15.10: Packaging; Flexible Barrier Packaging
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1029 - Standard Test Method for Peeling Resistance of Paper and Paperboard (Withdrawn 2001)
- ASTM-D1083 - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates (Withdrawn 2001)
- ASTM-D1185 - Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
- ASTM-D1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
- ASTM-D1596 - Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
- ASTM-D1874 - Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases (Withdrawn 2021)
- ASTM-D1968 - Standard Terminology Relating to Paper and Paper Products
- ASTM-D1974 - Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
- ASTM-D1975 - Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
- ASTM-D1994 - Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021)
- ASTM-D2063 - Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
- ASTM-D2221 - Standard Test Method for Creep Properties of Package Cushioning Materials
- ASTM-D2658 - Standard Test Method for Determining Dimensions of Fiberboard Boxes
- ASTM-D2860 - Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
- ASTM-D2979 - Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine (Withdrawn 2019)
- ASTM-D3060 - Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products (Withdrawn 2022)
- ASTM-D3061 - Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans (Withdrawn 2022)
- ASTM-D3064 - Standard Terminology Relating To Aerosol Products (Withdrawn 2022)
- ASTM-D3065 - Standard Test Methods for Flammability of Aerosol Products (Withdrawn 2022)
- ASTM-D3069 - Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022)
- ASTM-D3070 - Standard Practice for Rapid Pressure Determination of Pressurized Products
- ASTM-D3076 - Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers
- ASTM-D3078 - Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
- ASTM-D3079 - Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products (Withdrawn 2018)
- ASTM-D3089 - Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
- ASTM-D3090 - Standard Practice for Storage Testing of Aerosol Products
- ASTM-D3091 - Standard Practice for Safe Filling of Low-Pressure Pressurized Products
- ASTM-D3094 - Standard Practice for Seepage Rate of Aerosol Products
- ASTM-D3097 - Standard Test Method for Aerosol Products for Delivered Mass (Withdrawn 2003)
- ASTM-D3103 - Standard Test Method for Thermal Insulation Performance of Distribution Packages
- ASTM-D3111 - Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
- ASTM-D3121 - Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
- ASTM-D3198 - Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures (Withdrawn 2016)
- ASTM-D3330 - Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
- ASTM-D3332 - Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
- ASTM-D3469 - Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3470 - Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3472 - Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3474 - Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications
- ASTM-D3475 - Standard Classification of Child-Resistant Packages
- ASTM-D3481 - Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
- ASTM-D3580 - Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- ASTM-D3611 - Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
- ASTM-D3652 - Standard Test Method for Thickness of Pressure-Sensitive Tapes
- ASTM-D3652M - Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes [Metric] (Withdrawn 1998)
- ASTM-D3654 - Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
- ASTM-D3715 - Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
- ASTM-D3759 - Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
- ASTM-D3810 - Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3811 - Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
- ASTM-D3813 - Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
- ASTM-D3815 - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
- ASTM-D3816 - Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
- ASTM-D3833 - Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
- ASTM-D3889 - Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
- ASTM-D3890 - Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser
- ASTM-D3950 - Standard Specification for Strapping, Nonmetallic (and Joining Methods)
- ASTM-D3951 - Standard Practice for Commercial Packaging
- ASTM-D3953 - Standard Specification for Strapping, Flat Steel and Seals
- ASTM-D3968 - Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3985 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
- ASTM-D4003 - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
- ASTM-D4041 - Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
- ASTM-D4168 - Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
- ASTM-D4169 - Standard Practice for Performance Testing of Shipping Containers and Systems
- ASTM-D4267 - Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers (Withdrawn 2022)
- ASTM-D4279 - Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
- ASTM-D4332 - Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
- ASTM-D4333 - Standard Practice for Compatibility of Mechanical Pump Dispenser Components
- ASTM-D4334 - Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
- ASTM-D4335 - Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser
- ASTM-D4336 - Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
- ASTM-D4353 - Test Method for Basic Stability of a mechanical Pump Dispenser and Product (Withdrawn 1995)
- ASTM-D4497 - Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) (Withdrawn 2021)
- ASTM-D4498 - Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021)
- ASTM-D4499 - Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021)
- ASTM-D4504 - Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
- ASTM-D4577 - Standard Test Method for Compression Resistance of a Container Under Constant Load
- ASTM-D4649 - Standard Guide for Use of Stretch Films and Wrapping Application
- ASTM-D4675 - Standard Guide for Selection and Use of Flat Strapping Materials1
- ASTM-D4727 - Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
- ASTM-D4728 - Standard Test Method for Random Vibration Testing of Shipping Containers
- ASTM-D4774 - Standard Specification for User Applied Drug Labels in Anesthesiology (Withdrawn 2022)
- ASTM-D4775 - Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) (Withdrawn 2022)
- ASTM-D4919 - Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
- ASTM-D4991 - Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
- ASTM-D5022 - Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use (Withdrawn 2014)
- ASTM-D5077 - Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
- ASTM-D5094 - Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures (Withdrawn 2023)
- ASTM-D5105 - Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
- ASTM-D5112 - Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products
- ASTM-D5118 - Standard Practice for Fabrication of Fiberboard Shipping Boxes
- ASTM-D5168 - Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
- ASTM-D5264 - Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
- ASTM-D5265 - Standard Test Method for Bridge Impact Testing
- ASTM-D5276 - Standard Test Method for Drop Test of Loaded Containers by Free Fall
- ASTM-D5277 - Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
- ASTM-D5330 - Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
- ASTM-D5331 - Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
- ASTM-D5375 - Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
- ASTM-D5414 - Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM-D5415 - Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
- ASTM-D5416 - Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
- ASTM-D5445 - Standard Practice for Pictorial Markings for Handling of Goods
- ASTM-D5458 - Standard Test Method for Peel Cling of Stretch Wrap Film
- ASTM-D5459 - Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
- ASTM-D5486 - Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
- ASTM-D5487 - Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
- ASTM-D5570 - Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
- ASTM-D5571 - Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tight-head Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
- ASTM-D5639 - Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
- ASTM-D5663 - Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
- ASTM-D5728 - Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
- ASTM-D5748 - Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM-D5749 - Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
- ASTM-D5750 - Standard Guide for Width and Length of Pressure-Sensitive Tape
- ASTM-D5833 - Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
- ASTM-D5834 - Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004)
- ASTM-D6039 - Standard Specification for Open and Covered Wood Crates
- ASTM-D6055 - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
- ASTM-D6123 - Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
- ASTM-D6179 - Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
- ASTM-D6195 - Standard Test Methods for Loop Tack
- ASTM-D6198 - Standard Guide for Transport Packaging Design
- ASTM-D6199 - Standard Practice for Quality of Wood Members of Containers and Pallets
- ASTM-D6251 - Standard Specification for Wood-Cleated Panelboard Shipping Boxes
- ASTM-D6252 - Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
- ASTM-D6253 - Standard Practice for Treatment and/or Marking of Wood Packaging Materials
- ASTM-D6254 - Standard Specification for Wirebound Pallet-Type Wood Boxes
- ASTM-D6255 - Standard Specification for Steel or Aluminum Slotted Angle Crates
- ASTM-D6256 - Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
- ASTM-D6295 - Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
- ASTM-D6344 - Standard Test Method for Concentrated Impacts to Transport Packages
- ASTM-D6398 - Standard Practice to Enhance Identification of Drug Names on Labels (Withdrawn 2022)
- ASTM-D642 - Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
- ASTM-D6463 - Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
- ASTM-D6534 - Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
- ASTM-D6535 - Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM-D6536 - Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM-D6537 - Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
- ASTM-D6551 - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
- ASTM-D6573 - Standard Specification for General Purpose Wirebound Shipping Boxes
- ASTM-D6590 - Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
- ASTM-D6633 - Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser
- ASTM-D6653 - Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
- ASTM-D6654 - Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
- ASTM-D6655 - Standard Terminology Relating to Mechanical Pump Dispensers (Withdrawn 2016)
- ASTM-D6701 - Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
- ASTM-D6787 - Standard Specification for Repositionable Note Pad
- ASTM-D6788 - Standard Specification for Repositionable Pressure-Sensitive Flags
- ASTM-D6804 - Standard Guide for Hand Hole Design in Corrugated Boxes
- ASTM-D6834 - Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser (Withdrawn 2017)
- ASTM-D685 - Standard Practice for Conditioning Paper and Paper Products for Testing
- ASTM-D6880 - Standard Specification for Wood Boxes
- ASTM-D6881 - Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
- ASTM-D7030 - Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
- ASTM-D7077 - Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions (Withdrawn 2010)
- ASTM-D7257 - Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018)
- ASTM-D7298 - Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
- ASTM-D7386 - Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
- ASTM-D7387 - Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
- ASTM-D7434 - Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads (Withdrawn 2018)
- ASTM-D7435 - Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers (Withdrawn 2018)
- ASTM-D7478 - Standard Specification for Heavy Duty Sheathed Wood Crates
- ASTM-D7580 - Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads (Withdrawn 2018)
- ASTM-D7660 - Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
- ASTM-D7709 - Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
- ASTM-D775 - Method for Drop Test for Loaded Boxes (Withdrawn 1993)
- ASTM-D7790 - Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
- ASTM-D7860 - Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
- ASTM-D7887 - Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
- ASTM-D7932 - Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
- ASTM-D8134 - Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types
- ASTM-D8135 - Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
- ASTM-D8196 - Standard Practice for Determination of Water Activity (
a ) in Cannabis Flowerw - ASTM-D8197 - Standard Specification for Maintaining Acceptable Water Activity (
a ) Range (0.55 to 0.65) for Dry Cannabis Flower Intended for Human/Animal Usew - ASTM-D8205 - Standard Guide for Video Surveillance System
- ASTM-D8217 - Standard Guide for Access Control System
- ASTM-D8218 - Standard Guide for Intrusion Detection System (IDS)
- ASTM-D8219 - Standard Guide for Cleaning and Disinfection at a Cannabis Cultivation Center
- ASTM-D8220 - Standard Guide for Conducting Recall/Removal Procedures for Products in the Cannabis Industry
- ASTM-D8229 - Standard Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis Industry
- ASTM-D8233 - Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)
- ASTM-D8244 - Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry
- ASTM-D8245 - Standard Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products
- ASTM-D8250 - Standard Practice for Applying a Hazard Analysis Critical Control Points (HACCP) System for Cannabis Consumable Products
- ASTM-D8270 - Standard Terminology Relating to Cannabis
- ASTM-D8282 - Standard Practice for Laboratory Test Method Validation and Method Development
- ASTM-D8286 - Standard Guide for Processing Cannabis Product Complaints
- ASTM-D8308 - Standard Practice for Cannabis/Hemp Operation Compliance Audits
- ASTM-D8309 - Standard Guide for Stability Testing of Cannabis-Based Products
- ASTM-D8314 - Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
- ASTM-D8320 - Standard Practice for Implementing an Information Security Program in a Cannabis Operation
- ASTM-D8346 - Standard Guide for Certification Requirements for Quality Professional Vocations Within the Cannabis/Hemp Industry
- ASTM-D8347 - Standard Guide for Certification Requirements for Analytical Laboratory Professional Vocations Within the Cannabis Industry
- ASTM-D8348 - Standard Guide for Certification Requirements for Transportation and Logistics Related Vocations Within the Cannabis/Hemp Industry
- ASTM-D8357 - Standard Classification for Cannabis/Hemp Flower Vaporizers
- ASTM-D8372 - Standard Guide for Cannabis/Hemp Extract Vaporizers
- ASTM-D8373 - Standard Guide for Cannabis/Hemp Flower Vaporizers
- ASTM-D8374 - Standard Guide for Personal Cannabis/Hemp Plant Growing Appliances
- ASTM-D8375 - Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
- ASTM-D8376 - Standard Classification for Cannabis/Hemp Extract Vaporizers
- ASTM-D8390 - Standard Classification for Domestic Cannabis/Hemp Plant Indoor Growing Appliances
- ASTM-D8398 - Standard Practice for Management Responsibilities in Managing a Quality Management System (QMS)
- ASTM-D8399 - Standard Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS)
- ASTM-D8400 - Standard Guide for Assessing Spoilage of Hemp Seed Intended for Human Consumption
- ASTM-D8403 - Standard Practice for Certificate Programs within the Cannabis and Hemp Industries
- ASTM-D8409 - Standard Guide for Conducting Stacking Tests on UN Packagings Using Guided or Unguided Loads
- ASTM-D8410 - Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and Products for Compostability in Municipal or Industrial Aerobic Composting Facilities
- ASTM-D8417 - Standard Guide for Sampling of Hempseed Intended for Human Consumption
- ASTM-D8423 - Standard Specification for Environmental Conditions for Post-packaged Storage and Retail Merchandising of Cannabis/Hemp Flower
- ASTM-D8432 - Standard Specification for Environmental Conditions while In Transit for Packaged Cannabis/Hemp Flower
- ASTM-D8433 - Standard Specification for Food Safety and Quality of Hempseed Intended for Dehulling or Oil Extraction Food Purposes
- ASTM-D8439 - Standard Specification for Medicinal-use Cannabis Inflorescence
- ASTM-D8440 - Standard Specification for Food Safety and Quality of Hempseed Products Intended for Human Consumption
- ASTM-D8450 - Standard Specification for Environmental Conditions While Packaging Cannabis/Hemp Flower
- ASTM-D8452 - Standard Guide for Requirements for Medical-related Professionals within the Cannabis and Hemp Industries
- ASTM-D8465 - Standard Guide for Whole Hemp Seed Storage at Primary Production Facilities
- ASTM-D8469 - Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
- ASTM-D8477 - Standard Practice for Cannabis or Hemp Supplier Lifecycle Management
- ASTM-D8493 - Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
- ASTM-D880 - Standard Test Method for Impact Testing for Shipping Containers and Systems
- ASTM-D951 - Standard Test Method for Water Resistance of Shipping Containers by Spray Method
- ASTM-D959 - Method of Drop Test for Filled Bags (Withdrawn 1993)
- ASTM-D996 - Standard Terminology of Packaging and Distribution Environments
- ASTM-D999 - Standard Test Methods for Vibration Testing of Shipping Containers
- ASTM-E171 - Standard Practice for Conditioning and Testing Flexible Barrier Packaging
- ASTM-E398 - Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
- ASTM-F1115 - Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
- ASTM-F1140 - Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
- ASTM-F1168 - Guide for Use in the Establishment of Thermal Processes for Foods Packaged in Flexible Containers (Withdrawn 2000)
- ASTM-F119 - Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
- ASTM-F1249 - Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
- ASTM-F1278 - Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
- ASTM-F1306 - Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
- ASTM-F1307 - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
- ASTM-F1308 - Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
- ASTM-F1317 - Standard Test Method for Calibration of Microwave Ovens
- ASTM-F1327 - Standard Terminology Relating to Barrier Materials for Medical Packaging (Withdrawn 2007)
- ASTM-F1349 - Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
- ASTM-F1416 - Standard Guide for Selection of Time-Temperature Indicators
- ASTM-F1479 - Standard Terminology Relating to Microwave Food Packaging (Withdrawn 2007)
- ASTM-F1500 - Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
- ASTM-F151 - Standard Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004)
- ASTM-F1519 - Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
- ASTM-F1585 - Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006)
- ASTM-F1608 - Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
- ASTM-F17 - Standard Terminology Relating to Primary Barrier Packaging
- ASTM-F1769 - Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
- ASTM-F1770 - Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)
- ASTM-F1884 - Standard Test Methods for Determining Residual Solvents in Packaging Materials
- ASTM-F1886 - Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
- ASTM-F1921 - Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
- ASTM-F1927 - Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
- ASTM-F1929 - Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
- ASTM-F1980 - Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices
- ASTM-F2013 - Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
- ASTM-F2029 - Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
- ASTM-F2054 - Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
- ASTM-F2095 - Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
- ASTM-F2096 - Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
- ASTM-F2097 - Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
- ASTM-F2203 - Standard Test Method for Linear Measurement Using Precision Steel Rule
- ASTM-F2217 - Standard Practice for Coating/Adhesive Weight Determination
- ASTM-F2227 - Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method
- ASTM-F2228 - Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
- ASTM-F2250 - Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
- ASTM-F2251 - Standard Test Method for Thickness Measurement of Flexible Packaging Material
- ASTM-F2252 - Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
- ASTM-F2338 - Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
- ASTM-F2391 - Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
- ASTM-F2475 - Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
- ASTM-F2476 - Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using An Infrared Detector
- ASTM-F2559 - Standard Guide for Writing a Specification for Sterilizable Peel Pouches
- ASTM-F2622 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
- ASTM-F2638 - Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
- ASTM-F2714 - Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
- ASTM-F2824 - Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
- ASTM-F2825 - Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
- ASTM-F2981 - Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
- ASTM-F3004 - Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
- ASTM-F3039 - Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
- ASTM-F3136 - Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
- ASTM-F3169 - Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
- ASTM-F3263 - Standard Guide for Packaging Test Method Validation
- ASTM-F3287 - Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
- ASTM-F3300 - Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
- ASTM-F3375 - Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
- ASTM-F34 - Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
- ASTM-F372 - Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009)
- ASTM-F392 - Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
- ASTM-F874 - Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
- ASTM-F88 - Standard Test Method for Seal Strength of Flexible Barrier Materials
- ASTM-F904 - Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
- ASTM-F99 - Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials