Document Center is acquired by Nimonik

FSC 5998: Electrical and Electronic assemblies, Boards, Cards, and Associated Hardware

The following documents are a part of this series:

• A-A-55563 - Holder, Electrical Card, Metal Card Guide, General Requirements for
• A-A-55563/1 - Holder, Electrical Card, Metal Card Guide, Open Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/10 - Holder, Electrical Card, Metal Card Guide, Closed Ended, without Flared Entry, with 3 Mounting Holes
• A-A-55563/11 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 3 Offset (Side) Mounting Holes
• A-A-55563/12 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 3 Offset (Side) Mounting Holes
• A-A-55563/13 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes, with Controlled Inside Bend Radius
• A-A-55563/14 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Offset (Side) Mounting Holes with Controlled Inside Bend Radius
• A-A-55563/15 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 3 Mounting Holes, with Controlled Inside Bend Radius
• A-A-55563/16 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 3 Mounting Holes, with Controlled Inside Bend Radius
• A-A-55563/17 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Mounting Holes
• A-A-55563/18 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 3 Mounting Holes
• A-A-55563/19 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, Without Flared Entry, with 2 Mounting Holes, Short Length
• A-A-55563/2 - Holder, Electrical Card, Metal Card Guide, Open Ended, without Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/20 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 2 Mounting Holes, Short Length
• A-A-55563/22 - Holder, Electrical Card, Metal Card Guide, Low Profile, Closed Ended, with Flared Entry, with 3 Mounting Holes, for Versamodule Eurocard Applications
• A-A-55563/23 - Holder, Electrical Card, Metal Card Guide, Medium Profile, Center Mount, with Flared Entry, with 2 Mounting Holes
• A-A-55563/24 - Holder, Electrical Card, Metal Card Guide, Medium Profile, Center Mount, with Flared Entry, with 3 Mounting Holes
• A-A-55563/25 - Holder, Electrical Card, Metal Card Guide, Open Ended, with 2 Mounting Holes, for Use with Heat Sinks
• A-A-55563/26 - Holder, Electrical Card, Metal Card Guide, Open Ended, with 3 Mounting Holes, for Use with Heat Sinks
• A-A-55563/27 - Holder, Electrical Card, Metal Card Guide, Closed Ended, With 2 Mounting Holes, for Use With Heat Sinks
• A-A-55563/28 - Holder, Electrical Card, Metal Card Guide, Closed Ended, With 3 Mounting Holes, for Use With Heat Sinks
• A-A-55563/29 - Holder, Electrical Card, Metal Card Guide, Narrow Profile, Center Mount, with Flared Entry, with 2 Mounting Holes
• A-A-55563/3 - Holder, Electrical Card, Metal Card Guide, Closed Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/30 - Holder, Electrical Card, Metal Card Guide, Center Mounting, with Multiple Mounting Holes, Unsupported for Chassis or Supported Mounting Applications
• A-A-55563/31 - Holder, Electrical Card, Metal Card Guide, Offset Mounting, with Multiple Mounting Holes, Unsupported, for Chassis or Sheet Metal Applications, with Rigid (Right Hand Side) Wall Support
• A-A-55563/32 - Holder, Electrical Card, Metal Card Guide, Offset Mounting, with Multiple Mounting Holes, Unsupported, for Chassis or Sheet Metal Applications, with Rigid (Left Hand Side) Wall Support
• A-A-55563/4 - Holder, Electrical Card, Metal Card Guide, Closed Ended, Without Flared Entry, With 2 Offset (Side) Mounting Holes
• A-A-55563/5 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, with Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/6 - Holder, Electrical Card, Metal Card Guide, Low Profile, Open Ended, without Flared Entry, with 2 Offset (Side) Mounting Holes
• A-A-55563/7 - Holder, Electrical Card, Metal Card Guide, Open Ended, with Flared Entry, with 3 Mounting Holes
• A-A-55563/8 - Holder, Electrical Card, Metal Card Guide, Open Ended, without Flared Entry, with 3 Mounting Holes
• A-A-55563/9 - Holder, Electrical Card, Metal Card Guide, Closed Ended, with Flared Entry, with 3 Mounting Holes
• A-A-59590 - Holder, Electrical Card, Wedge Retainers, 3 Piece, for Cold Plate Applications, General Requirements for
• A-A-59590/1 - Holders, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 x .260 Inch Body Size, Wedge Body Mounting, with Lever Action Locking
• A-A-59590/10 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, with Visual Indication and Screw Retention
• A-A-59590/11 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .240 X .180 Inch Body Size, Wedge Mounting Body
• A-A-59590/12 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .240 X .180 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/13 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, Wedge Mounting Body
• A-A-59590/14 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/15 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, with Screw Retention
• A-A-59590/16 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .375 X .375 Inch Body Size, with Visual Lock Indication and Screw Retention
• A-A-59590/17 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body
• A-A-59590/18 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication
• A-A-59590/19 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body, with Screw Retention
• A-A-59590/2 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, Wedge Mounting Body, with Ejection Action
• A-A-59590/20 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .260 X .260 Inch Body Size, Wedge Mounting Body, with Visual Lock Indication and Screw Retention
• A-A-59590/21 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .500 X .450 Inch Body Size
• A-A-59590/22 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive .500 X .450 Inch Body Size, with Visual Lock Indication
• A-A-59590/23 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .500 X .450 Inch Body Size, with Screw Retention
• A-A-59590/24 - Holders, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .500 X .450 Inch Body Size, with Visual Lock Indication and Screw Retention
• A-A-59590/25 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, with Ejection Action and Visual Lock Indication
• A-A-59590/26 - Holders, Electrical Card, Wedge Retainers, 3 Piece, .250 X .260 Inch Body Size, Shaft Mounting Body, Screw Actuated
• A-A-59590/3 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, with Visual Lock Indication
• A-A-59590/4 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size
• A-A-59590/5 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .225 X .260 Inch Body Size, with Screw Retention
• A-A-59590/6 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive 225 X .260 Inch Body Size, with Visual Lock and Screw Retention
• A-A-59590/7 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size
• A-A-59590/8 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, with Visual Lock Indication
• A-A-59590/9 - Holder, Electrical Card, Wedge Retainers, 3 Piece, Screw Actuated Drive, .220 X .220 Inch Body Size, with Screw Retention
• A-A-59789 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, General Requirements for
• A-A-59789/1 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Mounting Holes, Screw Actuation and Retention
• A-A-59789/10 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Visual Lock Indication
• A-A-59789/11 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes, Screw Actuated
• A-A-59789/12 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes and Visual Lock Indication, Screw Actuated
• A-A-59789/13 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, with Two Mounting Holes and Screw Retention, Screw Actuated
• A-A-59789/14 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, with Two Mounting Holes, Visual Lock Indication, and Screw Retention, Screw Actuated
• A-A-59789/15 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .365 X .375 Inch (9.27 x 9.53 mm) Body, Size, Shaft Mounting Body, Screw Actuated
• A-A-59789/16 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .365 X .375 Inch (9.27 x 9.53 mm) Body Size, Shaft Mounting Body, with Visual Lock Indication, Screw Actuated
• A-A-59789/17 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .290 Inch (6.35 x 7.37 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge, Screw Actuated
• A-A-59789/18 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .290 Inch (6.35 x 7.37 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge and Visual Lock Indication, Screw Actuated
• A-A-59789/19 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .270 Inch (6.35 x 6.86 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge, Screw Actuated
• A-A-59789/2 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes and Visual Lock Indication, with Screw Actuation and Retention
• A-A-59789/20 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .270 Inch (6.35 x 6.86 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge and Visual Lock Indication, Screw Actuated
• A-A-59789/21 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications,.225 X .260 Inch Body Size, with Two or No Mounting Holes, Screw Activated
• A-A-59789/22 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .260 Inch Body Size, Wedge Mounting Body, with Two or No Mounting Holes and Visual Lock Indication, Screw Actuated
• A-A-59789/23 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, with Two, Three, or Four Mounting Holes, Screw Actuated, 7.0 Inch through 8.5 Inch Assembly Length
• A-A-59789/24 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 x .225 Inch Body Size, Wedge Mounting Body, with Two, Three, or Four Mounting Holes and Visual Lock Indication, Screw Actuated, 7.0 Inch Through 8.5 Inch Assembly Length
• A-A-59789/25 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Captive Screw
• A-A-59789/26 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Captive Screw and Visual Lock Indication
• A-A-59789/3 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Wedge Mounting Body, with two Mounting Holes, with Screw Actuation and Retention
• A-A-59789/4 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes, Visual Lock Indication, and Screw Actuation and Retention
• A-A-59789/5 - Holders, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, Lever Actuated, Wedge Mounting Body, with Visual Lock Indication
• A-A-59789/6 - Holders, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, Lever Actuated, Shaft Mounting Body, with Lever Extraction and Visual Lock Indication
• A-A-59789/7 - Holder, Electrical Card, Wedge Retainers 5 Piece, for Cold Plate Applications, .195 X .250 Inch Body Size, Screw Actuated
• A-A-59789/8 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .195 X .250 Inch Body Size, Shaft Mounting Body, Screw Actuated, with Visual Lock Indication
• A-A-59789/9 - Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .225 X .225 Inch Body Size, Shaft Mounting Body, Screw Actuated
• A-A-59812 - Holder, Electrical Card, Metal Card Guide, Multiple Piece, General Requirements for
• A-A-59812/1 - Holder, Electrical Card, Metal Card Guide, Multiple Piece, Center Mounting, with 2,3, or 4 Mounting Holes and Support Housing for Chassis or Cold Plate Mounting Applications
• A-A-59812/2 - Holder, Electrical Card, Metal Card Guide, Center Mounting, with Multiple Mounting Holes and Heat Transfer Housing, for Chassis or Cold Plate Mounting Applications
• A-A-59812/3 - Holder, Electrical Card, Metal Card Guide, Multiple Piece, with Heat Transfer Housing, Flange Mounting with Two, Three, or Four Mounting Holes for Chassis or Cold Plate Mounting Applications
• A-A-59812/4 - Holder, Electrical Card, Metal Card Guide, Multiple Piece, Flange Mounting with Two, Three, or Four Mounting Holes Chassis or Cold Plate Mounting Applications
• A-A-59832 - Extractor, Electrical Card, Metal, General Requirements for
• A-A-59832/1 - Extractor, Electrical Card, Metal, Non-Locking, Single Action, for 'U' Channel Actuating Surfaces, for .032, .063, .094, and .125 Inch Thick Circuit Card Assemblies
• A-A-59832/2 - Extractor, Electrical Card, Metal, Non Locking, Single Action, for 'U' Channel Actuating Surfaces, for .032, .063, .094, and .125 Inch Thick Circuit Card Assemblies
• A-A-59832/3 - Extractor, Electrical Card, Metal, Locking, Single Action, for 'U' Channel Actuating Surfaces, for .063, .094, and .125 Inch Thick Circuit Card Assemblies
• A-A-59832/4 - Extractor, Electrical Card, Metal, Non-Locking, Single Action, for .063, .094, and .125 Inch Thick Circuit Card Assemblies
• A-A-59832/5 - Extractor, Electrical Card, Metal, Non-Locking, Singe-Sided Actuation, Narrow Profile, Angled Actuating Handle, for .032, .063, .094, .125, and .156 Inch Thick Circuit Card Assemblies
• A-A-59832/6 - Extractor, Electrical Card, Metal, Non-Locking, Single-Sided Actuation, Narrow Profile, Straight Actuating Handle for .032, .063, .094, .125, and .156 Inch Thick Circuit Card Assemblies
• A-A-59832/7 - Extractor, Electrical Card, Metal, Non-Locking, Single-Sided Actuation, Narrow Profile, Angled Actuating Handle, With Release Tab, for .032, .063, .094, .125, and .156 Inch Thick Circuit Card Assemblies
• A-A-59832/8 - Extractor, Electrical Card, Metal, Non-Locking, Single-Sided Actuation, Narrow Profile, Straight Actuating Handle, with Release Tab, for .032, .063, .094, .125 and .156 Inch Thick Circuit Card Assemblies
• A-A-59950 - Holder, Electrical Card, Wedge Retainers, 7 Body, for Cold Plate Applications, General Requirements for
• A-A-59950/1 - Holder, Electrical Card, Wedge Retainers, 7 Piece, for Cold Plate Applications, .225 X .225 Inch (5.72 x 5.72 mm) Body Size, Screw Actuated Shaft
• A-A-59950/2 - Holder, Electrical Card, Wedge Retainers, 7 Piece, for Cold Plate Applications, .225 X .225 Inch (5.72 x 5.72 mm) Body Size, Screw Actuated Shaft, with Visual Lock Indication
• A-A-59950/3 - Holder, Electrical Card, Wedge Retainers, 7 Piece, for Cold Plate Applications, .250 X .260 Inch (6.35 x 6.60 mm) Body Size, Screw Actuated Shaft
• A-A-59950/4 - Holder, Electrical Card, Wedge Retainers, 7 Piece, for Cold Plate Applications, .250 X .260 Inch (6.35 x 6.60 mm) Body Size, Screw Actuated Shaft, with Visual Lock Indication
• ANSI/J-STD-003 - Solderability Tests for Printed Boards
• DESC-DWG-10012 - Printed Wiring Board, Rigid, Multilayered, General Drawing
• DESC-DWG-10013 - Printed Wiring Board, Rigid, Multilayered, Type 3 With Plated-Through Holes
• DESC-DWG-83023 - Retainer-Ejector, Electrical Card
• DESC-DWG-84006 - Electrical Card Holders, Card Guide Shallow Channel, Plastic
• DESC-DWG-84101 - Holder, Electrical Card, Card Guide, Deep Channel, Plastic
• DESC-DWG-84103 - Holder, Electrical Card, Wedge Retainer, 3-Piece, Screw Actuated
• DESC-DWG-84168 - Holder, Electrical Card, Card Guide-Retainer, Lever Actuated, Metal
• DESC-DWG-84191 - Extractor, Electrical Card, Metal
• DESC-DWG-85020 - Holder, Electrical Card, Card Guide, Metal, Without Flared Entry
• DESC-DWG-85021 - Holder, Electrical Card, Card Guide, Metal, With Flared Entry
• DESC-DWG-85033 - Holder, Electrical Card, Zero Insertion Force
• DESC-DWG-85034 - Holder, Electrical Card, Metal, Card Guide
• DESC-DWG-85036 - Support, Electrical Card Holder, Spacer
• DESC-DWG-85067 - Holder, Electrical Card, Card Guide, Plastic
• DESC-DWG-85075 - Support, Electrical Card Holder, Mounting Bar
• DESC-DWG-85076 - Holder, Electrical Card, Card Guide, Plastic
• DESC-DWG-86092 - Holder, Electrical Card, Card Guide-Retainer, Lever Actuated, Metal, for Cold Plate Mo
• DESC-DWG-88052 - Holder, Electrical Card, Card Guide-Retainer, Screw Actuated, Metal
• DESC-DWG-89024 - Holder, Electrical Card, Retainer, 5-Piece
• DESC-DWG-89029 - Holder, Electrical Card, Card Guide, Conductive Plastic, Anti-Vibration
• DESC-DWG-89064 - Holder, Electrical Card, Wedge Retainer, 5-Piece, .225 Inch by .225 Inch and .225 Inch by .260 Inch Body Size
• DSCC-85068 - Holder, Electrical Card
• IPC-2152 - Determining Current Carrying Capacity in Printed Board Design
• IPC-2223 - Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
• IPC-2251 - Design Guide for the Packaging of High Speed Electronic Circuits
• IPC-4202 - Flexible Base Dielectrics for Use in Flexible Printed Boards
• IPC-4412 - Specification for Finished Fabric Woven from 'E' Glass for Printed Boards
• IPC-4562 - Metal Foil for Printed Board Applications
• IPC-9191 - General Guidelines for Implementation of Statistical Process Control (SPC)
• IPC-A-41 - Single Sided Artwork
• IPC-D-275 - Design Standard for Rigid Printed Boards & Rigid Printed Boa
• IPC-D-322 - Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes
• IPC-D-356 - Bare Substrate Electrical Test Data Format
• IPC-FC-231/1 - Dielectric, Flexible Base, (Polyimide)
• IPC-FC-231/10 - Flexible Base Dielectric (POLYIMIDE-Cast)
• IPC-FC-231/11 - Flexible Base Dielectric (Polyimide)
• IPC-FC-231/12 - Flexible Base Dielectric (Polyimide)
• IPC-FC-231/13 - Flexible Base Dielectric (PEI)
• IPC-FC-231/14 - Flexible Base Dielectric (Polyimide)
• IPC-FC-231/2 - Flexible Base Dielectric (Fep)
• IPC-FC-231/3 - Dielectric (Polyimide), Base, Flexible
• IPC-FC-231/5 - Flexible Base Dielectric (Epoxy/Polyester Fibers/Polyester Film)
• IPC-FC-231/6 - Flexible Base Dielectric (Epoxy/Glass/Polyester)
• IPC-FC-231/7 - Epoxy, Glass, Flexible Base, Dielectric
• IPC-FC-231/8 - Flexible Base Dielectric
• IPC-FC-231/9 - Flexible Base Dielectric
• IPC-FC-232/1 - Dielectric, Flexible Adhesive Coated, and Flexible Adhesive Bonding Films (Acrylic Polyi
• IPC-FC-232/10 - Dielectric Flexible Adhesive Coated and Flexible Adhesive Bonding Films (ARAMID-Acrylic)
• IPC-FC-232/11 - Dielectric (POLYIMIDE-Butyral: Phenolic), Adhesive Coated, Flexible
• IPC-FC-232/12 - Dielectric (POLYIMIDE-Nitrile: Phenolic), Adhesive Coated, Flexible
• IPC-FC-232/13 - Dielectric (POLIMIDE-Polyetherimide), Adhesive Coated, Flexible
• IPC-FC-232/14 - Dielectric (POLIMIDE-Acrylic), Adhesive Coated, Flexible
• IPC-FC-232/15 - Dielectric (POLYIMIDE-Butyral: Phenolic), Adhesive Coated, Flexible
• IPC-FC-232/16 - Dielectric Coated, Films, (OPOXY-Polyimide), Adhesive Bonding, Flexible and Flexible Adh
• IPC-FC-232/17 - Films (Acrylic-Glass), Adhesive Bonding, Flexible
• IPC-FC-232/18 - Films (Acrylic), Adhesive Bonding, Flexible, Unsupported
• IPC-FC-232/19 - Films (Epoxy), Adhesive Boarding, Flexible, Unsupported
• IPC-FC-232/2 - Dielectric, Flexible Adhesive Coated and Flexible Adhesive Bonding Films (Epoxy Polyimid
• IPC-FC-232/20 - Unsupported Flexible Adhesive Bonding Films (Polyester)
• IPC-FC-232/21 - Dielectric (POLYIMIDE-Polyimide), Flexible Bonding
• IPC-FC-232/3 - Dielectric, Flexible Adhesive Coated (FEP-Acrylic)
• IPC-FC-232/4 - Dielectric (FEP-Epoxy), Adhesive Coated, Flexible
• IPC-FC-232/5 - Dielectric (POLYIMIDE-Fep), Adhesive Coated, Flexible
• IPC-FC-232/6 - Dielectric (FEP-Polyester), Adhesive Coated, Flexible
• IPC-FC-232/7 - Dielectric, Flexible Adhesive Coated, and Flexible Adhesive Bonding Films (Polyester-Pol
• IPC-FC-232/8 - Dielectric (Polyvinyl Fluoride-Epoxy), Adhesive Coated, Flexible
• IPC-FC-232/9 - Dielectric (Polyvinyl Fluoride-Polyester), Adhesive Coated,Flexible
• IPC-FC-241/1 - Metal-Clad, Flexible, Dielectric (Polyimide Acrylic)
• IPC-FC-241/15 - Dielectric (POLYIMIDE-Acrylic), Metal-Clad, Flexible
• IPC-FC-241/16 - Dielectric (POLYIMIDE-Butyral Phenolic), Metal-Clad, Flexible
• IPC-FC-241/17 - Dielectric (POLYIMIDE-Epoxy), Metal-Clad, Flexible
• IPC-FC-241/18 - Dielectric (POLYIMIDE-Chemically Deposited Metal-Adhesiveness), Metal-Clad, Flexible
• IPC-FC-241/2 - Dielectric (POLYIMIDE-Epoxy), Metal-Clad Flexible
• IPC-FC-241/20 - Dielectric (POLYIMIDE-Cyanate Ester) Flexible Metal-Clad
• IPC-FC-241/3 - Metal-Clad, Flexible, Dielectric (Fep Acrylic)
• IPC-FC-241/4 - Metal-Clad, Flexible, Dielectric (Fep Epoxy)
• IPC-FC-241/5 - Dielectric (Polyester-Polyester), Metal-Clad Flexible
• IPC-FC-241/7 - Metal-Clad, Flexible, Dielectric (Epoxy/Polyester Fibers)
• IPC-MF-150/1 - Metal Foil: Copper, Standard Electrodeposited
• IPC-MF-150/2 - Metal Foil: Copper, High Ductility Electrodeposited
• IPC-MF-150/3 - Metal Foil: Copper, High Temperature Elongation
• IPC-MF-150/4 - Metal Foil: Copper, Annealed Electrodeposited
• IPC-MF-150/5 - Metal Foil: Copper, as Rolled-Wrought
• IPC-MF-150/6 - Metal Foil: Copper, Light Cold Rolled-Wrought
• IPC-MF-150/7 - Metal Foil: Copper, Annealed-Wrought
• IPC-MF-150/8 - Metal Foil: Copper, as Rolled-Wrought-Low Temperature Annealable
• IPC-MF-150/9 - Metal Foil: Nickel, Standard Electrodeposited
• IPC-QF-143 - Specifications for Finished Fabric Woven from Quartz (Pure Fused Silica) for Printed Boards
• IPC-SM-840 - Qualification and Performance Specifiation of Permanent Solder Mask and Flexible Cover Materials
• IPC-T-50 - Terms and Definitions for Interconnecting and Packaging Electronic Circuits
• IPC-TM-650.2.3.25.1 - Ionic Cleanliness Testing of Bare PWBs
• MIL-A-24741 - Assemblies, Metal Electrical Backplane, One and Two Layer, General Specification For
• MIL-C-71042 - Circuit Card Assembly, Logic: 11784523
• MIL-C-71043 - Circuit Card Assembly, Amplifier: 11784526
• MIL-DTL-32449 - Spider Transceiver Module
• MIL-DTL-32462 - Spider Munition Control Electronics Assembly
• MIL-DTL-32463 - Spider Munition Control Electronics Assembly Trainer
• MIL-DTL-62736 - Printed Wiring Assembly, I/O
• MIL-DTL-62737 - Printed Wiring Assembly, Computer
• MIL-DTL-62738 - Printed Wiring Assembly, Ignition Interrupt Driver
• MIL-DTL-62739 - Printed Wiring Assembly, Clock/Display Driver
• MIL-DTL-62740 - Printed Wiring Assembly, Special Circuits
• MIL-DTL-62741 - Printed Wiring Assembly, MUX/ADCON
• MIL-HDBK-1861 - Selection and Use1 of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
• MIL-P-50884 - Printed Wiring Board, Flexible or Rigid-Flex, General Specification for (Renumbered MIL-PRF-50884)
• MIL-P-55110 - Printed Wiring Board, General Specification For
• MIL-P-62736 - Printed Wiring Assembly, I/O
• MIL-P-62737 - Printed Wiring Assembly, Computer
• MIL-P-62738 - Printed Wiring Assembly, Ignition Interrupt Driver
• MIL-P-62739 - Printed Wiring Assembly, Clock/Display Driver
• MIL-P-62740 - Printed Wiring Assembly, Special Circuits
• MIL-P-62741 - Printed Wiring Assembly, Mux/Adcon
• MIL-PRF-31032 - Printed Circuit Board/Printed Wiring Board, General Specification for
• MIL-PRF-31032/1 - Printed Wiring Board, Rigid, Multilayered, Thermosetting Resin Base Material, with or without Blind and Buried Plated-Through Holes, for Soldered Part Mounting
• MIL-PRF-31032/2 - Printed Wiring Board, Rigid, Single and Double Layer, Thermosetting Resin Base Material, with or without Plated-through Holes, for Soldered Part Mounting
• MIL-PRF-31032/3 - Printed Wiring Board, Flexible, Single and Double Layer, with or without Plated-through Holes, with or without Stiffeners, for Soldered Part Mounting
• MIL-PRF-31032/4 - Printed Wiring Board, Rigid Flex or Flexible, Multilayer, with Plated-Through Holes, with or without Stiffeners, for Soldered Part Mounting
• MIL-PRF-31032/5 - Printed Wiring Board, Rigid, Multilayered, Thermoplastic, Thermosetting, or Thermoplastic and Thermosetting Resin Base Material, with Plated Through Holes, for High Frequency Applications
• MIL-PRF-31032/6 - Printed Wiring Board, Rigid, Single and Double Sided, Thermoplastic Resin Base Material, with or without Plated-Through Holes, for High Frequency Applications
• MIL-PRF-32006 - Programmable Controller, Naval Shipboard
• MIL-PRF-50884 - Printed Wiring Board, Flexible or Rigid-Flex, General Specification for
• MIL-PRF-55110 - Printed Wiring Board, Rigid, General Specification for
• MIL-S-13949 - Sheet, Printed Wiring Board, General Specification for (No Superseding Document)
• MIL-S-13949/10 - Sheet, Printed Wiring Board, Laminated, Base Material Gi (Woven E-Glass Reinforcement, Polyimide Resin, Heat Resistant, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/11 - Sheet, Printed Wiring Board, Prepreg, Base Material Ge (Woven E-Glass Reinforcement, Majority Difunctional Epoxy Resin) (No Superseding Document)
• MIL-S-13949/12 - Sheet, Printed Wiring Board, Prepreg, Base Material Gf (Woven E-Glass Reinforcement, Majority Difunctional Epoxy Resin, Flame Resistant) (No Superseding Document)
• MIL-S-13949/13 - Sheet, Printed Wiring Board, Prepreg, Base Material Gi (Woven E-Glass Reinforcement, Polyimide Resin) (No Superseding Document)
• MIL-S-13949/15 - Sheet, Printed Wiring Board, Laminated, Base Material AF (Woven Aramid Reinforcement, Epoxy Resin, Flame Resistant, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/16 - Sheet, Printed Wiring Board, Prepreg, Base Material AF (Woven Aramid Reinforcement, Epoxy Resin, Flame Resistant) (No Superseding Document)
• MIL-S-13949/18 - Sheet, Printed Wiring Board, Prepreg, Base Material Gh (Woven E-Glass Reinforcement, Majority Polyfunctional Epoxy Resin, Hot Strength Retention, Flame Resistant) (No Superseding Document)
• MIL-S-13949/19 - Sheet, Printed Wiring Board, Laminated, Base Material Qi (Woven Quartz Reinforcement, Polyimide Resin, Heat Resistant, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/2 - Sheet, Printed Wiring Board, Laminated, Base Material Gb (Woven E-Glass Reinforcement, Majority Polyfunctional Epoxy Resin, Hot Strength Retention, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/20 - Sheet, Printed Wiring Board, Prepreg, Base Material Qi (Woven Quartz Reinforcement, Polyimide Resin) (No Superseding Document)
• MIL-S-13949/24 - Sheet, Printed Wiring Board, Laminated, Base Material GM (Woven E-Glass Reinforcement, Triazine and or Bismalemide Modified Epoxy Resin, Flame Resistant, Metal Clad or Unclad) (No Superseding Document
• MIL-S-13949/26 - Sheet, Printed Wiring Board, Prepreg, Base Material GM (Woven E-Glass Reinforcement, Triazine and or Bismaleimide Modified Epoxy Resin) (No Superseding Document)
• MIL-S-13949/27 - Sheet, Printed Wiring Board, Laminated, Base Material Sc (Woven S-2 Glass Fiber Reinforcement, Majority Cyanate Ester Resin, Flame Resistant, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/28 - Sheet, Printed Wiring Board, Prepreg, Base Material Sc (Woven S-2 Glass Fiber Reinforcement, Majority Cyanate Ester Resin, Flame Resistant) (No Superseding Document)
• MIL-S-13949/29 - Sheet, Printed Wiring Board, Laminated, Base Material Gc (Woven E-Glass Reinforcement, Majority Cyanate Ester Resin, Flame Resistant, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/30 - Sheet, Printed Wiring Board, Prepreg, Base Material Gc (Woven E-Glass Reinforcement, Majority Cyanate Ester Resin, Flame Resistant) (No Superseding Document)
• MIL-S-13949/31 - Sheet, Printed Wiring Board, Laminated, Base Material Bi (Nonwoven Aramid Reinforcement, Polyimide Resin, Metal Clad or Unclad) (No Superseding Document)
• MIL-S-13949/32 - Sheet, Printed Wiring Board, Prepreg, Base Material Bi (Nonwoven Aramid Reinforcement, Polyimide Resin, Flame Resistant) (No Superseding Document)
• MIL-S-13949/4 - Sheet, Printed Wiring Board, Laminated, Base Material Gf (Woven E-Glass Reinforcement, Majority Difunctional Epoxy Resin, Flame Resistant, Metal Clad or Unclad) (No Superseding Document)
• MIL-STD-1861 - Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware, Selection and Use of (Superseded by MIL-HDBK-1861)
• MIL-STD-2198 - Design Requirements for Metal Electrical Backplane Assemblies
• MIL-STD-275 - Printed Wiring for Electronic Equipment (Refer To IPC-D-275 or IPC-2221)
• QML-28870 - Assemblies, Electrical Backplane, Printed-Wiring, General Specification for (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
• QML-31032 - Printed Circuit Board/Printed Wiring Board, General Specification for
• QML-31032-4 - Printed Circuit Boards / Printed Wiring Boards General Specification for, Qualified Manufacturers List
• QPL-13940 - Sheet, Printed Wiring Board, General Specification For
• QPL-13949 - Sheet, Printed Wiring Board, General Specification for (No Superseding Document)
• QPL-28859 - Connector Component Parts, Electrical Backplane, Printed Wiring, General Specification for (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
• QPL-50884 - Printed Wiring Board, Flexible or Rigid-Flex, General Specification for
• QPL-55110 - Printed Wiring Board, Rigid, General Specification for