03.06: Molecular Spectroscopy; Surface Analysis
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C574 - Method for Chemical Analyisis of Magnesite and Dolomite Refractories
- ASTM-C705 - Method for Chemical Analysis of Zirconia Refractories (Withdrawn 1993)
- ASTM-E1015 - Practice for Reporting Spectra in X-Ray Photoelectron Spectroscopy (Withdrawn 1994)
- ASTM-E1016 - Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
- ASTM-E1063 - Test Method for X-Ray Emission Spectrometric Determination of Cerium and Lanthanum in Carbon and Low-Alloy Steel (Withdrawn 1998)
- ASTM-E1078 - Standard Guide for Specimen Preparation and Mounting in Surface Analysis
- ASTM-E1127 - Standard Guide for Depth Profiling in Auger Electron Spectroscopy (Withdrawn 2024)
- ASTM-E1140 - Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
- ASTM-E1151 - Standard Practice for Ion Chromatography Terms and Relationships
- ASTM-E1162 - Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM-E117 - Method for Spectrographic Analysis of Pig-Lead by the Point-To-Plane Technique (Withdrawn 1995)
- ASTM-E1217 - Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
- ASTM-E1252 - Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM-E1303 - Standard Practice for Refractive Index Detectors Used in Liquid Chromatography
- ASTM-E131 - Standard Terminology Relating to Molecular Spectroscopy
- ASTM-E1330 - Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analyses (Withdrawn 1993)
- ASTM-E1421 - Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
- ASTM-E1438 - Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
- ASTM-E1449 - Standard Guide for Supercritical Fluid Chromatography Terms and Relationships
- ASTM-E1504 - Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM-E1505 - Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards (Withdrawn 2010)
- ASTM-E1510 - Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
- ASTM-E1511 - Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
- ASTM-E1523 - Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy (Withdrawn 2024)
- ASTM-E1577 - Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis (Withdrawn 2020)
- ASTM-E1578 - Standard Guide for Laboratory Informatics
- ASTM-E1581 - Practice for Using Pre-Control in the Instrumental/Analytical Laboratory (Withdrawn 1998)
- ASTM-E1614 - Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
- ASTM-E1634 - Standard Guide for Performing Sputter Crater Depth Measurements
- ASTM-E1635 - Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM-E1636 - Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function (Withdrawn 2019)
- ASTM-E1642 - Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM-E1653 - Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
- ASTM-E1654 - Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
- ASTM-E1655 - Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM-E1657 - Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM-E168 - Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM-E1683 - Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM-E169 - Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
- ASTM-E1698 - Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
- ASTM-E1747 - Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications
- ASTM-E1790 - Standard Practice for Near Infrared Qualitative Analysis
- ASTM-E1791 - Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
- ASTM-E1813 - Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy (Withdrawn 2016)
- ASTM-E1829 - Standard Guide for Handling Specimens Prior to Surface Analysis
- ASTM-E1840 - Standard Guide for Raman Shift Standards for Spectrometer Calibration
- ASTM-E1865 - Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
- ASTM-E1866 - Standard Guide for Establishing Spectrophotometer Performance Tests
- ASTM-E1880 - Standard Practice for Tissue Cryosection Analysis with SIMS
- ASTM-E1881 - Standard Guide for Cell Culture Analysis with SIMS
- ASTM-E1944 - Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
- ASTM-E1947 - Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
- ASTM-E1948 - Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
- ASTM-E1982 - Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
- ASTM-E1989 - Standard Specification for Laboratory Equipment Control Interface (LECIS) (Withdrawn 2009)
- ASTM-E204 - Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index (Withdrawn 2014)
- ASTM-E2056 - Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
- ASTM-E2066 - Standard Guide for Validation of Laboratory Information Management Systems (Withdrawn 2015)
- ASTM-E2077 - Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
- ASTM-E2078 - Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data
- ASTM-E2105 - Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM-E2106 - Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM-E2108 - Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
- ASTM-E2143 - Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
- ASTM-E2310 - Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy (Withdrawn 2024)
- ASTM-E2382 - Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM-E2426 - Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
- ASTM-E250 - Standard Practice for Use of CODEN (Withdrawn 2014)
- ASTM-E2529 - Standard Guide for Testing the Resolution of a Raman Spectrometer
- ASTM-E2530 - Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015)
- ASTM-E260 - Standard Practice for Packed Column Gas Chromatography
- ASTM-E2617 - Standard Practice for Validation of Empirically Derived Multivariate Calibrations
- ASTM-E2642 - Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
- ASTM-E2695 - Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy (Withdrawn 2018)
- ASTM-E2719 - Standard Guide for Fluorescence—Instrument Calibration and Qualification
- ASTM-E2734 - Standard Specification for Dimensions of Knife-Edge Flanges
- ASTM-E2735 - Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
- ASTM-E275 - Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
- ASTM-E2911 - Standard Guide for Relative Intensity Correction of Raman Spectrometers
- ASTM-E2977 - Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
- ASTM-E3029 - Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
- ASTM-E334 - Standard Practice for General Techniques of Infrared Microanalysis
- ASTM-E355 - Standard Practice for Gas Chromatography Terms and Relationships
- ASTM-E386 - Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy (Withdrawn 2015)
- ASTM-E387 - Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
- ASTM-E388 - Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
- ASTM-E403 - Method for Optical Emission Spetrometric Analysis of Carbon and Low-Alloy Steel by the Point-To-Plane Technique (Withdrawn 1995)
- ASTM-E504 - Practice for Selection of Electrode Material Used in Optical Emission Spectroscopy Based on Physical Properties (Withdrawn 1998)
- ASTM-E516 - Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
- ASTM-E528 - Practice for Grounding Basic Optical Emission Spectrochemical Equipment (Withdrawn 1998)
- ASTM-E573 - Standard Practices for Internal Reflection Spectroscopy
- ASTM-E578 - Standard Test Method for Linearity of Fluorescence Measuring Systems
- ASTM-E579 - Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
- ASTM-E594 - Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
- ASTM-E673 - Standard Terminology Relating to Surface Analysis (Withdrawn 2012)
- ASTM-E682 - Standard Practice for Liquid Chromatography Terms and Relationships
- ASTM-E684 - Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces (Withdrawn 2012)
- ASTM-E685 - Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM-E697 - Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
- ASTM-E827 - Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy (Withdrawn 2017)
- ASTM-E840 - Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
- ASTM-E902 - Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers (Withdrawn 2011)
- ASTM-E924 - Standard Guide for Quality Assurance of Laboratories Using Molecular Spectroscopy (Withdrawn 2003)
- ASTM-E925 - Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
- ASTM-E932 - Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
- ASTM-E946 - Test Method for Water Absorption of Bentonite by the Porous Plate Method (Withdrawn 1997)
- ASTM-E958 - Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
- ASTM-E983 - Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
- ASTM-E984 - Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
- ASTM-E995 - Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy
- ASTM-E996 - Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy