01.03: Steel--Plate, Sheet, Strip, Wire; Stainless Steel Bar
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A1000 - Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM-A1007 - Standard Specification for Carbon Steel Wire for Wire Rope
- ASTM-A1008 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
- ASTM-A1010 - Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
- ASTM-A1011 - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
- ASTM-A1018 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
- ASTM-A1023 - Standard Specification for Carbon Steel Wire Ropes for General Purposes
- ASTM-A1028 - Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils (Withdrawn 2021)
- ASTM-A1031 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
- ASTM-A1033 - Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
- ASTM-A1038 - Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
- ASTM-A1039 - Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
- ASTM-A1058 - Standard Test Methods for Mechanical Testing of Steel Products—Metric
- ASTM-A1069 - Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
- ASTM-A1083 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
- ASTM-A1084 - Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
- ASTM-A1088 - Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
- ASTM-A109 - Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
- ASTM-A1092 - Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
- ASTM-A109M - Specification for Steel, Strip, Carbon, Cold-Rolled [Metric] (Withdrawn 1998)
- ASTM-A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip (Withdrawn 2014)
- ASTM-A176 - Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip (Withdrawn 2015)
- ASTM-A227 - Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
- ASTM-A228 - Standard Specification for Steel Wire, Music Spring Quality
- ASTM-A229 - Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
- ASTM-A230 - Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
- ASTM-A231 - Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
- ASTM-A232 - Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
- ASTM-A240 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM-A262 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM-A276 - Standard Specification for Stainless Steel Bars and Shapes
- ASTM-A313 - Standard Specification for Stainless Steel Spring Wire
- ASTM-A314 - Standard Specification for Stainless Steel Billets and Bars for Forging
- ASTM-A366 - Standard Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled (Withdrawn 2000)
- ASTM-A368 - Standard Specification for Stainless Steel Wire Strand
- ASTM-A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM-A380 - Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
- ASTM-A401 - Standard Specification for Steel Wire, Chromium-Silicon Alloy
- ASTM-A407 - Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
- ASTM-A414 - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- ASTM-A417 - Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units (Withdrawn 2008)
- ASTM-A424 - Standard Specification for Steel, Sheet, for Porcelain Enameling
- ASTM-A478 - Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
- ASTM-A479 - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- ASTM-A480 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM-A484 - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
- ASTM-A492 - Standard Specification for Stainless Steel Rope Wire
- ASTM-A493 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
- ASTM-A505 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
- ASTM-A506 - Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
- ASTM-A507 - Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
- ASTM-A510 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
- ASTM-A510M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] (Withdrawn 2011)
- ASTM-A555 - Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
- ASTM-A564 - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- ASTM-A565 - Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
- ASTM-A568 - Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
- ASTM-A569 - Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial (Withdrawn 2000)
- ASTM-A570 - Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000)
- ASTM-A580 - Standard Specification for Stainless Steel Wire
- ASTM-A581 - Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
- ASTM-A582 - Standard Specification for Free-Machining Stainless Steel Bars
- ASTM-A606 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
- ASTM-A607 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled (Withdrawn 2000)
- ASTM-A611 - Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)
- ASTM-A619 - Standard Specification for Non-Killed Forming Steel (Nkfs) Sheet, Carbon Cold-Rolled (Withdrawn 1997)
- ASTM-A620 - Standard Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)
- ASTM-A621 - Standard Specification for Forming Steel (FS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 1997)
- ASTM-A622 - Standard Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000)
- ASTM-A635 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
- ASTM-A635M - Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled (Metric) (Withdrawn 1990)
- ASTM-A638 - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
- ASTM-A659 - Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
- ASTM-A666 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
- ASTM-A679 - Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
- ASTM-A680 - Specification for Steel, Strip, High-Carbon, Cold-Rolled Hard, Untempered Quality
- ASTM-A682 - Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009)
- ASTM-A682M - Specification for Steel Strip, High-Carbon, Cold-Rolled, Spring Quality, General Requirements for [Metric] (Withdrawn 1998)
- ASTM-A684 - Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
- ASTM-A693 - Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM-A705 - Standard Specification for Age-Hardening Stainless Steel Forgings
- ASTM-A708 - Practice for Detection of Susceptibility to Intergranular Corrosion in Severely Sensitized Austenitic Stainless Steel (Withdrawn 1988)
- ASTM-A713 - Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
- ASTM-A715 - Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, With Improved Formability (Withdrawn 2000)
- ASTM-A749 - Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
- ASTM-A749M - Specification for General Requirements for Steel, Carbon and High-Strength, Low-Alloy, Hot-Rolled Strip Metric (Withdrawn 1991)
- ASTM-A751 - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
- ASTM-A752 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel (Withdrawn 2011)
- ASTM-A752M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011)
- ASTM-A763 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
- ASTM-A793 - Standard Specification for Rolled Floor Plate, Stainless Steel (Withdrawn 2023)
- ASTM-A794 - Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 Maximum to 0.25 Maximum), Cold-Rolled
- ASTM-A805 - Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
- ASTM-A812 - Standard Specification for Steel, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels (Withdrawn 1997)
- ASTM-A831 - Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components (Withdrawn 2005)
- ASTM-A853 - Standard Specification for Steel Wire, Carbon, for General Use
- ASTM-A873 - Standard Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels (Withdrawn 1997)
- ASTM-A877 - Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
- ASTM-A878 - Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
- ASTM-A880 - Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004)
- ASTM-A887 - Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
- ASTM-A895 - Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
- ASTM-A899 - Standard Specification for Steel Wire, Epoxy-Coated
- ASTM-A905 - Standard Specification for Steel Wire, Pressure Vessel Winding
- ASTM-A907 - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality (Withdrawn 2001)
- ASTM-A923 - Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
- ASTM-A931 - Standard Test Method for Tension Testing of Wire Ropes and Strand
- ASTM-A935 - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled (Withdrawn 2001)
- ASTM-A936 - Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability (Withdrawn 2001)
- ASTM-A938 - Standard Test Method for Torsion Testing of Wire
- ASTM-A941 - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- ASTM-A946 - Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service (Withdrawn 2012)
- ASTM-A947M - Standard Specification for Textured Stainless Steel Sheet [Metric] (Withdrawn 2025)
- ASTM-A959 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
- ASTM-A963 - Standard Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)
- ASTM-A967 - Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
- ASTM-A968 - Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service (Withdrawn 2020)
- ASTM-A969 - Standard Specification for Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)
- ASTM-A980 - Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
- ASTM-A991 - Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- ASTM-F1267 - Standard Specification for Metal, Expanded, Steel