15.08: Sensory Evaluation; Vacuum Cleaners; Security Systems and Equipment; Detention and Correctional Facilities; Homeland Security Applications
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A627 - Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
- ASTM-A629 - Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications (Withdrawn 2004)
- ASTM-A750 - Standard Specification for Steel Air Ventilating Grille Units for Detention Areas (Withdrawn 2004)
- ASTM-E1075 - Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol
- ASTM-E1083 - Standard Test Method for Sensory Evaluation of Red Pepper Heat
- ASTM-E1207 - Standard Guide for Sensory Evaluation of Axillary Deodorancy
- ASTM-E1346 - Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation
- ASTM-E1395 - Standard Test Method for Sensory Evaluation of Low Heat Chilies
- ASTM-E1396 - Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
- ASTM-E1432 - Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of
Intermediate Size - ASTM-E1490 - Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions
- ASTM-E1593 - Standard Guide for Assessing the Efficacy of Consumer Products in Reducing the Perception of Malodor
- ASTM-E1627 - Standard Practice for Sensory Evaluation of Edible Oils and Fats
- ASTM-E1697 - Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
- ASTM-E1810 - Standard Guide for Evaluating Odor and Taste of Fish Suspected of Contamination
- ASTM-E1870 - Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
- ASTM-E1871 - Standard Guide for Serving Protocol for Sensory Evaluation of Foods and Beverages
- ASTM-E1879 - Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
- ASTM-E1885 - Standard Test Method for Sensory Analysis—Triangle Test
- ASTM-E1909 - Standard Guide for Time-Intensity Evaluation of Sensory Attributes
- ASTM-E1958 - Standard Guide for Sensory Claim Substantiation
- ASTM-E2049 - Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Hair-care Products by Trained Assessors
- ASTM-E2082 - Standard Guide for Descriptive Analysis of Shampoo Performance
- ASTM-E2139 - Standard Test Method for Same-Different Test
- ASTM-E2164 - Standard Test Method for Directional Difference Test
- ASTM-E2262 - Standard Practice for Estimating Thurstonian Discriminal Distances
- ASTM-E2263 - Standard Test Method for Paired Preference Test
- ASTM-E2299 - Standard Guide for Sensory Evaluation of Products by Children and Minors
- ASTM-E2346 - Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
- ASTM-E2411 - Standard Specification for Chemical Warfare Vapor Detector (CWVD)
- ASTM-E2413 - Standard Guide for Hospital Preparedness and Response (Withdrawn 2018)
- ASTM-E2414 - Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces (Withdrawn 2014)
- ASTM-E2454 - Standard Guide for Sensory Evaluation Methods to Determine Sensory Shelf Life of Consumer Products
- ASTM-E2458 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
- ASTM-E2520 - Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
- ASTM-E2521 - Standard Terminology for Evaluating Response Robot Capabilities
- ASTM-E253 - Standard Terminology Relating to Sensory Evaluation of Materials and Products
- ASTM-E2541 - Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets (Withdrawn 2019)
- ASTM-E2542 - Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
- ASTM-E2543 - Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
- ASTM-E2566 - Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
- ASTM-E2592 - Standard Practice for Evaluating Response Robot Capabilities: Logistics: Packaging for Urban Search and Rescue Task Force Equipment Caches
- ASTM-E2601 - Standard Practice for Radiological Emergency Response
- ASTM-E2609 - Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
- ASTM-E2610 - Standard Test Method for Sensory Analysis—Duo-Trio Test
- ASTM-E2639 - Standard Test Method for Blast Resistance of Trash Receptacles
- ASTM-E2640 - Standard Guide for Resource Management in Emergency Management and Homeland Security (Withdrawn 2019)
- ASTM-E2668 - Standard Guide for Emergency Operations Center (EOC) Development (Withdrawn 2019)
- ASTM-E2677 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
- ASTM-E2731 - Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event (Withdrawn 2018)
- ASTM-E2732 - Standard Practice for Responder Family Support Service
- ASTM-E2739 - Standard Specification for Personnel Decontamination System to be Used During a Chemical Event (Withdrawn 2019)
- ASTM-E2740 - Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
- ASTM-E2770 - Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins
- ASTM-E2771 - Standard Terminology for Homeland Security Applications
- ASTM-E2787 - Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-E2800 - Standard Practice for Characterization of
Bacillus Spore Suspensions for Reference Materials - ASTM-E2801 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps
- ASTM-E2802 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Hurdles
- ASTM-E2803 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Inclined Planes
- ASTM-E2804 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Stairs/Landings
- ASTM-E2805 - Standard Practice for Measurement of the Biological Activity of Ricin
- ASTM-E2826 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Continuous Pitch/Roll Ramps
- ASTM-E2827 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Crossing Pitch/Roll Ramps
- ASTM-E2828 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Symmetric Stepfields
- ASTM-E2829 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed
- ASTM-E2830 - Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds
- ASTM-E2831 - Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
- ASTM-E2838 - Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-E2842 - Standard Guide for Credentialing for Access to an Incident or Event Site
- ASTM-E2851 - Standard Specification for Ruggedness Requirements for HAZMAT Instrumentation
- ASTM-E2852 - Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
- ASTM-E2853 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain
- ASTM-E2854 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range
- ASTM-E2855 - Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range
- ASTM-E2866 - Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM-E2885 - Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
- ASTM-E2892 - Standard Test Method for Odor and Flavor Transfer From Materials in Contact With Municipal Drinking Water
- ASTM-E2902 - Standard Practice for Measurement of Body Armor Wearers (Withdrawn 2019)
- ASTM-E2915 - Standard Guide for Emergency Operations Center (EOC) Management
- ASTM-E2933 - Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications
- ASTM-E2943 - Standard Guide for Two-Sample Acceptance and Preference Testing with Consumers
- ASTM-E2950 - Standard Specification for Metal Canopy Systems
- ASTM-E2951 - Standard Guide for Community Emergency Preparedness for Persons with Disabilities
- ASTM-E2952 - Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)
- ASTM-E2978 - Standard Guide for Screening and Training of Assessors and a General Approach for the Sensory Evaluation of Toothpaste Appearance, Flavor, and Texture
- ASTM-E2991 - Standard Test Method for Evaluating Response Robot Mobility: Traverse Gravel Terrain
- ASTM-E2992 - Standard Test Method for Evaluating Response Robot Mobility: Traverse Sand Terrain
- ASTM-E3000 - Standard Guide for Measuring and Tracking Performance of Assessors on a Descriptive Sensory Panel
- ASTM-E3002 - Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
- ASTM-E3003 - Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
- ASTM-E3004 - Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
- ASTM-E3005 - Standard Terminology for Body Armor
- ASTM-E3009 - Standard Test Method for Sensory Analysis—Tetrad Test
- ASTM-E3041 - Standard Guide for Selecting and Using Scales for Sensory Evaluation
- ASTM-E3062 - Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items
- ASTM-E3068 - Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing
- ASTM-E3078 - Standard Practice for Conditioning of Hard Armor Test Items
- ASTM-E3086 - Standard Practice for Creating Appliques for Use in Testing of Nonplanar Soft Body Armor Designed for Females
- ASTM-E3095 - Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
- ASTM-E3107 - Standard Test Method for Resistance to Penetration and Backface Deformation for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM-E3108 - Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
- ASTM-E3109 - Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
- ASTM-E3110 - Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM-E3111 - Standard Test Method for Ballistic Resistant Head Protection
- ASTM-E3112 - Standard Test Method for Ballistic-resistant Products and Shoot Packs
- ASTM-E3113 - Standard Specification for Ballistic-resistant Vehicle Door Panels Used by Public Safety Agencies
- ASTM-E3131 - Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
- ASTM-E3132 - Standard Practice for Evaluating Response Robot Logistics: System Configuration
- ASTM-E3141 - Standard Test Method for Ballistic Resistant Shields for Law Enforcement
- ASTM-E3192 - Standard Practice for Soft Armor Conditioning by Tumbling
- ASTM-E3195 - Standard Guide for Body Armor Program Management
- ASTM-E3211 - Standard Practice for Selection, Integration, and Verification of Active Vehicle Barrier Safety Devices
- ASTM-E3212 - Standard Guide for Selection and Procurement of Protective Gloves Worn by Law Enforcement and Corrections
- ASTM-E3215 - Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
- ASTM-E3243 - Standard Specification for Field Detection Equipment and Assays Used for Fentanyl and Fentanyl-Related Compounds
- ASTM-E3289 - Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
- ASTM-E3290 - Standard Test Method for Establishing Performance of Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
- ASTM-E3350 - Standard Guide for Community Resilience Planning for Buildings and Infrastructure
- ASTM-E460 - Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
- ASTM-E544 - Standard Practice for Referencing Suprathreshold Odor Intensity
- ASTM-E619 - Standard Practice for Evaluating Foreign Odors in Paper Packaging
- ASTM-E679 - Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
- ASTM-E769 - Standard Test Methods for Odor of Methanol, Ethanol, n-Propanol, and Isopropanol
- ASTM-F1024 - Standard Specification for Dispensers, Rehydrated Mashed Potato (Withdrawn 2004)
- ASTM-F1029 - Standard Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004)
- ASTM-F1038 - Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
- ASTM-F1039 - Standard Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems (Withdrawn 2002)
- ASTM-F1090 - Standard Classification for Bank and Mercantile Vault Construction
- ASTM-F1156 - Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001)
- ASTM-F1157 - Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
- ASTM-F1158 - Standard Guide for Inspection and Evaluation of Tampering of Security Seals
- ASTM-F1233 - Standard Test Method for Security Glazing Materials And Systems
- ASTM-F1247 - Standard Specification for Intrusion Resistant Generic Vault Structures
- ASTM-F1284 - Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
- ASTM-F1326 - Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
- ASTM-F1334 - Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
- ASTM-F1409 - Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
- ASTM-F1410 - Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
- ASTM-F1411 - Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
- ASTM-F1448 - Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
- ASTM-F1450 - Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
- ASTM-F1465 - Standard Guide for Selection of Security Control Systems (Withdrawn 2012)
- ASTM-F1468 - Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
- ASTM-F1532 - Standard Guide for Qualification, Selection, Training, Utilization, and Supervision of Security Screening Personnel (Withdrawn 2001)
- ASTM-F1534 - Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
- ASTM-F1550 - Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
- ASTM-F1576 - Guide for Selection of Security Control Systems, Part II - Defining the Central Contol System (Withdrawn 1999)
- ASTM-F1577 - Standard Test Methods for Detention Locks for Swinging Doors
- ASTM-F1592 - Standard Test Methods for Detention Hollow Metal Vision Systems
- ASTM-F1601 - Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
- ASTM-F1641 - Standard Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor (Withdrawn 2004)
- ASTM-F1642 - Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
- ASTM-F1643 - Standard Test Methods for Detention Sliding Door Locking Device Assembly
- ASTM-F1692 - Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
- ASTM-F1699 - Standard Classification for Passive Fiber Optic Seals
- ASTM-F1758 - Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
- ASTM-F1870 - Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
- ASTM-F1915 - Standard Test Methods for Glazing for Detention Facilities
- ASTM-F1916 - Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008)
- ASTM-F1977 - Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
- ASTM-F2069 - Standard Practice for Evaluation of Explosives Vapor Detectors (Withdrawn 2009)
- ASTM-F2105 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
- ASTM-F2155 - Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
- ASTM-F2158 - Standard Specification for Residential Central-Vacuum Tube and Fittings
- ASTM-F2247 - Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
- ASTM-F2248 - Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
- ASTM-F2322 - Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
- ASTM-F2348 - Standard Performance Specification for Privacy Padlocks
- ASTM-F2401 - Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
- ASTM-F2542 - Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
- ASTM-F2544 - Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
- ASTM-F2607 - Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
- ASTM-F2608 - Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
- ASTM-F2609 - Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
- ASTM-F2647 - Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
- ASTM-F2656 - Standard Test Method for Crash Testing of Vehicle Security Barriers
- ASTM-F2697 - Standard Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities
- ASTM-F2756 - Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
- ASTM-F2766 - Standard Test Method for Boat Barriers
- ASTM-F2797 - Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
- ASTM-F2826 - Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
- ASTM-F2828 - Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
- ASTM-F2863 - Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions
- ASTM-F2912 - Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
- ASTM-F2927 - Standard Test Method for Door Systems Subject to Airblast Loadings
- ASTM-F2956 - Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems
- ASTM-F3006 - Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
- ASTM-F3007 - Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
- ASTM-F3016 - Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
- ASTM-F3020 - Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security
- ASTM-F3038 - Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
- ASTM-F3057 - Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
- ASTM-F3150 - Standard Specification for HEPA Filtration System Performance of Residential and Commercial Vacuum Cleaners
- ASTM-F3200 - Standard Terminology for Driverless Automatic Guided Industrial Vehicles
- ASTM-F3217 - Standard Guide for Security Fasteners
- ASTM-F3218 - Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
- ASTM-F3243 - Standard Practice for Implementing Communications Impairments on A-UGV Systems
- ASTM-F3244 - Standard Test Method for Navigation: Defined Area
- ASTM-F3265 - Standard Test Method for Grid-Video Obstacle Measurement
- ASTM-F3277 - Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
- ASTM-F3278 - Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security
- ASTM-F3296 - Standard Practice for Commercial Application of Electric Security Fences
- ASTM-F3297 - Standard Practice for Corrections Application for Non-Lethal Electric Security Fences
- ASTM-F3323 - Standard Terminology for Exoskeletons and Exosuits
- ASTM-F3327 - Standard Practice for Recording the A-UGV Test Configuration
- ASTM-F3356 - Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security
- ASTM-F3358 - Standard Practice for Labeling and Information for Exoskeletons
- ASTM-F3392 - Standard Practice for Exoskeleton Wearing, Care, and Maintenance Instructions
- ASTM-F3427 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
- ASTM-F3443 - Standard Practice for Load Handling When Using an Exoskeleton
- ASTM-F3474 - Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
- ASTM-F3499 - Standard Test Method for Confirming the Docking Performance of A-UGVs
- ASTM-F3517 - Standard Practice for Movement Tests When Using an Exoskeleton
- ASTM-F3518 - Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
- ASTM-F3519 - Standard Guide for Establishing a Reporting Structure for Exoskeleton Analysis
- ASTM-F3523 - Standard Test Method for Exoskeleton Use: Confined Space: Horizontal Movement
- ASTM-F3527 - Standard Guide for Assessing Risks Related to Implementation of Exoskeletons in Task-Specific Environments
- ASTM-F3528 - Standard Test Method for Exoskeleton Use: Gait
- ASTM-F3540 - Standard Guide for Hazards for Consideration when Designing Exoskeletons
- ASTM-F3561 - Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack
- ASTM-F3566 - Standard Performance Specifications and Test Methods for Walk-Through Metal Detectors Used in Safety and Security
- ASTM-F3576 - Standard Practice for Recording the Exoskeleton Test Configuration
- ASTM-F3578 - Standard Test Method for Evaluating Exoskeleton Fall Risk due to Stumbling
- ASTM-F3581 - Standard Test Method for Exoskeleton Use: Hurdles
- ASTM-F3582 - Standard Test Method for Exoskeleton Use: Gaps
- ASTM-F3583 - Standard Test Method for Exoskeleton Use: Beams
- ASTM-F3584 - Standard Test Method for Exoskeleton Use: Obstacle Avoidance: Walking
- ASTM-F3588 - Standard Guide for Set of Objects used with A-UGVs
- ASTM-F3613 - Standard Practice for Recording the Exoskeleton Fit to the User
- ASTM-F3614 - Standard Practice for Recording the Exoskeleton User Information
- ASTM-F395 - Standard Terminology Relating to Vacuum Cleaners
- ASTM-F420 - Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
- ASTM-F430 - Standard Specification for Paper Used for Vacuum Cleaner Filter Bags
- ASTM-F431 - Standard Specification for
Air Performance Measurement Plenum Chamber for Vacuum Cleaners - ASTM-F450 - Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
- ASTM-F471 - Standard Terminology Relating to Combination Locks
- ASTM-F476 - Standard Test Methods for Security of Swinging Door Assemblies
- ASTM-F486 - Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
- ASTM-F494 - Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
- ASTM-F555 - Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
- ASTM-F558 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
- ASTM-F571 - Standard Practice for Installation of Exit Devices in Security Areas
- ASTM-F572 - Practice for Application of Film Security Cameras in Financial Institutions (Withdrawn 2001)
- ASTM-F595 - Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic Hose)
- ASTM-F608 - Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
- ASTM-F655 - Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing (Withdrawn 2022)
- ASTM-F792 - Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
- ASTM-F820 - Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
- ASTM-F832 - Standard Classification for Security Seals
- ASTM-F883 - Standard Performance Specification for Padlocks
- ASTM-F884 - Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
- ASTM-F888 - Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt
Receptacle in a Vacuum Cleaner - ASTM-F922 - Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
- ASTM-F946 - Standard Guide for Establishing Security Seal Control and Accountability Procedures
- ASTM-F947 - Standard Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films (Withdrawn 2005)
- ASTM-F967 - Standard Practice for Security Engineering Symbols