Document Center

11.02: Water (II)

ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.

Return to Section Index

The following documents are a part of this series:

• ASTM-D1141 - Standard Practice for the Preparation of Substitute Ocean Water
• ASTM-D1245 - Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
• ASTM-D1252 - Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
• ASTM-D1291 - Standard Practice for Estimation of Chlorine Demand of Water
• ASTM-D1782 - Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
• ASTM-D1783 - Standard Test Methods for Phenolic Compounds in Water
• ASTM-D1890 - Standard Test Method for Beta Particle Radioactivity of Water 
• ASTM-D1942 - Method of Test for Morpholine in Water
• ASTM-D1943 - Standard Test Method for Alpha Particle Radioactivity of Water 
• ASTM-D2035 - Standard Practice for Coagulation-Flocculation Jar Test of Water
• ASTM-D2036 - Standard Test Methods for Cyanides in Water
• ASTM-D2186 - Standard Test Methods for Deposit-Forming Impurities in Steam (Withdrawn 2014)
• ASTM-D2187 - Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
• ASTM-D2330 - Standard Test Method for Methylene Blue Active Substances
• ASTM-D2331 - Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
• ASTM-D2332 - Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
• ASTM-D2460 - Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022)
• ASTM-D2470 - Method of Measurement of Delayed Neutron-Emitting Fission Products in Nuclear Reactor Coolant Water During Reactor Operation (Withdrawn 1987)
• ASTM-D2577 - Method of Test for Radioactive Cesium in Water, Industrial Water and Industrial Waste Water (Withdrawn 1987)
• ASTM-D2579 - Standard Test Method for Total Organic Carbon in Water (Withdrawn 2002)
• ASTM-D2580 - Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021)
• ASTM-D2687 - Standard Practices for Sampling Particulate Ion-Exchange Materials
• ASTM-D2907 - Standard Test Methods for Microquantities of Uranium in Water by Fluorometry (Withdrawn 2003)
• ASTM-D2908 - Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
• ASTM-D2910 - Method for Removal of Organic Matter from Water by Activated Carbon Absorption (Withdrawn 1991)
• ASTM-D3084 - Standard Practice for Alpha-Particle Spectrometry of Water
• ASTM-D3086 - Test Method for Organochlorine Pesticides in Water (Withdrawn 1996)
• ASTM-D3087 - Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
• ASTM-D3113 - Standard Test Methods for Sodium Salts of EDTA in Water (Withdrawn 2005)
• ASTM-D3263 - Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits (Withdrawn 2008)
• ASTM-D3315 - Method of Test for Radioactive Zirconium in Water (Withdrawn 1987)
• ASTM-D3325 - Standard Practice for Preservation of Waterborne Oil Samples
• ASTM-D3326 - Standard Practice for Preparation of Samples for Identification of Waterborne Oils
• ASTM-D3328 - Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
• ASTM-D3352 - Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
• ASTM-D3371 - Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography (Withdrawn 2002)
• ASTM-D3375 - Standard Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
• ASTM-D3414 - Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy (Withdrawn 2018)
• ASTM-D3415 - Standard Practice for Identificaiton of Waterborne Oils
• ASTM-D3454 - Standard Test Method for Radium-226 in Water
• ASTM-D3483 - Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
• ASTM-D3534 - Standard Test Method for Polychlorinated Biphenyls (PCBs) in Water (Withdrawn 2004)
• ASTM-D3561 - Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
• ASTM-D3590 - Standard Test Methods for Total Kjeldahl Nitrogen in Water
• ASTM-D3648 - Standard Practices for the Measurement of Radioactivity (Withdrawn 2023)
• ASTM-D3649 - Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water (Withdrawn 2023)
• ASTM-D3650 - Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis (Withdrawn 2018)
• ASTM-D3651 - Standard Test Method for Barium in Brackish Water, Seawater, and Brines
• ASTM-D3694 - Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
• ASTM-D3695 - Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
• ASTM-D3731 - Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
• ASTM-D3739 - Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
• ASTM-D3861 - Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
• ASTM-D3862 - Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
• ASTM-D3863 - Standard Test Method for Retention Characteristics of 0.40 to 0.45 μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
• ASTM-D3865 - Standard Test Method for Plutonium in Water
• ASTM-D3868 - Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
• ASTM-D3869 - Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
• ASTM-D3870 - Standard Practice for Establishing Performance Characteristics for Colony Counting Methods in Microbiology (Withdrawn 2000)
• ASTM-D3871 - Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
• ASTM-D3875 - Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
• ASTM-D3921 - Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
• ASTM-D3923 - Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
• ASTM-D3972 - Standard Test Method for Isotopic Uranium in Water by Radiochemistry
• ASTM-D3973 - Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
• ASTM-D3974 - Standard Practices for Extraction of Trace Elements from Sediments
• ASTM-D3975 - Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
• ASTM-D3976 - Standard Practice for Preparation of Sediment Samples for Chemical Analysis
• ASTM-D3977 - Standard Test Methods for Determining Sediment Concentration in Water Samples
• ASTM-D3986 - Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
• ASTM-D4012 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
• ASTM-D4025 - Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
• ASTM-D4107 - Standard Test Method for Tritium in Drinking Water
• ASTM-D4128 - Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
• ASTM-D4129 - Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
• ASTM-D4130 - Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
• ASTM-D4131 - Standard Practice for Sampling Fish with Rotenone
• ASTM-D4132 - Standard Practice for Sampling Phytoplankton with Conical Tow Nets (Withdrawn 2020)
• ASTM-D4133 - Standard Practice for Sampling Phytoplankton with Pumps (Withdrawn 2020)
• ASTM-D4134 - Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler (Withdrawn 2020)
• ASTM-D4135 - Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers (Withdrawn 2020)
• ASTM-D4136 - Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles (Withdrawn 2020)
• ASTM-D4137 - Standard Practice for Preserving Phytoplankton Samples (Withdrawn 2020)
• ASTM-D4148 - Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method (Withdrawn 2020)
• ASTM-D4149 - Standard Classification for Sampling Phytoplankton in Surface Waters (Withdrawn 2020)
• ASTM-D4165 - Standard Test Method for Cyanogen Chloride in Water 
• ASTM-D4183 - Withdrawn 1994: Test Methods for Total Recoverable Phosphorus and Organic Phosphorus in Sediments
• ASTM-D4193 - Standard Test Method for Thiocyanate in Water
• ASTM-D4194 - Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
• ASTM-D4195 - Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application
• ASTM-D4196 - Standard Test Method for Confirming the Sterility of Membrane Filters
• ASTM-D4197 - Test Method for Percent Porosity of Membrane Filters (Withdrawn 1994)
• ASTM-D4198 - Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth 
• ASTM-D4199 - Standard Test Methods for Autoclavability of Membrane Filters (Withdrawn 2020)
• ASTM-D4200 - Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
• ASTM-D4201 - Standard Test Method for Coliphages in Water (Withdrawn 2005)
• ASTM-D4211 - Standard Guide for Fish Sampling
• ASTM-D4249 - Standard Test Method for Enumeration of Candida albicans in Water (Withdrawn 2013)
• ASTM-D4266 - Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
• ASTM-D4281 - Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination (Withdrawn 2012)
• ASTM-D4282 - Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
• ASTM-D4328 - Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
• ASTM-D4374 - Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate (Withdrawn 2013)
• ASTM-D4411 - Standard Guide for Sampling Fluvial Sediment in Motion
• ASTM-D4412 - Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
• ASTM-D4454 - Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy (Withdrawn 2015)
• ASTM-D4455 - Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure (Withdrawn 2019)
• ASTM-D4456 - Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
• ASTM-D4458 - Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
• ASTM-D4472 - Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems (Withdrawn 2023)
• ASTM-D4478 - Test Method for Oxygen Update (Withdrawn 1994)
• ASTM-D4489 - Standard Practices for Sampling of Waterborne Oils
• ASTM-D4515 - Standard Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents (Withdrawn 2006)
• ASTM-D4516 - Standard Practice for Standardizing Reverse Osmosis Performance Data
• ASTM-D4517 - Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
• ASTM-D4520 - Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
• ASTM-D4548 - Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
• ASTM-D4581 - Standard Guide for Measurement of Morphologic Characteristics of Surface Water Bodies (Withdrawn 2013)
• ASTM-D4582 - Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis (Withdrawn 2019)
• ASTM-D4657 - Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005)
• ASTM-D4692 - Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration
• ASTM-D4698 - Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
• ASTM-D4743 - Standard Test Method for Efficacy of Solvent Systems for Dissolving Water-Formed Deposits (Withdrawn 2003)
• ASTM-D4744 - Standard Test Method for Organic Halides in Water by Carbon Adsorption-Microcoulometric Detection (Withdrawn 2002)
• ASTM-D4763 - Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
• ASTM-D4785 - Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
• ASTM-D4822 - Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
• ASTM-D4823 - Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
• ASTM-D4839 - Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
• ASTM-D4922 - Standard Test Method for Determination of Radioactive Iron in Water
• ASTM-D4962 - Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
• ASTM-D4993 - Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis (Withdrawn 2023)
• ASTM-D4994 - Standard Practice for Recovery of Viruses from Wastewater Sludges
• ASTM-D5037 - Standard Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography (Withdrawn 2002)
• ASTM-D5042 - Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins (Withdrawn 2018)
• ASTM-D5072 - Standard Test Method for Radon in Drinking Water
• ASTM-D5073 - Standard Practice for Depth Measurement of Surface Water
• ASTM-D5074 - Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
• ASTM-D5090 - Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
• ASTM-D5091 - Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications (Withdrawn 2023)
• ASTM-D5131 - Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems (Withdrawn 2023)
• ASTM-D5174 - Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry (Withdrawn 2022)
• ASTM-D5175 - Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
• ASTM-D5176 - Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
• ASTM-D5217 - Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
• ASTM-D5241 - Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
• ASTM-D5244 - Standard Practice for Recovery of Enteroviruses from Waters (Withdrawn 2013)
• ASTM-D5245 - Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
• ASTM-D5246 - Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water
• ASTM-D5256 - Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
• ASTM-D5258 - Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
• ASTM-D5259 - Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
• ASTM-D5315 - Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
• ASTM-D5316 - Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
• ASTM-D5317 - Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
• ASTM-D5392 - Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure
• ASTM-D5411 - Standard Practice for Calculation of Average Energy Per Disintegration (E–) for a Mixture of Radionuclides in Reactor Coolant
• ASTM-D5412 - Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
• ASTM-D5413 - Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
• ASTM-D5462 - Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
• ASTM-D5465 - Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
• ASTM-D5475 - Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector (Withdrawn 2011)
• ASTM-D5613 - Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers (Withdrawn 2023)
• ASTM-D5614 - Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs (Withdrawn 2023)
• ASTM-D5615 - Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices
• ASTM-D5627 - Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
• ASTM-D5640 - Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water (Withdrawn 2023)
• ASTM-D5673 - Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
• ASTM-D5674 - Standard Guide for Operation of a Gaging Station
• ASTM-D5739 - Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
• ASTM-D5765 - Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
• ASTM-D5788 - Standard Guide for Spiking Organics into Aqueous Samples
• ASTM-D5789 - Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Organic Constituents (Withdrawn 2002)
• ASTM-D5790 - Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
• ASTM-D5811 - Standard Test Method for Strontium-90 in Water
• ASTM-D5812 - Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography (Withdrawn 2011)
• ASTM-D5847 - Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
• ASTM-D5904 - Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM-D5916 - Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
• ASTM-D6104 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
• ASTM-D6145 - Standard Guide for Monitoring Sediment in Watersheds
• ASTM-D6146 - Standard Guide for Monitoring Aqueous Nutrients in Watersheds
• ASTM-D6156 - Standard Practice for Use of Reversed-Phase High Performance Liquid Chromatographic Systems (Withdrawn 2007)
• ASTM-D6157 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
• ASTM-D6161 - Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
• ASTM-D6238 - Standard Test Method for Total Oxygen Demand in Water
• ASTM-D6239 - Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
• ASTM-D6302 - Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
• ASTM-D6303 - Standard Test Method for Formaldehyde in Water (Withdrawn 2007)
• ASTM-D6503 - Standard Test Method for Enterococci in Water Using Enterolert
• ASTM-D6508 - Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
• ASTM-D6520 - Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
• ASTM-D6529 - Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm
• ASTM-D6530 - Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
• ASTM-D6592 - Standard Test Method for Portable Chemiluminescent Water Quality Determination (Withdrawn 2010)
• ASTM-D6696 - Standard Guide for Understanding Cyanide Species
• ASTM-D6697 - Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water (Withdrawn 2010)
• ASTM-D6734 - Standard Test Method for Low Levels of Coliphages in Water (Withdrawn 2015)
• ASTM-D6800 - Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
• ASTM-D6807 - Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 μS/cm
• ASTM-D6850 - Standard Guide for QC of Screening Methods in Water
• ASTM-D6888 - Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM-D6889 - Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
• ASTM-D6908 - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
• ASTM-D6919 - Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
• ASTM-D6994 - Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
• ASTM-D7065 - Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
• ASTM-D7066 - Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
• ASTM-D7168 - Standard Test Method for ⁹⁹Tc in Water by Solid Phase Extraction Disk
• ASTM-D7237 - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM-D7282 - Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
• ASTM-D7283 - Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
• ASTM-D7284 - Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
• ASTM-D7285 - Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
• ASTM-D7316 - Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions (Withdrawn 2023)
• ASTM-D7362 - Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition (Withdrawn 2023)
• ASTM-D7363 - Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
• ASTM-D7365 - Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
• ASTM-D7485 - Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7511 - Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
• ASTM-D7513 - Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
• ASTM-D7535 - Standard Test Method for Lead-210 in Water
• ASTM-D7572 - Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
• ASTM-D7573 - Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
• ASTM-D7574 - Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7575 - Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
• ASTM-D7597 - Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7598 - Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7599 - Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7600 - Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM-D7601 - Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
• ASTM-D7644 - Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7645 - Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7678 - Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
• ASTM-D7727 - Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
• ASTM-D7728 - Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
• ASTM-D7730 - Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7731 - Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7742 - Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D7781 - Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
• ASTM-D7784 - Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
• ASTM-D7902 - Standard Terminology for Radiochemical Analyses
• ASTM-D7903 - Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
• ASTM-D7938 - Standard Practice for Sampling of C-14 in Gaseous Effluents
• ASTM-D7939 - Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water
• ASTM-D7979 - Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D8001 - Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
• ASTM-D8002 - Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
• ASTM-D8024 - Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
• ASTM-D8025 - Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
• ASTM-D8026 - Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
• ASTM-D8027 - Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
• ASTM-D8028 - Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
• ASTM-D8083 - Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
• ASTM-D8084 - Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
• ASTM-D8193 - Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
• ASTM-D8243 - Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
• ASTM-D8273 - Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction
• ASTM-D8293 - Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
• ASTM-D8294 - Standard Practice for Estimating pH to Verify Status of Aqueous Samples
• ASTM-D8332 - Standard Practice for Collection of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers
• ASTM-D8333 - Standard Practice for Preparation of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers Using Raman Spectroscopy, IR Spectroscopy, or Pyrolysis-GC/MS
• ASTM-D8421 - Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM-D8429 - Standard Test Method for Legionella pneumophila in Water Samples Using Legiolert
• ASTM-D8431 - Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
• ASTM-D8456 - Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
• ASTM-D8478 - Standard Test Method for N-Hexane Recoverable Total Oil and Grease and Total Petroleum Hydrocarbons in Water by ATR-Infrared Determination
• ASTM-D887 - Standard Practices for Sampling Water-Formed Deposits
• ASTM-D932 - Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
• ASTM-D933 - Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
• ASTM-D934 - Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022)
• ASTM-E1198 - Standard Practice for Sampling Zooplankton with Pumps
• ASTM-E1199 - Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
• ASTM-E1200 - Standard Practice for Preserving Zooplankton Samples
• ASTM-E1201 - Standard Practice for Sampling Zooplankton with Conical Tow Nets
• ASTM-F316 - Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
• ASTM-F488 - Standard Test Method for On-site Screening of Heterotrophic Bacteria in Water (Withdrawn 2004)
• ASTM-F60 - Methods for Detection and Enumeration of Microbiological Contaminants in Water Used for Processing Electron and Microelectronic Devices (Withdrawn 1991)
• ASTM-F838 - Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration