Document Center is acquired by Nimonik

FSC 9510: Bars and Rods

The following documents are a part of this series:

ASTM:

• ASTM-A331 - Standard Specification for Steel Bars, Alloy, Cold-Finished (Withdrawn 2004)
• ASTM-A616 - Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
• ASTM-A695 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications (Withdrawn 2002)

US GOVERNMENT DOCUMENTS:

• AMS-2251 - Tolerances, Low-Alloy Steel Bars
• AMS-5020 - Steel Bars, Forgings, & Tubing, Free-Cutting,1.5mn-0.25Pb (0.32 - 0.39C) (11l37)
• AMS-5061 - Steel, Low Carbon Bars, and Wire 0.08 - 0.20 (STABILIZED Aug 2017)
• AMS-5062 - Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (STABILIZED Aug 2017)
• AMS-5223 - Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated, Cold Rolled, 10% Reduction
• AMS-5610 - Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 12.5Cr - Low Carbon (SAE 51416, 51416Se), Free-Machining
• AMS-5614 - Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 12Cr - 0.50Mo, Annealed
• AMS-5616 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed
• AMS-5617 - Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
• AMS-5618 - Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (440C), Consumable Electrode Vacuum Melted
• AMS-5620 - Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 13Cr (0.30 - 0.40C) (SAE 51420F, 51420FSe), Free-Machining Grade
• AMS-5629 - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
• AMS-5630 - Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (440C)
• AMS-5632 - Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.5Mo (0.95 - 1.20C) (SAE 51440F), Free-Machining, Annealed
• AMS-5635 - Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 18Cr - 9Ni - 0.21Pb (303Pb), Free-Machining, Solution Heat Treated
• AMS-5636 - Steel, Corrosion-Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated and Cold Drawn, 100 ksi (689 MPa) Tensile Strength
• AMS-5639 - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated
• AMS-5640 - Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining
• AMS-5647 - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated
• AMS-5649 - Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 18Cr - 13Ni - 2.1Mo, Free Machining, Solution Heat Treated
• AMS-5650 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 23Cr - 13.5Ni (SAE 30309S), Solution Heat Treated
• AMS-5653 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing and Rings, 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L), Solution Heat Treated
• AMS-5655 - Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Hardened and Tempered
• AMS-5657 - Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1Al (STABILIZED Apr 2017)
• AMS-5659 - Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5 Cu
• AMS-5660 - Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
• AMS-5667 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable
• AMS-5668 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al, 2100 Deg F (1149 Deg C) Solution and Precipitation Heat Treated
• AMS-5671 - Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings and Rings 72Ni 15.5Cr 0.95Cb 2.5Ti 0.70Al 7.0Fe, Consumable Electrode or Vacuum Induction Melted 1800 Deg F (982 Deg C) Solution Heat Treated, Precipitation Hardenable
• AMS-5706 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated
• AMS-5718 - Steel, Bars, Forgings, Tubing, and Rings, Corrosion Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed
• AMS-5725 - Bars, Corrosion & Heat Resistant Steel 16Cr - +Cancelled, 1991, No S/S Document+
• AMS-5731 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1800 Deg F (982 Deg C) Solution Heat Treated
• AMS-5732 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted 1800 Deg F (982 Deg C), Solution and Precipitation Heat Treated
• AMS-5733 - Bars Steel & Forgings, Corrosion & Heat Resistant 13.5Cr-26NI-3mo-1.8Ti +Superseded By AMS-5732
• AMS-5734 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1650 Deg F (899 Deg C) Solution Heat Treated
• AMS-5735 - Steel Bars, Forgings, Tubing, And Rings, Corrosion And Heat Resistant 15cr - 26ni - 1.3mo - 2.1ti - 0 (Cancelled Dec 1974)
• AMS-5736 - Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant 15Cr 26Ni 1.3Mo 2.1Ti 0.30V 1800 Deg F (982 Deg C) Solution Heat Treated (Cancelled Jan 1974)
• AMS-5737 - Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1650 Deg F (899 Deg C), Solution and Precipitation Heat Treated
• AMS-5739 - Steel, Corrosion & Moderate Heat Resistant, Bars, Forgings,& Rings, 14.5Cr - 6.5NI - 0.7
• AMS-5740 - Steel, Corrosion & Moderate Heat Resistant, Bars, Forgings,& Rings, 14.5Cr - 6.5NI - 0.7
• AMS-5742 - Alloy Bars, Forgings & Rings, Corrosion & Hearesistant, Iron+Cancelled, 1991, No S/S Doc+
• AMS-5744 - Steel, Corrosion and Heat-Resistant, Bars and Forgings, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N, Heat Treated, 170 ksi (1172 MPa) Tensile Strength
• AMS-5745 - Steel, Corrosion & Heat Resistant, Bars & Forgings 16.5Cr -4.5NI - 2.9Mo - 0.10N, Equaliz
• AMS-5755 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 64Ni - 5.0Cr - 24.5Mo - 5.5Fe, Solution Heat Treated
• AMS-5756 - Alloy Bars, Forgings, & Rings, Corrosion & Heat Resistant 54NI-19Cr-10Co-10mo-2.6Ti-1.0al-
• AMS-5757 - Alloy Bar, Forgings, & Rings, Corrosion & Heat Resistant 54NI-19Cr-10Co-10mo-2.6Ti-10al-0.
• AMS-5759 - Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings 52Co - 20Cr - 10Ni - 15W
• AMS-5761 - Steel Bars, Forgings, & Rings, Corrosion Resistant 15Cr-20Co-2.8Mo - Solution Heat Treated
• AMS-5766 - Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, Solution Heat Treated
• AMS-5768 - Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe, Solution and Precipitation Heat Treated
• AMS-5857 - Steel, Corrosion-Resistant, Bars and Wire, 19Cr - 10Ni (SAE 30304), High Yield Strength, Solution Heat Treated and Cold Worked
• AMS-5884 - Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb(Nb) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
• AMS-5887 - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
• AMS-5890 - Nickel, Corrosion and Heat-Resistant, Bars, Forgings, and Extrusions, Thoria Dispersion Strengthened, 2.2Th02, Stress-Relieved (Cancelled Aug 2015)
• AMS-5898 - Steel, Corrosion Resistant, Bars, Wire, and Forgings 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure
• AMS-6257 - Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered
• AMS-6264 - Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (9317)
• AMS-6265 - Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Vacuum Consumable Electrode Remelted
• AMS-6270 - Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615)
• AMS-6274 - Steel, Bars, Forgings, and Tubing, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620)
• AMS-6277 - Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted
• AMS-6278 - Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted
• AMS-6280 - Steel Bars, Forgings, and Rings, 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)
• AMS-6294 - Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620)
• AMS-6300 - Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)
• AMS-6302 - Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)
• AMS-6304 - Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C)
• AMS-6320 - Steel Bars, Forgings, and Rings, 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)
• AMS-6321 - Steel Bars, Forgings, and Tubing, 0.42cr 0.30ni 0.12mo 0.003b (0.38-0.43c) (81b40)
• AMS-6324 - Steel Bars, Forgings, and Tubing, 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (8740 Modified)
• AMS-6328 - Steel, Bars, Forgings, and Tubing, 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (SAE 8750)
• AMS-6348 - Steel, Bars, 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130), Normalized
• AMS-6370 - Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
• AMS-6378 - Steel Bars, 1.0Cr - 0.20Mo - 0.045Se (0.39 - 0.48C) (4142H Modified), Die-Drawn, 130 ksi (896 MPa) Yield Strength, Free Machining
• AMS-6379 - Steel Bars, 0.95Cr - 0.20Mo - 0.05Te (0.40 - 0.53C) SAE 4140Modified, Die Drawn & Tempere
• AMS-6407 - Steel, Bars, Forgings, and Tubing, 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C)
• AMS-6408 - Steel, Hotwork Tool, Bars and Forgings, 5.2Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13), Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
• AMS-6412 - Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)
• AMS-6416 - Steel Bars, Forgings, & Tubing, 1.6Si - 0.82Cr - 1.8NI - 0.40Mo - 0.07V (0.41-0.46C)
• AMS-6419 - Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C), Consumable Electrode Vacuum Remelted
• AMS-6424 - Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C)
• AMS-6425 - Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted
• AMS-6426 - Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode Vacuum Melted (STABILIZED Aug 2016)
• AMS-6427 - Steel Bars, Forgings, and Tubing, 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.25 - 0.33C) (4330 Mod)
• AMS-6430 - Steel, Bars, Forgings, Tubing, and Rings, 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C), (4335 Modified)
• AMS-6431 - Steel, Bars, Forgings, and Tubing, 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C), Vacuum Consumable Electrode Remelted
• AMS-6442 - Steel Bars & Forgings, 0.50Cr (0.98 - 1.10C) (SAE 50100), for Bearing Applications
• AMS-6444 - Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted
• AMS-6445 - Steel, Bars, Forgings, & Tubing, 1.05Cr-1.1Mn (0.92-1.02 C)(Modified 51100), Consumable E
• AMS-6446 - Steel, Bars, Forgings, & Tubing, 1.0Cr (0.98 - 1.10C) (SAE 51100), Electroslag Remelted
• AMS-6449 - Steel, Bars, Forgings, and Tubing, 1.0Cr (0.98 - 1.10C) (SAE 51100) for Bearing Applications (Cancelled May 2006)
• AMS-6470 - Steel, Nitriding, Bars, Forgings, and Tubing 1.6 Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod)
• AMS-6475 - Steel, Nitriding, Bars, Forgings, and Tubing, 1.1Cr - 3.5Ni - 0.25Mo - 1.25Al (0.21-0.26C)
• AMS-6487 - Steel, Bars, and Forgings, 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11), Consumable Electrode Vacuum Melted
• AMS-6488 - Steel, Bars & Forgings 5.0Cr - 1.3Mo - 0.5V - (0.38 - 0.43C)
• AMS-6525 - Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted
• AMS-6526 - Steel, Bars, Forgings, Tubing, and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, Annealed
• AMS-6528 - Steel, Bars, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Special Aircraft Quality Cleanliness, Normalized
• AMS-6529 - Steel, Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized
• AMS-6540 - Steel Bars, Forgings, Tubing, and Rings 0.48cr 8.0ni 4.0co 0.48mo 0.09v (0.24 - 0.30c) Annealed (Cancelled Feb 1965)
• AMS-6541 - Steel Bars, Forgings, Tubing, and Rings 0.48cr 8.0ni 4.0co 0.48mo 0.09v (0.24 - 0.30c) Premium Quality, Consumable Electrode Melted, Annealed (Cancelled Oct 1982)
• AMS-6542 - Steel Bars, Forgings, and Tubing 0.27cr 7.75ni 4.0co 0.27mo 0.09v (0.42 - 0.48c) Premium Quality, Consumable Electrode Melted, Annealed (Cancelled Oct 1982)
• AMS-6543 - Steel, Bars and Forgings 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted Solution Heat Treated, Marage Hardenable
• AMS-7706 - Bar, Sheet, Strip, and Plate, Iron, Commercially Pure, Hot Rolled, Annealed (Cancelled Nov 1972)
• AMS-7727 - Iron-Nickel-Cobalt Alloy, Bars and Forgings 53Fe - 29Ni - 17Co Low Expansion, Glass Sealing (STABILIZED Apr 2017)
• AMS-S-5000 - Steel, Chrome-Nickel-Molybdenum (E4340) Bars & Reforging Stock
• AMS-S-6098 - Steel, Chrome-Nickel-Molybdenum (8735), Bars & Reforging Stock (Aircraft Quality)
• AMS-S-6758 - Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) (STABILIZED Nov 2017)
• AMS-S-8559 - Steel Bars, Carbon, AISI, (1095) Aircraft Quality
• AS-1182 - Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing
• MAM-5706 - Alloy Bars, Forgings, & Rings, Corrosion & Heat Resistant, 57NI - 19.5Cr - 13.5Co - 4.3Mo
• MAM-6304 - Low-Alloy Steel, Heat-Resistant, Bars, Forgings, & Tubing 0.95Cr-0.55mo-0.30V (0.40-0.50C)
• MIL-A-47182 - Alloy, Ferromagnetic, Vacuum Melt (Cobalt Vanadium) (No Superseding Document)
• MIL-A-47227 - Alloy (Iron-Nickel), Ferromagnetic, Sintered, Parts
• MIL-B-11595 - Bar, Metal and Blanks, Steel (Under 2 Inches in Diameter) for Barrels of Small Arms Weapons
• MIL-B-12504 - Bar, Metal and Wire (Nonelectrical), Carbon and Alloy Steel, Cold Drawn for AP Bullet Cores and Shot
• MIL-DTL-23195 - Steel Bars and Forgings, Corrosion Resistant, Austenitic (UNS S30400, S30403, S31600, S31603, S34700, and S34800) (Classified, See Your Contracting Officer)
• MIL-DTL-24128 - Low Carbon Chromium Steel Bars and Forgings - CLASSIFIED - SEE YOUR CONTRACTING OFFICER
• MIL-DTL-24528 - Steel Bars and Forgings, Nickel-Chromium-Molybdenum (UNS G43406)
• MIL-DTL-24538 - Steel Bars and Forgings: High Carbon, Martensitic, Corrosion Resisting (UNS S44002 and UNS S44004) (Classified, See Your Contracting Officer)
• MIL-I-11695 - Iron, Magnetic, Bar, Sheet and Strip (Superseded by ASTM-a848)
• MIL-I-50711 - Iron-Base Sintered Metal Bars (Oil Impregnated) (Superseded by ASTM-B328)
• MIL-L-24128 - Low Carbon Chromium Steel Bars & Forgings
• MIL-N-3182 - Nickel-Molybdenum Alloy Steel Forgings and Bars
• MIL-R-5699 - Rods, Nickel-Chromium-Boron Alloy Welding
• MIL-S-11310 - Steel Bars, Carbon, Hot Rolled, for Cold Shaping, Including Cold Extrusion
• MIL-S-13040 - Steel Bars and Tubes for Piston Rods and Cylinders for Hydro-Pneumatic Recoil Mechanisms and Equilibrators.
• MIL-S-13336 - Steel Bars, Heat Resistant (27% Chromium)
• MIL-S-13433 - Steel Bars, Carbon (Leaded, High Sulfur) (Superseded by QQ-S-637)
• MIL-S-13502 - Steel, Carbon, Ord 1050 Modified, Bars and Shapes
• MIL-S-16598 - Steel Bar (Low Expansion, Free Cutting, 36 Percent Nickel).
• MIL-S-16782 - Steel, Machinery, Cold-Rolled or Cold Drawn, Bars and Rods (Use QQ-S-633)
• MIL-S-16783 - Steel Bar, Alloy (Cold Finished Projectile Stock)
• MIL-S-17758 - Steel Bar and Steel Forging, Nickel Modified Hadfield and Nickel-Molybdenum Modified Hadfield
• MIL-S-18170 - Steel Bars and Forgings, Corrosion Resisting, Radioactive System Service
• MIL-S-18411 - Steel Bars, Carbon, Cold Finished, Free Machining (Use QQ-S-637)
• MIL-S-18732 - Steel Bars, Wire, Forging Stock, Forgings Tubing (431), Special Quality
• MIL-S-19697 - Steel, Tool, Copper Alloy, Non Tempering (Superseded BYASTM-a681)
• MIL-S-20137 - Steel Bar, Rolled, Heat Treated (Shafting) (Superseded by MIL-S-23284)
• MIL-S-20671 - Steel Bone Plates and Screws, Sherman
• MIL-S-21156 - Steel Bars, Heat Treated (for 20mm and 30mm Aircraft Gun Barrels) (No Superseding Document)
• MIL-S-21952 - Steel (HY-80 and HY-100) Bars, Alloy
• MIL-S-23195 - Steel Bars and Forgings Corrosion Resistant (Classified - See Your Contracting Officer)
• MIL-S-23372 - Steel Bar (4.2 Percent Silicon) Vacuum Melted (Electrical)
• MIL-S-23966 - Steel Bar, Billets and Forgings, Alloy Nitriding Application (Use MIL-S-869)
• MIL-S-24502 - Steel, Chromium-Molybdenum-Vanadium Bars
• MIL-S-24528 - Steel Bars and Forgings, Chromium-Nickel-Molybdenum (Classified - See Your Contracting Officer)
• MIL-S-24538 - STEEL BARS, RODS, and FORGINGS, HIGH CARBON (CLASSIFIED, SEE YOUR CONTRACTING OFFICER)
• MIL-S-24550 - STEEL BARS and FORGINGS, AUSTENITIC CORROSION RESISTANT, PRECIPITATION HARDENING (CLASSIFIED - SEE YOUR CONTRACTING OFFICER)
• MIL-S-3917 - Steel, Bar, Carbon, Free Cutting (Superseded BYASTM-a108)
• MIL-S-43 - Steel Bars for Projectile Stock (No Superseding Document)
• MIL-S-46033 - STEEL BARS, CARBON and ALLOY, ROUND, SQUARE, and FLAT (FOR SPRINGS) (Use ASTM-A29/A29M)
• MIL-S-46042 - Steel, Corrosion and Heat Resistant Bar and Forgings (No Superseding Document)
• MIL-S-46047 - Steel, Bars and Blanks (1-3/4 Inches and over in Diameter) for Barrels of Small Arms Weapons
• MIL-S-46070 - Steel Bar for Projectile Stock
• MIL-S-46123 - Steel Bar, Hollow Bar, Wire and Forgings Corrosion and Heat Resistant (No Superseding Document)
• MIL-S-46128 - Steel, Alloy, Bars (V-Modified 4330) for Critical Application (No Superseding Document)
• MIL-S-47036 - Steel, Alloy, High Strength (No Superseding Document)
• MIL-S-47085 - Steel - Relay Silicon, Electrical, Bar (No Superseding Document)
• MIL-S-47086 - Steel, Chromium-Vanadium Alloy (No Superseding Document)
• MIL-S-47139 - Steel, Bar, Plate, Sheet, Strip, Forgings, and Extrusions, Maraging, 18 Percent Nickel (No Superseding Document)
• MIL-S-47262 - Steel, Alloy, Type AISI-H-11 (Modified) (No Superseding Document)
• MIL-S-5000 - Steel, Chrome-Nickel-Molybdenum (4340) Bars, and Forging Stock (Superseded by SAE AMS-S-5000)
• MIL-S-5626 - Steel, Chrome-Molybdenum (4140) Bars, Rods, and Forging Stock (for Aircraft Application) (Superseded by SAE AMS-6382, and SAE AMS-6349)
• MIL-S-6049 - Steel, Chrome-Nickel-Molybdenum (8740) Bars and Reforging Stock (Aircraft Quality) (Superseded by SAE AMS-6322, SAE AMS-6325 and SAE AMS-6327)
• MIL-S-6050 - STEEL, CHROME-NICKEL-MOLYBDENUM (8630) BARS and REFORGING STOCK (AIRCRAFT QUALITY)
• MIL-S-6098 - Steel, Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (Aircraft) (Superseded by SAE AMS-S-6098)
• MIL-S-62470 - Steel, Chrome Nickel Molybdenum, 8620, Bars, Forging, and Tubing, Bearing Quality, Vacuum Degassed (Superseded by SAE AMS-6274 and SAE AMS-6276)
• MIL-S-62471 - Steel, Stainless, Precipitation Hardening (Am 355 (Uns S35500)) (No Superseding Document)
• MIL-S-6709 - Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets and Forging Stock (for Nitriding) (Aircraft Quality) (Superseded by SAE AMS-6470 and SAE AMS-6472)
• MIL-S-6758 - Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) (Superseded by SAE AMS-S-6758)
• MIL-S-7108 - Steel, Alloy (Manganese-Silicon-Nickel), Bars and Forging Stock (Aircraft Quality) - Replaced by AMS-6425
• MIL-S-7393 - Steel Alloy Carburizing, Bars and Billets, Steel Nickel-Chromium (3310, 3316 and 9310), Aircraft Quality
• MIL-S-7420 - Steel Bars, Alloy, Chromium, High Carbon E52100 (Aircraft Quality) (Superseded by SAE AMS-6440, SAE AMS-6444 and SAE AMS-6447)
• MIL-S-7493 - STEEL BARS, ALLOY, CARBURIZING, 4615, 4617, and 4620, AIRCRAFT, QUALITY (SUPERSEDED BY SAE AMS-6290, SAE AMS-6292 AND SAE AMS-6294)
• MIL-S-7720 - Steel, Corrosion,Resistant (18-8) Bars, Wire and Forging Stock (Aircraft Quality) (Superseded by SAE AMS-S-7720)
• MIL-S-7809 - Steel, High Strength, Low Alloy, Bars, Shapes, Sheet, Strip, and Plate (Use MIL-S-12505 Mod ASTM-a441, ASTM-a606)
• MIL-S-81242 - STEEL, CHROME MOLYBDENUM (4130 OR 8630) BARS and REFORGING STOCK (AIRCRAFT, QUALITY, VACUUM DEGASSED) (SEE AMS 6280 and AMS 6370)
• MIL-S-81378 - Steel Bars, Plates, and Reforging Stock Low Alloy, High Quality
• MIL-S-8142 - Steel Bars, Rods and Forgings, Medium Carbon, High Chromium (See QQ-S-763)
• MIL-S-8232 - Steel Alloy, Bars, Low Carbon, High Nickel, SAE 2512 (Supersedes 57-107-18a)
• MIL-S-83030 - Steel Alloy, Carburizing, Bars and Billets, Steel Nickel-Chromium (3310, 3316, and 9310), Premium Quality (See Notice 4 for Replacement Information)
• MIL-S-83135 - Steel Bars, Reforging Stock, and Mechanical Tubing, 4340M, High Quality (SUPERSEDED BY SAE AMS-6409 and SAE AMS-6417)
• MIL-S-83311 - Steel Bar, and Wire, (455) Corrosion Resistant, Precipitation Hardening (Superseded by SAE AMS-5617)
• MIL-S-8503 - Steel Bars, Chrome-Vanadium (6150) (Aircraft Quality) (Asg) (Superseded by SAE AMS-6448)
• MIL-S-8559 - Steel Bars, Carbon, AISI (1095), Aircraft Quality (Superseded by SAE AMS-S-8559)
• MIL-S-861 - Steel Bar, Corrosion Resisting, Naval Steam Turbine Parts Use (Superseded by DOD-F-24669/7)
• MIL-S-8617 - Steel Bars, Carbon, (1035) (Aircraft Quality)
• MIL-S-862 - Steel Bar, Corrosion Resisting, and Steel Billet, Corrosion Resisting, Reforging Application
• MIL-S-866 - Steel, Bar and Billet (for Carburizing)
• MIL-S-869 - Steel Bar, Billet and Forging-Alloy Nitriding Application (Cancelled,1986, Use DOD-F-24669/3)
• MIL-S-8690 - Steel, Chrome-Nickel-Molybdenum, 8620, Bars, Aircraft Quality (Superseded by SAE AMS-6274)
• MIL-S-8695 - Steel, Bars and Wire, Molybdenum (4037) (Aircraft Quality) (Asg) (Use AMS-6300)
• MIL-S-8699 - Steel Bars and Forging Stock (4330) Vanadium Modified, Aircraft Quality (Superseded by SAE AMS-6411 and SAE AMS-6427)
• MIL-S-8707 - Steel Bars and Forging Stock, Chrome-Nickel-Molybdenum, 9840 Aircraft Quality
• MIL-S-8844 - Steel Bar, Reforging Stock, and Mechanical Tubing, Low Alloy, Premium Quality (Superseded by SAE AMS-6414 and SAE AMS-6257)
• MIL-S-890 - STEEL: FORGINGS and BARS FOR HULLS, ENGINES, and ORDNANCE (HEAT TREATED) (SEE MIL-S-24093, MIL-S-23284, MIL-S-23009)
• MIL-S-8967 - Steel Bars, Wire, Forging Stock, Forgings, Mechanical Tubing, (431) Premium Quality (No Superseding Document)
• MIL-S-980 - Steel, Chromium Alloy, Bars (for Torpedo Gyroscope Bearings)
• MIL-STD-1571 - Steel, High Strength, Grinding of (See MIL STD 866)
• MIL-STD-1867 - Shafts, Steel SAE 5140, 5145, and 5150 Heat Treatment of (No Superseding Document)
• MIL-T-18291 - Tool Steels, Carbon and Carbon-Vanadium (Use QQ-T-580)
• MIL-T-19081 - Tool Steel, Alloy (Manganese, Non-Deforming) (Use QQ-T-570)
• MS-14294 - Bar, Metal, Round, Alloy Steel 4130 Chrome Molybdenum (Aircraft Quality) (No Superseding Document)
• MS-14295 - Bar, Metal, Square, Alloy Steel 4130 Chrome Molybdenum (Aircraft Quality) (No Superseding Document)
• MS-14296 - Bar, Metal, Flat, Alloy Steel 4130 Chrome - Molybdenum (Aircraft Quality) (No Superseding Document)
• MS-14297 - Bar, Metal, Hexagon, Alloy Steel 4130 Chrome Molybdenum (Aircraft Quality) (No Superseding Document)
• MS-14410 - Bar, Metal, Round, Corrosion Resistant, Type 302
• MS-14411 - Bar, Metal, Round, Corrosion Resistant, Type 304
• MS-14412 - Bar, Metal, Round, Corrosion Resistant, Type 304l
• MS-14413 - Bar, Metal, Round, Corrosion Resistant, Type 309
• MS-14414 - Bar, Metal, Round, Corrosion Resistant, Type 310
• MS-14415 - Bar, Metal, Round, Corrosion Resistant, Type 316
• MS-14416 - Bar, Metal, Round, Corrosion Resistant, Type 316l
• MS-14417 - Bar, Metal, Round, Corrosion Resistant, Type 321
• MS-14418 - Bar, Metal, Round, Corrosion Resistant, Type 347
• MS-14419 - Bar, Metal, Round, Corrosion Resistant, Type 403
• MS-14420 - Bar, Metal, Round, Corrosion Resistant, Type 410
• MS-14421 - Bar, Metal, Round, Corrosion Resistant, Type 420
• MS-14422 - Bar, Metal, Round, Corrosion Resistant, Type 430
• MS-14423 - Bar, Metal, Round, Corrosion Resistant, Type 440C
• MS-14424 - Bar, Metal, Flat, Corrosion Resistant, Type 302
• MS-14425 - Bar, Metal, Flat, Corrosion Resistant, Type 304
• MS-14426 - Bar, Metal, Flat, Corrosion Resistant, Type 316
• MS-14427 - Bar, Metal, Flat, Corrosion Resistant, Type 316l
• MS-14428 - Bar, Metal, Flat, Corrosion Resistant, Type 321
• MS-14429 - Bar, Metal, Flat, Corrosion Resistant, Type 347
• MS-14430 - Bar, Metal, Flat, Corrosion Resistant, Type 410
• MS-14431 - Bar, Metal, Flat, Corrosion Resistant, Type 440C
• MS-14432 - Bar, Metal, Hexagon, Corrosion Resistant, Type 302
• MS-14433 - Bar, Metal, Hexagon, Corrosion Resistant, Type 304
• MS-14434 - Bar, Metal, Hexagon, Corrosion Resistant, Type 316
• MS-14435 - Bar, Metal, Hexagon, Corrosion Resistant, Type 321
• MS-14436 - Bar, Metal, Hexagon, Corrosion Resistant Type 347
• MS-14437 - Bar, Metal, Hexagon, Corrosion Resistant, Type 403
• MS-14438 - Bar, Metal, Hexagon, Corrosion Resistant, Type 410
• MS-14439 - Bar, Metal, Hexagon, Corrosion Resistant, Type 420
• MS-14440 - Bar, Metal, Square, Corrosion Resistant, Type 302
• MS-14441 - Bar, Metal, Square, Corrosion Resestant, Type 304
• MS-14442 - Bar, Metal, Square, Corrosion Resistant, Type 316
• MS-14443 - Bar, Metal, Square, Corrosion Resistant, Type 321
• MS-14444 - Bar, Metal, Square, Corrosion Resistant, Type 410
• MS-14527 - Bar, Metal, Rectangular, Alloy Steel E4340 (No Superseding Document)
• MS-14528 - Bar, Metal, Round, Alloy Steel E4340 (No Superseding Document)
• MS-14529 - Bar, Metal, Hexagonal, Alloy Steel E4340 (No Superseding Document)
• MS-14530 - Bar, Metal, Square, Alloy Steel E4340 (No Superseding Document)
• MS-500102 - Bar, Metal, Flat, Steel, Carbon, 1018 (No Superseding Document)
• MS-500103 - Bar, Metal, Flat, Steel, Carbon, 1020 (No Superseding Document)
• MS-500104 - Bar, Metal, Flat, Steel, Carbon, 1035 (No Superseding Document)
• MS-500105 - Bar, Metal, Flat, Steel, Carbon 1045 (No Superseding Document)
• MS-500106 - Bar, Metal, Round, Steel, Carbon 1018
• MS-500107 - Bar, Metal, Round, Steel, Carbon, 1020 (No Superseding Document)
• MS-500108 - Bar, Metal, Round, Steel, Carbon, 1035 (No Superseding Document)
• MS-500109 - Bar, Metal, Round, Steel, Carbon, 1045 (No Superseding Document)
• MS-500110 - Bar, Metal, Round, Steel, Carbon, 1141 (No Superseding Document)
• MS-500111 - Bar, Metal, Hexagon, Steel, Carbon 1018 (No Superseding Document)
• MS-500112 - Bar, Metal, Hexagon, Steel, Carbon, 1020 (No Superseding Document)
• MS-500113 - Bar, Metal, Square, Steel, Carbon, 1018 (No Superseding Document)
• MS-500114 - Bar, Metal, Square, Steel, Carbon, 1020 (No Superseding Document)
• MS-500115 - Bar, Metal, Square, Steel, Carbon, 1035 (No Superseding Document)
• MS-500116 - Bar, Metal, Square, Steel, Carbon, 1045 (No Superseding Document)
• MS-500124 - Bar, Metal, Round, Corrosion Resistant Steel, Type 303 (No Superseding Document)
• MS-500125 - Bar, Metal, Round, Corrosion Resistant Steel, Type 303 Se (No Superseding Document)
• MS-500126 - Bar, Metal, Round, Corrosion Resistant Steel, Type 416 (No Superseding Document)
• MS-500127 - Bar, Metal, Round, Corrosion Resistant Steel, Type 430 F (No Superseding Document)
• MS-500128 - Bar, Metal, Hexagon, Corrosion Resistant Steel, Type 303 (No Superseding Document)
• MS-500129 - Bar, Metal, Hexagon, Corrosion Resistant Steel, Type 416 (No Superseding Document)
• MS-500130 - Bar, Metal, Hexagon, Corrosion Resistant Steel, Type 303 Se (No Superseding Document)
• MS-500131 - Bar, Metal, Square, Corrosion Resistant Steel, Type 303 (No Superseding Document)
• MS-500132 - Bar, Metal, Square, Corrosion Resistant Steel, Type 303 Se (No Superseding Document)
• MS-500133 - Bar, Metal, Flat, Corrosion Resistant Steel,Type 303 (No Superseding Document)
• MS-500134 - Bar, Metal, Flat, Corrosion Resistant Steel, Type 303 Se (No Superseding Document)
• MS-500135 - Bar, Metal, Flat, Corrosion Resistant Steel, Type 416 (No Superseding Document)
• MS-500136 - Bar, Metal, Rectangular, Tool Steel, Type m2 (No Superseding Document)
• MS-500137 - Bar, Metal, Rectangular, Tool Steel, Type T1 (No Superseding Document)
• MS-500138 - Bar, Metal, Round, Tool Steel, Type m2 (No Superseding Document)
• MS-500139 - Bar, Metal, Round, Tool Steel, Type T1 (No Superseding Document)
• MS-500140 - Bar, Metal, Square, Tool Steel, Type m2 (No Superseding Document)
• MS-500141 - Bar, Metal, Square, Tool Steel, Type T1 (No Superseding Document)
• MS-52058 - Bar, Round Tool Steel, Type a2 (No Superseding Document)
• MS-52059 - Bar, Round, Tool Steel, Type H21 (No Superseding Document)
• MS-52060 - Bar, Round Tool Steel, Type 01 (No Superseding Document)
• MS-52061 - Bar, Round Tool Steel, Type 02 (No Superseding Document)
• MS-52062 - Bar, Round Tool Steel, Type S5 (No Superseding Document)
• MS-52063 - Bar, Round, Tool Steel, Type D2 (No Superseding Document)
• MS-52064 - Bar, Round Tool Steel, Type D2 (No Superseding Document)
• MS-52065 - Bar, Rectangular, Tool Steel, Type 01 (No Superseding Document)
• MS-52066 - Bar, Rectangular, Tool Steel, Type 02
• MS-52067 - Bar, Rectangular, Tool Steel, Type D3 (No Superseding Document)
• MS-52068 - Bar, Rectangular, Tool Steel, Type S1 (No Superseding Document)
• MS-52069 - Bar, Square, Tool Steel, Type 01 (No Superseding Document)
• MS-52070 - Bar, Square, Tool Steel, Type 02 (No Superseding Document)
• MS-52071 - Bar, Square, Tool Steel, Type S5 (No Superseding Document)
• MS-52072 - Bar, Hexagon, Tool Steel, Type 01 (No Superseding Document)
• MS-52073 - Bar, Hexagon, Tool Steel, Type 02 (No Superseding Document)
• MS-52074 - Bar, Hexagon, Tool Steel, Type S1 (No Superseding Document)
• MS-52075 - Bar, Hexagon, Tool Steel, Type S5 (No Superseding Document)
• MS-52076 - Bar, Octagon, Tool Steel, Type 01 (No Superseding Document)
• MS-52077 - Bar, Octagon, Tool Steel, Type S1 (No Superseding Document)
• MS-52078 - Bar, Octagon, Tool Steel, Type S5 (No Superseding Document)
• MS-52079 - Bar, Round, Tool Steel, Type W1 (No Superseding Document)
• MS-52080 - Bar, Round, Tool Steel, Type W2 (No Superseding Document)
• MS-52081 - Bar, Flat, Tool Steel, Type W1 (No Superseding Document)
• MS-52082 - Bar, Flat, Tool Steel, Type W2 (No Superseding Document)
• MS-52083 - Bar, Square, Tool Steel, Type Wi (No Superseding Document)
• MS-52084 - Bar, Square, Tool Steel, Type W2 (No Superseding Document)
• MS-52085 - Bar, Hexagon, Tool Steel, Type W1 (No Superseding Document)
• MS-52086 - Bar, Octagon, Tool Steel, Type W1 (No Superseding Document)
• MS-90499 - Bar, Round, Steel, Carbon, Medium (No Superseding Document)
• MS-90500 - Bar, Half Round, Steel, Carbon, Medium (No Superseding Document)
• MS-90501 - Bar, Flat, Steel, Carbon, Medium (No Superseding Document)
• MS-90502 - Bar, Square, Steel, Carbon, Medium (No Superseding Document)
• MS-90503 - Bar, Hexagon, Steel, Carbon, Medium (No Superseding Document)
• QQ-B-71 - Bar, Reinforcement, for Concrete +Cancelled, 1963, Superseded By QQ-S-632
• QQ-I-686 - Iron, Wrought, Bar, Single and Double Refined +Cancelled, 1970, No S/S Document+
• QQ-I-706 - Iron and Steel, Sheet, Tinned (Tin&Plate) +Cancelled, 1963,Superseded By QQ-T-425
• QQ-S-624 - Steel Bar, Alloy, Hot Rolled & Cold Finished, (General Purpose)
• QQ-S-628 - Steel Bars and Forgings, Graphitic +Cancelled, 1971, Use QQ-T-570
• QQ-S-630 - Steel, Bar, Carbon, Hot Rolled (Merchant Quality)
• QQ-S-631 - Steel, Bar, Carbon, Hot Rolled (Special Quality)
• QQ-S-633 - Steel Bar, Carbon, Cold Finished & Hot Rolled
• QQ-S-634 - Steel, Bar, Carbon, Cold-Finished, (Standard Quality)
• QQ-S-637 - Steel Bar, Carbon, Cold Finished (Standard Quality)
• QQ-S-741 - Steel, Carbon: Structural Shapes; Plates; & Bars
• QQ-S-763 - Steel Bars, Wire, Shapes, and Forgings; Corrosion Resistant
• QQ-S-764 - Steel Bar, Corrosion Resisting, Free Machining
• QQ-S-778 - Steel, Tool, Alloy +Cancelled, 1959, Superseded By QQ-T-570
• QQ-S-779 - Steel, Tool, Carbon and Carbon-Vanadium +Cancelled, 1960, Superseded By QQ-T-580
• QQ-S-780 - Steel, Tool, High Speed +Cancelled, 1964, No S/S Document+
• QQ-T-570 - Tool Steel, Alloy
• QQ-T-580 - Tool Steel, Carbon and Carbon-Vanadium (Cancelled, 1985, S/Sby ASTM-a686)
• QQ-T-590 - Tool Steel, High-Speed