04.04: Roofing and Waterproofing
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1127 - Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
- ASTM-C1250 - Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes (Withdrawn 2015)
- ASTM-C1305 - Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
- ASTM-C1306 - Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM-C1471 - Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
- ASTM-C1522 - Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
- ASTM-C836 - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
- ASTM-C898 - Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
- ASTM-C957 - Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
- ASTM-C981 - Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM-D1079 - Standard Terminology Relating to Roofing and Waterproofing
- ASTM-D1187 - Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
- ASTM-D1227 - Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
- ASTM-D1327 - Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
- ASTM-D1370 - Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
- ASTM-D146 - Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
- ASTM-D147 - Methods of Testing Bituminous Mastics (Withdrawn 1984)
- ASTM-D1668 - Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
- ASTM-D1669 - Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
- ASTM-D1670 - Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
- ASTM-D173 - Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
- ASTM-D1863 - Standard Specification for Mineral Aggregate Used on Built-Up Roofs
- ASTM-D1864 - Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
- ASTM-D1865 - Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
- ASTM-D1866 - Test Method for Translucency of Mineral Aggregate Used on Built-Up Roofs (Withdrawn 1989)
- ASTM-D1970 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
- ASTM-D2178 - Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
- ASTM-D224 - Standard Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt) (Withdrawn 2002)
- ASTM-D225 - Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules (Withdrawn 2012)
- ASTM-D226 - Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM-D227 - Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM-D228 - Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
- ASTM-D2398 - Test Method for Softening Point of Bitumen in Ethylene Glycol (Ring-and-Ball) (Withdrawn 1984)
- ASTM-D249 - Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules (Withdrawn 2002)
- ASTM-D250 - Specification for Asphalt-Saturated Asbestos Felt Used in Roofing and Waterproofing (Withdrawn 1991)
- ASTM-D2521 - Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
- ASTM-D2523 - Standard Practice for Testing Load-Strain Properties of Roofing Membranes
- ASTM-D255 - Standard Method for Steam Distillation of Bituminous Protective Coatings (Withdrawn 2000)
- ASTM-D2626 - Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
- ASTM-D2643 - Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
- ASTM-D2746 - Standard Test Method for Staining Tendency of Asphalt (Stain Index)
- ASTM-D2822 - Standard Specification for Asphalt Roof Cement, Asbestos Containing (Withdrawn 2016)
- ASTM-D2823 - Standard Specification for Asphalt Roof Coatings, Asbestos Containing (Withdrawn 2014)
- ASTM-D2824 - Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos
- ASTM-D2829 - Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems
- ASTM-D2939 - Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
- ASTM-D3018 - Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- ASTM-D3019 - Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
- ASTM-D3105 - Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
- ASTM-D312 - Standard Specification for Asphalt Used in Roofing
- ASTM-D3161 - Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
- ASTM-D3320 - Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
- ASTM-D3378 - Specification for Asphalt-Saturated and Coated Asbestos Felt Base Sheet Used in Roofing (Withdrawn 1985)
- ASTM-D3409 - Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
- ASTM-D3423 - Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
- ASTM-D3462 - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
- ASTM-D3468 - Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
- ASTM-D36 - Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM-D3617 - Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
- ASTM-D3672 - Specification for Venting Asphalt-Saturated and Coated Inorganic Felt Base Sheet Used in Roofing (Withdrawn 1991)
- ASTM-D371 - Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; Wide Selvage (Withdrawn 2002)
- ASTM-D3745 - Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type) (Withdrawn 2016)
- ASTM-D3746 - Standard Test Method for Impact Resistance of Bituminous Roofing Systems
- ASTM-D3747 - Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation (Withdrawn 2016)
- ASTM-D3791 - Standard Practice for Evaluating the Effects of Heat on Asphalts
- ASTM-D3805 - Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
- ASTM-D3909 - Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
- ASTM-D4 - Standard Test Method for Bitumen Content
- ASTM-D4022 - Standard Specification for Coal Tar Roof Cement, Asbestos Containing (Withdrawn 2014)
- ASTM-D4073 - Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
- ASTM-D4074 - Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
- ASTM-D41 - Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM-D43 - Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM-D4402 - Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM-D4434 - Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
- ASTM-D4479 - Standard Specification for Asphalt Roof Coatings—Asbestos-Free
- ASTM-D449 - Standard Specification for Asphalt Used in Dampproofing and Waterproofing
- ASTM-D450 - Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
- ASTM-D451 - Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM-D452 - Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
- ASTM-D4586 - Standard Specification for Asphalt Roof Cement, Asbestos-Free
- ASTM-D4601 - Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
- ASTM-D4637 - Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM-D4798 - Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM-D4799 - Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
- ASTM-D4811 - Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
- ASTM-D4830 - Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
- ASTM-D4866 - Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
- ASTM-D4869 - Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
- ASTM-D4897 - Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
- ASTM-D4932 - Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
- ASTM-D4977 - Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
- ASTM-D4989 - Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
- ASTM-D4990 - Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
- ASTM-D5019 - Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane (Withdrawn 2011)
- ASTM-D5036 - Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012)
- ASTM-D5076 - Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
- ASTM-D5081 - Standard Test Method for Aggregate Layer Hiding Power
- ASTM-D5082 - Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012)
- ASTM-D5100 - Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
- ASTM-D5147 - Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM-D529 - Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013)
- ASTM-D5295 - Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
- ASTM-D5385 - Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
- ASTM-D5405 - Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
- ASTM-D5469 - Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
- ASTM-D5601 - Standard Test Method for Tearing Resistance of Roofing and Waterproofing Materials and Membranes
- ASTM-D5602 - Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM-D5635 - Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM-D5636 - Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
- ASTM-D5643 - Standard Specification for Coal Tar Roof Cement, Asbestos Free
- ASTM-D5665 - Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
- ASTM-D5683 - Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
- ASTM-D5726 - Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
- ASTM-D5727 - Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
- ASTM-D5843 - Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
- ASTM-D5849 - Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
- ASTM-D5869 - Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
- ASTM-D5898 - Standard Guide for Standard Details for Adhered Sheet Waterproofing
- ASTM-D5957 - Standard Guide for Flood Testing Horizontal Waterproofing Installations
- ASTM-D6 - Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
- ASTM-D6083 - Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
- ASTM-D6134 - Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
- ASTM-D6135 - Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing (Withdrawn 2014)
- ASTM-D6136 - Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method
- ASTM-D6152 - Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
- ASTM-D6162 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM-D6163 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
- ASTM-D6164 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM-D6221 - Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
- ASTM-D6222 - Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM-D6223 - Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
- ASTM-D6225 - Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM-D6294 - Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
- ASTM-D6298 - Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
- ASTM-D6356 - Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
- ASTM-D6369 - Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes (Withdrawn 2015)
- ASTM-D6380 - Standard Specification for Asphalt Roll Roofing (Organic Felt)
- ASTM-D6381 - Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
- ASTM-D6382 - Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
- ASTM-D6383 - Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
- ASTM-D6451 - Standard Guide for Application of Asphalt Based Protection Board
- ASTM-D6506 - Standard Specification for Asphalt Based Protection Board for Below-Grade Waterproofing
- ASTM-D6509 - Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
- ASTM-D6510 - Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems (Withdrawn 2015)
- ASTM-D6511 - Standard Test Methods for Solvent Bearing Bituminous Compounds
- ASTM-D6622 - Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
- ASTM-D6630 - Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
- ASTM-D6694 - Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
- ASTM-D6705 - Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
- ASTM-D6753 - Standard Specification for Coal Tar Adhesive
- ASTM-D6754 - Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
- ASTM-D6757 - Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
- ASTM-D6769 - Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
- ASTM-D6805 - Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
- ASTM-D6848 - Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011)
- ASTM-D6878 - Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
- ASTM-D6945 - Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
- ASTM-D6946 - Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2022)
- ASTM-D6947 - Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
- ASTM-D6948 - Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
- ASTM-D6950 - Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
- ASTM-D7051 - Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
- ASTM-D7052 - Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
- ASTM-D7053 - Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
- ASTM-D7067 - Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014)
- ASTM-D7105 - Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
- ASTM-D7119 - Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
- ASTM-D7120 - Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
- ASTM-D7158 - Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
- ASTM-D7186 - Standard Practice for Quality Assurance Observation of Roof Construction and Repair
- ASTM-D7281 - Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
- ASTM-D7311 - Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane (Withdrawn 2013)
- ASTM-D7349 - Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
- ASTM-D7379 - Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
- ASTM-D7425 - Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
- ASTM-D7492 - Standard Guide for Use of Drainage System Media with Waterproofing Systems
- ASTM-D7505 - Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
- ASTM-D7530 - Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
- ASTM-D7586 - Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies (Withdrawn 2020)
- ASTM-D7635 - Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
- ASTM-D7636 - Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
- ASTM-D7654 - Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
- ASTM-D7655 - Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
- ASTM-D7693 - Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
- ASTM-D7694 - Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
- ASTM-D7832 - Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
- ASTM-D7851 - Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
- ASTM-D7877 - Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
- ASTM-D7897 - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
- ASTM-D7954 - Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
- ASTM-D8013 - Standard Guide for Establishing a Recycle Program for Roof Coverings Roofing Membrane and Shingle Materials
- ASTM-D8014 - Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems
- ASTM-D8051 - Standard Specification for Wax-Modified Asphalt Used in Roofing
- ASTM-D8052 - Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
- ASTM-D8099 - Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
- ASTM-D8109 - Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
- ASTM-D8154 - Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
- ASTM-D8231 - Standard Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
- ASTM-D8425 - Standard Guide for the Use of Sodium Bentonite Needle-Punched Geotextile Waterproofing Systems with Cast-in-Place Concrete Below-Grade Foundation Construction
- ASTM-D88 - Standard Test Method for Saybolt Viscosity
- ASTM-E102 - Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
- ASTM-E1918 - Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
- ASTM-E1980 - Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
- ASTM-E2396 - Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
- ASTM-E2397 - Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
- ASTM-E2398 - Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
- ASTM-E2399 - Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
- ASTM-E2400 - Standard Guide for Selection, Installation, and Maintenance of Plants for Vegetative (Green) Roof Systems
- ASTM-E2777 - Standard Guide for Vegetative (Green) Roof Systems
- ASTM-E2788 - Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems
- ASTM-E907 - Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013)
- ASTM-E936 - Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)