FSC 5975: Electrical Hardware and Supplies
The following documents are a part of this series:- A-A-50552 - Fittings for Cable, Power, Electrical and Conduit, Metal, Flexible
- A-A-50553 - Fitting for Conduit, Metal (Thick-Wall (Rigid) and Thin-Wall (EMT) Type)
- A-A-50563 - Conduit Outlet Boxes, Bodies, and Entrance Caps, Electrical: Cast Metal
- A-A-52440 - Conduit, Metal, Flexible: Electrical Shielded
- A-A-55804 - Rods, Ground (with Attachments)
- A-A-55810 - Conduit, Metal, Flexible
- A-A-59178 - Nipple, Electrical Terminal
- A-A-59214 - Junction Box: Extension, Junction Box; Cover, Junction Box (Steel, Coated with Corrosion-Resistant Finish)
- A-A-59827 - Topside Conduit (Flexible) and Conduit Fittings, Electrical: Composite Based (Non-Metallic)
- AMS-T-81914 - Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification For
- AMS-T-81914/4 - Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolu
- AMS-T-81914/5 - Tubing, Plastic, Extra Flexible, Convoluted, Ethylene-Tetrafluoroethyene, Close Convolutio
- AMS-T-81914/7 - Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylenepropylene, Integral Braid
- AN-2553 - Plug - Fuel Nozzle Grounding (Superseded by ms-25384)
- AN-3048 - Ferrule-Conduit, Flexible, One Step, Synthetic Covered
- AN-3050 - Ferrule and Conduit, Flexible
- AN-3051 - Ferrule and Conduit, Flexible, One Step
- AN-3052 - Ferrule and Conduit, Flexible, One Step
- AN-3053 - Ferrule and Rigid Conduit
- AN-3054 - Nut, Coupling, Electrical Conduit
- AN-3055 - Box, Connector, Electrical
- AN-3056 - Adapter, Electrical Conduit, Rigid to Flexible
- AN-3058 - Coupling, Electrical Conduit, Rigid
- AN-3059 - Bushing - Electrical Conduit (Cancelled, 1989, No Superseding Document)
- AN-3060 - Elbow - Electrical Conduit, 45 Degrees
- AN-3061 - Elbow - Electrical Conduit, 45 Degrees Junction Box
- AN-3062 - Elbow - Electrical Conduit, 90 Degrees
- AN-3063 - Elbow - Electrical Conduit, 90 Degrees Junction Box
- AN-3064 - Box Connector, Electrical
- AN-3068 - Coupling - Electrical Conduit
- AN-3069 - Adapter Assembly - 3/16 Inch Conduit
- AN-3083 - Ferrule - Conduit, Flexible, Two Step, Synthetic Covered
- AN-3104 - Elbow - Shielded Spark Plug (Use MIL-E-6719)
- AN-3111 - Ring - Bonding, Electrical Connector
- AN-3250 - Coupling and Conduit Y
- AN-3420 - Bushing - Cable Adapter, Telescoping (Superseded by ms-3420)
- AN-4028 - Marker - Ignition Cable (Supersedes Usaf Specification 28123 and an-9513)
- AN-6046 - Bracket - Mounting, Extinguisher, Fire
- AND-10391 - Conduit Assembly-Flexible Metallic +Cancelled, 1989, No S/Sdocument+
- ANSI-C135.30 - For Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction
- ANSI-C80.5 - Electrical Rigid Metal Conduit - Aluminum (ERMC-A)
- AS-10051 - Hubs, Conduit Connection, Standard Dimensions
- AS-10380 - Coupling Installations, Standard Conduit, Electrical
- AS-23190/2 - Straps, Clamps, Plastic and Metal, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Class 1
- AS-23190/3 - Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support Strap, Tie Down, Adjustable, Corrosion Resistant Steel, Type VI, Class 1
- AS-23190-A1 - Straps, Clamps, & Mounting Hardware, Plastic & Metal for Cable Harness Tying & Support
- AS-25064 - Conduit, Flexible, Radio Frequency Shielding
- AS-25065 - Ferrule, Flexible Conduit, Radio Frequency Shielding
- AS-25067 - Conduit Assembly, Flexible, Radio Frequency Shielding
- AS-33391 - Plate, Mounting, Plastic for Use With MS3367 Plastic Tiedown Straps
- AS-33401 - Bulkhead Bracket for Use With Ms3367 Plastic Tiedown Straps
- AS-33411 - Bracket, Mounting, Plastic for Use With Ms3367 Plastic Tiedown Straps
- AS-33671 - Strap, Tiedown, Electrical Components, Adjustable, Self-Clinching, Plastic, Type I, Class 1
- AS-6136 - Conduit, Electrical, Flexible, Shielded, Aluminum Alloy Foraircraft Installations
- AS-81914 - Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification For
- CEA-310 - Cabinets, Racks, Panels, and Associated Equipment
- CSA-ISO/IEC-8802-5 - Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 5: Token Ring Access Method and Physical Layer Specifications (Adopted ISO/IEC 8802-5:1998 / ANSI/IEEE 802.5:1998, third edition, 1998-09-15)
- DOD-STD-1399-532 - Cooling Water for Support of Electronic Equipment
- EIA-310 - Cabinets, Racks, Panels, and Associated Equipment
- FED-STD-128 - Junction Box, Extension, Junction Box, Cover, Junction Box,(Steel, Cadmium or Zinc Co
- FED-STD-156 - Fitting for Conduit Metal-Rigid, (Thick Wall and Thin Wall (Emt) Type)+Can'd, No S/S D
- FED-STD-157 - Fitting for Electrical Cable and Flexible Metal Conduit+Can-Celed, No S/S Document+
- HH-T-791 - Tube, Flexible, Nonmetallic, Electrical
- L-C-740 - Conduit and Fittings, Plastic +Cancelled, S/Sby W-C-1094
- MIL-A-2304 - Adapter-Scanning, Visual 400 Kilocycle Input
- MIL-B-10256 - Bridle Rings PF-73, PF-74, PF-75 and PF-76
- MIL-B-19622/5 - Body, Straight, Nylon Stuffing Tube
- MIL-B-19622/6 - Stuffing Tube, Nylon: Body, 90 Degrees (No Superseding Document)
- MIL-B-19622/7 - Body, Npt, Nylon Stuffing Tube
- MIL-B-19622/8 - Body, Nylon Stuffing Tube, Y Type
- MIL-C-13909 - Conduit, Metal, Flexible: Electrical Shielded (Superseded by A-A-52440)
- MIL-C-172 - Cases; Bases, Mounting; and Mounts, Vibration (for Use With Electronic Equipment in Aircraft)
- MIL-C-17277 - Clamp, Electric Cable (for Lighting Fixtures, Fittings and Enclosures Except Watertight) (Shipboard Use) (Use W-F-406)
- MIL-C-19779 - Control Box, Junction (for Torpedo Mark 27 Mod 4)
- MIL-C-23280 - Cabinet, Electrical Equipment, CY-2675 (No Superseding Document)
- MIL-C-23571 - Conduit and Conduit Fittings, Plastic, Rigid (Superseded by W-C-1094)
- MIL-C-23749 - Conduits, Vitrified Clay (No Superseding Document)
- MIL-C-24056 - Cabinet, Electronic Equipment, CY-4516(a)/S & CY-4516(B)/S (Single Bay) (Naval Shipboard Use) (Superseded by MIL-C-28872)
- MIL-C-24758 - Conduit, Flexible, Weatherproof, & Associated Fittings, General Specification For
- MIL-C-24758/1 - Conduit, Flexible, Weatherproof (Superseded by MIL-PRF-24758)
- MIL-C-24758/10 - Conduit, Flexible, Weatherproof, Adapter for Triaxial Connectors (Superseded by MIL-PRF-24758)
- MIL-C-24758/11 - Conduit, Flexible, Weatherproof, Adapter for Coaxial Connectors (Superseded by MIL-PRF-24758)
- MIL-C-24758/12 - Conduit, Flexible, Weatherproof, Adapter for MIL-C-26482 Connectors (Superseded by MIL-PRF-24758)
- MIL-C-24758/13 - Conduit, Flexible, Weatherproof, Adapter for Ms3155-Type Connectors (Superseded by MIL-PRF-24758)
- MIL-C-24758/14 - Conduit, Flexible, Weatherproof, Adapter for MIL-C-28840 (EC) Backshells (Superseded by MIL-PRF-24758)
- MIL-C-24758/15 - Conduit, Flexible, Weatherproof, Adapter for MIL-S-24235 Stuffing Tubes (Superseded by MIL-PRF-24758)
- MIL-C-24758/16 - Conduit, Flexible, Weatherproof, Adapter for Miscellaneous Threaded Fittings (Superseded by MIL-PRF-24758)
- MIL-C-24758/17 - Conduit, Flexible, Weatherproof, Adapter for Pipe Thread (Tapered) (Superseded by MIL-PRF-24758)
- MIL-C-24758/18 - Conduit, Flexible, Weatherproof, Adapter for Pipe Thread (Straight) (Superseded by MIL-PRF-24758)
- MIL-C-24758/19 - Conduit, Flexible, Weatherproof, Adapter for Panel Termination (Superseded by MIL-PRF-24758)
- MIL-C-24758/2 - Conduit, Flexible, Weatherproof, Straight Conduit Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/3 - Conduit, Flexible, Weatherproof, 45 Degree Conduit Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/4 - Conduit, Flexible, Weatherproof, 90 Degree Conduit Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/5 - Conduit, Flexible, Weatherproof, Conduit-To-Panel Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/6 - Conduit, Flexible, Weatherproof, Conduit-To-Pipe Externally Threaded (Tapered) Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/7 - Conduit, Flexible, Weatherproof, Conduit-To-Stuffing Tube (MIL-S-24235) Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/8 - Conduit, Flexible, Weatherproof, Conduit-To-Conduit Fitting (Superseded by MIL-PRF-24758)
- MIL-C-24758/9 - Conduit, Flexible, Weatherproof, Adapter for MIL-C-5015 Connectors (Superseded by MIL-PRF-24758)
- MIL-C-2798 - Caps, Attachment-Plug, Separable, for Connection To Flexible Electrical Conductors (Use W-C-596)
- MIL-C-28794 - Cabinet, Electronic Equipment (Single Bay)
- MIL-C-28872 - Cabinet, Electronic Equipment CY-4516C/S () (No Superseding Document)
- MIL-C-29169 - Conduit, and Conduit Fittings, Metal, Rigid, Polyvinyl Chloride (Pvc) Coated (Superseded by UL 6 and UL514a)
- MIL-C-46867 - Compound, Caulking, Conductive (No Superseding Document)
- MIL-C-55172 - Cabinet, Electrical Equipment,CY-3397( )/g (No Superseding Document)
- MIL-C-5620 - Control Box, C-157/Ap (for Use With as-168/Ap Antenna-Rectifier)
- MIL-C-6136 - Conduit: Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations (Use SAE-as6136)
- MIL-C-6783 - Clamp, Battery Hold Down (No Superseding Document)
- MIL-C-7452 - Cases, Electronic, for Equipment Rack System in Aircraft, General Specification
- MIL-C-7763 - Clamp - Strap Type, Electric Wire
- MIL-C-7931 - Condiut, Electrical, Flexible, Radio Frequency Shielding, for Aircraft Installations
- MIL-C-82079 - Clamp, Electrical, Nonconductive (Use MIL-H-55053)
- MIL-C-82597 - Compound, Electrically Conductive
- MIL-DTL-24705 - Penetrators, Multiple Cable, Electric Cable, General Specification for
- MIL-DTL-24705/1 - Penetrators, Multiple Cable, Electric Cable, Rectangular Metal Frame, Square-Faced Blocks
- MIL-DTL-24705/3 - Penetrators, Multiple Cable, Electric Cables, Round Frame, Square-Faced Blocks
- MIL-DTL-24705/4 - Penetrators, Multiple Cable, Compact Rectangular Metal Frame and Blocks, Electrical and Fiber Optic Cable
- MIL-DTL-24749 - Grounding Straps and Bosses, Electromagnetic
- MIL-DTL-32376 - Ring - Bonding, Electrical Connector
- MIL-DTL-32554 - Straps, Tie-Down, Adjustable, Non-Metallic, Cable Bundling, General Specification for
- MIL-DTL-32656 - Arc Fault Protection System, General Specification for
- MIL-DTL-32656/1 - Arc Fault Protection System, Photosenor
- MIL-E-24142 - Enclosure for Electrical Fittings and Fixtures, General Specification For
- MIL-E-24142/1 - Enclosure for Electrical Fittings and Fixtures, Submersible, Size 4 by 4 (15-Foot)
- MIL-E-24142/10 - Enclosure for Electrical Fittings and Fixtures Submersible (15-Foot), Size 2-1/8 by 4-1/2
- MIL-E-24142/11 - Enclosures-Plastic, Submersible, (15-Foot) 3 and 4 - Inches Round, Grounde D
- MIL-E-24142/12 - Enclosures-Plastic, Submersible, (15-Foot) 3-Inches Round, Grounded (No Superseding Document)
- MIL-E-24142/13 - Enclosure-Plastic, Submersible, (15-Foot) 4-Inches Round, Grounded (No Superseding Document)
- MIL-E-24142/14 - Enclosure, Single Cover, Sizes 10 by 10 Through 12 by 12, Totally Enclosed, Nonwatertight
- MIL-E-24142/15 - Enclosure, With Fuse Cover, Sizes 10 by 10 Through 12 by 12, Totally Enclosed, Nonwatertight
- MIL-E-24142/16 - Enclosure, Single Cover, Sizes 10 by 14 Through 12 by 20, Totally Enclosed, Nonwatertight
- MIL-E-24142/17 - Enclosure With Fuse Cover, Sizes 10 by 14 Through 12 by 20, Totally Enclosed, Nonwatertight
- MIL-E-24142/18 - Enclosures, Single Cover, Sizes 10 by 20 Through 18 by 22, Totally Enclosed, Nonwatertight
- MIL-E-24142/19 - Enclosure, With Fuse Cover, Size 10 by 20 Through 12 by 22, Totally Enclosed, Nonwatertight
- MIL-E-24142/2 - Enclosure for Electrical Fittings and Fixtures, Submersible (15-Foot), Size 3 by 5
- MIL-E-24142/20 - Enclosures, with Fuse Cover, Size 10 by 20, through 12 by 22, Totally Enclosed, Nonwatertight
- MIL-E-24142/3 - Enclosure for Electrical Fittings and Fixtures, Submersible, Size 6 by 9 (15-Foot)
- MIL-E-24142/4 - Enclosure, Submersible (15-Foot) Size 4 by 7
- MIL-E-24142/5 - Enclosure for Electrical Fittings and Fixtures, Submersible, (15-Foot), Sizes 3R, 4R and 5R
- MIL-E-24142/6 - Enclosure, Submersible (15-Foot), Sizes 8 by 10 and through 14 by 26
- MIL-E-24142/7 - Enclosures, Submersible (15-Foot), Size 20 by 24
- MIL-E-24142/8 - Enclosure, Totally Enclosed, Size 2-1/4 by 2-7/8 (Octagon), Nonwatertight
- MIL-E-24142/9 - Enclosure for Electrical Fittings and Fixtures, Submersible (15-Foot), Size 2-1/8 by 3
- MIL-E-24743 - Enclosure, Common Electronic Equipment, General Specification for (No Superseding Document)
- MIL-E-85726 - Enclosure, Standard Avionics, Forced Air Cooled, General Spec For
- MIL-F-24235/15 - Fitter for Stuffing Tubes
- MIL-F-28675 - Fittings, Conduit, Explosion Proof (Couplings, Seals, Unions, Elbows) (No Superseding Document)
- MIL-H-19320 - Hooks, Guy, Hangers, Cable, and Steps, Pole (Use MIL-H-55053 or MIL-S-3960)
- MIL-H-19352 - Hanger, Cable (No Superseding Document)
- MIL-H-21367/1 - Hull Fitting, Stuffing Tube, Type Mx8208/U for Flexible, Solid Dielectric, Radio Frequency Cable
- MIL-H-21367/10 - Hull Fitting, Stuffing Tube, Type Mx2327/U (Long Body), for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/11 - Hull Fitting, Stuffing Tube, Type Mx2326/U for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/12 - Hull Fitting, Stuffing Tube, Type Mx2326/U (Long Body) for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/13 - Hull Fitting, Stuffing Tube, Type Mx2646/U for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/14 - Hull Fitting, Stuffing Tube, Type Mx2646/U (Long Body), for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/17 - Hull Fitting, Blanking Plugs for Stuffing Tubes Mx2326/U, Ms2327/U, and Mx2646/U, for Flexible Solid-Dielectric Radio-Frequency Cable
- MIL-H-21367/18 - Hull Fitting, Blanking Plugs for Stuffing Tube Mx7637/U for Flexible, Solid-Dielectric Radio-Frequency Cable
- MIL-H-21367/2 - Hull Fitting, Stuffing Tube, Type Mx8209/U for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/3 - Hull Fitting, Stuffing Tube, Type Mx8210/U for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/4 - Hull Fitting, Stuffing Tube, Type Mx8211/U, for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/5 - Hull Fitting, Stuffing Tube, Type Mx8212/U, for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/6 - Hull Fitting, Stuffing Tube, Type Mx8213/U, for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/7 - Hull Fitting, Stuffing Tube, Type Mx7637/U for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/8 - Hull Fittings, Stuffing Tube, Type Mx7637/U, Long Body, for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-21367/9 - Hull Fittings, Stuffing Tube, Type Mx2327/U for Flexible, Solid-Dielectric, Radio-Frequency Cable
- MIL-H-55053 - Hardware, Pole Line (No Superseding Document)
- MIL-I-24728/2 - Interconnection Box, Fiber Optic, Submersible, 308.4 X 609.6 Mm
- MIL-I-24728/3 - Interconnection Box, Fiber Optic, Submersible, 406.4 X 863.6 Mm
- MIL-I-24728/4 - Interconnection Box, Fiber Optic, Submersible, 101.6 X 177.8 MM
- MIL-I-24728/5 - Interconnection Box, Fiber OPtic, Submersible, 152.4 X 228.6 MM
- MIL-I-24728/6 - Interconnection Box, Fiber Optic, Connector Patch Panel Module
- MIL-I-24728/7 - Interconnection Box, Fiber Optic, Splice Tray Holder Module
- MIL-J-19416 - Junction Box Mark 41 Mod 0
- MIL-J-21978 - Junction Boxes, Surface, Cabinet Type, Hinged Cover (Superseded by UL-50)
- MIL-J-23013 - Junction Box Jeu-25 (*)/a (No Superseding Document)
- MIL-J-24142/6 - Junction Box, Submersible (15 Foot), Sizes 8 by 10 Through 14 by 26
- MIL-J-5094 - Junction Boxes, Power (P-3 Compass)
- MIL-L-12293 - Light, Extension
- MIL-L-19622/15 - Locknut, Nylon Stuffing Tube 90 Deg.
- MIL-M-24728/4 - Interconnection Box, Fiber Optic, Submersible, 101.6 X 177.8 MM
- MIL-N-6748 - Nipple, Electrical Terminal (No Superseding Document)
- MIL-O-23641 - Outlet, Shore Power (No Superseding Document)
- MIL-P-24705 - Penetrators, Multiple Cable, for Electric Cables, General Specification for
- MIL-P-24705/1 - Penetrators, Multiple Cable, for Electrical Cables, Rectangular Metal Frame, for Square
- MIL-P-24705/2 - Penetrators, Multiple Cable, for Electrical Cables, Notched Rectangular Metal Frame, F
- MIL-P-24705/3 - Penetrators, Multiple Cable, for Electric Cables, Round Frame, for Square-Faced Blocks
- MIL-PRF-24758 - Conduit Systems, Flexible, Weatherproof
- MIL-PRF-85725 - Rack, Integrated Avionics, Forced Air Cooled, General Specification for
- MIL-PRF-85726 - Enclosure, Standard Avionics, Forced Air-Cooled, Specification for
- MIL-R-10964 - Racks, Electrical Equipment (Rack MT-452( )/F and Rack MT-453( )/F) (No Superseding Document)
- MIL-R-11461 - Rod, Ground (With Attachments) (Superseded by W-R-550)
- MIL-R-12537 - Rack, Electrical Equipment MT-1278( )/U (No Superseding Document)
- MIL-R-12644 - Rod, Ground, MX-148/g, General Specification for (Use W-R-550a)
- MIL-R-18292 - Rack, Electrical Equipment, MT-1589/GRC-27a
- MIL-R-24006 - Rods, Ground, Copper-Clad Steel, Galvanized Steel, and Copper (Use W-R-550)
- MIL-R-46837 - Raceways, Steel, Rigid
- MIL-R-7453 - Rack Structure, Electronic, for Equipment Rack System in Aircraft, General Specification
- MIL-R-85725 - Rack, Integrated Avionics, Forced Air Cooled, General Specification For
- MIL-S-19622 - Stuffing Tubes, Nylon; and Packing Assemblies; General Specification For
- MIL-S-19622/1 - Stuffing Tubes, Straight, Nylon
- MIL-S-19622/10 - Stuffing Tube, Nylon: Cap (No Superseding Document)
- MIL-S-19622/11 - Stuffing Tube, Nylon: Washer, Nonmetallic Slip (No Superseding Document)
- MIL-S-19622/12 - Stuffing Tube, Nylon: Washer, Nonmetallic Retainer (No Superseding Document)
- MIL-S-19622/13 - Stuffing Tube, Nylon: Bushing, Neoprene (No Superseding Document)
- MIL-S-19622/14 - Stuffing Tube, Nylon: Plug, Neoprene
- MIL-S-19622/15 - Stuffing Tube, Nylon: Locknut, 90 Degrees (No Superseding Document)
- MIL-S-19622/2 - Stuffing Tubes, 90 Degrees, Nylon
- MIL-S-19622/3 - Stuffing Tubes, Npt, Nylon
- MIL-S-19622/4 - Stuffing Tubes, 'Y'-Type Nylon
- MIL-S-19622/5 - Stuffing Tube, Nylon: Body, Straight (No Superseding Document)
- MIL-S-19622/6 - Stuffing Tube, Nylon: Body, 90 Degrees (No Superseding Document)
- MIL-S-19622/7 - Stuffing Tube, Nylon: Body, Npt (No Superseding Document)
- MIL-S-19622/8 - Stuffing Tube, Nylon: Body, 'Y' Type (No Superseding Document)
- MIL-S-19622/9 - Stuffing Tube, Nylon: Locknut, Straight Body (No Superseding Document)
- MIL-S-21953 - Sealing Kit for Preservation of Ends of Disconnected Cables (No Superseding Document)
- MIL-S-2244 - Sleeve, Wire Splicing, Single Tube, General Specification for (No Superseding Document)
- MIL-S-23190 - Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support (Superseded by SAE as-23190)
- MIL-S-23190/2 - Straps, Clamps, Plastic and Metal, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Class 1 (Superseded by SAE as-23190/2)
- MIL-S-23190/3 - Strap, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support Strap, Tie Down, Adjustable, Corrosion Resistant Steel Type VI, Class 1 (Superseded by SAE as-23190/3)
- MIL-S-24235 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, General Specification For
- MIL-S-24235/1 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Bulkhead, Pressureproof
- MIL-S-24235/10 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Steel, for Decks and Bulkheads Without Pipe Protection
- MIL-S-24235/11 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Outlet, Weather Deck, Nonmagnetic
- MIL-S-24235/12 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Split
- MIL-S-24235/13 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, for Cast Enclosures
- MIL-S-24235/14 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, for Sheet Metal Enclosures
- MIL-S-24235/15 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Fitters For
- MIL-S-24235/16 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Cable, Shearing Valve, Hull, Pressureproof, Symbols 512, 512.1, 513, and 513.1
- MIL-S-24235/17 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Swage Type, Steel and Aluminum, for Deck and Bulkheads With Pipe Protection
- MIL-S-24235/18 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Swage Type, Reduced Diameter, Steel and Aluminum, for Deck and Bulkheads With Pipe Protection
- MIL-S-24235/19 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Sealing Plug for Unused Stuffing Tubes
- MIL-S-24235/2 - Stuffing Tube, Packing Assemblies for Pressureproof Bulkhead
- MIL-S-24235/3 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Bulkhead, for Ballast Tanks
- MIL-S-24235/4 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Packing Assemblies for Bulkhead (Ballast Tanks)
- MIL-S-24235/5 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Ballast Tank
- MIL-S-24235/6 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Packing Assemblies for Ballast Tank
- MIL-S-24235/7 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, for Cast Enclosures, Pressureproof
- MIL-S-24235/8 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, for Sheet Metal Enclosures, Pressureproof
- MIL-S-24235/9 - Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, Brass and Steel, for Decks and Bulkheads With Pipe Protection
- MIL-S-24235/COMPLETE - Complete Set of Slash Sheets
- MIL-S-24700 - Stuffing Tubes for Reference Electrodes, Impressed Current Cathodic Protection (Metric) (No Superseding Document)
- MIL-S-24749 - Straps, Electrical Grounding (Metric)
- MIL-S-24759 - Straps, Electrical Grounding (Metric), General Specification For
- MIL-S-55094 - Stake, Guy and Other Hardware for Antenna Masts (No Superseding Document)
- MIL-STD-189 - RACK, ELECTRICAL EQUIPMENT 19 INCH and ASSOCIATED EQUIPMENT (SEE NOTICE 3 FOR REPLACEMENT INFORMATION)
- MIL-STD-2200 - Requirements for Employing Standard Enclosure Systems (No Superseding Document)
- MIL-T-81914 - Tubing, Plastic, Flexible, Convoluted, Conduit General Specification For (Use SAE AMS--T-81914)
- MIL-T-81914/1 - Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions (Future Design Should Refer To SAE AMS-T-81914/1)
- MIL-T-81914/2 - Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene Close Convolution (Future Design Should Refer To SAE AMS-T-81914/2)
- MIL-T-81914/3 - Tubing, Plastic, Flexible, Convouted, Fluorinated Ethylene Propylene, Standard Convolution (Future Design Should Refer To SAE AMS-T-81914/3)
- MIL-T-81914/4 - Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution (Superseded by SAE AMS-T-81914/4)
- MIL-T-81914/5 - Tubing, Plastic, Extra Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Close Convolution (Superseded by SAE AMS-T-81914/5)
- MIL-T-81914/6 - Tubing, Plastic, Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Standard Convolution (Future Design Should Refer To SAE AMS-T-81914/6)
- MIL-T-81914/7 - Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Integral Braid (Future Design Should Refer To SAE AMS--T-81914/7)
- MIL-T-81914/COMPLETE - Complete Set of Current Slash Sheets for MIL-T-81914
- MIL-W-21621 - Wiring Fixtures for Electrical and Electronic Equipment (No Superseding Document)
- MS-14125 - Rack, Vertical
- MS-14126 - Rack, Turret Projected Top (No Superseding Document)
- MS-14127 - Door, Face Mounted
- MS-14128 - Door, Flush Mounted
- MS-14129 - Panel, Plush Mounted
- MS-14130 - Writing Desk
- MS-14131 - Writing Desk Components
- MS-14132 - Panel Textolite
- MS-14133 - Drawer, Sliding
- MS-14134 - Slide Assembly, Equipment
- MS-14135 - Drawer Assembly, Rack Mounting
- MS-14136 - Handle
- MS-14137 - Angle, Mounting
- MS-14138 - Shelf
- MS-14139 - Knee Protector
- MS-14140 - Plate-Rack
- MS-16155 - Stuffing Tube, Nylon, Size 1 (No Superseding Document)
- MS-16156 - Stuffing Tube, Nylon, Size 2 (No Superseding Document)
- MS-16157 - Stuffing Tube, Nylon, Size 4T (No Superseding Document)
- MS-16158 - Stuffing Tube, Nylon, Size 5 (No Superseding Document)
- MS-16159 - Stuffing Tube, Nylon, Size 6 (No Superseding Document)
- MS-16160 - Stuffing Tube, Nylon, Size 7 (No Superseding Document)
- MS-16161 - Stuffing Tube, Nylon, Size 8 (No Superseding Document)
- MS-16162 - Stuffing Tube, Nylon, Size 9 (No Superseding Document)
- MS-16163 - Stuffing Tube, Nylon, 90 Degree, Size 1 (No Superseding Document)
- MS-16164 - Stuffing Tube, Nylon, 90 Degree, Size 2 (No Superseding Document)
- MS-16165 - Stuffing Tube, Nylon, 90 Degree, Size 4T (No Superseding Document)
- MS-16166 - Stuffing Tube, Nylon, 90 Degree, Size 5 (No Superseding Document)
- MS-16167 - Stuffing Tube, Nylon, 90 Degree, Size 6 (No Superseding Document)
- MS-16168 - Body, Nylon Stuffing Tube (Superseded by MIL-S-19622/5)
- MS-16169 - Locknut, Nylon Stuffing Tube (Superseded by MIL-S-19622/9)
- MS-16170 - Cap, Nylon Stuffing Tube
- MS-16173 - Plug, Neoprene, Nylon Stuffing Tube (No Superseding Document)
- MS-16174 - Bushing, Neoprene, Nylon Stuffing Tube
- MS-16175 - Body, Nylon Stuffing Tube, 90 Deg.
- MS-16176 - Locknut, Nylon Stuffing Tube, 90 Deg.
- MS-16177 - Packing Assemblies for Nylon Stuffing Tube, Size 1 (Superseded by MIL-S-19622/16)
- MS-16178 - Packing Assemblies for Nylon Stuffing Tube, Size 2 (No Superseding Document)
- MS-16179 - Packing Assemblies for Nylon Stuffing Tube, Size 4 and 4T (Superseded by MIL-S-19622/19)
- MS-16189 - Packing Assemblies for Nylon Stuffing Tube, Size 5 (Superseded by MIL-S-19622/20)
- MS-16190 - Packing Assemblies for Nylon Stuffing Tube, Size 6 (Superseded by MIL-S-19622/21)
- MS-16191 - Packing Assemblies for Nylon Stuffing Tube, Size 7 (Superseded by MIL-S-19622/22)
- MS-16192 - Packing Assemblies for Nylon Stuffing Tube, Size 8 (Superseded by MIL-S-19622/23)
- MS-16193 - Packing Assemblies for Nylon Stuffing Tube, Size 9 (Superseded by MIL-S-19622/24)
- MS-17013 - Terminal, Electric (Hermetic Seal), Single Conductor, Awg 14/1 (No Superseding Document)
- MS-17014 - Sleeve for Electric Terminals (Hermetic Seal) (No Superseding Document)
- MS-17015 - Tube for Electric Terminal (Hermetic Seal) (No Superseding Document)
- MS-17016 - Bushings for Electric Terminals (Hermetic Seal) (No Superseding Document)
- MS-17017 - Terminal, Electric (Hermetic Seal), Single Conductor, Awg 10/1 (No Superseding Document)
- MS-17018 - Terminal, Electric (Hermetic Seal), Single Conductor, Awg 4/0 (No Superseding Document)
- MS-17019 - Terminal, Electric (Hermetic Seal), Tubular Heater, 1000-Volt (No Superseding Document)
- MS-17020 - Terminal, Electric (Hermetic Seal), 2-Conductor, Awg 14/2 (No Superseding Document)
- MS-17021 - Adapters for Electric Terminals (Hermetic Seal) (No Superseding Document)
- MS-17022 - Terminal, Electric (Hermetic Seal), 3-Conductor Awg 14/3 (No Superseding Document)
- MS-17023 - Terminal, Electric (Hermetic Seal), 4-Conductor, Awg 14/4 (No Superseding Document)
- MS-17024 - Terminal, Electric (Hermetic Seal), 7-Conductor, Awg 14/7 (No Superseding Document)
- MS-17025 - Terminal, Electric (Hermetic Seal), 2-Conductor, Awg 8/2 (No Superseding Document)
- MS-17026 - Fitter Assembly for Electrical Terminal (Hermetic Seal), Size Awg 14/1 (No Superseding Document)
- MS-17027 - Fitter Assembly for Electrical Terminal (Hermetic Seal), Size Awg 10/1 (No Superseding Document)
- MS-17028 - Fitter Assembly for Electric Terminal (Hermetic Seal), Size Awg 4/0 (No Superseding Document)
- MS-17029 - Fitter Assembly for Electric Terminal (Hermetic Seal), Size Awg 14/2 (No Superseding Document)
- MS-17030 - Fitter Assembly for Electric Terminal (Hermetic Seal), Awg 14/3 (No Superseding Document)
- MS-17031 - Fitter Assembly for Electric Terminal (Hermetic Seal), Size Awg 14/4 (No Superseding Document)
- MS-17032 - Fitter Assembly for Electric Terminal (Hermetic Seal), Size Awg 14/7 (No Superseding Document)
- MS-17033 - Fitter Assembly for Electric Terminal (Hermetic Seal), Size Awg 8/2 (No Superseding Document)
- MS-17034 - Fitters for Single Conductor Electric Terminal (Hermetic Seal) Fitter Assemblies (No Superseding Document)
- MS-17035 - Fitters for Multiple Conductor Electric Terminal (Hermetic Seal) Fitter Assemblies (No Superseding Document)
- MS-17036 - Gland Nuts for Electric Terminal (Hermetic Seal) Fitter Assemblies (No Superseding Document)
- MS-17037 - Ferrule for Electric Terminal (Hermetic Seal) Fitter Assemblies (No Superseding Document)
- MS-17039 - Stuffing Tube, Npt, Nylon, Size 1 (No Superseding Document)
- MS-17040 - Stuffing Tube, Npt, Nylon, Size 2 (No Superseding Document)
- MS-17041 - Stuffing Tube, Npt, Nylon, Size 4T (No Superseding Document)
- MS-17042 - Stuffing Tube, Npt, Nylon, Size 5 (No Superseding Document)
- MS-17043 - Stuffing Tube, Npt, Nylon, Size 6 (No Superseding Document)
- MS-17044 - Stuffing Tube, Npt, Nylon, Size 7 (No Superseding Document)
- MS-17045 - Stuffing Tube, Npt, Nylon, Size 8 (No Superseding Document)
- MS-17046 - Stuffing Tube, Npt, Nylon, Size 9 (No Superseding Document)
- MS-17047 - Body, Npt Nylon Stuffing Tube (Superseded by MIL-S-19622/7)
- MS-17234 - Enclosure, 4 Inch for Elec Fittings and Lighting Fixtures (No Superseding Document)
- MS-17270 - Stuffing Tube, Nylon, Size 3 (Use MIL-S-19622/1)
- MS-17271 - Stuffing Tube, Nylon, 90 Degree, Size 3 (No Superseding Document)
- MS-17272 - Packing Assemblies for Nylon Stuffing Tube, Size 3 (Superseded by MIL-S-19622/18)
- MS-17273 - Stuffing Tube, Npt, Nylon Size 3 (No Superseding Document)
- MS-17339 - Cable, Safety (Wire Rope) (No Superseding Document)
- MS-17821 - Strap, Cable, Adjustable, Self Clinching, Plastic, Type I, Class 1 (Use ms-3367)
- MS-17822 - Strap, Cable, Identification, Adjustable, Self-Clinching Plastic, Type Ii, Class 1 (Use ms-3368)
- MS-17848 - Enclosure, 5 Inch for Elec Fittings and Lighting Fixtures (No Superseding Document)
- MS-25064 - Conduit, Flexible, Radio Frequency Shielding (Superseded by SAE as-25064)
- MS-25065 - Ferrule, Flexible Conduit, Radio Frequency Shielding
- MS-25066 - Nut, Flexible Conduit, Radio Frequency Shielding (See Notice 3 for Replacement Information)
- MS-25067 - Conduit Assembly, Flexible, Radio Frequency Shielding
- MS-25171 - Nipple, Electrical Terminal (Asg) (Superseded by A-A-59178)
- MS-25425 - Chassis, Modular Plug-in, for Electronic Modules (No Superseding Document)
- MS-28108 - Junction Box, Power (P-3 Compass)
- MS-3339 - Plate, Mounting, Plastic for Use With Ms3367 Plastic Tiedownstraps
- MS-3340 - Bulkhead Bracket, for Use With ms-3367 Plastic Tiedown Straps
- MS-3341 - Bracket, Mounting, Plastic for Use With ms-3367 Plastic Tie Down Straps
- MS-3367 - Strap, Tiedown, Electrical Components, Adjustable, Self Clinching, Plastic, Type I, Class 1 (Superseded by SAE as-33671)
- MS-3368 - Strap, Tiedown, Electrical Components, Identification, Adjustable, Self Clinching, Plastic, Type Ii, Class 1 (Superseded by SAE as-33681)
- MS-3503 - Rack, Module, Test Equipment (No Superseding Document)
- MS-35762 - Collar, Cable (No Superseding Document)
- MS-39015 - Elbow, Electrical Conduit: With Insulator, Spark Plug Cable (Other Than Aircraft) (No Superseding Document)
- MS-39016 - Nut, Coupling, Electrical Conduit Spark Plug Cable (Other Than Aircraft) (No Superseding Document)
- MS-39017 - Ferrule, Electrical Conduit: Spark Plug Cable Elbow (Other Than Aircraft) (No Superseding Document)
- MS-39018 - Ferrule, Electrical Conduit: Spark Plug Cable (Other Than Aircraft) (No Superseding Document)
- MS-39019 - Elbow, Electrical Conduit: Spark Plug Cable (Other Than Aircraft) (No Superseding Document)
- MS-39024 - Brace, Crossarm, Back (Pole Line) (No Superseding Document)
- MS-39025 - Bracket, Insulator Transposition, Crossarm
- MS-39026 - Hanger, Cable (Pole Line)
- MS-39027 - Link, Reinforcing, Cable (Pole Line) (No Superseding Document)
- MS-39028 - Adapter, Thimble Lead Thread (No Superseding Document)
- MS-39029 - Brace, Crossarm, Wood (No Superseding Document)
- MS-39030 - Brace, Crossarm, Flat (Pole Line)
- MS-39031 - Clamp, Dropwire Electrical Conductor, Strain (Pole Line) (No Superseding Document)
- MS-39032 - Clamp, Cable Suspension (Pole Line) (No Superseding Document)
- MS-39033 - Hanger, Wire Strand (One Hole) (No Superseding Document)
- MS-39034 - Brace, Crossarm, Vertical (No Superseding Document)
- MS-39035 - Bracket, Insulator (Transposition, Span)
- MS-39036 - Hanger, Wirestrand Grade Clamp (Pol Line) (No Superseding Document)
- MS-39037 - Strand Connector, Pole (Pole Line) (No Superseding Document)
- MS-39038 - Strap, Support Wire Strand Hanger (Pole Line) (No Superseding Document)
- MS-39039 - Guy Attachment, Strap (No Superseding Document)
- MS-39040 - Bridle Ring (Pole Line) (No Superseding Document)
- MS-39041 - Clamp, Electrical Strand, Ground (Pole Line) (No Superseding Document)
- MS-39042 - Pin, Insulator Lead Thread (Pole Line) (No Superseding Document)
- MS-39043 - Bracket, Insulator, Steel (Pole Line) (No Superseding Document)
- MS-39044 - Brace, Crossarm, Vertical Communications Type (No Superseding Document)
- MS-39045 - Drive Ring (Pole Line) (No Superseding Document)
- MS-39046 - Clamp, Electrical, Lashing (Pole Line)
- MS-39047 - Step, Pole, Detachable (No Superseding Document)
- MS-39048 - Bracket, Insulator, Transposition (Phantom Circuit) (No Superseding Document)
- MS-39049 - Step, Pole, Steel, Drive
- MS-39050 - Bracket, Insulator, Transposition (No Superseding Document)
- MS-39051 - Hanger, Wire Strand for Angle Use, Three Holes (Pole Line) (No Superseding Document)
- MS-39052 - Bracket, Insulator (Dead End)
- MS-39053 - Hanger, Wire Strand Hot Dip Galvanized
- MS-39054 - Brace, Crossarm, Side (Without Step) (No Superseding Document)
- MS-39055 - Pin, Insulator, Separable Tip (No Superseding Document)
- MS-39072 - Box Connector, Electrical, 90 Deg. (Use an-3063)
- MS-39073 - Adapter, Electrical Conduit (Use an-3055)
- MS-39074 - Box Connector, Electrical (Superseded by an-3064)
- MS-39075 - Ferrule, Electrical Conduit, Flexible (Use an-3050)
- MS-39076 - Ferrule, Electrical Conduit, Flexible, One Step (Use an-3051)
- MS-39077 - Ferrule, Electrical Conduit, Flexible, Two Step (Use an-3052)
- MS-39078 - Nut, Coupling, Electrical Conduit (Use an-3054)
- MS-39079 - Adapter, Electrical Conduit, Rigid To Flexible (Use an-3056)
- MS-39080 - Coupling, Electrical Conduit, Rigid (Use an-3058)
- MS-39081 - Nut, Coupling, Electrical Conduit, Plain, Hexagon (Use an-3066)
- MS-75011 - Clevis, Mast Holder (No Superseding Document)
- MS-75012 - Holder, Mast (Mast Base ab-154/U) (No Superseding Document)
- MS-75013 - Pin, Straight, Headless (No Superseding Document)
- MS-75014 - Stake, Guy, Antenna (Stake GP-2)
- MS-75015 - Stake, Guy, Antenna (Stake GP-101/U)
- MS-75016 - Stake, Guy, Antenna (Guy Stake GP-108/U)
- MS-75017 - Stake, Guy, Antenna (Guy Stake GP-111/g) (No Superseding Document)
- MS-75019 - Stake, Guy, Antenna (No Superseding Document)
- MS-75022 - Bends, Electrical Conduit 90 Degree and 45 Degree Zinc-Coated STD THK-Wall Steel (Superseded by UL-6)
- MS-75023 - Bend, Electrical Conduit, 90 Deg. and 45 Deg. Zinc Coated Thin-Wall Steel (Emt) (Superseded by UL-797)
- MS-90494 - Pin, Insulator Lag Screw Type, Lead Insulator Thread (Superseded by MIL-H-55053)
- MS-90498 - Clamp, Dead End Strain (No Superseding Document)
- MS-91402 - Case, Small-Size (for Use With Electronic Equipment in Aircraft) (No Superseding Document)
- MS-91403 - Case, Large-Size (for Use With Electronic Equipment in Aircraft) (No Superseding Document)
- MS-91404 - Base, Mounting, Small-Size (for Use With Electronic Equipment in Aircraft)
- MS-91405 - Base, Mounting, Large-Size (for Use With Electronic Equipment in Aircraft)
- MS-91601 - Bushing, Electrical Conductor, Series Lc Connectors
- MS-91605 - Bushing, Electrical Conductor, Series Lc Connector
- MS-91606 - Bushing, Electrical Conductor, Series Lc Connectors
- NEMA-BC1 - Bituminous Fiber Duct for Underground Installation - Obsolete
- NEMA-BU1 - Busways
- NEMA-TC6 - Pvc & Abs Plastic Utilities Duct for Underground Installation
- QPL-13909 - Conduit, Metal, Flexible, Electrical, Shielded (No Superseding Document)
- QPL-23190 - Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support (Superseded by QPL-as23190)
- QPL-24705 - Penetrators, Multiple Cable, Electric Cable, General Specification for
- QPL-32554 - Straps, Tie-Down, Adjustable, Non-Metallic, Cable Bundling, General Specification for
- QPL-7763 - Clamp-Strap Type, Electric Wire
- QPL-7931 - Conduit, Electrical, Flexible, Radio Frequency Shielding, for Aircraft Installations
- QPL-AS-23190 - Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
- QPL-AS-81914 - Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification for
- SS-EN-12980 - Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance
- UL-1 - Standard for Flexible Metal Conduit
- UL-3 - Flexible Nonmetallic Tubing for Electric Wiring
- UL-360 - Standard for Liquid-Tight Flexible Metal Conduit
- UL-467 - Grounding and Bonding Equipment
- UL-5 - Standard for Surface Metal Raceways and Fittings
- UL-514A - Metallic Outlet Boxes
- UL-514C - Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
- UL-6 - Electrical Rigid Metal Conduit - Steel
- UL-651 - Standard for Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings
- UL-797 - Electrical Metallic Tubing - Steel
- UL-870 - Standard for Wireways, Auxiliary Gutters, and Associated Fittings
- UL-884 - Standard for Underfloor Raceways and Fittings
- UL-886 - Outlet Boxes & Fittings for Use in Hazardous (Classified) Locations (Withdrawn)
- W-B-811 - Busway Systems, Power, Electrical, 600 Volts +Cancelled, 9/2/83, No S/S Document+
- W-C-1094 - Conduit & Conduit Fittings Plasic, Rigid
- W-C-1124 - Conduit, Raceway, Metal, Conduit, Raceway, Nonmetallic, +Cancelled,5/17/77, No S/S Doc
- W-C-415 - Clamp, Electrical (Live Line Connector) +Cancelled, 8/28/78,No S/S Document+
- W-C-571 - Conduit & Fittings, Nonmetal, Rigid, (Asbestos Cement or Fire Clay Cement), (for Elect
- W-C-575 - Conduit & Fittings, Nonmetallic, Rigid, Bituminized Fiber, Laminated Wall
- W-C-581 - Conduit & Fittings, Nonmetallic, Rigid (Bituminized) +Cancelled, 7/14/78, Use W-C-581+
- W-C-582 - Conduit, Raceway, Metal, & Fitting, Surface
- W-C-583 - Conduit Box & Outlet Fittings, Floor (for Rigid Steel) +Cancelled,7/12/78, No S/S Docu
- W-C-586 - Conduit Outlet Boxes, Bodies, & Entrance Caps, Electrical: Cast Metal
- W-F-406 - Fittings for Cable, Power, Electrical & Conduit, Metal, Flexible
- W-F-408 - Fittings for Conduit, Metal, Rigid, (Thick-Wall & Thin Wall(Emt) Type)
- W-J-800 - Junction Box, Extension, Junction Box, Cover, Junction Box,(Steel, Cadmium or Zinc-Co
- W-J-805 - Junction Box & Cover, Junction Box (Nonmetallic) +Cancelled,10/21/77, No S/S Document+
- W-O-815 - Outlet Boxes, Nonmetallic, With Covers and Accessories +Canc, 7/20/64, Superseded By W-J-805
- W-P-455 - Plate, Wall, Electrical
- W-R-32 - Conduit, Raceway, Metal, and Fittings, Surface +Cancelled, 7/7/64, Superseded By W-C-582
- W-R-36 - Raceway and Fittings, Metallic, Underfloor +Cancelled, 1/23/86, Use UL-884
- W-R-41 - Raceways and Fittings, Nonmetallic, Underfloor +Cancelled, 3/7/57, No S/S Document+
- W-R-550 - Rod, Ground (With Attachments)
- WW-C-540 - Conduit, Metal, Rigid: & Coupling, Elbow & Nipple, Electrical Conduit: Aluminum
- WW-C-563 - CONDUIT, METAL, RIGID ELECTRICAL (Cancelled, use A-A-296)
- WW-C-566 - Conduit, Metal, Flexible
- WW-C-571 - Conduit and Fittings, Nonmetal, Rigid, (Asbestos Cement or Fire Clay Cement), (for Electrical Purposes) - Cancelled 1979, Use WW-C-581
- WW-C-581 - Conduit and Fittings, Nonmetallic, Rigid, (Bituminized Homogeneous Fiber) - Cancelled, 1984, Use UL-6 and UL-1242
- WW-T-806 - Tubing, Electrical, Metallic (Cancelled, 1964, No Replacement)