11.07: Atmospheric Analysis
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1356 - Standard Terminology Relating to Sampling and Analysis of Atmospheres
- ASTM-D1357 - Standard Practice for Planning the Sampling of the Ambient Atmosphere
- ASTM-D1607 - Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
- ASTM-D1608 - Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023)
- ASTM-D1739 - Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
- ASTM-D1914 - Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
- ASTM-D2010 - Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
- ASTM-D2913 - Standard Test Method for Mercaptan Content of the Atmosphere
- ASTM-D2914 - Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
- ASTM-D2986 - Standard Method for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
- ASTM-D3154 - Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
- ASTM-D3162 - Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
- ASTM-D3195 - Standard Practice for Rotameter Calibration
- ASTM-D3249 - Standard Practice for General Ambient Air Analyzer Procedures
- ASTM-D3266 - Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
- ASTM-D3267 - Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
- ASTM-D3268 - Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
- ASTM-D3269 - Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures) (Withdrawn 2010)
- ASTM-D3270 - Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
- ASTM-D3464 - Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
- ASTM-D3608 - Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
- ASTM-D3609 - Standard Practice for Calibration Techniques Using Permeation Tubes
- ASTM-D3614 - Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
- ASTM-D3631 - Standard Test Methods for Measuring Surface Atmospheric Pressure
- ASTM-D3670 - Standard Guide for Determination of Precision and Bias of Methods of Committee D22
- ASTM-D3685 - Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- ASTM-D3686 - Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
- ASTM-D3687 - Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
- ASTM-D3796 - Standard Practice for Calibration of Type S Pitot Tubes
- ASTM-D3824 - Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by Chemiluminescence
- ASTM-D4096 - Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
- ASTM-D4185 - Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
- ASTM-D4230 - Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
- ASTM-D4298 - Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
- ASTM-D4323 - Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
- ASTM-D4413 - Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) (Withdrawn 2014)
- ASTM-D4430 - Standard Practice for Determining the Operational Comparability of Meteorological Measurements
- ASTM-D4490 - Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
- ASTM-D4532 - Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
- ASTM-D4597 - Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM-D4599 - Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
- ASTM-D4600 - Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM-D4765 - Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
- ASTM-D4766 - Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
- ASTM-D4844 - Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection (Withdrawn 2025)
- ASTM-D4856 - Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
- ASTM-D4861 - Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
- ASTM-D4913 - Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023)
- ASTM-D4947 - Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air (Withdrawn 2011)
- ASTM-D5011 - Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
- ASTM-D5012 - Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
- ASTM-D5014 - Standard Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology) (Withdrawn 2006)
- ASTM-D5015 - Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
- ASTM-D5075 - Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM-D5085 - Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Suppressed Ion Chromatography
- ASTM-D5086 - Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
- ASTM-D5096 - Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
- ASTM-D5110 - Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
- ASTM-D5111 - Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
- ASTM-D5116 - Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
- ASTM-D5149 - Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
- ASTM-D5156 - Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM-D5157 - Standard Guide for Statistical Evaluation of Indoor Air Quality Models
- ASTM-D5197 - Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
- ASTM-D5280 - Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
- ASTM-D5281 - Standard Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres (Withdrawn 2014)
- ASTM-D5337 - Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps
- ASTM-D5366 - Standard Test Method for Determining the Dynamic Performance of a Wind Vane
- ASTM-D5438 - Standard Practice for Collection of Floor Dust for Chemical Analysis
- ASTM-D5466 - Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling, Mass Spectrometry Analysis Methodology)
- ASTM-D5527 - Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
- ASTM-D5578 - Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024)
- ASTM-D5741 - Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
- ASTM-D5755 - Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023)
- ASTM-D5756 - Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading (Withdrawn 2017)
- ASTM-D5791 - Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM-D5835 - Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
- ASTM-D5836 - Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
- ASTM-D5932 - Standard Test Method for Determination of 2,4-Toluene Di
iso cyanate (2,4-TDI) and 2,6-Toluene Diiso cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace - ASTM-D5952 - Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024)
- ASTM-D5953M - Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
- ASTM-D5955 - Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM (Withdrawn 2022)
- ASTM-D6011 - Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
- ASTM-D6056 - Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020)
- ASTM-D6057 - Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020)
- ASTM-D6058 - Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment (Withdrawn 2025)
- ASTM-D6059 - Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020)
- ASTM-D6060 - Standard Practice for Sampling of Process Vents with a Portable Gas Chromatograph
- ASTM-D6061 - Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
- ASTM-D6062 - Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
- ASTM-D6062M - Standard Guide for Personal Samplers of Health-Related Aerosol Fractions [Metric]
- ASTM-D6176 - Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
- ASTM-D6176M - Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
- ASTM-D6177 - Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
- ASTM-D6178 - Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
- ASTM-D6196 - Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air
- ASTM-D6209 - Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
- ASTM-D6216 - Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
- ASTM-D6245 - Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
- ASTM-D6246 - Standard Practice for Evaluating the Performance of Diffusive Samplers
- ASTM-D6271 - Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol (Withdrawn 2022)
- ASTM-D6281 - Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM-D6306 - Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
- ASTM-D6327 - Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
- ASTM-D6328 - Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
- ASTM-D6329 - Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
- ASTM-D6330 - Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
- ASTM-D6331 - Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
- ASTM-D6332 - Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
- ASTM-D6333 - Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
- ASTM-D6345 - Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air (Withdrawn 2018)
- ASTM-D6348 - Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
- ASTM-D6363 - Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
- ASTM-D6399 - Standard Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
- ASTM-D6420 - Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
- ASTM-D6480 - Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
- ASTM-D6485 - Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
- ASTM-D6494 - Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM-D6522 - Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
- ASTM-D6552 - Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
- ASTM-D6561 - Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
- ASTM-D6562 - Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
- ASTM-D6589 - Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
- ASTM-D6620 - Standard Practice for Asbestos Detection Limit Based on Counts
- ASTM-D6669 - Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
- ASTM-D6670 - Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
- ASTM-D6735 - Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method (Withdrawn 2018)
- ASTM-D6784 - Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
- ASTM-D6785 - Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
- ASTM-D6803 - Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Architectural Coatings Using Small-Scale Environmental Chambers
- ASTM-D6830 - Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
- ASTM-D6831 - Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- ASTM-D6832 - Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
- ASTM-D6877 - Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
- ASTM-D6966 - Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
- ASTM-D7034 - Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
- ASTM-D7035 - Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D7036 - Standard Practice for Competence of Air Emission Testing Bodies (Withdrawn 2025)
- ASTM-D7049 - Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
- ASTM-D7143 - Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
- ASTM-D7144 - Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids
- ASTM-D7145 - Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
- ASTM-D7200 - Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy (Withdrawn 2021)
- ASTM-D7201 - Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
- ASTM-D7202 - Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
- ASTM-D7295 - Standard Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide
- ASTM-D7296 - Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
- ASTM-D7297 - Standard Practice for Evaluating Residential Indoor Air Quality Concerns
- ASTM-D7338 - Standard Guide for Assessment Of Fungal Growth in Buildings
- ASTM-D7339 - Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
- ASTM-D7390 - Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
- ASTM-D7391 - Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
- ASTM-D7392 - Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
- ASTM-D7439 - Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
- ASTM-D7440 - Standard Practice for Characterizing Uncertainty in Air Quality Measurements
- ASTM-D7441 - Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples (Withdrawn 2018)
- ASTM-D7458 - Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection
- ASTM-D7459 - Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
- ASTM-D7520 - Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
- ASTM-D7521 - Standard Test Method for Determination of Asbestos in Soil
- ASTM-D7614 - Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
- ASTM-D7658 - Standard Test Method for Direct Microscopy of Fungal Structures from Tape
- ASTM-D7659 - Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
- ASTM-D7706 - Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
- ASTM-D7707 - Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
- ASTM-D7712 - Standard Terminology for Sampling and Analysis of Asbestos
- ASTM-D7773 - Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO
3 ) Using Filter Sampling and Suppressed Ion Chromatography - ASTM-D7788 - Standard Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology
- ASTM-D7789 - Standard Practice for Collection of Fungal Material from Surfaces by Swab
- ASTM-D7822 - Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
- ASTM-D7859 - Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
- ASTM-D7886 - Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
- ASTM-D7910 - Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
- ASTM-D7911 - Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
- ASTM-D7948 - Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
- ASTM-D8068 - Standard Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems
- ASTM-D8108 - Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
- ASTM-D8141 - Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
- ASTM-D8142 - Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
- ASTM-D8208 - Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
- ASTM-D8283 - Standard Practice for Cleaning and Certification of Specially Prepared Canisters
- ASTM-D8344 - Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids
- ASTM-D8345 - Standard Test Method for Determination of an Emission Parameter for Phthalate Esters and Other Non-Phthalate Plasticizers from Planar Polyvinyl Chloride Indoor Materials for Use in Mass Transfer Modeling Calculations
- ASTM-D8358 - Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
- ASTM-D8404 - Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
- ASTM-D8405 - Standard Test Method for Evaluating PM
2.5 Sensors or Sensor Systems Used in Indoor Air Applications - ASTM-D8406 - Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensor-based Instruments for Portable and Fixed-point Measurement
- ASTM-D8407 - Standard Guide for Measurement Techniques for Formaldehyde in Air
- ASTM-D8445 - Standard Practice for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation Samples in a Large-scale Ventilated Enclosure
- ASTM-D8446 - Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
- ASTM-D8457 - Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses
- ASTM-D8526 - Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient Atmospheres
- ASTM-D8559 - Standard Specification for Ambient Outdoor Air Quality Sensors and Sensor-Based Instruments for Portable and Fixed-Point Measurement
- ASTM-D8568 - Standard Test Method for Determination of Lead by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
- ASTM-D8570 - Standard Practice for Vented and Fugitive Gaseous Emissions Destruction by Thermal Oxidizer
- ASTM-D8591 - Standard Test Method for Determination of Fluorotelomer Alcohols in Test Chamber Air by Thermal Desorption-Gas Chromatography-Triple Quadrupole Tandem Mass Spectrometry (TD-GC-MS/MS)
- ASTM-E104 - Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
- ASTM-E1368 - Standard Practice for Visual Inspection of Asbestos Abatement Projects
- ASTM-E1370 - Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
- ASTM-E1494 - Standard Practice for Testing Physical Properties of Friable Surfacing Materials
- ASTM-E1553 - Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)
- ASTM-E1583 - Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
- ASTM-E1605 - Standard Terminology Relating to Lead in Buildings
- ASTM-E1613 - Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
- ASTM-E1644 - Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- ASTM-E1645 - Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
- ASTM-E1726 - Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
- ASTM-E1727 - Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
- ASTM-E1728 - Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
- ASTM-E1729 - Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
- ASTM-E1753 - Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
- ASTM-E1775 - Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM-E1792 - Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
- ASTM-E1795 - Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1796 - Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1797 - Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1908 - Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
- ASTM-E1979 - Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
- ASTM-E2115 - Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
- ASTM-E2119 - Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
- ASTM-E2120 - Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films (Withdrawn 2025)
- ASTM-E2239 - Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
- ASTM-E2252 - Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
- ASTM-E2255 - Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
- ASTM-E2271 - Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
- ASTM-E2356 - Standard Practice for Comprehensive Building Asbestos Surveys
- ASTM-E2394 - Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
- ASTM-E2913 - Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
- ASTM-E2914 - Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
- ASTM-E3074 - Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
- ASTM-E3193 - Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS)
- ASTM-E3203 - Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
- ASTM-E337 - Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
- ASTM-F1040 - Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable (Withdrawn 2012)
- ASTM-F1471 - Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System (Withdrawn 2018)
- ASTM-F778 - Standard Methods for Gas Flow Resistance Testing of Filtration Media