05.05: Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1025 - Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
- ASTM-C1039 - Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
- ASTM-C1179 - Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
- ASTM-C515 - Standard Specification for Chemical-Resistant Ceramic Tower Packings
- ASTM-C559 - Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
- ASTM-C560 - Standard Test Methods for Chemical Analysis of Graphite
- ASTM-C561 - Standard Test Method for Ash in a Graphite Sample
- ASTM-C562 - Standard Test Method for Moisture in a Graphite Sample
- ASTM-C565 - Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
- ASTM-C611 - Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
- ASTM-C625 - Standard Practice for Reporting Irradiation Results on Graphite
- ASTM-C651 - Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM-C662 - Standard Specification for Impervious Graphite Pipe and Threading
- ASTM-C695 - Standard Test Method for Compressive Strength of Carbon and Graphite
- ASTM-C709 - Standard Terminology Relating to Manufactured Carbon and Graphite (Withdrawn 2017)
- ASTM-C714 - Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
- ASTM-C747 - Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM-C748 - Standard Test Method for Rockwell Hardness of Graphite Materials
- ASTM-C749 - Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
- ASTM-C769 - Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
- ASTM-C781 - Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
- ASTM-C783 - Standard Practice for Core Sampling of Graphite Electrodes
- ASTM-C808 - Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM-C816 - Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method
- ASTM-C838 - Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
- ASTM-C886 - Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
- ASTM-D1145 - Test Method for Sampling Natural Gas (Withdrawn 1986)
- ASTM-D1247 - Method of Sampling Manufactured Gas (Withdrawn 1986)
- ASTM-D1321 - Standard Test Method for Needle Penetration of Petroleum Waxes
- ASTM-D1550 - Standard ASTM Butadiene Measurement Tables
- ASTM-D1833 - Standard Test Method for Odor of Petroleum Wax
- ASTM-D1977 - Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
- ASTM-D2423 - Standard Test Method for Surface Wax on Waxed Paper or Paperboard
- ASTM-D2534 - Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
- ASTM-D2669 - Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
- ASTM-D2699 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
- ASTM-D2700 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
- ASTM-D2712 - Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography
- ASTM-D2796 - Terminology Relating to Megascopic Description of Coal and Coal Seams and Microscopical Description and Analysis of Coal (Withdrawn 1995)
- ASTM-D2880 - Standard Specification for Gas Turbine Fuel Oils
- ASTM-D2881 - Standard Classification for Metalworking Fluids and Related Materials
- ASTM-D2885 - Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
- ASTM-D2962 - Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
- ASTM-D3235 - Standard Test Method for Solvent Extractables in Petroleum Waxes
- ASTM-D3521 - Standard Test Method for Surface Wax Coating On Corrugated Board
- ASTM-D3610 - Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
- ASTM-D3663 - Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM-D3766 - Standard Terminology Relating to Catalysts and Catalysis
- ASTM-D3827 - Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
- ASTM-D3906 - Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
- ASTM-D3907 - Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM-D3908 - Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
- ASTM-D3942 - Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
- ASTM-D3943 - Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
- ASTM-D3944 - Standard Test Method for Solidification Point of Petroleum Wax
- ASTM-D4058 - Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM-D410 - Method of Sieve Analysis of Coal (Withdrawn 1988)
- ASTM-D4164 - Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM-D4179 - Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM-D4180 - Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM-D4222 - Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
- ASTM-D4284 - Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- ASTM-D431 - Method for Designating the Size of Coal from its Sieve Analysis (Withdrawn 1988)
- ASTM-D4365 - Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- ASTM-D4418 - Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
- ASTM-D4438 - Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM-D4463 - Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
- ASTM-D4464 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
- ASTM-D4481 - Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
- ASTM-D4512 - Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM-D4513 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
- ASTM-D4567 - Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
- ASTM-D4641 - Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
- ASTM-D4642 - Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
- ASTM-D4699 - Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM-D4780 - Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
- ASTM-D4781 - Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM-D4782 - Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
- ASTM-D4824 - Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
- ASTM-D4857 - Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)
- ASTM-D4858 - Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines (Withdrawn 2022)
- ASTM-D4863 - Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022)
- ASTM-D4868 - Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
- ASTM-D4926 - Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
- ASTM-D5153 - Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
- ASTM-D5154 - Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM-D5357 - Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
- ASTM-D5757 - Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
- ASTM-D5758 - Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
- ASTM-D5842 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
- ASTM-D5854 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
- ASTM-D612 - Standard Test Method for Carbonizable Substances in Paraffin Wax
- ASTM-D613 - Standard Test Method for Cetane Number of Diesel Fuel Oil
- ASTM-D6158 - Standard Specification for Mineral Hydraulic Oils
- ASTM-D6175 - Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM-D6761 - Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM-D6822 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM-D6890 - Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- ASTM-D7084 - Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM-D7085 - Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
- ASTM-D7170 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019)
- ASTM-D7206 - Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM-D721 - Standard Test Method for Oil Content of Petroleum Waxes
- ASTM-D7219 - Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
- ASTM-D7223 - Standard Specification for Aviation Certification Turbine Fuel
- ASTM-D7301 - Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
- ASTM-D7342 - Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
- ASTM-D7416 - Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
- ASTM-D7417 - Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
- ASTM-D7442 - Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
- ASTM-D7542 - Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
- ASTM-D7596 - Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM-D7618 - Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
- ASTM-D7667 - Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
- ASTM-D7668 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
- ASTM-D7691 - Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D7718 - Standard Practice for Obtaining In-Service Samples of Lubricating Grease
- ASTM-D7756 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
- ASTM-D7757 - Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM-D7775 - Standard Guide for Measurements on Small Graphite Specimens
- ASTM-D7776 - Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017)
- ASTM-D7777 - Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
- ASTM-D7778 - Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM-D7779 - Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
- ASTM-D7794 - Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
- ASTM-D7795 - Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
- ASTM-D7796 - Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
- ASTM-D7797 - Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
- ASTM-D7798 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
- ASTM-D7806 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
- ASTM-D7807 - Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
- ASTM-D7808 - Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
- ASTM-D7825 - Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer
- ASTM-D7826 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- ASTM-D7827 - Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
- ASTM-D7828 - Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)
- ASTM-D7829 - Standard Guide for Sediment and Water Determination in Crude Oil
- ASTM-D7843 - Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
- ASTM-D7844 - Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-D7845 - Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
- ASTM-D7846 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
- ASTM-D7847 - Standard Guide for Interlaboratory Studies for Microbiological Test Methods
- ASTM-D7861 - Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
- ASTM-D7862 - Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
- ASTM-D7863 - Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
- ASTM-D7872 - Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
- ASTM-D7873 - Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
- ASTM-D7874 - Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
- ASTM-D7875 - Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
- ASTM-D7876 - Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
- ASTM-D7889 - Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
- ASTM-D7898 - Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
- ASTM-D7899 - Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
- ASTM-D7900 - Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
- ASTM-D7901 - Standard Specification for Dimethyl Ether for Fuel Purposes
- ASTM-D7915 - Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
- ASTM-D7917 - Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
- ASTM-D7918 - Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
- ASTM-D7919 - Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
- ASTM-D7920 - Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
- ASTM-D7922 - Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
- ASTM-D7923 - Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
- ASTM-D7945 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- ASTM-D7946 - Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
- ASTM-D7959 - Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
- ASTM-D7960 - Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
- ASTM-D7961 - Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
- ASTM-D7962 - Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
- ASTM-D7963 - Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
- ASTM-D7964 - Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- ASTM-D7972 - Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
- ASTM-D7973 - Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
- ASTM-D7974 - Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
- ASTM-D7975 - Standard Test Method for Determination of Vapor Pressure of Crude Oil:
VPCR x -F(Tm°C) (Manual Expansion Field Method) - ASTM-D7978 - Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
- ASTM-D7994 - Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
- ASTM-D7996 - Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform (Withdrawn 2024)
- ASTM-D8003 - Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
- ASTM-D8004 - Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
- ASTM-D8009 - Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
- ASTM-D8011 - Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
- ASTM-D8022 - Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
- ASTM-D8029 - Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
- ASTM-D8045 - Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
- ASTM-D8046 - Standard Guide for Pumpability of Heat Transfer Fluids
- ASTM-D8047 - Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
- ASTM-D8048 - Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
- ASTM-D8049 - Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM-D8056 - Standard Guide for Elemental Analysis of Crude Oil
- ASTM-D8070 - Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
- ASTM-D8071 - Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- ASTM-D8072 - Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
- ASTM-D8073 - Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
- ASTM-D8074 - Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
- ASTM-D8075 - Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
- ASTM-D8076 - Standard Specification for 95, 98, and 100 Research Octane Number Test Fuels for Automotive Spark-Ignition Engines
- ASTM-D8091 - Standard Guide for Impregnation of Graphite with Molten Salt
- ASTM-D8092 - Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
- ASTM-D8093 - Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite
- ASTM-D8094 - Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
- ASTM-D8097 - Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
- ASTM-D8098 - Standard Test Method for Permanent Gases in C
2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector - ASTM-D8110 - Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
- ASTM-D8111 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
- ASTM-D8112 - Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
- ASTM-D8114 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
- ASTM-D8120 - Standard Test Method for Ferrous Debris Quantification
- ASTM-D8126 - Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
- ASTM-D8127 - Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
- ASTM-D8128 - Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
- ASTM-D8144 - Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
- ASTM-D8145 - Standard Practice for Sampling of Green Petroleum Coke
- ASTM-D8146 - Standard Guide for Evaluating Test Method Capability and Fitness for Use
- ASTM-D8147 - Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
- ASTM-D8148 - Standard Test Method for Spectroscopic Determination of Haze in Fuels
- ASTM-D8149 - Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
- ASTM-D8150 - Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
- ASTM-D8164 - Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
- ASTM-D8165 - Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
- ASTM-D8166 - Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
- ASTM-D8181 - Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
- ASTM-D8182 - Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
- ASTM-D8183 - Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
- ASTM-D8184 - Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
- ASTM-D8185 - Standard Guide for In-Service Lubricant Viscosity Measurement
- ASTM-D8186 - Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
- ASTM-D8194 - Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels
- ASTM-D8206 - Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)
- ASTM-D8210 - Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
- ASTM-D8211 - Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
- ASTM-D8226 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
- ASTM-D8227 - Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM-D8235 - Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
- ASTM-D8236 - Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
- ASTM-D8252 - Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
- ASTM-D8253 - Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy Method)
- ASTM-D8254 - Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
- ASTM-D8255 - Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens
- ASTM-D8256 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
- ASTM-D8267 - Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- ASTM-D8274 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
- ASTM-D8275 - Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
- ASTM-D8276 - Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry
- ASTM-D8277 - Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
- ASTM-D8278 - Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants
- ASTM-D8279 - Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
- ASTM-D8288 - Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine
- ASTM-D8289 - Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
- ASTM-D8290 - Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
- ASTM-D8291 - Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
- ASTM-D8302 - Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography
- ASTM-D8304 - Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids
- ASTM-D8305 - Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography
- ASTM-D8315 - Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry
- ASTM-D8316 - Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
- ASTM-D8317 - Standard Test Method for Measuring Friction and Wear Properties of Greases Under Rolling Motion Using SRV Test Machine
- ASTM-D8321 - Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
- ASTM-D8322 - Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)
- ASTM-D8323 - Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems
- ASTM-D8324 - Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit
- ASTM-D8325 - Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
- ASTM-D8340 - Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
- ASTM-D8350 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
- ASTM-D8351 - Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES)
- ASTM-D8356 - Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
- ASTM-D8368 - Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- ASTM-D8369 - Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
- ASTM-D8377 - Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
- ASTM-D8383 - Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
- ASTM-D8385 - Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
- ASTM-D8386 - Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT)
- ASTM-D8396 - Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID
- ASTM-D8412 - Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR)
- ASTM-D8420 - Standard Test Method for Wax Appearance Temperature and Wax Disappearance Temperature of Petroleum Products and Liquid Fuels
- ASTM-D8428 - Standard Guide for Establishing Analyst Competence to Perform a Test Method
- ASTM-D8434 - Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive
- ASTM-D8447 - Standard Test Method for Determination of Turbo Charger Deposits by Thermo-Oxidation Engine Oil Simulation Test
- ASTM-D8470 - Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
- ASTM-D8473 - Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
- ASTM-D8503 - Standard Test Method for Determining the Scuffing Temperature Limit of Lubricating Oils Using the SRV Test Machine
- ASTM-D8506 - Standard Guide for Microbial Contamination and Biodeterioration in Turbine Oils and Turbine Oil Systems
- ASTM-D8519 - Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- ASTM-D8544 - Standard Test Method for Determination of Conductive Deposits of Electrical and Mechanical Components from Fluids in Liquid and Vapor States within an Electrically Charged System
- ASTM-D8545 - Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N′-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography (HPLC)
- ASTM-D8562 - Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Steel Alloys Using a Silver Probe
- ASTM-D8563 - Standard Guide for Measurement of Gas Permeability and Gas Diffusivity of Carbon and Graphite
- ASTM-D8564 - Standard Test Method for Determination of Phenolic Antioxidants and Fuel System Icing Inhibitors in Aviation Turbine Fuels
- ASTM-D8576 - Standard Test Method for Measuring the Thread Length and Pull-off Force of a Lubricating Grease by using the Falex TAA Instrument
- ASTM-D8578 - Standard Test Method for Determination of Biodiesel and Hydrocarbon Types in Middle Distillate and Renewable Diesel Fuels by Supercritical Fluid Chromatography
- ASTM-D8579 - Standard Specification for Polyalkylene Glycol Lubricants Used in Gas Turbines
- ASTM-D87 - Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- ASTM-D909 - Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
- ASTM-D938 - Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
- ASTM-E2224 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM-E2412 - Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ASTM-F118 - Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022)