ASTM-C114 Historical Revision Information
Standard Test Methods for Chemical Analysis of Hydraulic Cement

ASTM-C114 - 2011B(E1) EDITION - SUPERSEDED -- See the following: ASTM-C228
Show Complete Document History

Document Center Inc. is an authorized dealer of ASTM standards.
The following bibliographic material is provided to assist you with your purchasing decision:


These test methods cover the chemical analyses of hydraulic cements. Specific chemical test methods are grouped as reference test methods and alternative test methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements and are also required for referee analysis in those cases where conformance to chemical specification requirements are questioned. Apparatus and materials for the test method include balance, weights, glassware and laboratory containers, desiccators, filter paper, crucibles, and muffle furnace. Standard reagents for the test method shall be used within the limits of the specification. These reagents shall include purity agents, water, repackaged reagents, concentrated acids and ammonium hydroxide, nonstandardized solutions, and indicator solutions. Sample preparation and general test procedures shall be followed according to the specification. General procedures include sample weighing, taring of crucibles, weighing of ignited residues, volatilization of platinum, chemical analyses, and calculation. Reporting of analyses shall be of the following order: major components, minor components, and separate determinations. Reference test methods and procedures include determination of insoluble residue, silicon dioxide, ammonium hydroxide group, ferric oxide, phosphorus pentoxide, titanium dioxide, zinc oxide, aluminum oxide, calcium oxide, magnesium oxide, sulfur, loss on ignition, sodium and potassium oxides, manganic oxide, chloride, chloroform-soluble organic substances. Alternative test methods and procedures include determination of calcium oxide, calcium dioxide, magnesium oxide, loss on ignition, titanium dioxide, phosphorus pentoxide, manganic oxide, and free calcium oxide. The standardization used for qualification and for analysis of each constituent shall be determined by valid curve-fitting procedures.

ORDER

Scope

1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.

1.2 Contents:


Section

Subject

2

Referenced Documents

4

Description of Referee Analyses

4.1

Referee Analyses

5

Qualification for Different Analyses

5.1

Certified Reference Materials

5.2

Requirements for Qualification Testing

5.3

Alternative Analyses

5.4

Performance Requirements for Rapid Test Methods

6

General

6.1

Interferences and Limitations

6.2

Apparatus and Materials

6.3

Reagents

6.4

Sample Preparation

6.5

General Procedures

6.6

Recommended Order for Reporting Analyses

 

Reference Test Methods

7

Insoluble Residue

8

Silicon Dioxide

8.2

Cements with Insoluble Residue Less Than 1 %

8.3

Cements with Insoluble Residue Greater Than 1 %

9

Ammonium Hydroxide Group

10

Ferric Oxide

11

Phosphorus Pentoxide

12

Titanium Dioxide

13

Zinc Oxide

14

Aluminum Oxide

15

Calcium Oxide

16

Magnesium Oxide

17

Sulfur

17.1

Sulfur Trioxide

17.2

Sulfide

18

Loss On Ignition

18.1

Portland Cement

18.2

Portland Blast-Furnace Slag Cement and Slag Cement

19

Sodium and Potassium Oxides

19.1

Total Alkalis

19.2

Water-Soluble Alkalis

20

Manganic Oxide

21

Chloride

22

Chloroform-Soluble Organic Substances

 

Alternative Test Methods

23

Calcium Oxide

24

Carbon Dioxide

25

Magnesium Oxide

26

Loss on Ignition

26.1

Portland Blast-Furnace Slag Cement and Slag Cement

27

Titanium Dioxide

28

Phosphorus Pentoxide

29

Manganic Oxide

30

Free Calcium Oxide

Appendices

Title

Appendix X1

Example of Determination of Equivalence Point
 for the Chloride Determination

Appendix X2

CO2 Determinations in Hydraulic Cements




1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 8.3.2.1 and 16.4.1 for specific caution statements.

Keywords

chemical analysis; compositional analysis; hydraulic cements; ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

To find similar documents by ASTM Volume:

04.01 (Cement; Lime; Gypsum)

To find similar documents by classification:

91.100.10 (Cement. Gypsum. Lime. Mortar)

This document comes with our free Notification Service, good for the life of the document.

This document is available in either Paper or PDF format.

Document Number

ASTM-C114-11be1

Revision Level

2011B(E1) EDITION

Status

Superseded

Modification Type

Editorially changed

Publication Date

Aug. 15, 2013

Document Type

Test Method

Page Count

33 pages

Committee Number

C01.23