| Standard: | Title: |
|---|
| NASM 525 (Formerly AN 525) |
Screw - Washer Head |
| AS 3582 (Formerly MS 9068) |
Packing, Preformed - O-Ring Seal, AMS 3304 |
| NASM 15795 (Formerly MS 15795) |
Washer, Flat-Metal, Round General Purpose |
| NASM 16562 (Formerly MS 16562) |
Pin, Spring-Tubular, Slotted |
| MS 20001 |
Hinge, Butt, Structural, Extruded |
| MS 20257 |
Hinge, Continuous |
| NASM 20392 (Formerly MS 20392) |
Pin, Straight, Headed Drilled Shank |
| NASM 21047 (Formerly MS 21047) |
Nut, Self-Locking, Plate, Two-Lug, Low Height, Steel, 125 KSI FTU, 450 Degrees F. |
| NASM 21059 (Formerly MS 21059) |
Nut, Self-locking, Plate, Two Lug, Floating, Low Height Steel, 125 KSI Ftu, 450 F. |
| NASM 21060 ()Formerly MS 21060) |
Nut, Self-locking, Plate, Two Lug, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Degree F And 800 Degree F. |
| NASM 21075 (Formerly MS 21075) |
Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 KSI FTU, 450 F. |
| NASM 21076 (Formerly MS 21076) |
Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing,Low Height, Cres, 125 KSI FTU, 450 F. and 800 F. |
| NASM 21083 (Formerly MS 21083) |
Nut, Self-Locking, Hexagon, Non-Metallic Insert, Low Height, 250 F. |
| NASM 21250 (Formerly MS 21250) |
Bolt, Tension, Steel, External Wrenching, Flanged, 12-Point, 180 KSI FTU, 450 F. |
| NASM 24693 (Formerly MS 24693) |
Screw, Machine, Flat Countersunk Head, 100, Cross Recessed, UNC-2A and UNF-2A. |
| MS 25081 |
Washer, Key |
| MS 25082 |
Nut, Plain, Hexagon, Electrical - Thin |
| AS 25281 (Formerly MS 25281) |
Clamp, Loop, Plastic, Wire Support |
| NASM 27039 (Formerly MS 27039) |
crew, Machine, Pan Head, Cruciform Recess |
| MS 27183 |
Washer, Flat (Round, Steel, Cadmium Plated) General Purpose |
| AS 28775 (Formerly MS 28775) |
Packing, Preformed, MS28775 O-Ring |
| MS 51830 |
Insert, Screw-thread, Locked In, Key Locked, Miniature and Lightweight |
| MS 51831 |
Insert, Screw-thread, Locked In, Key Locked, Heavy Duty |
| NASM 51834 (Formerly MS 51834) |
Stud, Locked In, Key-Locked, Heavy Duty |
| NASM 51861 (Formerly MS 51861) |
Screw, Tapping-thread Forming, Type AB, Pan Head, Cross-recessed |
| MS 51957 |
Screw, Machine, Pan Head, Cross-recessed, Corrosion Resistant Steel, UNC-2A |
| NASM 51958 (Formerly MS 51958) |
Screw, Machine Pan-head, Cross-recessed, Corrosion Resisting Steel, UNF-2A |
| NASM 51959 (Formerly MS 51959) |
Screw, Machine Pan-Head, 82, Cross-Recessed, Corrosion-Resisting Steel, Unc-2A |
| ASME B18.2.1 (Formerly MS 90728) |
Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) |