05.04: Petroleum Products and Lubricants (IV): D6973 - latest
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D2623 - Methods for Knock Characteristics of Liquefied Petroleum (LP) Gases by the Motor (LP) Method (Withdrawn 1989)
- ASTM-D287 - Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
- ASTM-D3174 - Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
- ASTM-D3524 - Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
- ASTM-D6185 - Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
- ASTM-D6200 - Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
- ASTM-D6201 - Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
- ASTM-D6202 - Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009)
- ASTM-D6227 - Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
- ASTM-D6277 - Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
- ASTM-D6299 - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- ASTM-D6300 - Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
- ASTM-D6335 - Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
- ASTM-D6352 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
- ASTM-D6378 - Standard Test Method for Determination of Vapor Pressure (VP
X ) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) - ASTM-D6379 - Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- ASTM-D6417 - Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
- ASTM-D6421 - Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
- ASTM-D6424 - Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
- ASTM-D6425 - Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM-D6426 - Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
- ASTM-D6445 - Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)
- ASTM-D6469 - Standard Guide for Microbial Contamination in Fuels and Fuel Systems
- ASTM-D6470 - Standard Test Method for Salt in Crude Oils (Potentiometric Method)
- ASTM-D6482 - Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
- ASTM-D6483 - Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)
- ASTM-D6549 - Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
- ASTM-D6623 - Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography
- ASTM-D6973 - Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM-D6974 - Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
- ASTM-D6975 - Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019)
- ASTM-D6984 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
- ASTM-D6985 - Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010)
- ASTM-D6986 - Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ASTM-D6987 - Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)
- ASTM-D7038 - Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
- ASTM-D7039 - Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM-D7040 - Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-D7041 - Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
- ASTM-D7042 - Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- ASTM-D7043 - Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
- ASTM-D7044 - Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
- ASTM-D7058 - Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
- ASTM-D7059 - Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
- ASTM-D7060 - Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
- ASTM-D7061 - Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
- ASTM-D7094 - Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM-D7095 - Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
- ASTM-D7096 - Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
- ASTM-D7097 - Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
- ASTM-D7098 - Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM-D7109 - Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
- ASTM-D7110 - Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM-D7111 - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D7112 - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
- ASTM-D7152 - Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
- ASTM-D7153 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
- ASTM-D7154 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
- ASTM-D7155 - Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
- ASTM-D7156 - Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
- ASTM-D7157 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (
n -Heptane Phase Separation; Optical Detection) - ASTM-D7169 - Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
- ASTM-D7171 - Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
- ASTM-D7212 - Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
- ASTM-D7213 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM-D7214 - Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM-D7215 - Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
- ASTM-D7216 - Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
- ASTM-D7217 - Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D7220 - Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
- ASTM-D7223 - Standard Specification for Aviation Certification Turbine Fuel
- ASTM-D7224 - Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
- ASTM-D7235 - Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
- ASTM-D7236 - Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM-D7260 - Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
- ASTM-D7261 - Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
- ASTM-D7278 - Standard Guide for Prediction of Analyzer Sample System Lag Times
- ASTM-D7279 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- ASTM-D7280 - Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
- ASTM-D7303 - Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
- ASTM-D7317 - Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
- ASTM-D7318 - Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
- ASTM-D7319 - Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
- ASTM-D7320 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
- ASTM-D7321 - Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
- ASTM-D7328 - Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
- ASTM-D7342 - Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
- ASTM-D7343 - Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
- ASTM-D7344 - Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
- ASTM-D7345 - Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
- ASTM-D7346 - Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
- ASTM-D7347 - Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
- ASTM-D7371 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
- ASTM-D7372 - Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
- ASTM-D7373 - Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model (Withdrawn 2021)
- ASTM-D7397 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
- ASTM-D7398 - Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM-D7412 - Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-D7414 - Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-D7415 - Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-D7416 - Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
- ASTM-D7417 - Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
- ASTM-D7418 - Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
- ASTM-D7419 - Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
- ASTM-D7420 - Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D7421 - Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D7422 - Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
- ASTM-D7423 - Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
- ASTM-D7450 - Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
- ASTM-D7451 - Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
- ASTM-D7452 - Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
- ASTM-D7453 - Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
- ASTM-D7454 - Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
- ASTM-D7455 - Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
- ASTM-D7462 - Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) (Withdrawn 2016)
- ASTM-D7463 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
- ASTM-D7464 - Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
- ASTM-D7467 - Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
- ASTM-D7468 - Standard Test Method for Cummins ISM Test
- ASTM-D7482 - Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
- ASTM-D7483 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM-D7484 - Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
- ASTM-D7500 - Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
- ASTM-D7501 - Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
- ASTM-D7524 - Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
- ASTM-D7525 - Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
- ASTM-D7527 - Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
- ASTM-D7528 - Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
- ASTM-D7544 - Standard Specification for Pyrolysis Liquid Biofuel
- ASTM-D7545 - Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
- ASTM-D7546 - Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
- ASTM-D7547 - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
- ASTM-D7548 - Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM-D7549 - Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
- ASTM-D7563 - Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
- ASTM-D7566 - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- ASTM-D7576 - Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)
- ASTM-D7577 - Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
- ASTM-D7578 - Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
- ASTM-D7579 - Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM-D7589 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
- ASTM-D7590 - Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
- ASTM-D7591 - Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
- ASTM-D7592 - Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
- ASTM-D7593 - Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
- ASTM-D7594 - Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D7596 - Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM-D7603 - Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils (Withdrawn 2022)
- ASTM-D7618 - Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
- ASTM-D7619 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM-D7620 - Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
- ASTM-D7621 - Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
- ASTM-D7622 - Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
- ASTM-D7623 - Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
- ASTM-D7624 - Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-D7646 - Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
- ASTM-D7647 - Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
- ASTM-D7665 - Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
- ASTM-D7666 - Standard Specification for Triglyceride Burner Fuel
- ASTM-D7667 - Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
- ASTM-D7668 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
- ASTM-D7669 - Standard Guide for Practical Lubricant Condition Data Trend Analysis
- ASTM-D7670 - Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
- ASTM-D7671 - Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
- ASTM-D7683 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
- ASTM-D7684 - Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
- ASTM-D7685 - Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
- ASTM-D7686 - Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
- ASTM-D7687 - Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
- ASTM-D7688 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
- ASTM-D7689 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
- ASTM-D7690 - Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
- ASTM-D7691 - Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D7717 - Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
- ASTM-D7718 - Standard Practice for Obtaining In-Service Samples of Lubricating Grease
- ASTM-D7719 - Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
- ASTM-D7720 - Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
- ASTM-D7721 - Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
- ASTM-D7739 - Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
- ASTM-D7740 - Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
- ASTM-D7751 - Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
- ASTM-D7752 - Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
- ASTM-D7753 - Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
- ASTM-D7754 - Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
- ASTM-D7755 - Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D7756 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
- ASTM-D7757 - Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM-D7777 - Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
- ASTM-D7778 - Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM-D7794 - Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
- ASTM-D7795 - Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
- ASTM-D7796 - Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
- ASTM-D7797 - Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
- ASTM-D7798 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
- ASTM-D7806 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
- ASTM-D7807 - Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
- ASTM-D7808 - Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
- ASTM-D7825 - Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer
- ASTM-D7826 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- ASTM-D7827 - Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
- ASTM-D7828 - Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)
- ASTM-D7829 - Standard Guide for Sediment and Water Determination in Crude Oil
- ASTM-D7843 - Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
- ASTM-D7844 - Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-D7845 - Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
- ASTM-D7846 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
- ASTM-D7847 - Standard Guide for Interlaboratory Studies for Microbiological Test Methods
- ASTM-D7861 - Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
- ASTM-D7862 - Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
- ASTM-D7863 - Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
- ASTM-D7872 - Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
- ASTM-D7873 - Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
- ASTM-D7874 - Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
- ASTM-D7875 - Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
- ASTM-D7876 - Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
- ASTM-D7889 - Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
- ASTM-D7898 - Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
- ASTM-D7899 - Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
- ASTM-D7900 - Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
- ASTM-D7901 - Standard Specification for Dimethyl Ether for Fuel Purposes
- ASTM-D7915 - Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
- ASTM-D7917 - Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
- ASTM-D7918 - Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
- ASTM-D7919 - Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
- ASTM-D7920 - Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
- ASTM-D7922 - Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
- ASTM-D7923 - Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
- ASTM-D7945 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM-D7946 - Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
- ASTM-D7959 - Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
- ASTM-D7960 - Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
- ASTM-D7961 - Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
- ASTM-D7962 - Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
- ASTM-D7963 - Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
- ASTM-D7972 - Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
- ASTM-D7973 - Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
- ASTM-D7974 - Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
- ASTM-D7975 - Standard Test Method for Determination of Vapor Pressure of Crude Oil:
VPCR x -F(Tm°C) (Manual Expansion Field Method) - ASTM-D7978 - Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
- ASTM-D7994 - Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
- ASTM-D7995 - Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
- ASTM-D7996 - Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform
- ASTM-D8003 - Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
- ASTM-D8004 - Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
- ASTM-D8009 - Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
- ASTM-D8011 - Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
- ASTM-D8022 - Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
- ASTM-D8029 - Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
- ASTM-D8045 - Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
- ASTM-D8046 - Standard Guide for Pumpability of Heat Transfer Fluids
- ASTM-D8047 - Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
- ASTM-D8048 - Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
- ASTM-D8049 - Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM-D8056 - Standard Guide for Elemental Analysis of Crude Oil
- ASTM-D8070 - Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
- ASTM-D8071 - Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- ASTM-D8073 - Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
- ASTM-D8074 - Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- ASTM-D8076 - Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
- ASTM-D8092 - Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
- ASTM-D8094 - Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
- ASTM-D8110 - Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
- ASTM-D8111 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
- ASTM-D8112 - Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
- ASTM-D8114 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
- ASTM-D8126 - Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
- ASTM-D8128 - Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
- ASTM-E2412 - Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry