Document Center List of Standards on Construction Technology Including Measuring Methods, Construction Sites, Demolition Of Structures, Etc.
ICS Code 91.200
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D4756 - Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
- ASTM-D7392 - Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
- ASTM-E2691 - Standard Practice for Job Productivity Measurement
- ASTM-E3073 - Standard Guide for Development of Waste Management Plan for Construction, Deconstruction, or Demolition Projects
BSI:
- BS-10175 - Investigation of potentially contaminated sites. Code of practice
- BS-1139-3 - Metal scaffolding. Specification for prefabricated access and working towers
- BS-4363 - Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites
- BS-4447 - Specification for the Performance of Prestressing Anchorages for Post-Tensioned Constr
- BS-5228-1 - Code of practice for noise and vibration control on construction and open sites
- BS-5228-2 - Code of practice for noise and vibration control on construction and open sites
- BS-5228-3 - Code of Practice Applicable To Surface Coal Extraction by Opencast Methods
- BS-5228-4 - Code of Practice for Noise & Vibration Control Applicable To Piling Operations
- BS-5228-5 - Noise & Vibration Control on Construction & Open Sites, Code of Practice Applicable To
- BS-5607 - Code of practice for the safe use of explosives in the construction industry
- BS-5607-TC - Tracked Changes. Code of practice for the safe use of explosives in the construction industry
- BS-5930 - Code of practice for ground investigations
- BS-6100-1.5.3 - Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Setting out and measurement
- BS-6187 - Code of practice for full and partial demolition
- BS-7375 - Distribution of electricity on construction and demolition sites. Code of practice
- BS-8000-0 - Workmanship on construction sites
- BS-8000-1 - Workmanship on building sites
- BS-8000-12 - Workmanship on building sites
- BS-8000-13 - Workmanship on building sites
- BS-8000-14 - Workmanship on building sites
- BS-8000-15 - Workmanship on building sites
- BS-8000-16 - Workmanship on building sites
- BS-8000-3 - Workmanship on construction sites
- BS-8000-3/BS-8000-0 KIT - Workmanship on construction sites
- BS-8000-5 - Workmanship on building sites
- BS-8000-6-TC - Tracked Changes. Workmanship on construction sites
- BS-8000-7 - Workmanship on building sites
- BS-8000-8 - Workmanship on construction sites
- BS-8000-9 - Workmanship on building sites
- BS-8081 - Code of practice for grouted anchors
- BS-8410 - Code of practice for lightweight temporary cladding for weather protection and containment on construction works
- BS-8411 - Safety nets on construction sites and other works. Code of practice
- BS-8485 - Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings
- BS-EN-1004-1 - Mobile access and working towers made of prefabricated elements
- BS-EN-12629-3 - Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety
- BS-EN-16508 - Temporary works equipment. Encapsulation constructions. Performance requirements and general design
- BS-EN-996 - Piling equipment. Safety requirements
- BSI-FLEX-260 - Built environment. Digital twins overview and principles
- BS-ISO-7078 - Buildings and civil engineering works. Procedures for setting out, measurement and surveying. Vocabulary
- PP-5930 - Site investigations. Guide to BS 5930:1999 Code of practice for site investigations, for higher education
- PP-5930 (PACK OF 5) - Site investigations. Guide to BS 5930:1999 Code of practice for site investigations, for higher education
ISO:
- ISO-12491 - Statistical methods for quality control of building materials and components
- ISO-3443-1 - Tolerances for building -- Part 1 : Basic principles for evaluation and specification
- ISO-3443-2 - Tolerances for building -- Part 2 : Statistical basis for predicting fit between components having a normal distribution of sizes
- ISO-3443-3 - Tolerances for building -- Part 3 : Procedures for selecting target size and predicting fit
- ISO-3443-4 - Tolerances for building -- Part 4 : Method for predicting deviations of assemblies and for allocation of tolerances
- ISO-3443-5 - Building construction -- Tolerances for building -- Part 5 : Series of values to be used for specification of tolerances
- ISO-3443-6 - Tolerances for building -- Part 6 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 1
- ISO-3443-7 - Tolerances for building -- Part 7 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 2 (Statistical control method)
- ISO-3443-8 - Tolerances for building -- Part 8: Dimensional inspection and control of construction work
- ISO-4463-1 - Measurement methods for building -- Setting-out and measurement -- Part 1: Planning and organization, measuring procedures, acceptance criteria
- ISO-4463-2 - Measurement methods for building -- Setting-out and measurement -- Part 2: Measuring stations and targets
- ISO-4463-3 - Measurement methods for building -- Setting-out and measurement -- Part 3: Check-lists for the procurement of surveys and measurement services
- ISO-7077 - Measuring methods for building -- General principles and procedures for the verification of dimensional compliance
- ISO-7078 - Buildings and civil engineering works - Procedures for setting out, measurement and surveying - Vocabulary
- ISO-7727 - Joints in building -- Principles for jointing of building components -- Accommodation of dimensional deviations during construction
- ISO-7976-1 - Tolerances for building -- Methods of measurement of buildings and building products -- Part 1: Methods and instruments
- ISO-7976-2 - Tolerances for building -- Methods of measurement of buildings and building products -- Part 2: Position of measuring points
Other SDOs:
- EN-16508 - Temporary works equipment - Encapsulation constructions - Performance requirements and general design
- SIS-CEN/TR-15563 - Temporary works equipment - Recommendations for achieving health and safety
- SIS-CEN/TS-17440 - Assessment and retrofitting of existing structures
- SIS-CEN/TS-19101 - Design of fibre-polymer composite structures
- SS-EN-12111 - Tunnelling machines - Road headers and continuous miners - Safety requirements
- SS-EN-1263-1 - Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
- SS-EN-12810-2 - Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design
- SS-EN-12811-1 - Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design
- SS-EN-12811-2 - Temporary works equipment - Part 2: Information on materials
- SS-EN-12811-3 - Temporary works equipment - Part 3: Load testing
- SS-EN-12813 - Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design
- SS-EN-131-2 - Ladders - Part 2: Requirements, testing, marking
- SS-EN-131-3 - Ladders - Part 3: Marking and user instructions
- SS-EN-131-4 - Ladders - Part 4: Single or multiple hinge-joint ladders
- SS-EN-13270 - Surface active agents - Determination of the active matter content in alkyldimethylbetaines
- SS-EN-13374 - Temporary edge protection systems - Product specification - Test methods
- SS-EN-16508 - Temporary works equipment - Encapsulation constructions - Performance requirements and general design
- SS-EN-16719 - Transport platforms
- SS-EN-74 - Couplers, loose spigots and baseplates for use inworking scaffolds and falsework made of steel tubes - Requirements and test procedures
- SS-HD-1000 - Service and working scaffolds made of prefabricated elements - Materials, dimensions, design loads and safety requirements
- SS-HD-1004 - Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads and safety requirements
- SS-ISO-17455 - Plastics piping systems - Multilayer pipes - Determination of the oxygen permeability of the barrier pipe (ISO 17455:2005, IDT)
- SS-ISO-3443-5 - Building construction - Tolerances for building -Part 5: Series or values to be used for specification of tolerances
- SS-ISO-4172 - Building and civil engineering drawings - Drawings for the assembly of prefabricated structures
- SS-ISO-7077 - Measuring methods for building - General principles and procedures for the verification of dimensional compliance
- SS-ISO-7078 - Building construction - Procedures for setting out, measurement and surveying - Vocabulary and guidance notes