
- BS-EN-274-2 - Waste fitting for sanitary appliances
- BS-EN-274-3 - Waste fittings for sanitary appliances
- BS-EN-31 - Wash basins. Connecting dimensions
- BS-EN-32 - Wall-Hung Wash Basins - Connecting Dimensions
- BS-EN-33 - WC pans and WC suites. Connecting dimensions
- BS-EN-35 - Pedestal and wall-hung bidets with over-rim supply. Connecting dimensions
- BS-EN-36 - Wall-hung bidets with over-rim supply. Connecting dimensions
- BS-EN-60335-2-84 - Household and similar electrical appliances. Safety
- BS-EN-60745-2-21 - Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
- BS-EN-62841-2-21 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-695 - Kitchen sinks. Connecting dimensions
- BS-EN-80 - Wall-hung urinals. Connecting dimensions
- BS-EN-816 - Sanitary tapware. Automatic shut-off valves PN 10
- BS-EN-816-TC - Tracked Changes. Sanitary tapware. Automatic shut-off valves PN 10
- BS-EN-817 - Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications
- BS-EN-997 - WC pans and WC suites with integral trap
- BS-EN-997-TC - Tracked Changes. WC pans and WC suites with integral trap
- BS-EN-IEC-60335-2-84 - Household and similar electrical appliances
- BS-ISO-30500 - Non-sewered sanitation systems. Prefabricated integrated treatment units. General safety and performance requirements for design and testing
- PD-CEN-17221 - Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances
- PD-CEN-17426 - Sanitary appliances. Drainage systems for the application of sanitary appliances
IEC:
- IEC-60335-2-84 - Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
- IEC-60335-2-84-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets
- IEC-60335-2-84-2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
- IEC-60335-2-84-RL - Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
- IEC-60745-2-21 - Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
- IEC-60745-2-21-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
ISO:
- ISO-30500 - Non-sewered sanitation systems - Prefabricated integrated treatment units - General safety and performance requirements for design and testing
- ISO-30500 FRENCH - Non-sewered sanitation systems - Prefabricated integrated treatment units - General safety and performance requirements for design and testing [Standard in French]
Other SDOs:
- DIN-EN-12764 - Sanitary appliances - Specification for whirlpool baths; German version EN 12764:2015
- DIN-EN-13310 - Kitchen sinks - Functional requirements and test methods; German version EN 13310:2015
- DIN-EN-13407 - Wall-hung urinals - Functional requirements and test methods; German version EN 13407:2015
- DIN-EN-14124 - Inlet Valves for Flushing Cisterns With Internal Overflow
- DIN-EN-14296 - Sanitary appliances - Communal washing troughs; German version EN 14296:2015
- DIN-EN-14428 - Shower enclosures - Functional requirements and test methods; German version EN 14428:2015
- DIN-EN-14428/SUP 1 - Shower enclosures - Functional requirements and test methods; Supplement 1: Explanations to DIN EN 14428:2005-02
- DIN-EN-14516 - Baths for domestic purposes; German version EN 14516:2015
- DIN-EN-14527 - Shower trays for domestic purposes; German version EN 14527:2016
- DIN-EN-14528 - Bidets - Functional requirements and test methods; German version EN 14528:2015
- DIN-EN-14688 - Sanitary appliances - Wash basins - Functional requirements and test methods; German version EN 14688:2015
- DIN-EN-15091 - Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2013
- DIN-EN-15334 - Sanitary Appliances - Methacrylic Dispersions of High Filler Content
- DIN-EN-200 - Sanitary Tapware - Single Taps & Combination Taps for Water Supply Systems of Type 1
- DIN-EN-232 - Baths - Connecting dimensions; German version EN 232:2012
- DIN-EN-248 - Sanitary Tapware, General Specification for Electrodepositedcoatings of NI-Cr, English
- DIN-EN-251 - Shower trays - Connecting dimensions; German version EN 251:2012
- DIN-EN-263 - Sanitary Appliances - Crosslinked Cast Acrylic Sheets for Baths & Shower Trays for Dom
- DIN-EN-33 - WC pans and WC suites - Connecting dimensions
- DIN-EN-695 - Kitchen Sinks, Connecting Dimensions
- DIN-EN-997 - WC pans and WC suites with integral trap; German version EN 997:2012+A1:2015
- EN-111 - Wall-Hung Hand Rinse Basins, Connecting Dimensions
- EN-1111 - Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
- EN-1113 - Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
- EN-12541 - Sanitary Tapware, Pressure Flushing Valves & Automatic Closing Urinal Valves Pn 10
- EN-12764 - Sanitary appliances - Specification for whirlpool baths
- EN-1286 - Sanitary Tapware - Low Pressure Mixing Valves - General Technical Specification
- EN-1287 - Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification
- EN-13310 - Kitchen sinks - Functional requirements and test methods
- EN-13407 - Wall-hung urinals - Functional requirements and test methods
- EN-14055 - WC and urinal flushing cisterns
- EN-14124 - Inlet Valves for Flushing Cisterns With Internal Overflow
- EN-14296 - Sanitary appliances - Communal washing troughs
- EN-14428 - Shower enclosures - Functional requirements and test methods
- EN-14516 - Baths for domestic purposes
- EN-14527 - Shower trays for domestic purposes
- EN-14528 - Bidets - Functional requirements and test methods
- EN-14688 - Sanitary appliances - Wash basins - Functional requirements and test methods
- EN-15091 - Sanitary tapware - Electronic opening and closing sanitary tapware
- EN-15200 - Sanitary appliances - Multifunction shower cabinets
- EN-15334 - Sanitary Appliances - Methacrylic Dispersions of High Filler Content
- EN-15389 - Industrial Valves, Performance Characteristics of Thermoplastic Valves When Used as Co
- EN-15636 - Sanitary Appliances - Shower Trays Made From Impact Modified Extruded Acrylic Sheets -
- EN-15719 - Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
- EN-15720 - Sanitary Appliances - Shower Trays Made From Impact Modified Coextruded Abs/Acrylic Sh
- EN-16145 - Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
- EN-16146 - Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification
- EN-16578 - Ceramics sanitary appliances - Sustainability assessment
- EN-198 - Sanitary Appliances - Baths Made From Crosslinked Cast Acrylic Sheets - Requirements &
- EN-200 - Sanitary Tapware, Single Taps & Combination Taps for Water Supply Systems of Type 1 &
- EN-232 - Baths - Connecting dimensions
- EN-246 - Sanitary Tapware: General Specifications for Flow Rate Regulators
- EN-249 - Sanitary Appliances - Shower Trays Made From Crosslinked Cast Acrylic Sheets - Require
- EN-251 - Shower trays - Connecting dimensions
- EN-263 - Sanitary Appliances - Crosslinked Cast Acrylic Sheets for Baths & Shower Trays for Dom
- EN-31 - Wash basins - Connecting dimensions
- EN-33 - WC pans and WC suites - Connecting dimensions
- EN-60335-2-84 - Particular Requirements for Toilets, Safety of Household & Similar Electrical Applianc
- EN-60745-2-21 - Part 2-21: Particular Requirements for Drain Cleaners, Hand-Held Motor-Operated Electr
- EN-695 - Kitchen Sinks, Connecting Dimensions
- EN-816 - Sanitary tapware - Automatic shut-off valves PN 10
- EN-817 - Sanitary Tapware, Mechanical Mixing Valves (Pn 10), General Technical Specifications
- EN-997 - WC pans and WC suites with integral trap
- IWA-24 - Non-sewered sanitation systems - General safety and performance requirements for design and testing
- JIS-A-4422 - Toilet seat with shower unit
- JIS-A-5712 - Glass fiber reinforced plastic bathtubs connected with floor
- SIS-823056 - Furnishing and fittings for nursery schools. Sink
- SIS-CEN-17426 - Sanitary appliances - Drainage systems for the application of sanitary appliances
- SS-820000 - Sanitary tapware - Method for determination of energy efficiency of mechanical basin and sink mixing valves
- SS-820001 - Sanitary tapware - Method for determination of energy efficiency of thermostatic mixing valves with shower
- SS-820200 - Sanitary appliances - Prefabricated installation modules for wall-hung WC pans - Requirements and test methods
- SS-822022 - Pedestal wash basins - Connecting dimensions
- SS-822024 - Wall hung wash basins - Connecting dimensions
- SS-822025 - Wall hung hand rinse basins - Connecting dimensions
- SS-822031 - Pedestal bidets over rim supply only - Connectingdimensions
- SS-822032 - Wall hung bidets over rim supply only - Connecting dimensions
- SS-822041 - Baths - Connecting dimensions
- SS-822042 - Shower trays - Connecting dimensions
- SS-822061 - Wall hung urinals without built-in traps - Connecting dimensions
- SS-EN-111 - Wall-hung hand rinse basins - Connecting dimensions
- SS-EN-1111 - Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
- SS-EN-1112 - Sanitary tapware - Shower outlets for sanitary tapware for water supply systems type 1 and type 2 - General technical specification
- SS-EN-1113 - Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
- SS-EN-12541 - Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
- SS-EN-12764 - Sanitary appliances - Specification for whirlpool baths
- SS-EN-1286 - Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
- SS-EN-1287 - Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification
- SS-EN-13310 - Kitchen sinks - Functional requirements and test methods
- SS-EN-13407 - Wall-hung urinals - Functional requirements and test methods
- SS-EN-13558 - Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
- SS-EN-13559 - Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
- SS-EN-13904 - Low resistance shower outlets for sanitary tapware
- SS-EN-13905 - Low resistance shower hoses for sanitary tapware
- SS-EN-14055 - WC and urinal flushing cisterns
- SS-EN-14124 - Inlet valves for flushing cisterns with internal overflow
- SS-EN-14296 - Sanitary appliances - Communal washing troughs
- SS-EN-14428 - Shower enclosures - Functional requirements and test methods
- SS-EN-14516 - Baths for domestic purposes
- SS-EN-14527 - Shower trays for domestic purposes
- SS-EN-14528 - Bidets - Functional requirements and test methods
- SS-EN-14688 - Sanitary appliances - Wash basins - Functional requirements and test methods
- SS-EN-15091 - Sanitary tapware - Electronic opening and closing sanitary tapware
- SS-EN-15200 - Sanitary appliances - Multifunction shower cabinets
- SS-EN-15334 - Sanitary appliances - Methacrylic dispersions of high filler content
- SS-EN-15389 - Industrial valves - Performance characteristics of thermoplastic valves when used as construction products
- SS-EN-15636 - Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods
- SS-EN-15719 - Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
- SS-EN-15720 - Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
- SS-EN-16145 - Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
- SS-EN-16146 - Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification
- SS-EN-16578 - Ceramics sanitary appliances - Sustainability assessment
- SS-EN-17125 - Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
- SS-EN-198 - Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods
- SS-EN-200 - Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
- SS-EN-232 - Baths - Connecting dimensions
- SS-EN-246 - Sanitary tapware - General specifications for aerators
- SS-EN-248 - Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
- SS-EN-249 - Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods
- SS-EN-251 - Shower trays - Connecting dimensions
- SS-EN-263 - Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
- SS-EN-274 - Sanitary tapware - Waste fittings for basin, bidets and baths - General technical specifications
- SS-EN-274-1 - Waste fittings for sanitary appliances - Part 1: Requirements
- SS-EN-274-2 - Waste fittings for sanitary appliances - Part 2: Test methods
- SS-EN-274-3 - Waste fittings for sanitary appliances - Part 3: Quality control
- SS-EN-31 - Wash basins - Connecting dimensions
- SS-EN-32 - Wall-hung wash basins - Connecting dimensions
- SS-EN-329 - Sanitary tapware - Waste fittings for shower trays - General technical specifications
- SS-EN-33 - WC pans and WC suites - Connecting dimensions
- SS-EN-34 - Wall hung W.C pan with close coupled cistern - Connecting dimensions
- SS-EN-35 - Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions
- SS-EN-36 - Wall-hung bidets with over-rin supply - Connecting dimensions
- SS-EN-37 - Pedestal W.C. pans with independent water supply - Connecting dimensions
- SS-EN-38 - Wall hung W.C. pan with independent water supply - Connecting dimensions
- SS-EN-411 - Sanitary tapware - Waste fittings for sinks - General technical specification
- SS-EN-695 - Kitchen sinks - Connecting dimensions
- SS-EN-80 - Wall-hung urinals - Connecting dimensions
- SS-EN-816 - Sanitary tapware - Automatic shut-off valves PN 10
- SS-EN-817 - Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
- SS-EN-932-5 - Tests for general properties of aggregates - Part 5: Common equipment and calibration
- SS-EN-934-3 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
- SS-EN-997 - WC pans and WC suites with integral trap
- SS-EN-997-AM1 - WC pans and WC suites with integral trap
- SS-EN-ISO-13904 - Animal feeding stuffs - Determination of tryptophan content (ISO 13904:2016)
- SS-EN-ISO-14688-1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017)
- SS-EN-ISO-14688-1-AM1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description - Amendment 1 (ISO 14688-1:2002/Amd 1:2013)
- SS-EN-ISO-9047 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001)
- SS-ISO-15989 - Plastics - Films and sheeting - Measurement of water-contact angle of corona-treated films (ISO 15989:2004, IDT)
- UNE-EN-12764 - Sanitary appliances - Specification for whirlpool baths
- UNE-EN-14055 - WC and urinal flushing cisterns
- UNE-EN-14296 - Sanitary appliances - Communal washing troughs
- UNE-EN-14428 - Shower enclosures - Functional requirements and test methods
- UNE-EN-14528 - Bidets - Functional requirements and test methods
- UNE-EN-14688 - Sanitary appliances - Wash basins - Functional requirements and test methods
- UNE-EN-15719 - Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
- UNE-EN-997 - WC pans and WC suites with integral trap