Document Center is acquired by Nimonik

FSC 5120: Hand Tools, Nonedged, Nonpowered

The following documents are a part of this series:

• A-A-1274 - Wrench, Torque, Deflecting Beam
• A-A-1284 - Hammer, Hand, Maul, Spike (Railroad)
• A-A-1285 - Hammer, Hand, Maul, Ship (Top)
• A-A-1286 - Hammer, Hand, Stoneworkers', Masons'
• A-A-1288 - Hammer, Hand, Stoneworkers', Napping
• A-A-1289 - Hammer, Hand, Stoneworkers' Striking (Drilling)
• A-A-1290 - Hammer, Hand, Stoneworkers', Hand Drilling, Short Pattern
• A-A-1291 - Hammer, Hand, Blacksmiths' or Engineers' Straight Peen
• A-A-1292 - Hammer, Hand, Blacksmiths' or Engineers' Cross Peen
• A-A-1293 - Hammer, Hand, Blacksmiths' or Engineers' Double Face
• A-A-1294 - Hammer, Hand, Tinners', Setting (Paneing)
• A-A-1295 - Hammer, Hand, Tinners', Riveting
• A-A-1297 - Hammer, Hand, Trimmers', Tack, Magnetized
• A-A-1300 - Hammer, Hand, Scaling
• A-A-1304 - Hammer, Hand, Machinists, Riveting
• A-A-1305 - Hammer, Hand, Machinists', Ball Peen
• A-A-1306 - Hammer, Hand, Carpenters', Ripping Straight Claw
• A-A-1307 - Hammer, Hand, Carpenters', Nail, Curved Claw
• A-A-1340 - Wrench, Box, Stub End Type, Offset Handle
• A-A-1341 - Wrench, Box, Stub End Type, Straight Handle
• A-A-1342 - Wrench, Box, Double Head 15 Deg. Offset Each End, Regular Length
• A-A-1343 - Wrench, Box, Double Head 15 Deg. Offset Each End, Short Length
• A-A-1344 - Wrench, Box, Double Head Offset Each End (Deep or Modified), Regular Length
• A-A-1345 - Wrench, Box, Double Head Offset Each End (Deep or Modified), Short Length
• A-A-1346 - Wrench, Box, Double Head, 12 Point, Half-Moon
• A-A-1348 - Wrench, Tappet, Double Spearhead, Open End, 15 Deg. Head
• A-A-1349 - Wrench, Slugging, Box, 12 Point
• A-A-1350 - Wrench, Flare Nut, Single Head, Modified 12-Point
• A-A-1351 - Wrench, Open End, Thin Double Head
• A-A-1352 - Wrench, Open end, Single Thin Head, Straight
• A-A-1353 - Wrench, Open End, Single Thin Head, 30 Degrees Head
• A-A-1354 - Wrench, Open End, Single Thin Head, 15 Degrees Head
• A-A-1355 - Wrench, Ignition, Double Head, Open End, 15 Deg. and 60 Deg. Heads
• A-A-1356 - Wrench, Engineer's, Double Head, Open End, 15 Degree Head
• A-A-1357 - Wrench, Engineer's, Single Head, Open End, 15 Degree
• A-A-1358 - Wrench, Combination, Open End and 15 Deg. Offset Box Opening
• A-A-1359 - Wrench, Angle, Double Head, Open End, 15 Deg and 60 Deg. Heads
• A-A-1360 - Wrench, Striking, Box 12 Point
• A-A-1392 - Socket, Socket Wrench, Nonpower, 1 Inch Drive, 12-Point
• A-A-1393 - Socket, Socket Wrench, Nonpower, 1 Inch Drive, 12-Point
• A-A-1394 - Socket, Socket Wrench, Nonpower, 3/4 Inch Drive, 12-Point, Regular Length
• A-A-1395 - Socket, Socket Wrench, Nonpower, 3/4 Inch Drive, 12 Point, Long Length
• A-A-1396 - Socket, Socket Wrench, Nonpower, 1/2 Inch Drive, Universal Joint
• A-A-1397 - Socket, Socket Wrench, Nonpower, 1/2 Inch Drive, 8-Point
• A-A-1398 - Socket, Socket Wrench,Nonpower, 1/2 Inch Dr Ive, 12-Point, Long Length
• A-A-1399 - Socket, Socket Wrench, Nonpower, 1/2 Inch Drive, 12-Point, Regula R Length
• A-A-1401 - Socket, Socket Wrench, Nonpower, 3/8 Inch Drive, Universal Joint
• A-A-1402 - Socket, Socket Wrench, Nonpower, 3/8 Inch Drive, 8-Point
• A-A-1403 - Socket, Socket Wrench, Nonpower, 3/8 Inch Drive, Universal Joint
• A-A-1404 - Socket, Socket Wrench, Nonpower, 3/8 Inch Drive, 12 Point, Regular Length
• A-A-1405 - Socket, Socket Wrench, Nonpower, 1/4 Inch Drive, 4 and 8 Point
• A-A-1406 - Socket, Socket Wrench, Nonpower, 1/4 Inch Drive, 12 Point, Long Length
• A-A-1407 - Socket, Socket Wrench, Nonpower, 1/4 Inch Drive, 12 Point, Regular Length
• A-A-1408 - Socket, Socket Wrench, Nonpower, 1/4 Inch Drive, 6-Point, Long Length
• A-A-1409 - Socket, Socket Wrench, Nonpower, 1/4 Inch Drive, 6-Point, Regular Length
• A-A-2164 - Handle, Hinged
• A-A-2165 - Handle, Ratchet, Reversible
• A-A-2166 - Handle, Speeder, Brace Type
• A-A-2167 - Handle, Spin Type
• A-A-2168 - Handle, Tee, Sliding
• A-A-2169 - Universal Joint, Socket Wrench
• A-A-2170 - Extension, Socket Wrench, Solid
• A-A-2171 - Extension, Socket Wrench, Flexible
• A-A-2172 - Adapter, Socket Wrench
• A-A-2173 - Adapter, Ratchet, Socket Wrench
• A-A-22344 - Wrenches, Adjustable
• A-A-2344 - Wrenches, Adjustable
• A-A-2345 - Wrench, Open End, Adjustable
• A-A-2346 - Wrench, Auto, Adjustable
• A-A-2347 - Wrench, Monkey
• A-A-2382 - Wrench, Socket, Conventional Size
• A-A-2383 - Wrench, Socket, Pocket
• A-A-2384 - Wrench, Socket, Miniature
• A-A-2385 - Wrench, Socket, Stubby
• A-A-2411 - Wrench, Torque, Indicating, Rigid Housing
• A-A-2413 - Wrench, Torque, Limiting, 'T' Handle
• A-A-2414 - Wrench, Torque, Limiting, Screwdriver Grip, Graduated, Withdrawn, Superseded by ASME-B107.14m
• A-A-2473 - Key, Socket Head Screw
• A-A-2474 - Bar, Wrecking (Nonsparking & Nonmagnetic)
• A-A-2476 - Hammer Hand (Nonsparking & Nonmagnetic)
• A-A-2477 - Key, Socket Head Screw (Nonsparking & Nonmagnetic)
• A-A-2478 - Marlinespike (Nonsparking & Nonmagnetic)
• A-A-2479 - Pliers, (Nonsparking & Nonmagnetic)
• A-A-2483 - Screwdriver, Cross Tip (Phillips, Nonsparking & Nonmagnetic)
• A-A-2484 - Screwdriver, Flat Tip (Nonsparking & Nonmagnetic)
• A-A-2485 - Screwdriver, Offset (Nonsparking & Nonmagnetic)
• A-A-2486 - Socket, Socket Wrench (Nonsparking & Nonmagnetic)
• A-A-2487 - Trowel (Bricklayer's, Nonsparking & Nonmagnetic)
• A-A-2488 - Wedge, Joint Breaking (Nonsparking & Nonmagnetic)
• A-A-2489 - Wrenches, Adjustable (Nonsparking & Nonmagnetic)
• A-A-2490 - Wrench, Box (Nonsparking & Nonmagnetic)
• A-A-2491 - Wrench, Box & Open End, Combination (Nonsparking & Nonmagnetic)
• A-A-2492 - Wrench, Bung (Nonsparking & Nonmagnetic)
• A-A-2494 - Wrench, Pipe (Nonsparking & Nonmagnetic)
• A-A-2495 - Wrench, Socket (Nonsparking & Nonmagnetic)
• A-A-2496 - Wrench, Spanner (Nonsparking & Nonmagnetic)
• A-A-2497 - Wrench Set, Socket (Nonsparking & Nonmagnetic)
• A-A-2505 - Pliers, Slip Joint (Nonsparking & Nonmagnetic)
• A-A-2528 - Ladle, Melting, Hand
• A-A-2529 - Iron; Calking Wood
• A-A-2531 - Marlinespike (Manila Rope)
• A-A-2538 - Adjusting Tool, Valve Tappet
• A-A-2539 - Hammer, Hand, Bricklayers'
• A-A-2540 - Nail Set
• A-A-2545 - Drifts; Drill
• A-A-2550 - Puller, Nail, Hand
• A-A-2554 - Opener, Crate
• A-A-2563 - Crowbar
• A-A-2564 - Bar, Pinch (Offset)
• A-A-2565 - Bar, Pry (Rolling - Head)
• A-A-2566 - Bar, Wrecking
• A-A-2567 - Bar, Digging & Tamping
• A-A-2568 - Bar, Digging
• A-A-2578 - Pot, Melting, (Nonelectric, Solder Style)
• A-A-2586 - Holder & Guide, Drive Pin
• A-A-2591 - Clamping Tool, Strap Band, Hose
• A-A-2635 - Socket, Socket Wrench
• A-A-2699 - Tracker, Staple, (Compression Type, Manually-Operated)
• A-A-2711 - Screwdriver, Cross Tip (High Performance)
• A-A-2712 - Screwdriver, Flat Tip (High Performance)
• A-A-283 - Extractor; Screw & Pipe, Tapered, Spiral Flutes or Ridges, Drill Style
• A-A-284 - Riveter, Yoke, Hand (Rivet Squeezer, Hand)
• A-A-2879 - Bar, Pinch (Straight)
• A-A-2881 - Bar, Combination Pry & Scraper
• A-A-2920 - Rake (Asphalt, Road)
• A-A-2925 - Key, Spline Socket Head Screw & Key Sets Socket Head
• A-A-2926 - Screwdriver Handle & Hexagon Bit, Replaceable, Adjustable Bit
• A-A-2927 - Screwdriver Handle & Bit, Nonreplaceable, Nonadjustable Bit
• A-A-2932 - Key, Hexagon Socket Head Screw & Key Sets Socket Head
• A-A-2934 - Ice Scraper & Chipper, Sidewalk
• A-A-2938 - Caps, Vise Jaw
• A-A-2968 - Saw Set, Hand
• A-A-2970 - Jack, Screw
• A-A-2971 - Pliers, Slip Joint (Line Clamp)
• A-A-2972 - Extractor, Electron Tube (Tong Type)
• A-A-2973 - Pullers, Fuse
• A-A-2975 - Digger, Posthole, Hinged
• A-A-2977 - Hoe, Mortar Mixing
• A-A-2978 - Removal Tool, Oil Filter
• A-A-2979 - Jack, Rack Bar
• A-A-2980 - Vise, Pipe, Chain-Style
• A-A-3016 - Hawk, Plasterer's
• A-A-3017 - Block, Dolly, Sheet Metal
• A-A-3020 - Handles, File, Wood
• A-A-3021 - Extractor, Screw (Stud & Pipe)
• A-A-3022 - Extractor, Tap
• A-A-3023 - Extractor, Screw & Drill Guide, Screw Extractor
• A-A-3026 - Scriber, Machinists'
• A-A-3031 - Hook, Cant
• A-A-3032 - Peavy
• A-A-3033 - Igniter, Friction, Oxyacetylene-Torch
• A-A-3034 - Roller, Hand (Rubber Roller)
• A-A-3035 - Wedge, Metal, Joint & Breaking
• A-A-3036 - Vise Woodworker's (Quick Acting)
• A-A-3037 - Lifter, Valve Spring
• A-A-3038 - Compressor, Piston Ring, Band Type
• A-A-3039 - Handling Tool, Sheet Material (Vacuum Type)
• A-A-3040 - Puller, Nail, Hand
• A-A-3041 - Wrench, Open End, Ratchet (Tac Pattern), for Tube Fittings,Electrical Cable Terminals
• A-A-3042 - Socket, Open Detachable, Standard Wall, Octagon
• A-A-3043 - Riveter, Blind, Hand & Heads
• A-A-3045 - Hammer, Geologists' (Prospecting Pick)
• A-A-3046 - Jointer, Brick
• A-A-3048 - Tapes, Measuring (Steel Surveyors)
• A-A-3050 - Vise, Pipe, Hinged Jaw
• A-A-307 - Pick, Drifting (Without Handle)
• A-A-308 - Pick, Contractors, Point and Chisel Ends (Without Handle)
• A-A-3086 - Wrench, Bung, & Wrench, Drain Plug
• A-A-3087 - Forceps, Sheet Holder
• A-A-3099 - Hammer, Carpenters', Straight Claw
• A-A-312 - Jack Kit, Hydraulic, Hand (20 Ton)
• A-A-313 - Jack Kit, Hydraulic, Hand (10 Ton)
• A-A-314 - Jack Kit, Hydraulic, Hand (4 Ton)
• A-A-315 - Mattock, Pick (Without Handle)
• A-A-3152 - Screwdriver, Jewelers', Swivel Knob
• A-A-3153 - Bit, Screwdriver, Male Shank, Hexagon Tip
• A-A-316 - Wedge, Steel (Felling)
• A-A-335 - Wedge; Steel (Saw)
• A-A-336 - Wedge, Steel (Splitting)
• A-A-337 - Pick, Tamping (Without Handle)
• A-A-338 - Pick, Clay, Point and Chisel Ends (Without Handle)
• A-A-346 - Mattock, Cutter (without Handle)
• A-A-380 - Jack, Bumper (Hydraulic)
• A-A-381 - Jack, Hydraulic, Hand (Self-Contained)
• A-A-382 - Jack, Hydraulic, Hand (Remote Control)
• A-A-385 - Extractor, Cotter Pin
• A-A-429 - Clamp, C- Light Service
• A-A-430 - Clamp, C-, Very Light Service
• A-A-431 - Clamp, C (Medium Service)
• A-A-432 - Clamp, Screw, Quick Adjusting, Fixed Head
• A-A-433 - Clamp, C-, Heavy Duty
• A-A-434 - Clamp, Screw, Quick Adjusting, Sliding Head
• A-A-435 - Clamp, Screw, Quick Adjusting, Threaded Head
• A-A-50096 - Hammer, Rock
• A-A-50460 - Carrier, Storage Battery, Hand
• A-A-50765 - Forceps; Sheet Holder
• A-A-51253 - Screwdriver, Jeweler's, Swivel Knob
• A-A-52114 - Mattax, With Carrier
• A-A-52123 - Bars, Bucking, Rivet
• A-A-52209 - Scriber, Diamond Point
• A-A-53193 - Hammer, Hand (Optical)
• A-A-534 - Wrench Set, Socket, Hand
• A-A-537 - Puller Set, Post
• A-A-539 - Installing Tool Set, O-Ring
• A-A-547 - Clamp, Hand Screw
• A-A-548 - Clamp, Cantilever Jaw
• A-A-59158 - Tools for Inserting & Extracting Helical Coil Wire Screw Thread Inserts
• A-A-59193 - Brushes, Wire, Boiler Tube, Expanding Type for Use With Electric and Air Motor Driven Boiler Tube Cleaning Outfits
• A-A-59219 - Augers, Posthole, Hand
• A-A-59220 - Wrenches, Open End, & Wrench Assembly, Stamped Steel
• A-A-59221 - Lappers, Poppet Valve, Hand Powered
• A-A-59337 - Intrenching Tool, Hand, Folding, Lightweight
• A-A-635 - Rubbish Picker
• AN-3427 - Crimping Tool, Electric Cable Terminal, Hand AF Notice 1, Dated 19 May 60, (Cancelled)
• AN-3428 - Crimping Tool, Electric Cable Terminal.Hand, 22-10 Capacity (Use Ms 17776)
• AN-8506 - Wrench - Thin Crow Foot (Use GGG-W-641D)
• AN-8507 - Bar - Telescopic (1 Od, 43-3/4 Extended Length)
• AN-8508 - Wrench, Crowfoot Flare Nut
• AN-8509 - Socket - 12 Point 1/2 Inch Square Drive 7/8 Inch Broached (Use GGG-W-641)
• AN-8510 - Knockout - Threaded Taper Pin
• AN-8511 - Adapter - Telescoping Bar (7/8 To 1 Inch Od)
• AN-8512 - Wrench - Spark Plug Elbow Square Drive (3/4 Inch Opening)
• AN-8513 - Wrench-Spark Plug, Elbow Square Drive (Use Fed Spec GGG-C-1507)
• AN-8514 - Wrench - 3/8 Inch Square Drive Adjustable Spanner (.75 To 2 Inches Diameter)
• AN-8515 - Wrench - 1/2 Inch Square Drive Adjustable Spanner (1.75 To 4Inches Diameter)
• AN-8516 - Wrench - 1/2 Inch, Square Drive Adjustable (Cancelled, 1995, No Superseding Document)
• AS-22520 - Crimping Tools, Wire Termination, General Specification for
• AS-22520/1 - Crimping Tools, Type I, Terminal, Hand, Wire Termination for Wire Barrel Sizes 12 Through 22 and Coaxial Inner Contacts
• AS-22520/10 - Crimping Tools, Type 2, Terminal, Hand, Wire Termination, for Coaxial, Twinaxial, Triaxial, Shielded Contacts and Ferrules, Terminal Lugs, Splices, and End Caps
• AS-22520/17 - Crimping Tools, Terminal, Hand, Wire Termination for Crimp Type Removable Contacts, Electric Connectors
• AS-22520/38 - Crimping Tool, Terminal, Hand Actuated, Wire Termination, Type II, for External Power Plug Socket Contacts and Lug Terminal Sizes 22-10
• AS-22520/40 - Crimping Tools, Terminal, Hand, Wire Termination; Type II, T-Head for Terminal Lugs and Splices Size 22-14
• AS-22520/41 - Crimping Tools, Terminal, Hand, Wire Termination; Type II for Terminals and Splices Size 10-12
• AS-25442 - Dies, for MS25441, Hydraulic Crimping, Tool (For Use With Aluminum Wire Terminals) (STABILIZED Aug 2014)
• AS-34801 - Tool, Connector Assembly; for MIL-C-5015 Connectors
• AS-4167 - Wrenches; Flare Nut, Crowfoot, 12 Point Non-Distorting
• AS-5259 - Crimping Tool and Accessories, Electrical, Size 8 to 700 KCMIL, General Purpose Use, Die and Dieless
• AS-5259/1 - Crimping Tool and Accessories, Remote Crimp Head, Hydraulic, Wire Size 8 to 0000 for Insulated and Un-Insulated Crimp Barrels
• AS-5259/2 - Crimping Tool and Accessories, Hydraulic Pumps, 10 000 psi Minimum
• AS-5259/3 - Crimping Tool and Accessories, Hand Operated, Die Type, Wire Sizes 8 to 00 Un-Insulated and Insulated Crimp Barrels
• AS-5259/4 - Crimping Tool and Accessories, Remote Crimp Head, Hydraulic, Wire Size 8 To 00 Un-Insulated and 8 Thru 2 Insulated Crimp Barrels
• AS-5259/5 - Crimping Tool and Accessories, Hand Operated, Lightweight, Die Type, Wire Size 8 To 00 Un-Insulated and 8 Thru 2 Insulated Crimp Barrels
• AS-5259/6 - Crimping Tool and Accessories, Inspection Gages, for AS5259 Dies
• AS-5259/7 - Crimping Tool and Accessories, Dies, Wire Size 8 To 0000 Un-Insulated and Insulated Crimp Barrels
• AS-5768 - Tool, Stripper, Electrical Insulation, General Specification
• AS-5768/1 - Tool, Stripper, Manually Actuated, Electrical Insulation, Round Wire, Size 10 To 30
• AS-5768/2 - Tool, Stripper, Manually Actuated, Small Grip, Electrical Insulation, Round Wire, Size
• AS-81306 - Wiring Installation Tools for Bands and Tiedown Straps
• AS-81306/1 - Band Installation Tool, Hand, one-Step, for as85049/128 Connector Accessory Cable Shield Terminating Bands
• AS-81306/2 - Band Installation Tool, Hand, Two Step Terminal, for AS85049/128 Connector Accessory Cable Shield Termination Bands
• AS-81969 - Installing and Removal Tools, Connector Electrical Contact, General Specification For
• AS-81969/1 - INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION C
• AS-81969/10 - Installing and Removal Tools, Connector, Electrical Contact, Type I and Ii, Class 2, Composition B
• AS-81969/11 - Removal Tools, Connector, Electrical Contact, (Fork Type, Wrappost/Crimp Removable) Type Ii, Class 1, Composition C
• AS-81969/12 - Installing and Removal Tools, Connector, Electrical Contact, Type Iii, Class 2, Composition A
• AS-81969/13 - Installing Tools, Connector, Electrical Contact, (Type Cr) Type I, Class 1, Composition A
• AS-81969/14 - Installing and Removal Tools, Connector Electrical Contact, Type Iii, Class 2, Composition B
• AS-81969/15 - Removal Tools, Connector, Electrical Contact, Type Ii, Class 2, Composition A
• AS-81969/16 - Installing and Removal Tools, Connector, Electrical Contact, Type Iii, Class 1, Composition B
• AS-81969/17 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C
• AS-81969/18 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C
• AS-81969/19 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 1, Composition C
• AS-81969/2 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C
• AS-81969/20 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 1, Composition A
• AS-81969/21 - Installing and Removal Tools, Connector, Electrical Contacts, Interfacial Seal, Type Iii, Class 1, Composition A
• AS-81969/22 - Removal Tools, Connector, Electrical Contact, (Crimp Removable), Type Ii, Class 1, Composition A
• AS-81969/25 - Installing and Removal Tools, Connector, Electrical Contact, Type Iii, Class 2, Composition C
• AS-81969/27 - Removal Tools, Connector, Electrical Contact, Type Ii, Class 1, Composition A
• AS-81969/28 - Removal Tools, Connector Electrical Contact, Type Ii, Class 2, Composition C, Removal Tool Only
• AS-81969/29 - Removal Tools, Connector, Electrical Contact, Type Ii, Class 1, Composition B
• AS-81969/3 - INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION C
• AS-81969/30 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 2, Composition C, for Unwired Contacts
• AS-81969/33 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition A
• AS-81969/34 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 1, Composition a (for MIL-DTL-28840 Connectors)
• AS-81969/39 - Installing and Removal Tools, Connector Electrical Contact, Type Iii, Class 2, Composition B
• AS-81969/4 - REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, WRAP POST/CRIMP REMOVABLE) TYPE II, CLASS 1, COMPOSITION C
• AS-81969/43 - Removal Tools, Socket Head, Electronic Components, Type Ii, Class 1, Composition C
• AS-81969/5 - INSTALLING TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, CRIMP REMOVABLE) TYPE I, CLASS 1, COMPOSITION A
• AS-81969/6 - Removal Tools, Connector, Electrical Contact, (Type Cr Connector) Type Ii, Class 1, Composition A
• AS-81969/8 - Installing and Removal Tools, Connector Electrical Contact, Type I & Ii, Class 2, Composition A
• AS-81969/9 - Removal Tool, Connector, Electrical Contact, Type Ii, Class 1, Composition A
• AS-85643/2 - BIT, SCREWDRIVER, PHILLIPS, RIBBED, CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK, POWER DRIVEN (STABILIZED Sep 2013)
• AS-870 - Wrenching Configuration, Bi-Hexagonal (12 Point) Drive, Design Standard For (STABILIZED Feb 2015)
• AS-90387 - Wiring Installation Tools for Plastic and Metal Tiedown Straps
• AS-954 - Wrenches, Hand, Twelve Point, High Strength, Thin Wall
• ASME-B107.19 - Pliers: Retaining Ring
• ASME-B107.20M - Pliers: Lineman's, Iron Worker's, Gas, Glass, Fence, and Battery
• ASME-B107.21 - Wrench, Crowfoot
• CSA-ISO/IEC-8825 - Specification of Basic Encoding Rules for Abstract Syntax Notation One (Asn.1)
• FED-STD-346 - Gages, Wrench Opening
• GG-C-555 - Compressor, Piston Ring, Band-Type +Cancelled, No S/S Document+
• GGG-A-145 - Adjusting Tool, Brake Shoe (Spoon Type)
• GGG-A-147 - Adjusting Tool, Valve Tappet +Cancelled, 1989, Superseded By A-A-2538
• GGG-A-450 - Alignment Tool, Electric Equipment
• GGG-A-576 - Anvil, Blacksmiths+Canceled, No S/S Document+
• GGG-A-821 - Auger, Pipe & Sewer, Hand; & Auger, Water-Closet, Hand
• GGG-A-891 - Awls+Canceled, No S/S Document+
• GGG-B-101 - Bar, Chisel, Pinch, Pry, Wrecking, Digging, Tamping, Digging and Tamping, and Crowbars (Superseded by A-A-2562, A-A-2563, A-A-2564, A-A-2565, A-A-2566, A-A-2567, A-A-2568 and A-A-2879)
• GGG-B-110 - Bar, Combination Pry and Scraper+Canceled,Superseded By A-A-2881+
• GGG-B-1222 - Bit, Screwdriver (and Adapter, Screwdriver Bit)(Canceled,Nos/S Document)
• GGG-B-175 - Bender, Electrical Conduit, Hand (Portable)
• GGG-B-191 - Bender, Tube, Hand, (Portable)+Canceled, No S/S Document+
• GGG-B-376 - Bit, Screwdriver, (Tapered Square Shank, Flat Tip & Cross Tip)
• GGG-B-400 - Block, Bench, Mechanic S +Cancelled, 9/5/78, No S/S Document+
• GGG-B-471 - Blade, Coping Saw, & Blade, Jewelers' Saw
• GGG-B-481 - Block, Dolly, Sheet Metal
• GGG-B-550 - Blowtorch, Alcohol and Gasoline, Hand +Cancelled, 1976, No S/S Document+
• GGG-B-785 - Burnishers, Contact, Hand (and Blades)
• GGG-C-120 - Calking Gun, Bulk & Cartridge Compounds
• GGG-C-135 - Calking Tool, Hand+Canceled, No S/S Document+
• GGG-C-137 - Caps, Vise Jaw
• GGG-C-1507 - Crowfoot Attachment, Socket Wrench
• GGG-C-1968 - Carriers, Storage Battery, Hand +Cancelled, 1994, No S/S Document+
• GGG-C-400 - Clamp, Brake Lining +Cancelled, 1977, No S/S Document+
• GGG-C-406 - Clamp & Hand Screws
• GGG-C-413 - Clamping Tool, Strap Band, Hose
• GGG-C-414 - Clamp, Wire Splicing +Cancelled, 1987, No S/S Document+
• GGG-C-415 - Claw, Tack (Cancelled, 1987, No Superseding Document)
• GGG-C-555 - Compressor, Piston Ring, Band-Type+Canceled, Superseded By A-A-3038
• GGG-C-640 - Crimping Tool, Terminal, Hand(Ignition Cable) +Cancelled, 1078, No S/S Document+
• GGG-C-695 - Groover, Sheet Metal, Hand
• GGG-D-326 - Digger, Posthole, Hinged
• GGG-D-631 - Dresser, Abrasive Wheel, Hand, Revolving Cutter Type
• GGG-D-635 - Dresser, Abrasive Wheel (Stick-Type) +Cancelled, 1978, No S/S Document+
• GGG-D-641 - Drifts; Drill
• GGG-D-643 - Driftpin (Double Taper)
• GGG-D-786 - Drivers, Threaded Studs, & Headed Pins
• GGG-E-926 - Extractor, Cotter-Pin
• GGG-E-930 - Extractor, Electron Tube (Tong Type)(Canceled, Superseded by A-A-2972+
• GGG-E-936 - Extractor, Screw (Stud & Pipe), & Extractor, Tap
• GGG-E-950 - Extractor, Stuffing Box & Pump Packing (& Tamper); & Extractor, Lantern Gland
• GGG-F-360 - Finger, Mechanical, & Retriever Tool, Magnetic
• GGG-F-400 - Fire Pot, Liquid Fuel +Cancelled, 1977, No S/S Document+
• GGG-F-420 - Fishing Tool, Pneumatic Tire Valve
• GGG-F-440 - Float, Mortar +Cancelled, 1978, No S/S Document+
• GGG-F-451 - Flaring Tool, Tube Hand
• GGG-F-570 - Forceps, Sheet Holder+Canceled, Superseded By A-A-3087+
• GGG-F-590 - Force Cup, Plumber S (Pressure & Suction, Plunger Type) +Cancelled, 1964, No S/S Docum
• GGG-F-626 - Fork, Stone, Hand, D-Handle
• GGG-G-690 - Groovers, Edgers, & Corner Tools - Concrete, Hand
• GGG-G-695 - Groover, Sheet Metal, Hand
• GGG-H-110 - Handling Tool, Sheet Material (Vacuum Type)(Canceled,Superseded ByA-A-3039+
• GGG-H-1347 - Hot Line Sticks
• GGG-H-135 - Hawk, Plasterer's
• GGG-H-20 - Hammer, Hand, (Body & Fender, Forged Steel Head)
• GGG-H-33 - Hammers, Hand & Mallets, Surface Protective; Holders & Adapters, Inserted Hammer Face,
• GGG-H-35 - Hammer, Hand; Welders, Chipping
• GGG-H-506 - Hoe, Mattocks & Picks+Canceled, No S/S Document+
• GGG-H-570 - Holder & Guide, Drive Pin
• GGG-H-575 - Holder, Sheet Metal, Hole & Edge Grip
• GGG-H-580 - Hook, Material Handling, Hand +Cancelled, 1986, No S/S Document+
• GGG-H-585 - Hook, Manhole Cover +Cancelled, 1978, No S/S Document+
• GGG-H-601 - Hooks, Bush (Brush) +Superseded by GGG-B-800+
• GGG-H-608 - Hooks, Grass (Sickles)+Canceled, No S/S Document+
• GGG-H-86 - Hammer, Hand, (Forged Steel Head)+Canceled, Superseded By A-A-3045& A-A-3099+
• GGG-I-671 - Irons: Calking, Wood
• GGG-J-51 - Jack, Mechanical, Hand Operated (Screw, Scissors, Reel, Planer, & Rack Bar)+See Commen
• GGG-J-60 - Jack Kit, Hydraulic, Hand (With Truck or Chest)
• GGG-J-63 - Jack, Hydraulic, Hand, Jack, Bumper (Hydraulic)
• GGG-J-65 - Jointer, Brick
• GGG-K-266 - Key, Cowl Fastener
• GGG-K-275 - Key, Socket Head Screw & Key Sets Socket Head (Wrench, Hexagon, Spline & Square)
• GGG-K-481 - Knives, Craftsman's (Hawkbill, Shoe, Chiping) Putty & Scraping
• GGG-L-1345 - Lead Joint Runner (Cancelled, 1994, No Superseding Document)
• GGG-L-350 - Lifter, Valve Spring, Compressor, Valve Spring+Canceled,S/Sby A-A-3037+
• GGG-L-36 - Ladles, Deck-Paying
• GGG-L-51 - Ladle, Melting, Hand
• GGG-M-100 - Marlinespike (Manila Rope) (Cancelled, 1989, Superseded by A-A-2531)
• GGG-M-350 - Mirror, Inspection
• GGG-M-40 - Mallets, Tamping-Poles, & Wedges, Wood +Cancelled, 1994, Nos/S Document+
• GGG-M-500 - Molding Set, Cable End Plate +Cancelled, 1978, No S/S Document+
• GGG-N-185 - Needle, Cable Lancing
• GGG-N-71 - Nail Set +Cancelled, 1994, No S/S Document+
• GGG-O-599 - Opener, Crate
• GGG-P-1179 - Puller Kit, Mechanical (Blower Service) +Cancelled, 1974, Nos/S Document+
• GGG-P-151 - Peavy; Hook, Cant; and Carrier, Timber (Canceled, Superseded by A-A-3031 and A-A-3032)
• GGG-P-335 - Pike Pole(Canceled, No Superseding Document)
• GGG-P-340 - Pin Straightener, Electron Tube
• GGG-P-471 - Pliers+Canceled, No S/S Document+
• GGG-P-474 - Pliers, Hog Ring Staple (Upholsterers); Brake Repair (Brakespring), and Hose (Wire)+C
• GGG-P-475 - Pliers, Jewelers
• GGG-P-477 - Plier, Slip Joint (Line Clamp)(Canceled, No Superseding Document)
• GGG-P-480 - Pliers, Retaining Ring
• GGG-P-596 - Pots, Fire, Gasoline and Kerosene +Cancelled, S/Sby GGG-F-400
• GGG-P-611 - Pot, Melting, Electric, Portable+Canceled,No S/S Document+
• GGG-P-643 - Puller Kit, Mechanical
• GGG-P-655 - Pricker, Sailmakers +Cancelled, 1994, No S/S Document+
• GGG-P-770 - Puller, Fuse +Cancelled, 1994, No S/S Document+
• GGG-P-781 - Puller Attachment, Mechanical, & Puller Set, Mechanical
• GGG-P-785 - Puller, Mechanical, (Post, Manually-Operated) +Cancelled, 1964, No S/S Document+
• GGG-P-788 - Puller, Mechanical, Watch and Clock Hand
• GGG-P-791 - Puller, Nail, Hand+Canceled,Superseded By A-A-3040+
• GGG-P-831 - Punches; Center, Drive Pin, Aligning, & Prick
• GGG-R-190 - Replacer, Valve Key +Cancelled, 1978, No S/S Document+
• GGG-R-200 - Removal Tool, Oil Filter+Canceled,Superseded By A-A-2978+
• GGG-R-395 - Riveter, Blind, Hand and Heads+Canceled,Superseded By A-A-3043+
• GGG-R-400 - Rivet Set, Hand
• GGG-R-620 - Roller, Hand (Rubber Roller)+Canceled,Superseded By A-A-3034+
• GGG-R-80 - Rake (Asphalt, Road)
• GGG-S-111 - Scoops; Shovels; Spades, & Spoons
• GGG-S-121 - Screwdriver & Screw Starter, Hand+Canceled, No S/S Document+
• GGG-S-122 - Screwdriver, Clutch Tip
• GGG-S-125 - Screwdriver, Flat Tip, (Typewriter Repair) +Cancelled, 1976,No S/S Document+
• GGG-S-131 - Scriber, Machinists'+Canceled, Superseded By A-A-3026+
• GGG-S-1408 - Screwdriver, Ratchet, Right Angle Offset, Right & Left Handturning+Canceled,No S/S Do
• GGG-S-1808 - Screwdriver, Jeweler's
• GGG-S-190 - Seamer Sheet Metal, Hand
• GGG-S-326 - Shovels, Scoops, Spades, Snow Pushers, & Telegraph Spoons
• GGG-S-625 - Spoon, Body and Fender(Canceled,No Superseding Document)
• GGG-S-65 - Saws, Hand
• GGG-S-731 - Stakes, Sheet Metalworking, and Plate, Bench Stakeholder (Canceled,No Superseding Document)
• GGG-S-735/7 - Stamping and Marking Equipment, Press, Lead Seal, Hand, Reversible Type
• GGG-S-735/8 - Stamping & Marking Equipment, Press, Lead Seal, Hand, Nonreversible Type
• GGG-S-740 - Stands, Pipe Vise; & Vises & Stands, Pipe
• GGG-S-751 - Stick, Packing +Cancelled, 1978, No S/S Document+
• GGG-S-775 - Stud Remover and Setter
• GGG-T-1310 - Tape, Fish, Steel(Canceled, No Superseding Document)
• GGG-T-20 - Tacker, Staple, (Compression Type, Manually Operated) +Cance
• GGG-T-30 - Tacker, Staple (Compression Type, Manually Operated for Round Crowned Staples) and Stapl
• GGG-T-350 - Tire Lock Ring Tool, Tire Removing Tool, & Tire Iron
• GGG-T-40 - Tampers, Hand
• GGG-T-546 - Tongs, Blacksmiths'
• GGG-T-671 - Trowels
• GGG-T-870 - Tweezers, Craftsman's+Canceled, No S/S Document+
• GGG-V-410 - Vise, Bench, Clamp Base, Sheet Metal-Workers; Bench & Pipe,Jewelers+Canceld, No S/S D
• GGG-V-412 - Vise: Hand; Pin; Wire Rope Splicing; & Square End Sawing, Tube+Canceled,No S/S Documen
• GGG-V-415 - Vise, Pipe+Canceled, Superseded By A-A-2980 and A-A-3050+
• GGG-V-440 - Vise, Handsaw, Filing, Band Saw Filing, & Circular Saw Filing
• GGG-V-445 - Vise, Woodworker's & Patternmaker's
• GGG-W-1405 - Wrench, Box (Ratcheting)
• GGG-W-1437 - Wrench, Socket & Box End
• GGG-W-171 - Wedges, Metal (Magnesium) +Cancelled, 1987, No S/S Document+
• GGG-W-181 - Wedges, Tool Handle
• GGG-W-201 - Wedge, Metal, Jointing & Breaking
• GGG-W-220 - Wedge, Steel
• GGG-W-2843 - Wrench, Micrometer, Torque
• GGG-W-340 - Wire Twister Plier (With Side Cutter)
• GGG-W-631 - Wrench, Adjustable, Open-End, Auto and Monkey+Canceled,S/Sby A-A-2344&2345&2346&2347
• GGG-W-636 - Wrench, (Box, Open End, and Combination)
• GGG-W-641 - Wrench, Socket; (& Sockets, Handles, & Attachments for Socket Wrenches, Hand)
• GGG-W-642 - Wrench, Bung, (Nonsparking & Non Magnetic)
• GGG-W-643 - Wrench, Pipe, Internal-Gripping
• GGG-W-644 - Wrench, Socket (Wheel Nut)
• GGG-W-645 - Wrench, Open End Box (& Box Combination, Crowfoot, Ratchet,& Ratchet Crowfoot)
• GGG-W-646 - Wrench, Open End, Ratchet (Tac Pattern), for Tube Fittings,Electric Cable Terminals &
• GGG-W-647 - Wrench, Bung, and Wrench, Drain Plug(Canceled,Superseded By A-A-3086+
• GGG-W-648 - Wrench, Lineman's
• GGG-W-649 - Wrench, Plier, Clamp, Plier, and Plier, Tubing Pinch
• GGG-W-651 - Wrench, Pipe Wrench & Basin Wrench
• GGG-W-652 - Wrenches, Socket-Head Screws +Cancelled, 1964, Superseded By GGG-K-275
• GGG-W-653 - Wrench, Ratchet, Reversible
• GGG-W-656 - Wrench, Socket (Set, Spark Plug, Hand, Including Handles +Cancelled, 1963, No S/S Docu
• GGG-W-657 - Wrench, Socket (Spin Type, Screwdriver Grip)
• GGG-W-665 - Wrench, Spanner
• GGG-W-675 - Wrench, Socket (Spin Type, Screwdriver Grip) +Cancelled, 1994, No S/S Document+
• GGG-W-680 - Wrenches, Tap & Reamer, Adjustable
• GGG-W-686 - Wrench, Torque, Unidirectional
• GG-I-271 - Igniter, Friction, Oxyacetylene-Torch
• HTI-B173.1 - For Hand Tools - Nail Hammers - Safety Requirements
• HTI-B173.3 - For Hand Tools - Heavy Striking Tools - Safety Requirements
• HTI-B173.8 - For Hand Tools - Riveting, Scaling & Tinners' Setting Hammers - Safety Requirements
• JAN-C-526 - Compressors, Piston-Ring, Band Type
• KK-P-91 - Palms, Sewing, (Sailmakers' & Saddlers')
• LLL-B-211 - Bellows, Hand; Foundry, Section 4 (Part 5) +Cancelled, 1987,No S/S Document+
• LLL-M-71 - Mallets & Mauals, Wood
• MA-1547 - Wrenches, Twelve Spline, Metric
• MA-4534 - Socket Wrenches, Hand (Metric) (STABILIZED Feb 2013)
• MIL-A-11736 - Aligning Tool, Treadway (No Superseding Document)
• MIL-A-3908 - Auger, Posthole, Hand (Superseded by A-A-59219)
• MIL-B-17485 - Brush, Water, Molder's (Navy)
• MIL-B-18864 - Bender, Electrical Conduit, Hand, Portable (Use GGG-B-175)
• MIL-B-2678 - Brushes, Wire, Boiler Tube, Expanding Type for Use With Electric and Air Motor Driven Boiler Tube Cleaning Outfits, and Fixed Sectional Hand Type (Superseded by A-A-59193)
• MIL-B-2679 - Brushes, Wire, Boiler-Tube, Sectional Type, Handpush (Superseded by MIL-B-2678)
• MIL-B-43407 - Bars, Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-B-6739 - Battery, 12-Volt, 17-Ampere-Hour, Shielded Storage
• MIL-B-85643 - Bits, Screwdriver, Ribbed General Specification for (Superseded by NASM-85643)
• MIL-B-85643/1 - Bit, Screwdriver, Phillips, Ribbed, Cruciform, Insert Type, External Hexagon Shank, Manually Driven (Superseded by NASM-95643/1)
• MIL-B-85643/2 - Bit, Screwdriver, Phillips, Ribbed, Cruciform, Long Shank, External Hexagon Shank, Power Driven (Superseded by NASM-85643/2)
• MIL-B-85643/3 - Bit, Screwdriver, TORQ-Set, Ribbed, Offset Cruciform, External Hexagon Shank, Power Driven (Superseded by NASM-85643/3)
• MIL-B-85643/4 - Bit, Screwdriver, TORQ-Set, Ribbed, Offset Cruciform, Long Shank, External Hexagon Shank (Superseded by NASM-85643/4)
• MIL-B-85643/5 - Bit, Screwdriver, Insert Type, TORQ-Set, Ribbed, Offset Cruciform, External Hexagon Shank, Manually Driven (Superseded by NASM-85643/5)
• MIL-B-920 - Bars, Bucking, Rivet (Superseded by A-A-52123)
• MIL-B-951 - Bender, Tube, Multiple Bend, Manual (Superseded by GGG-B-191)
• MIL-B-9946 - Bits, Screwdriver, General Specification for (No Superseding Document)
• MIL-B-9946/1 - Bit, Screwdriver, Hi-Torque, Type I (No Superseding Document)
• MIL-B-9946/10 - Bit, Screwdriver, Six Spline, Straight, External Hex Shank, Manually Driven (No Superseding Document)
• MIL-B-9946/15 - Bit, Screwdriver, Phillips Ribbed, External Hex Shank, Manually Driven (No Superseding Document)
• MIL-B-9946/16 - Bit, Screwdriver, TORQ-Set, Ribbed, Externalhex Shank, Manually Driven (No Superseding Document)
• MIL-B-9946/2 - Bit, Screwdriver, Hi Torque, Type Ii (No Superseding Document)
• MIL-B-9946/3 - Bit, Screwdriver, Phillips (No Superseding Document)
• MIL-B-9946/4 - Bit, Screwdriver, Torq Set (No Superseding Document)
• MIL-B-9946/5 - Bit, Screwdriver, Hi-Torque, Type V (No Superseding Document)
• MIL-B-9946/9 - Bit, Screwdriver, Hex, External Hex Shank, Manually Driven (No Superseding Document)
• MIL-C-1425 - Cleaner, Generator, for Range, Field, M-1937
• MIL-C-1429 - Cleaner, Burner Slot, for Range, Field, M-1937 (No Superseding Document)
• MIL-C-1731 - Clamps, Saddler's Stitching
• MIL-C-19482 - Carrier, Storage Battery, Hand (Use GGG-C-1968)
• MIL-C-22520 - Crimping Tools, Terminal, Hand or Power Actuated, Wire Termination, and Tool Kits, General Specification for
• MIL-C-22520/1 - Crimping Tools, Terminal, Hand, Wire Termination for Wire Barrel Sizes 12 Through 20
• MIL-C-22520/10 - Crimping Tool, Terminal, Hand Wire Termination, Large for Coaxial, Shielded Contacts and Ferrules, Terminal Lugs, Splices and End Caps
• MIL-C-22520/17 - Crimping Tools, Terminal, Hand, Wire Termination for Crimp Type Removable Contacts, Electric Connectors
• MIL-C-22520/19 - Crimping Tool, Terminal, Hand, Wire Termination for Size 16 Shielded Contacts (Outer Contact)
• MIL-C-22520/2 - Crimping Tools, Terminal, Hand, Wire Termination for Wire Barrel Sizes 20 Through 28
• MIL-C-22520/20 - Crimping Tools, Terminal, Hand, Wire Termination for Size 16 Shielded Contacts (Shield Crimp Sleeve)
• MIL-C-22520/21 - Crimping Tool, Terminal, Hand, Wire Termination for Size 12 Shielded Contacts (Outer Contact)
• MIL-C-22520/22 - Crimping Tools, Terminal, Hand, Wire Termination for Size 12 Shielded Contacts (Shielded Crimp Sleeve)
• MIL-C-22520/24 - Crimping Tools, Terminal, Hand or Power Actuated, Wire Termination: Tool, for Lug Terminal and External Power Plug Socket Contacts, Size 22-10 (Superseded by MIL-DTL-22520/38)
• MIL-C-22520/25 - Crimping Tools, Terminal, Hand or Power Actuated, Wire Termination, Tool, for Crimp Style Electric Terminals Type I, Class 1 Terminals Under MIL-T-7928 and MIL-E-16366 (No Superseding Document)
• MIL-C-22520/31 - Crimping Tool, Terminal, Hand, for Shielded Size 12 Outer Contacts
• MIL-C-22520/32 - Crimping Tools, Terminal, Hand, Wire Termination for Connectors, Electrical, Flat Cable (Type 2)
• MIL-C-22520/34 - Crimping Tools, Terminal, Hand, Wire Termination, for Crimp Type Removable Contacts for MIL-C-28840 Connectors
• MIL-C-22520/36 - Compression Tool, Hand, Type 2 for Semirigid Coaxial Cable (Category F Connectors)
• MIL-C-22520/4 - Crimping Tool, Contact, Electric, Hand for Shielded Outer Contacts
• MIL-C-22520/5 - Crimping Tools, Terminal, Hand, Wire Termination, Large for Coaxial, Shielded Contacts and Ferrules, Terminal Lugs, Splices and End Caps (No Superseding Document)
• MIL-C-22520/7 - Crimping Tools, Terminal, Hand, Wire Termination for Wire Barrel Sizes 16, 20, and 22
• MIL-C-22520/COMPLETE - Complete Set of Current Slash Sheets for MIL-C-22520 (Including Current MIL-DTL-22520 Slash Sheets)
• MIL-C-28876/19 - Connectors, Fiber Optic, Environment Resisting, Inspection Tool (Superseded by MIL-I-81969/46)
• MIL-C-28876/20 - Connectors, Fiber Optic, Environment Resisting, Removal Tool (Superseded By MIL-I-81969/47)
• MIL-C-28876/21 - Connectors, Fiber Optic, Environment Resisting, Alignment Sleeve (Superseded By MIL-I-81969/48)
• MIL-C-28876/22 - Connectors, Fiber Optic, Environment Resisting, Fixture Assembly, Polishing Tool (Superseded By MIL-T-83523/6)
• MIL-C-28876/23 - Connectors, Fiber Optic, Environment Resisting, Installation Tool, Retaining Band (Superseded By MIL-T-83523/5)
• MIL-C-28876/24 - Connectors, Fiber Optic, Environment Resisting, Adapter Kit Torquewrench, Backshell Strain Relief (Superseded By MIL-T-83523/7)
• MIL-C-28876/25 - Connectors, Fiber Optic, Environment Resisting, Wrench Spanner, Strain Relief And Non-Strain Relief (Superseded By MIL-T-83523/8)
• MIL-C-40091 - Crimping Tool, Terminal, Hand
• MIL-C-418 - Crimper, Cap, m2 (Use MIL-C-43438)
• MIL-C-426 - Carrier, Timber, Hand (No Superseding Document)
• MIL-C-43438 - Crimper, Blasting Cap, m2, Plier Type, W/Fuse Cutter
• MIL-C-45806 - Compressor, Piston Ring, Open Clamp, Adjustable (Use GGG-C-555)
• MIL-C-55302/105 - Connector, Printed Circuit Subassembly and Accessories, Contact Insertion Tool, for Fork Type, Crimp Removeable Contacts (Superseded BYMIL-I-81969/5)
• MIL-C-55302/106 - Connector, Printed Circuit Subassembly and Accessories, Contact Removal Tool, for Fork Type, Crimp Removable Contacts (Superseded by MIL-I-81969/4)
• MIL-D-11586 - Driver, Armature Wedge (No Superseding Document)
• MIL-D-1801 - Dippers, (Steel, Hot Tinner, Graduated) (Supersedes Jqd 163B)
• MIL-D-43041 - Drivers, Bearing and Bushing
• MIL-D-52353 - Driftpins: Steel (No Superseding Document)
• MIL-DTL-22520 - Crimping Tools, Wire Termination, General Specification for
• MIL-DTL-22520/37 - Crimping Tool, Electrical, Wire Splicing, Hand Actuated, Type II, for Environmental Splices, Wire Range 26-12 AWG
• MIL-DTL-22520/38 - Crimping Tool, Terminal, Hand Actuated, Wire Termination, Type II, for External Power Plug Socket Contacts and Lug Terminal Sizes 22-10
• MIL-DTL-22520/40 - Crimping Tools, Terminal, Hand, Wire Termination; Type II T-Head for Terminal Lugs and Splices Size 22-14
• MIL-DTL-22520/41 - Crimping Tools, Terminal, Hand, Wire Termination; Type II for Terminals and Splices Size 10-14
• MIL-DTL-22520/42 - Crimping Tools, Terminal, Hand, Wire Termination; In-Service Inspection Gage
• MIL-DTL-32555 - Tool, installation, for Adjustable Tie-Down Straps, General Specification
• MIL-DTL-32555/1 - Tool, Installation, for Adjustable Tie-Down Straps
• MIL-DTL-32610 - Stripper, Cable, Hand, Electrical, Multi-Conductor, General Specification for
• MIL-DTL-32610/1 - Stripper, Cable, Hand, Electrical, Multi-Conductor, Diameter 0.081 to 0.180 Inch
• MIL-DTL-81306 - Tool, Installation for Adjustable Plastic and Metal Tiedown Straps (Superseded by SAE AS-81306)
• MIL-DTL-81969/39 - Installing and Removal Tool, Connector Electrical Contacts, Type III, Class 2 Composition B
• MIL-E-22520/36 - Egory F Connectors)
• MIL-F-3113 - Fid (Superseded by A-A-52129)
• MIL-F-4530 - Forceps, Sheet Holder, Straight Type (Use GGG-F-570)
• MIL-F-4560 - Flaring Tool, Tube, Hand Operated, Hammer Type, Designed for 5-16 Inch Tubing, Double Lap (Supersedes 50448)
• MIL-F-4571 - Fingers, Mechanical and Retieving Tool, Magnetic (Use GGG-F-360B)
• MIL-G-12434 - Grip, Cable, Jaw, Wedge and Roller Type (Use RR-G-700B)
• MIL-G-160 - Grip, Cable (Naval Shipboard Use)
• MIL-G-16567 - Grip, Cable (No Superseding Document)
• MIL-G-19721 - Generator and Motor, Direct Current, Submarine Propulsion Service
• MIL-G-3210 - Grip, Cable, Jaw (Use Rr&g&691)
• MIL-H-1431 - Hammer, Hand (Piton, Mountain) (Superseded by A-A-50096)
• MIL-H-18745 - Hammer, Hand, Nonsparking and Non-Magnetic
• MIL-H-19462 - Hammer, Hand, Automotive
• MIL-H-20206 - Heating Torches, Fuel Oil Burning, Portable (No Superseding Document)
• MIL-H-20638 - Hook, Cant (No Superseding Document)
• MIL-H-2228 - Hammer, Stunning, 4 Pound
• MIL-H-2814 - Hook, Materials Handling, Hand, Meat: and Hooks, Meat Hanging (No Superseding Document)
• MIL-H-3663 - Hammer, Hand (Optical) (Superseded by A-A-53193)
• MIL-H-4034 - Handle, Torque Indicating (Use GGG-W-686)
• MIL-H-43118 - Hammer, Impact, Manual for Driving 4 Inch, 6 Inch and 8 Inch Arrowhead Ground Anchors
• MIL-H-52802 - Hook, Steel: Bolted Tank Erection (No Superseding Document)
• MIL-H-795 - Holder, Sheet Metal, Hole and Edge Grip (Use GGG-H-575)
• MIL-HDBK-1646 - Selection of Electrical Contacts, Connectors and Associated Servicing Tools
• MIL-I-11519 - Intrenching Tool, Hand (Use MIL-I-43684)
• MIL-I-1239 - Igniters, Oxyacetylene-Torch (Use GG-I-271)
• MIL-I-1281 - Igniter, Wp or Na, m15 or m16 (Explosive Type)
• MIL-I-1751 - Iron, Branding
• MIL-I-43684 - Intrenching Tool, Hand, Folding, Lightweight (Superseded by A-A-59337)
• MIL-I-81969 - Installing and Removal Tools, Connector Electrical Contact, General Specification for
• MIL-I-81969/1 - Installing and Removal Tools, Connector Electrical Contact, Type III, Class 1, Composition C
• MIL-I-81969/10 - Installing and Removal Tools, Connector Electrical Contact, Types I and II, Class 2, Composition B
• MIL-I-81969/11 - Installing and Removal Tools, Connector Electrical Contact, (Fork Type, Wrappost/Crimp Removable), Type II, Class 1, Composition C
• MIL-I-81969/12 - Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2, Composition A
• MIL-I-81969/13 - Installing and Removal Tools, Connector Electrical Contact (Type CR), Type I, Class 1, Composition A
• MIL-I-81969/14 - Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2, Composition B
• MIL-I-81969/15 - Installing and Removal Tools, Connector Electrical Contact Type II, Class 2, Composition A
• MIL-I-81969/16 - Installing and Removal Tools, Connector Electrical Contact, Type III, Class 1, Composition B
• MIL-I-81969/17 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C
• MIL-I-81969/18 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C
• MIL-I-81969/19 - Installing and Removal Tools, Connector Electrical Contact Type II, Class 1, Composition C
• MIL-I-81969/2 - Installing and Removal Tools, Connector Electrical Contact Type I, Class 1, Composition C
• MIL-I-81969/20 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition A or B
• MIL-I-81969/21 - Installing and Removal Tools, Connector Electrical Contacts, Interfacial Seal, Type III, Class 1, Composition A
• MIL-I-81969/22 - Installing and Removal Tools, Connector Electrical Contact, (Crimp Removable), Type II, Class 1, Composition A
• MIL-I-81969/23 - Installing and Removal Tools, Connector Electrical Contact, (Crimp Removable), Type I, Class 1, Composition A
• MIL-I-81969/24 - Installing and Removal Tool, Connector Electrical Contact, Type Ii, Class 2, Composition a or C (No Superseding Document)
• MIL-I-81969/25 - Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2, Composition C
• MIL-I-81969/26 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1 or 2, Composition A, (for Removal of Integrated Circuit Packages and Similar Devices from Sockets, Receptacles, or Printed Wiring Boards)
• MIL-I-81969/27 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition A
• MIL-I-81969/28 - Installing and Removal Tools, Connector Electrical Contacts, Type II, Class 2, Composition C
• MIL-I-81969/29 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition B
• MIL-I-81969/3 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition C
• MIL-I-81969/30 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 2, Composition C
• MIL-I-81969/31 - Installing and Removal Tools, Connector Electrical Contact, Type III, Class 1, Composition A
• MIL-I-81969/33 - Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition A (for Use with MIL-C-28840)EC (Connectors)
• MIL-I-81969/34 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition A (for Use on MIL-C 28840 (EC) Connectors)
• MIL-I-81969/35 - Installing and Removal Tool, Connector Electrical Contact, Type Ii, Class 3, Composition a (No Superseding Document)
• MIL-I-81969/36 - Installing and Removal Tool, Connector Electrical Contact, Type Ii, Class 1, Composition a (No Superseding Document)
• MIL-I-81969/37 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 1, Composition a (No Superseding Document)
• MIL-I-81969/38 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 3, Composition a.
• MIL-I-81969/39 - Installing and Removal Tool, Connector Electrical Contacts, Type Iii, Class 2, Composition
• MIL-I-81969/4 - Installing and Removal Tools, Connector Electrical Contact, (Fork Type, Wrappost/Crimp Removable), Type II, Class 1 Composition C
• MIL-I-81969/40 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class 1, Composition B (No Superseding Document)
• MIL-I-81969/41 - Installing and Removal Tools, Connector Electrical Contact, Type Ii, Class I, Composition C (No Superseding Document)
• MIL-I-81969/42 - Installing and Removal Tools, Connector Electrical Contact, Type Iii, Class I, Composition a (No Superseding Document)
• MIL-I-81969/43 - Installing and Removal Tools, Socket Head, Electronic Components Type II, Class I, Composition C
• MIL-I-81969/45 - Installing Tool, Solderless Spring Contact, Type I, Composition A
• MIL-I-81969/5 - Installing and Removal Tools, Connector Electrical Contact, (Fork Type, Crimp Removable), Type I, Class 1, Composition A
• MIL-I-81969/6 - Installing and Removal Tools, Connector Electrical Contact, (Type II, Class 1, Composition A)
• MIL-I-81969/7 - Installing and Removal Tools, Connector Electrical Contact, (Type D Connector) Type III, Class 1 and 2, Composition A
• MIL-I-81969/8 - Installing and Removal Tools, Connector Electrical Contact, Types I and II, Class 2, Composition A
• MIL-I-81969/9 - Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition A
• MIL-J-13193 - Jack LC-13 and Axle LC-31 (for Cable Reel Lifting and Supporting) (Use Federal Specification GGG-J-51,
• MIL-J-1752 - Jack, Wagon
• MIL-J-18594 - Jack, Hand, Hydraulic (Axle)
• MIL-J-18595 - Jack, Hand, Hydraulic (Tripod Wing)
• MIL-J-45075 - Jack Kits, Hydraulic, Hand (Use GGG-J-60)
• MIL-J-4975 - Jack, Hand, Hydraulic, Axle, 7 Ton Cap., Type mc-1 (No Superseding Document)
• MIL-J-7821 - Jacks, 3 Stage, Axle (12 Ton)
• MIL-K-20649 - Knife, PH-50
• MIL-K-21120 - Key, Socket Head Screw, Hexagon, Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-K-934 - Key, Cowl Fastener (Use GGG-K-266)
• MIL-L-18947 - Lappers, Poppet Valve, Hand Powered (Superseded by A-A-59221)
• MIL-M-15926 - Marlinespike (No Superseding Document)
• MIL-M-16944 - Marker, Stitch Spacing
• MIL-M-17476 - Molder Tool, Lifter, Slick, Trowel and Spoon
• MIL-N-43186 - Needle, Etching, Hand (No Superseding Document)
• MIL-P-1215 - Pinch-Off Tool, Tubing (No Superseding Document)
• MIL-P-12415 - Pike, Pole, 8-and 16-Foot (Superseded by MIL-P-43116a)
• MIL-P-1382 - Pot, Fire, Gasoline (Use GGG-P-596)
• MIL-P-16208 - Punch and Die, Grommet Inserting (No Superseding Document)
• MIL-P-16697 - Pliers, Punch, Ophthalmic Lens
• MIL-P-1753 - Pliers, Pincers, Saddlers
• MIL-P-18488 - Pullers, Fuse (Use W-P-796)
• MIL-P-18724 - Puller, Ratchet-Lever, Cable Type, Hand Operated, 3000 Pound Capacity
• MIL-P-19827 - Pike Pole, 10-and 14-Foot (Superseded by MIL-P-43116a)
• MIL-P-2000 - Pincers, Blacksmiths, Shoeing
• MIL-P-22372 - Press, Grommet and Eyelet and Snap Fastener Setting, Bench Mounted, Foot Operated (No Superseding Document)
• MIL-P-40090 - Puller, Steering Wheel
• MIL-P-40103 - Pliers, Brake Repair (for Removing and Replacing Brake Shoe Springs).
• MIL-P-43116 - Pike, Wire and Pikes, Pole (No Superseding Document)
• MIL-P-5686 - Pulley, Grease Lubricated Anti Friction Bearing Control
• MIL-P-9938 - Press, Lead Seal, Hand, and Dies
• MIL-P-9952 - Pin Straighteners, Electron Tube, Miniature Type (Use GGG-P-00340)
• MIL-R-17736 - Rammer, Molder S Hand, Foundry
• MIL-R-43040 - Removal Tools, Connector Electrical Contact (No Superseding Document)
• MIL-R-45067 - Retrieving Tool, Magnetic (Use GGG-F-360)
• MIL-S-1255 - Stakes and Plates (Bench), Coppersmiths, Tinsmiths, and Sheet-Metal-Workers
• MIL-S-1485 - Shovel, Hand, Fire
• MIL-S-15825 - Scriber, Diamond Point (Superseded by A-A-52209)
• MIL-S-17044 - Screwdriver, Reversible (No Superseding Document)
• MIL-S-18190 - Smoothing Irons, Asphalt, and Heater, Asphalt Tool (Use MIL-S-28565)
• MIL-S-19106 - Screwdriver, Ratchet, Right Angle Offset, Right and Left Hand Turning (Superseded by GGG-S-1408)
• MIL-S-21111 - Screwdrivers, Flat Tip, Offset, and CROSSTIP-Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-S-28565 - Smoothing Irons, Asphalt, Self-Heating, IMETHYLACETYLENE-Propadiene Gas Fired (No Superseding Document)
• MIL-S-330 - Stick, Cruiser, Timber (No Superseding Document)
• MIL-S-446 - Spoon, Miner's (No Superseding Document)
• MIL-S-45179 - Stitchers, Cementing and Vulcanizing, and Rollers, Hand (No Superseding Document)
• MIL-S-4567 - Screwdrivers, Ratchet, Offset, Common and Crosspoint
• MIL-S-4998 - Swager, Armored Cable Terminal 1-8 Inch, Type A-1
• MIL-S-6180 - Swaging Tools, Flexible Cable Terminal, Hand-Operated (No Superseding Document)
• MIL-STD-1646 - Servicing Tools for Electric Contacts and Connections, Selection and use of
• MIL-STD-230 - Wrench, Open End, Adjustable, Wrench, Auto, Adjustable, and Wrench, Monkey, Classification of Defects For
• MIL-STD-231 - Wrench, Open End, Fixed, and Wrench, Box, Classification of Defects For
• MIL-STD-247 - Screw-Drivers and Screw-Holders (Starters), Classification of Defects For
• MIL-T-11591 - Tamper, Armature Coil Winding (No Superseding Document)
• MIL-T-14143 - Tools, Setting, for Snap Fasteners and Eyelets
• MIL-T-21309 - Tools for Inserting and Extracting Helical Coil Wire Screw Thread Inserts (Superseded by A-A-59158)
• MIL-T-22910 - Tool, Crimping, Hand, for Crimp Style Electric Terminal and Shield Ferrule (No Superseding Document)
• MIL-T-22910/1 - Tool, Hand, Kit Case, for 22910/2 and 22910/3 Crimping Tools and Dies (Superseded by MIL-T-22910/6a)
• MIL-T-22910/2 - Tool, Hand, Eight Inch, With Removable Die, for Two Piece Shield Terminating Ferrule (Superseded by MIL-T-22910/7a)
• MIL-T-22910/3 - Tool, Hand, Twelve Inch, With Removable Dies for Two Piece Shield Terminating Ferrules (Superseded by MIL-T-22910/7a)
• MIL-T-22910/6 - Tool, Kit Case for 22910/7 Crimping Tools and Dies (Superseded by MIL-C-22520/9)
• MIL-T-22910/7 - Tool, Hand, 10.75 Inch, With Removeable Dies for Two Piece Shield Terminating Perrules (Superseded by MIL-C-22520/5)
• MIL-T-4572 - Tool, Inserting, Tire Valve Stem (Supersedes 50484)
• MIL-T-45832 - Tester, Spring, Resiliency (for Distributor Breaker Arms and Generator and Starting Motor Brushes Spring Tension) (Superseded by MIL-T-43560)
• MIL-T-4901 - Tool, Ignition Cable Ferrule Crimper, Type A-1 (Supersedes 50480)
• MIL-T-55619 - Tool, Crimping, for Coaxial, Radio Frequency, Connectors, General Specification for (Superseded by MIL-C-22520, Now MIL-DTL-22520)
• MIL-T-55619/1 - Tool, Crimping, for Coaxial, Radio Frequency, Connectors (Style 2) (Superseded by MIL-C-22520/5C)
• MIL-T-81306 - Tool, Forming, for Adjustabel Plastic and Metal Cable Straps
• MIL-T-82070 - Tire Iron, Tire and Rim Servicing (No Superseding Document)
• MIL-T-83508 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, General Specification for (No Superseding Document)
• MIL-T-83508/1 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Type 2, for Wrapping (No Superseding Document)
• MIL-T-83508/10 - Took, Solderless Wrap, Hand or Power Actuated, Wire Termination, Types 1, 2, 3, and 4, (Wrap Sleeve), for Wrapping (No Superseding Document)
• MIL-T-83508/11 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Types 5, for Unwrapping (No Superseding Document)
• MIL-T-83508/3 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Type 2, for Wrapping (No Superseding Document)
• MIL-T-83508/5 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Type 1, for Wrapping (No Superseding Document)
• MIL-T-83508/7 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Type 4, for Wrapping (No Superseding Document)
• MIL-T-83508/8 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Type 5, for Wrapping (No Superseding Document)
• MIL-T-83508/9 - Tool, Solderless Wrap, Hand or Power Actuated, Wire Termination, Types 1, 2, 3, and 4, (Wrapping Bits), for Wrapping (No Superseding Document)
• MIL-T-83523/5 - Tools, Fiber Optic, Retaining Band Strain Relief, Type Vii (No Superseding Document)
• MIL-T-83523/6 - Tools, Fiber Optic, Polishing Fixture Assembly, Type Iv (No Superseding Document)
• MIL-T-83523/7 - Tools, Fiber Optic, Wrench and Adapter, Torque Strain Relief, Type V (No Superseding Document)
• MIL-T-83523/8 - Tools, Fiber Optic, Wrench, Spanner, Type V (No Superseding Document)
• MIL-T-83724 - Tool, Crimping, Contact, Electric Connector (Use MIL-C-22520)
• MIL-T-9935 - Tacker, Lever, Hand Operated (Use GGG-T-20)
• MIL-V-1615 - Vise, Ski
• MIL-W-10442 - WRENCHES, SPANNER and HYDRANT (SUPERSEDED BY GGG-W-665)
• MIL-W-10698 - Wrench, Open End, and Wrench Assembly, Stamped Steel (Superseded by A-A-59220)
• MIL-W-10812 - Wrenches, Range, Field, M-1937
• MIL-W-12307 - Wrench, Valve-Removing, m1 and m2
• MIL-W-13124 - Wrench, Torque Indicating (Use GGG-W-686)
• MIL-W-17912 - Wrench, Open-End Adjustable, and Wrench, Monkey, Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-W-19288 - Wrench, Bung (for Steel Drums) (Use GGG-W-644)
• MIL-W-19762 - Wrench, Pipe, Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-W-19928 - Wrench, Box, and Open-End, Fixed, Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-W-21350 - Wrenches, Rim Nut (Lug), Bung, and Lineman's (Use GGG-W-644)
• MIL-W-23514 - Wrench, Spanner, Adjustable Hook, Nonsparking and Nonmagnetic (No Superseding Document)
• MIL-W-25265 - Wrench, Igniter, Rocket Engine, Type mc-1
• MIL-W-26101 - Wrench Set, Nonsparking
• MIL-W-26497 - Wrench, Torque, Screwdriver Type (Superseded by ASME-B107.14m)
• MIL-W-2997 - Wrench, Water Jacket Disassembling
• MIL-W-40145 - Wrenches, Crowfoot, Special (No Superseding Document)
• MIL-W-43005 - Wrench, Torque, (Preset), for Tube Fittings 130161
• MIL-W-43105 - Wrenches, Socket, Wheel Stud Nut, Double End: and Handles, Bar (No Superseding Document)
• MIL-W-470 - Wrench, Gas-Cylinder-Valve and Manifold-Wing-Nut
• MIL-W-7114 - Wrench, Spark Plug Elbow Square Drive (Use GGG-C-1507)
• MIL-W-8982 - Wrenches, Splined, High Strength, Thin Wall, General Specification For
• MIL-W-8982/1 - Wrench, Splined Socket, Square Drive, High Strength, Thin Wall
• MIL-W-8982/2 - Wrench, Box, Splined, High Strength, Thin Wall
• MIL-W-8982/3 - Wrench, Torque Adapter, Splined, Square Drive, High Strength, Thin Wall
• MIL-W-8982/4 - Wrench, Box, Ratcheting, Splined, High Strength, Thin Wall
• MIL-W-8982/5 - Wrench, Universal Socket, Splined, Square Drive, High Strength, Thin Wall
• MIL-W-8982/6 - WRENCH, COMBINATION BOX and OPEN END, HIGH STRENGTH, THIN WALL
• MS-14035 - Bit, Installing Tool, Contact, Electrical Connector, Bit, Removal Tool, Contact, Electrical Connector (No Superseding Document)
• MS-14036 - Bit, Installing Tool, Contact, Electrical Connector (No Superseding Document)
• MS-14037 - Crimping Tool, Terminal Hand, Electrical Connector Contact, Class 1 (Use MIL-C-22520/4)
• MS-14166 - T-Wrench, URT-33 Radio Beacon
• MS-15010 - Wrench for Military Standard Cutting Torch
• MS-15127 - Pliers, Type S (8-Inch Size); Classification of Defects (Use SCDS-42)
• MS-15129 - Pliers, Type F, Class 1, Style 1; Classification of Defects (Use SCDS-40)
• MS-15130 - Pliers, Type H; Classification of Defects (Use SCDS-41)
• MS-15131 - Pliers, Type N, Class 2; Classification of Defects (SCDS-45)
• MS-15132 - Pliers, Type N, Class 1; Classification of Defects (Use SCDS-45)
• MS-15133 - Pliers, Type P; Classification of Defects (Use SCDS-42)
• MS-15134 - Pliers, Type K; Classification of Defects (Use SCDS-42)
• MS-15135 - Pliers, Type T; Classification of Defects (Use SCDS-46)
• MS-15136 - Pliers, Type l; Classification of Defects (Use SCDS-43)
• MS-15153 - Containers, (Cans, Pails, and Drums), Steel, Filled; Inspection (Cancelled, No Superseding Document)
• MS-15154 - Pliers, Flat Wide Nose With Cutter; CLASSIFI-Cation of Defects (Use SCDS-42)
• MS-15155 - Hammer Hand; Tack, Magnetic Head; Inspection Standard (Cancelled, No Superseding Document)
• MS-15157 - Thimble, Steel, Saddlers, (Leather Working), Classification of De... (Cancelled, No Superseding Document)
• MS-15160 - Pliers, Type D; Classifications of Defects (Use SCSD-39)
• MS-15161 - Pliers, Long Needle Nose, Without Cutter Classification of (Use SCDS-46)
• MS-15162 - Pliers, Duckbill, Long, Scored Jaw, With-Out Cutter; Classification of (Use SCDS-42)
• MS-15167 - Packing Tools, Extracting and Tamping; INSPEC-Tion Standard (Cancelled, No Superseding Document)
• MS-15218 - Screwdriver, Flat Tip, Cabinet Straight Sides, Plastic Handle, Plain
• MS-15219 - Screwdriver, Flat Tip, Common, Flared Sides, Plastic Handle, Design a, Shape A
• MS-15220 - Screwdriver, Flat Tip, Extra Heavy Duty, Steel Handle With Wood Inserts
• MS-15221 - Screwdriver, Flat Tip, Close Quarter
• MS-15222 - Screwdriver, Flat Tip, Common, Flared Sides With Screw-Holder, External Gripping
• MS-15223 - Screwdriver, Screw-Holding, Screw Slot Gripping, Plastic Handle
• MS-15224 - Screwdriver, Cross Tip, Straight, Phillips, Plastic Handle
• MS-15225 - Screwdriver, Ratchet, Common, Straight
• MS-15226 - Screwdriver, Ratchet, Double Spiral, Automatic Return
• MS-15227 - Screwdriver, Double Offset, Single Flat Tip Each End
• MS-15228 - Screwdriver, Double Offset Phillips Cross Tip Eachend
• MS-15229 - Screwdriver, Four Way Offset, Double Flat Tips Each End
• MS-15230 - Screwdriver, Jewelers, Swivel Knob, Interchangeable Blades
• MS-15231 - Screwdriver, Jewelers, Nometallic Handle, Nonremovable Blade
• MS-15232 - Screwdriver, Flat Tip, Pocket, Removable Blade
• MS-15233 - Screwdriver, Flat Tip, Pocket Clip
• MS-15234 - Screwdriver, Spark Plug Testing
• MS-15235 - Screwdriver, Cross Tip, Straight, Reed and Prince,Plastic Handle
• MS-15236 - Screwdriver, Double Offset, Reed and Prince Cross Tip Each End
• MS-15244 - Hammers, Hand, Carpenters: Inspection STAN- Dard (Cancelled,No Superseding Document)
• MS-15245 - Hammers Hand; Machinists; Inspection STAN- Dard (Cancelled, No Superseding Document)
• MS-15259 - Vise, Bench, Clamp Base, (Utility), Stationary Base
• MS-15260 - Vise, Bench, Clamp Base, (Utility), Swivel Base
• MS-15261 - Vise, Blacksmith S
• MS-15262 - Vise, Sheetmetal Worker S
• MS-15263 - Vise, Bench and Pipe, (Swivel Base, Stationary Jan)
• MS-15264 - Vise, Hand, Combination Bench and Hand With Bench Clamp
• MS-15266 - Vise, Jeweler S Swivel Base
• MS-15268 - Vises, Machinist S, Swivel Base, Stationary Jaw
• MS-15269 - Vises, Machinist S Swivel Base, Swivel Jaw
• MS-15270 - Vises, Patternmaker S
• MS-15271 - Vises, Pin, Metal Handle
• MS-15272 - Vises, Pipe, Chain
• MS-15273 - Vises, Pipe, Hinged Jaw
• MS-15274 - Vises, Pipe, Open Side
• MS-15275 - Vises, Wire Rope Splicing
• MS-15276 - Vises, Handsaw Filing (Use GGG-V-436)
• MS-15277 - Vises, Bandsaw Filing
• MS-15278 - Vise, Woodworker S Quick Acting
• MS-15301 - Wrenches, Pipe, Adjustable (Types I, Ii, and VI) (Cancelled, No Superseding Document)
• MS-15380 - Pliers, Battery (Without Cutter)
• MS-15381 - Pliers, Slip Joint, Multiple Tongue and Groove, Angle Nose (Without Cutter)
• MS-15382 - Pliers, Slip Joint, Combination Jaw Straight Nose, Regular (With Cutter)
• MS-15383 - Pliers, Slip Joint, Combination Jaw, Straight Nose, Thin (With Cutter)
• MS-15384 - Pliers, Combination Jaw, Flat Nose (With Cutters)
• MS-15386 - Pliers, Flat Nose, Medium Nose, (Without Cutter)
• MS-15388 - Pliers, Flat Nose, Wide Nose (With Cutter)
• MS-15389 - Pliers, Gas (Without Cutter)
• MS-15390 - Pliers, Glass
• MS-15391 - Pliers, Lineman's (With Side Cutter)
• MS-15392 - Pliers, Lineman's (With Side Cutter and Wire Skinner)
• MS-15393 - Pliers, Round Nose, Round Jaw (Without Cutter)
• MS-15394 - Pliers, Round Nose (Chain), Long Nose (With Cutter)
• MS-15396 - Pliers, Round Nose (Needle), Curved Nose (Without Cutter) 140461
• MS-15397 - Pliers, Round Nose (Needle), Straight Nose (Without Cutter)
• MS-15398 - Pliers, Parallel-Action Jaw (With Side Cutter)
• MS-15432 - Screwdriver, Flat Tip, Common, Flared Sides, Plastic Handle, Design a, Shape B
• MS-15433 - Screwdriver, Flat Tip, Common, Flared Sides, Plastic Handle, Design B, Shape B
• MS-15434 - Screwdriver, Screw-Holding Screw Slot Gripping, Metal Handle
• MS-15435 - Bit, Screwdriver, Cross Point, Reed and Prince for Ratchet, Double Spiral, Automatic Return
• MS-15436 - Bit, Screwdriver, Cross Point, Phillips for Ratchet, Double Spiral, Automatic Return
• MS-15437 - Bit, Screwdriver, Flat Tip, for Ratchet, Double Spiral, Automatic Return
• MS-15450 - Screwdriver, Flat Tip, Cabinet, Straight Sides, Plastic Handle, Bolster, Forged
• MS-15461 - Wrenches, Open End, Adjustable, Single Head, Straight Handle
• MS-15462 - Wrench, Monkey
• MS-15468 - Dog, Shipwright S, 3/4 Inch
• MS-15469 - Dog, Shipwright S, 5/8-Inch
• MS-15475 - Press, Lead Seal, Hand, Inspection and Acceptance, DOD (Use MIL-I-19709)
• MS-15486 - Vise, Circular Saw Filing
• MS-15490 - Wrench, Plier, Two Straight Jaw
• MS-15491 - Wrench, Plier, Curved Jaw (With Cutter)
• MS-15502 - Vises, Contour Gripping
• MS-15722 - Calking Iron, Wood, Single Crook, Creaseless
• MS-15723 - Calking Iron, Wood, Straight, Creaseless
• MS-15724 - Calking Iron, Wood, Deck and Dumb, Creaseless
• MS-15725 - Calking Tool, Wood, Single Crook
• MS-15726 - Calking Iron, Wood, Making, Straight, Single Crease
• MS-15727 - Calking Iron, Wood, Making, Straight, Double Crease
• MS-15728 - Calking Iron, Wood, Making, Single Crook, Creaseless
• MS-15729 - Calking Iron, Wood, Reefing Hook, Creaseless
• MS-15730 - Calking Iron, Wood, Reefing, Creaseless
• MS-15731 - Calking Iron, Wood, Spike, Bent, Creaseless
• MS-15732 - Calking Iron, Wood, Spike, Straight, Creaseless
• MS-15743 - Wrench, Auto, Adjustable
• MS-15768 - Auger, Water Closet, Hand
• MS-15769 - Auger, Pipe and Sewer, Hand, Flexible, Coil Spring, Sliding Crank Handle
• MS-15770 - Auger, Pipe and Sewer, Hand, Top Snake, Heavy Duty
• MS-15774 - Square Drive End Standards, Hand Type (Male and Female ) (for Use With Square Drive Sockets and Attachments)
• MS-15777 - Handle, Screwdriver Bit, Plastic, With Clutch Drive
• MS-15778 - Bits, Screwdriver, Phillips Cross Tip, for Clutch Drive Handle
• MS-15779 - Bits, Screwdriver, Cabinet Type Tip, for Clutch Drive Handle
• MS-15780 - Extension, Screwdriver Bit, for Clutch Drive Handle
• MS-15792 - Scriber, Machinist S Double Point, Straight and Bent, Removable
• MS-15793 - Scriber, Machinist S Double Point Straight and Bent, Adjustable Sleeve
• MS-15794 - Scribers, Machinist S, Pocket, Single Point, Nonrolling Head
• MS-15796 - Cutters, Abrasive Steel Dresser, Hand (No Superseding Document)
• MS-15797 - Dresser, Abrasive Steel, Hand
• MS-15812 - Screwdriver, Flat Tip-Cross Tip, Close Quarter
• MS-16023 - Screwdrivers, Screw Holding, Screw Slot Gripping, Sliding Action, Plastic Handle
• MS-16130 - Block, Dolly, Sheet Metalworking General Purpose, High Crown
• MS-16131 - Block, Dolly, Sheet Metalworking, General Purpose, Low Crown
• MS-16132 - Block, Dolly, Sheet Metalworking General Purpose, Anvil
• MS-16133 - Block, Dolly, Sheet Metalworking, General Purpose, Rail
• MS-16134 - Block, Dolly, Sheet Metalworking, Heel
• MS-16135 - Block, Dolly, Sheet Metalworking, Toe
• MS-16136 - Block, Dolly, Sheet Metalworking, Wedge
• MS-16137 - Block, Dolly, Sheet Metalworking, Body
• MS-16138 - Block, Dolly, Sheet Metalworking, Shrinking, With Trenching Grooves
• MS-16139 - Block, Dolly, Sheet Metalworking, Fender
• MS-16140 - Block, Dolly, Sheet Metalworking, Roughing
• MS-16141 - Block, Dolly, Sheet, Metalworking, Thin, High Crow
• MS-16145 - Wrench, Spanner, Adjustable Combination, Hydrant and Spanner
• MS-16146 - Wrenches, Spanner, Adjustable Face Type
• MS-16147 - Wrenches, Spanner, Adjustable Hook Type, Fixed Pivot Point
• MS-16148 - Wrench, Spanner, Adjustable Hook Type, Sliding Jaw, Heavy Duty
• MS-16149 - Wrench, Spanner, Adjustable Hook Type, Variable Pivot Point
• MS-16150 - Wrench, Spanner, Hose Coupling Type, Double Eye
• MS-16151 - Wrenches, Spanner, Nonadjustable Face Type, Two-Pin
• MS-16152 - Wrench, Spanner, Universal Hose Coupling
• MS-16153 - Wrenches, Spanner, Pin Type, Hardened and Tempered Steel
• MS-16180 - Wrenches, Pipe, Heavy-Duty, Drop-Forged Steel or Cast Malleable Iron or Steel
• MS-16181 - Wrenches, Pipe, Heavy Duty, Forged Aluminum Alloy
• MS-16182 - Wrenches, Pipe, Chain
• MS-16183 - Wrenches, Pipe, Strap
• MS-16184 - Wrenches, Pipe, Angle Style
• MS-16185 - Wrench, Basin
• MS-16234 - Holders, Screwdriver Bit, Hand, Female Square Drive
• MS-16235 - Adapters, Socket Wrench, Hand, Male To Female
• MS-16236 - Bits, Screwdriver, Hand, Clutch Tip, Male Straight Hex Drive Shank
• MS-16237 - Bits, Screwdriver, Hand, Flat Tip (Drag Link), Female Square Drive Shank
• MS-16238 - Bits, Screwdriver, Hand, Flat Tip, Male Straight Hex Drive Shank
• MS-16239 - Bits, Screwdriver, Hand, Socket-Head Set and Cap Screw, Male Straight Hex Drive Shank
• MS-16240 - Bits, Screwdriver, Hand, Phillips Type Cross Tip, Male Straight Hex Drive Shank
• MS-16241 - Bits, Screwdriver, Hand, Reed and Prince Cross Tip, Male Straight Hex Drive Shank
• MS-16242 - Extension, Socket Wrench, Hand, Flexible Bar Type
• MS-16243 - Extensions, Socket Wrench, Hand Solid Bar Type
• MS-16244 - Handles, Socket Wrench, Hand, Brace (Speeder) Type, Double Revolving Grip
• MS-16245 - Handles, Socket Wrench, Hand, Hinged Type
• MS-16246 - Handles, Socket Wrench, Hand Impact Type
• MS-16249 - Handles, Socket Wrench, Hand Sliding T-Type
• MS-16250 - Handle, Socket Wrench, Hand, Spin (Screwdriver) Type
• MS-16251 - Crowfoot Attachments, Socket Wrench, Hand, Nonratcheting, Open End, Thin
• MS-16252 - Ratchet Attachments, Socket Wrench, Hand
• MS-16253 - Sockets, Socket Wrench, Hand, Deep Length, Hexagon and 12-Point
• MS-16254 - Sockets, Socket Wrench, Hand, Regular Length, 6-Point, 8-Point and 12-Point
• MS-16255 - Sockets, Socket Wrench, Hand Universal Joint Type, 12-Point
• MS-16257 - Universal Joints, Socket Wrench, Hand
• MS-16258 - Wrenches, Socket, Hand Single Socket Offset Type
• MS-16260 - Wrenches, Socket, Hand, Single Socket T-Type
• MS-16270 - Jacks, Screw, Hand, Standard Speed Upright or Inverted, With Foot Lift
• MS-16271 - Jacks, Screw, Hand, Standard Speed, Journal or Inverted
• MS-16272 - Jack, Screw, Hand, High Speed, Lever-or Governor-Lowering Control
• MS-16273 - Jacks, Screw, Hand, Bell Bottom
• MS-16274 - Jacks, Screw, Hand, Automobile or Truck, Geared Screw
• MS-16275 - Jacks, Screw, Hand Reel, Nonratchet Type
• MS-16277 - Jacks, Rack Bar, Solid Base With Foot Lift, Single Socket
• MS-16278 - Jack, Rack Bar, Solid Base With Foot Lift, Double Socket
• MS-16279 - Jack, Rack Bar, Hinged Base, Double Socket, Pole Pulling
• MS-16280 - Jacks, Hydraulic, Hand, Remote Control, Heavy Duty
• MS-16281 - Jacks, Hydraulic, Hand, Remote Control, General Purpose
• MS-16282 - Jacks, Hydrualic, Hand Self-Contained, Heavy Duty
• MS-16283 - Jacks, Hydraulic, Hand, Self-Contained, General Industrial and Vehicle
• MS-16289 - Knife, Putty, Semiflexible
• MS-16305 - Awl, Belt
• MS-16306 - Awls, Brad
• MS-16307 - Awl, Saddlers, Collar
• MS-16308 - Awl, Saddler S Harness
• MS-16309 - Awl, Saddler S Pad or Seat
• MS-16310 - Awl, Saddler S Sewing and Stitiching, Automatic, Enclosed Spool or Bobbin
• MS-16311 - Awl, Saddlers, Sewing and Stitching, Common
• MS-16312 - Awl, Scratch
• MS-16357 - Mallet, Hand, Rubber
• MS-16367 - Wrenches, Box and Open, Combination, 15-Degree Angular Offset Box End
• MS-16368 - Wrenches, Box Angular Offset Double Head Type and Double Offset Double Head, 12-Point, 15 Degree Head, Regular Length
• MS-16369 - Wrenches, Box, Double Offset Double Head, 12-Point, 45-Degree Head, Regular Length
• MS-16370 - Wrenches, Box, Double Offset Double Head, 12-Point, 45-Degree Head, Short Length
• MS-16371 - Wrenches, Box, Half-Moon Double Head, 12-Point
• MS-16372 - Wrenches, Box, Slugging, 12-Point, Long
• MS-16373 - Wrench, Box, Slugging, 12-Point, Short
• MS-16374 - Wrench, Box, Striking, 12-Point
• MS-16375 - Wrench, Box, Structural, 12-Point Class 3 External Threads
• MS-16376 - Wrenches, Open End Box, Flare Nut, Single End, 12-Point
• MS-16377 - Wrenches, Open End, Fixed, Double Head, 15-Degree Head Angle and 60-Degree Head Angle
• MS-16378 - Wrenches, Open End, Fixed, Double Head, 15-Degree Head Angle and 75- or 80-Degree Head Angle, Ignition
• MS-16379 - Wrenches, Open End, Fixed, Double Head, 15-Degree Head Angle, Ignition
• MS-16380 - Wrenches, Open End, Fixed, Double Head, 15-Degree Head Angle, Engineers
• MS-16381 - Wrenches, Open End, Fixed, Double Head, 15-Degree Head Angle, Tappet
• MS-16382 - Wrenches, Open End, Fixed, Single Head, 15-Degree Head Angle, Flared Handle and Tapered Handle, Engineers
• MS-16383 - Wrenches, Open End, Fixed, Structural
• MS-16384 - Wrench, Open End, Fixed, Thin Double Head, 15-Degree Head Angle, Jam Nut
• MS-16385 - Wrenches, Open End, Fixed, Thin Single Head, Straight Head (After 31 March 1967 Use GGG-W-636, Type Xv11, Class 2)
• MS-16552 - Gouges, Paring, Tanged, Straight Shank
• MS-16558 - Bender, Tube, Hand, Portable, Worm-Gear Actuated, Multiple Size
• MS-16559 - Bender, Tube, Hand, Portable, Lever Actuated, Multiple Size
• MS-16560 - Benders, Tube, Hand, Portable, Lever Actuated, Single Size
• MS-16561 - Benders, Tube, Hand, Portable, External Coil Spring
• MS-16618 - Wrenches, Ratchet, Reversible, Protruding Head, Reverse Mechanism in Handle, Single Hexagon Socket
• MS-16619 - Wrenches, Ratchet, Reversible, Protruding Head, Reverse Mechanism in Handle, Single Square Socket
• MS-16620 - Wrench, Ratchet, Reversible, Protruding Head, Reverse Mechanism in Head, Multisize Hexagon Socket
• MS-16621 - Wrenches, Ratchet, Reversible, Thin Head, Reverse Mechanism in Handle, Single Hexagon Socket
• MS-16622 - Wrenches, Ratchet, Reversible, Thin Head, Reverse Mechanism in Handle, Single Square Socket
• MS-16635 - Grip, Cable, Jaw, Eccentric
• MS-16636 - Grips, Cable, Jaw, Parallel, Bronze-Lined, Steel, Smooth
• MS-16697 - Installing Tool, Piston Pin Retainer
• MS-16846 - Jacks, Hydraulic, Hand, Self-Contained, Center Hole, Push-Pull
• MS-16852 - Stud Removers and Setters, Collet Grip, Housing With Bolt, Medium and Large.
• MS-16853 - Stud Removers and Setters, Collet Grip, Housing With Drive Screw, Small and Medium.
• MS-16854 - Stud Remover and Setter, Eccentric Grip
• MS-16855 - Stud Removers and Setters, Wedge Grip, Medium and Large.
• MS-16856 - Screwdrivers, Flat Tip, Heavy Duty, Flared Sides, Steel Handle With Wood Inserts, Round Blade
• MS-16868 - Extractors, Tap
• MS-16869 - Guides, Drill, Screw Extracting
• MS-16870 - Extractors, Screw, Straight, Straight Fluted, Sliding Turnout Nut
• MS-16871 - Extractors, Screw, Tapered, Spiral Flute or Ridged, Drill
• MS-17007 - Soldering Aid
• MS-17087 - Shovel, Hand, Square Point, Snow, D-Handle
• MS-17088 - Shovel, Hand, Round Point, D-Handle, Open Back, General Purpose
• MS-17089 - Shovel, Hand, Round Point, Long Handle, Open Back, General Purpose
• MS-17090 - Shovel, Hand, Snow or Barn, D-Handle, Open Back, General Purpose
• MS-17091 - Shovel, Hand, Square Point, Long Handle, Open Back, General Purpose
• MS-17092 - Shovel, Hand, Square Point, D-Handle, Open Back, General Purpose
• MS-17093 - Snow Pusher, Hand, Square Point, Long Handle
• MS-17094 - Shovels, Hand, Telegraph, Plain Back, Round Point, Straight Handle
• MS-17095 - Spoons, Telegraph, Hand, Eastern Pattern, Plain Back, Round Point, Straight Handle
• MS-17096 - Spade, Hand, Drain, D-Handle, Plain Back, Round Point
• MS-17097 - Spade, Hand, Ditch or Post, D-Handle, Plain Back, Square Point
• MS-17098 - Scoop, Sand and Gravel, Hand, D-Handle, Open Back, Round Point
• MS-17099 - Scoop, Eastern Pattern, Hand, D-Handle, Open Back, Square Point
• MS-17126 - Forks, Stone, Hand, D-Handle
• MS-17137 - Fillet Tools, Pattern Maker S
• MS-17138 - Bellows, Hand, Foundry
• MS-17139 - Heating Torches, Fuel Oil Burning, Portable Suction Type.
• MS-17255 - Pliers, Heat Coil
• MS-17256 - Pliers, Fence, Single Head
• MS-17257 - Pliers, Slip Joint, Angle Nose, Without Cutter, Multiple Hole
• MS-17258 - Pliers, Slip Joint, Compound Leverage, Multiple Hole
• MS-17259 - Pliers, Slip Joint, Bent Nose, Combination, With Cutter, Regular
• MS-17776 - Crimping Tool, Terminal, Hand, Lug Terminal and External Power Plug Socket Contacts, 22-10 Capacity (Use MIL-C-22520/24)
• MS-17805 - Installing Tool, Connector Electrical Contact Size 16 Contact (Use MIL-I-81969/18)
• MS-17806 - Remove Tool, Connector, Electrical Contact Size 16 Contact (Use MIL-I-81969/20)
• MS-17823 - Tool, Hand, for Adjustable Plastic Cable Straps (Thin Type) (Use ms-90387)
• MS-17824 - Tool, Hand, for Adjustable Plastic Cable Straps (Thick Type) (Use ms-90387)
• MS-18278 - Installing and Removal Tool, Connector, Electrical, Contact (Size 20 Contact)
• MS-19090 - Tongs, Blacksmiths, Straight Lip, Flat Jaw
• MS-19091 - Tongs, Blacksmiths, Curved Lip, Fluted Jaw
• MS-19092 - Tongs, Blacksmiths, Rivet Holding
• MS-19093 - Tongs, Blacksmiths, Single Pick Up
• MS-19094 - Tongs, Blacksmiths, Double Pickup
• MS-19095 - Tongs, Blacksmiths , (V) Shaped
• MS-19096 - Tongs, Blacksmiths, Gad
• MS-19097 - Wrenches, Tap and Reamer, Adjustable, T-Handle, Ratcheting Body, Sliding Handle
• MS-19098 - Wrench, Tap and Reamer, Adjustable, T-Handle, Solid Body, Nonsliding Handle
• MS-19099 - Wrench, Tap and Reamer, Adjustable, T-Handle, Solid Body, Sliding Handle
• MS-19100 - Wrenches, Tap and Reamer, Adjustable, Straight Handle
• MS-24256 - TOOL CONTACT CONNECTOR, ASSEMBLY AND DISASSEMBLY (USE MIL-I-81969/17 and MIL-I-81969/19)
• MS-25020 - Crimping Tool - Hand, for Aluminum Aircraft Cable Terminals
• MS-25037 - Crimping Tool, Hand, Class 1, for Copper Insulated Terminals, 26-10 (Use ms-90413)
• MS-25121 - Tool, Pretensioning, for Antenna Tension Takeup
• MS-25187 - Extractor, Electronic Tube (No Superseding Document)
• MS-25312 - Tool, Crimping, Hand, for Insulated Shield Ground (Asg)
• MS-25442 - Dies, for MS25441, Electric, Hydraulic Crimping Tool, (for Use with Aluminum Wire Terminals) (SUPERSEDED by SAE AS-5259/1)
• MS-27437 - Crimping Tool, Hand, Rf Type, Bnc Connector To Rg Cable (Use MIL-C-22520/5)
• MS-27495 - Tool, Contact, Connector Assembly and Disassembly (Superseded by MIL-I-81969/8)
• MS-27509 - Tool, Contact, Connector, Assembly and Disassembly (Use Ms 27534)
• MS-27534 - Tool, Contact Insertion-Extraction, Electrical Connector (Superseded by MIL-I-81969/14)
• MS-27828 - Crimping Tool, Electrical Connector Contacts, Hand (Use MIL-C-22520/1)
• MS-27831 - Crimping Tool, Electrical Connector Contacts, Hand, Miniature (Use MIL-C-22520/2)
• MS-3165 - Removal Tools, Connector, Electrical Contact Size 16, 8, 4 and 0 (Superseded by MIL-I-81969/29)
• MS-3191 - Tool, Hand, Crimp, Class 1 - for Contacts of Electric Connectors (Superseded by MIL-C-22520/1)
• MS-3195 - Indentor Configuration, Crimp Tools, for Contacts of Electric Connectors (Use MIL-C-22520/1)
• MS-3198 - Tool, Hand, Crimp, Miniature, Class 1 for Contacts of Electric Connectors (Use MIL-C-22520/2)
• MS-3313 - Tool Kit, Crimp, Miniature, for Contacts of Electric Connectors (Superseded by MIL-T-83507/17)
• MS-3316 - Tool, Crimp, Hand, for MIL-T-7928 Insulated Terminals, 12-10 (Superseded by MIL-C-22520/5C)
• MS-3480 - Tool, Connector Assembly, for MIL-C-5015 Connectors
• MS-3482 - Tool, Connector Assembly, for MIL-C-81511 Connectors
• MS-3483 - Removal Tools, Connector, Contact Electrical Size 8, 4 and 0 (Superseded by MIL-I-81969/15)
• MS-51006 - Wrench, Drain Plug, Straight Bar (No Superseding Document)
• MS-51800 - Driftpins, Brass (No Superseding Document)
• MS-63042 - Crimping Tool, Terminal, Hand.
• MS-63046 - Punch, Drive Pins, Brass
• MS-8516 - Wrench-1/2 Inch Square Drive Adjustable Spanner (3.5 To 6 Inches Dia) (No Superseding Document)
• MS-90387 - TOOL, HAND, ADJUSTABLE FOR PLASTIC and METAL TIEDOWN STRAPS
• MS-90413 - Tool, Crimp, Hand, for MIL-T-7928 Insulated Terminals, 26-14 (Superseded by MIL-C-22520/5C)
• MS-90455 - Installing Tool, Electrical Connector Contact (Superseded by MIL-I-81969/17)
• MS-90456 - Removal Tool, Electrical Connector Contact (Superseded by MIL-I-81969/19)
• MS-90487 - Tool, Crimp, Hand, for Ms18265 and m518266 Shielded Contacts (Use MIL-C-22520/5)
• MS-90562 - Removal Tool, Electrical Connector Contact (Class l) (Superseded by MIL-I-81969/27)
• MSD-15128 - Pliers, Type Q; Classification of Defects (Use SCDS-42)
• NAS-1090 - Hook, Chain, S
• NAS-1837 - Installation Tab and Alignment Tool for NAS1832, NAS1833, NAS1834, NAS1835, and NAS1836 Molded in Inserts
• NAS-4001 - Bit, Screwdriver, TRI-Lont, Specification For
• NAS-4005 - Bit, Screwdriver, TRI-Slot Recess
• NAS-7101 - Bit, Screwdriver, Cruciform, Specification For
• NASM-85643 - Bits, Screwdriver, Ribbed, General Specification For
• NASM-85643/1 - Bit, Screwdriver, Ribbed, Cruciform, Insert Type, External Hexagon Shank, Manually Driven
• NASM-85643/2 - Bit, Screwdriver, Ribbed, Cruciform, Long Shank, External Hexagon Shank, Power Driven
• NASM-85643/3 - Bit, Screwdriver, Ribbed, Offset Cruciform, External Hexagon Shank, Power Driven
• NASM-85643/4 - Bit, Screwdriver, Ribbed, Offset Cruciform, Long Shank, External Hexagon Shank
• NASM-85643/5 - Bit, Screwdriver, Insert Type, Ribbed, Offset Cruciform, External Hexagon Shank, Manua
• NN-H-81 - Handels, Ash
• NN-H-93 - Handles: Hickory, Striking Tool
• QPL-16567 - Grip, Cable
• QPL-17912 - Wrench, Open-End Adjustable, and Wrench, Monkey, Nonsparking and Nonmagnetic
• QPL-18745 - Hammer, Hand, Nonsparking and Nonmagnetic
• QPL-19762 - Wrench, Pipe, Nonsparking and Nonmagnetic (No Superseding Document)
• QPL-19928 - Wrench, Box, and Open-End, Fixed, Nonsparking and Nonmagnetic (No Superseding Document)
• QPL-20206 - Blowtorch Oil, Portable
• QPL-21111 - Screwdriver, Flat Tip, Offset, and Crosstrip Nonsparking and Nonmagnetic (No Superseding Document)
• QPL-21120 - Key, Socket Head Screw, Hexagon, Nonsparking and Nonmagnetic (No Superseding Document)
• QPL-22520 - Crimping Tools, Wire Termination, General Specification for
• QPL-22520/1 - Crimping Tools, Contact, Electric, Hand General Specification for (Use Qpl 22520-16)
• QPL-22520/10 - Crimping Tool, Contact, Electric, Hand General Specification for (Use Qpl 22520-16)
• QPL-22520/2 - Crimping Tools, Contact, Electric, Hand, General Specification for (Superseded by QPL-22520)
• QPL-22520/3 - Crimping Tools, Contact, Electric, Hand General Specification for (Use Qpl 22520-16)
• QPL-22520/4 - Crimping Tools, Terminal, Hand, Wire Termination General Specification for (Superseded by QPL-22520)
• QPL-22520/5 - Crimping Tool, Contact, Electric, Hand General Specification for (Use Qpl 22520-16)
• QPL-22520/6 - Crimping Tools, Contact, Electric, Hand General Specification for (Use Qpl 22520-16)
• QPL-22520/7 - Crimping Tools, Terminal, Hand, Wire Termination General Specification For
• QPL-22910 - Tool, Crimping, Hand, for Crimp Style Electric Terminal and Shield Ferrule (No Superseding Document)
• QPL-23514 - Wrench, Spanner, Adjustable Hook, Nonsparking and Nonmagnetic (No Superseding Document)
• QPL-55619 - Tool, Crimping, for Coaxial, Radio-Frequency, Connectors General Specification for (No Superseding Document)
• QPL-81306 - Tool, Forming, for Adjustable Plastic and Metal Cable Straps (Superseded by QPL-AS81306)
• QPL-81969 - Installing and Removal Tools, Connector Electrical Contact, General Specification for
• QPL-83724 - Tool, Crimping, Contact, Electric Connector
• QPL-AS-5259 - Tool and Accessories,Electrical, Size 8 to 700 KCMIL, General Purpose Use, Die and Dieless, Crimping
• QPL-AS-81306 - Wiring Installation Tools for Bands and Tiedown Straps
• QPL-AS-81969 - Installing and Removal Tools, Connector Electrical Contact, General Specification for
• QPL-GGG-B-550 - Blowtorches, Alcohol and Gasoline, Hand
• QPL-GGG-W-642 - Wrench, Bung, (Nonsparking and Nonmagnetic)
• QPL-GGG-W-686 - Wrenches, Torque
• QQ-T-40 - Tape, Fish, Steel (for Electricians Use) (Cancelled, 1974, Use GGG-T-1310)
• QQ-W-348 - Wire, Fish (for Electricians & Plumbers Use) (Cancelled, 1964, Superseded By QQ-T-40 & GGG-A-
• RR-G-691 - Grip, Cable Jaw
• RR-G-700 - Grip, Wire, Strand, Wire Rope & Cable (Cancelled, 1994, No S/S Document)
• RR-H-571 - Hook, Chain (Cancelled, 1987, No S/S Document)
• RR-P-586 - Pot, Melting, (Nonelectric, Solder Style) (Cancelled, 1994,No S/S Document)
• SS-EN-1299 - Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
• W-G-441 - Gluepots, Electric (Portable, Dry & Wet)
• W-P-796 - Puller, Fuse
• ZZ-F-566 - Force Cup, Plumbers
• ZZ-F-570 - Force Cups, Plumber S (Ball Shaped) +Cancelled, 1964, No S/Sdocument+