01.06: Coated Steel Products
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A1003 - Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM-A1004 - Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- ASTM-A1019 - Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains (Withdrawn 2012)
- ASTM-A1030 - Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
- ASTM-A1042 - Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains (Withdrawn 2015)
- ASTM-A1046 - Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
- ASTM-A1057 - Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM-A1059 - Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
- ASTM-A1063 - Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM-A1068 - Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
- ASTM-A1072 - Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
- ASTM-A1073 - Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
- ASTM-A1074 - Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
- ASTM-A1079 - Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM-A1087 - Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet
- ASTM-A1093 - Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
- ASTM-A1105 - Standard Specification for Corrugated Steel Manhole Assemblies
- ASTM-A1107 - Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
- ASTM-A1108 - Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
- ASTM-A111 - Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
- ASTM-A116 - Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
- ASTM-A121 - Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM-A123 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM-A143 - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
- ASTM-A153 - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM-A239 - Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
- ASTM-A308 - Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process (Withdrawn 2015)
- ASTM-A309 - Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
- ASTM-A326 - Specification for Zinc-Coated (Galvanized) High Tensile Steel Telephone and Telegraph Line Wire (Withdrawn 1990)
- ASTM-A361 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Roofing and Siding (Withdrawn 1995)
- ASTM-A363 - Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
- ASTM-A384 - Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
- ASTM-A385 - Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
- ASTM-A390 - Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
- ASTM-A392 - Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
- ASTM-A411 - Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
- ASTM-A428 - Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
- ASTM-A444 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Storm Sewer and Drainage Pipe (Withdrawn 1995)
- ASTM-A446 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality (Withdrawn 1994)
- ASTM-A459 - Standard Specification for Zinc-Coated Flat Steel Armoring Tape
- ASTM-A460 - Standard Specification for Copper-Clad Steel Wire Strand
- ASTM-A463 - Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- ASTM-A473 - Standard Specification for Stainless Steel Forgings
- ASTM-A474 - Standard Specification for Aluminum-Coated Steel Wire Strand
- ASTM-A475 - Standard Specification for Zinc-Coated Steel Wire Strand
- ASTM-A491 - Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
- ASTM-A525 - Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM-A525M - Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Metric) Withdrawn 1994
- ASTM-A526 - Withdrawn 1994: Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
- ASTM-A527 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality (Withdrawn 1994)
- ASTM-A528 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process Drawing Quality (Withdrawn 1994)
- ASTM-A584 - Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric (Withdrawn 2002)
- ASTM-A585 - Standard Specification for Aluminum-Coated Steel Barbed Wire (Withdrawn 2002)
- ASTM-A586 - Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand
- ASTM-A591 - Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications (Withdrawn 2005)
- ASTM-A599 - Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
- ASTM-A603 - Standard Specification for Zinc-Coated Steel Structural Wire Rope
- ASTM-A623 - Standard Specification for Tin Mill Products, General Requirements
- ASTM-A623M - Standard Specification for Tin Mill Products, General Requirements [Metric]
- ASTM-A624 - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
- ASTM-A625 - Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
- ASTM-A625M - Specification for Tin Mill Products, Black Plate, Single Reduced. (Metric) (Withdrawn 1992)
- ASTM-A626 - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
- ASTM-A630 - Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
- ASTM-A640 - Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
- ASTM-A641 - Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
- ASTM-A650 - Standard Specification for Tin Mill Products, Black Plate, Double Reduced
- ASTM-A650M - Specification for Special Requirements for Steel Plates for Nuclear and Other Special Applications (Withdrawn 1988)
- ASTM-A653 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM-A657 - Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
- ASTM-A676 - Specification for Hot-Dipped Aluminum Coatings on Ferrous Articles
- ASTM-A740 - Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
- ASTM-A741 - Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
- ASTM-A742 - Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
- ASTM-A754 - Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM-A755 - Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
- ASTM-A760 - Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- ASTM-A761 - Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- ASTM-A762 - Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM-A764 - Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
- ASTM-A780 - Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- ASTM-A783 - Specification for Aluminum-Zinc-Alloy-Coated Steel Chain Link Fence Fabric (Withdrawn 1986)
- ASTM-A784 - Specification for Aluminum-Zinc Alloy-Coated Steel Wire Rope and Fittings for Highway Guard Rail (Withdrawn 1987)
- ASTM-A785 - Specification for Aluminum-Zinc Alloy-Coated Wire Strand (Withdrawn 1987)
- ASTM-A792 - Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
- ASTM-A792M - Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot Dip Process, General Requirements (Metric) (Withdrawn 1994)
- ASTM-A796 - Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
- ASTM-A797 - Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1988)
- ASTM-A798 - Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
- ASTM-A807 - Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
- ASTM-A809 - Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
- ASTM-A810 - Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
- ASTM-A816 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, High-Strength, Low Alloy (Withdrawn 1994)
- ASTM-A817 - Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
- ASTM-A818 - Standard Specification for Coppered Carbon Steel Wire
- ASTM-A819 - Specification for Steel Sheet, Aluminum-Coated Type 2 for Storm Sewer and Drainage Pipe (Withdrawn 1995)
- ASTM-A824 - Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
- ASTM-A825 - Specification for Steel Sheet, Composite Coated for Corrugated Steel Sewer Pipe and Bin Type Retaining Walls (Withdrawn 1989)
- ASTM-A849 - Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- ASTM-A854 - Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
- ASTM-A855 - Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
- ASTM-A856 - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
- ASTM-A862 - Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
- ASTM-A863 - Specification for Corrugated Steel Pipe With Smooth Pvc Liner for Seweres and Drains (Withdrawn 1990)
- ASTM-A875 - Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
- ASTM-A879 - Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM-A885 - Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
- ASTM-A896 - Standard Practice for Conducting Case Studies on Galvanized Structures
- ASTM-A90 - Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM-A902 - Standard Terminology Relating to Metallic Coated Steel Products
- ASTM-A916 - Specification for Steel Sheet, Zinc-5% Aluminum-Mischmetal Alloy-Coated by Hot-Dip Process for Storm Sewer and Drainage Pipe (Withdrawn 1995)
- ASTM-A917 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
- ASTM-A918 - Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM-A924 - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM-A925 - Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
- ASTM-A926 - Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe (Withdrawn 2016)
- ASTM-A929 - Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
- ASTM-A930 - Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
- ASTM-A964 - Standard Specification for Corrugated Steel Box Culverts
- ASTM-A974 - Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
- ASTM-A975 - Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
- ASTM-A978 - Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020)
- ASTM-A979 - Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
- ASTM-A987 - Standard Practice for Measuring Shape Characteristics of Tin Mill Products
- ASTM-A998 - Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
- ASTM-F1043 - Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
- ASTM-F1083 - Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
- ASTM-F1183 - Standard Specification for Aluminum Alloy Chain Link Fence Fabric
- ASTM-F1184 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
- ASTM-F1222 - Classification for Hardware for Wood Fencing (Withdrawn 2000)
- ASTM-F1234 - Specification for Protective Coatings on Steel Framework for Fences (Withdrawn 1995)
- ASTM-F1345 - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
- ASTM-F1379 - Standard Terminology Relating to Barbed Tape
- ASTM-F1553 - Standard Guide for Specifying Chain Link Fence
- ASTM-F1664 - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
- ASTM-F1665 - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
- ASTM-F1712 - Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015)
- ASTM-F1908 - Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
- ASTM-F1910 - Standard Specification for Long Barbed Tape Obstacles
- ASTM-F1911 - Standard Practice for Installation of Barbed Tape
- ASTM-F1999 - Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
- ASTM-F2000 - Standard Safety Performance Specification for Fences for Baseball and Softball Fields
- ASTM-F2049 - Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
- ASTM-F2200 - Standard Specification for Automated Vehicular Gate Construction
- ASTM-F2408 - Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
- ASTM-F2409 - Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
- ASTM-F2453 - Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
- ASTM-F2548 - Standard Specification for Expanded Metal Fence Systems for Security Purposes
- ASTM-F2589 - Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
- ASTM-F2611 - Standard Guide for Design and Construction of Chain Link Security Fencing
- ASTM-F2630 - Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
- ASTM-F2631 - Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities (Withdrawn 2016)
- ASTM-F2698 - Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
- ASTM-F2699 - Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
- ASTM-F2780 - Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
- ASTM-F2781 - Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
- ASTM-F2814 - Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
- ASTM-F2919 - Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
- ASTM-F2957 - Standard Specification for Ornamental Aluminum Fence Systems
- ASTM-F3000 - Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
- ASTM-F3151 - Standard Specification for Driven Steel Post Drive Anchor System
- ASTM-F3204 - Standard Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes
- ASTM-F3342 - Standard Guide for Temporary Fence Applications for Construction Sites
- ASTM-F3459 - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls
- ASTM-F3558 - Standard Guide for Chain-Link Pickleball Court Fences
- ASTM-F537 - Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
- ASTM-F552 - Standard Terminology Relating to Chain Link Fencing
- ASTM-F567 - Standard Practice for Installation of Chain-Link Fence
- ASTM-F573 - Specification for Residential Zinc-Coated Steel Chain-Link Fence Fabric (Withdrawn 1993)
- ASTM-F626 - Standard Specification for Fence Fittings
- ASTM-F654 - Standard Specification for Residential Chain Link Fence Gates
- ASTM-F668 - Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
- ASTM-F669 - Specification for Strength Requirements of Metal Posts and Rails for Industrial Chain Link Fence (Withdrawn 1995)
- ASTM-F761 - Standard Specification for Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence (Withdrawn 2003)
- ASTM-F900 - Standard Specification for Industrial and Commercial Steel Swing Gates
- ASTM-F934 - Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
- ASTM-F964 - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
- ASTM-F969 - Standard Practice for Construction of Chain-Link Tennis Court Fence