Document Center List of Standards on Graphical Symbols For Use On Mechanical Engineering And Construction Drawings, Diagrams, Plans, Maps And In Relevant Technical Product Documentation Standards Included In This Group Shall Also Be Included In Other Groups And/Or Sub-Groups According To Their Subject
ICS Code 01.080.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-2917 - Specification for graphical symbols used on diagrams for fluid power systems and components
- BS-2917-1 - Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols
- BS-3502-2 - Symbols for plastics and rubber materialsSchedule for symbols for rubbers
- BS-3502-3 - Symbols for plastics and rubber materials. Schedule for symbols for compounding ingredients
- BS-3553 - Specification for graphical symbols for coal preparation plant flowsheets
- BS-4589 - Abbreviations for rubber and plastics compounding materials
- BS-499-2 - Welding Terms & Symbols, Specification for Symbols for Welding
- BS-499-2C - Welding terms and symbols. European arc welding symbols in chart form
- BS-5543 - Vacuum technology - graphical symbols
- BS-8541-2-CD - Library objects for architecture, engineering and construction
- BS-AU-229 - Specification for Graphical Symbols To Designate Brake Fluid Types in Road Vehicles
- BS-EN-14665 - Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
- BS-EN-15429-4 - Sweepers
- BS-EN-22553 - Welded, Brazed & Soldered Joints - Symbolic Representation on Drawings
- BS-EN-61355-1 - Classification and designation of documents for plants, systems and equipment
- BS-EN-ISO-10628-2 - Diagrams for the chemical and petrochemical industry
- BS-EN-ISO-12671 - Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
- BS-EN-ISO-2692 - Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- BS-EN-ISO-5261 - Technical drawings. Simplified representation of bars and profile sections
- BS-ISO-1219-1 - Fluid power systems and components. Graphical symbols and circuit diagrams
- BS-ISO-1219-2 - Fluid power systems and components. Graphical symbols and circuit diagrams
- BS-ISO-1219-3 - Fluid power systems and components. Graphical symbols and circuit diagrams
- BS-ISO-12671 - Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
- BS-ISO-14084-1 - Process diagrams for power plants
- BS-ISO-14084-2 - Process diagrams for power plants
- BS-ISO-14617-10 - Graphical symbols for diagrams. Fluid power converters
- BS-ISO-14617-4 - Graphical symbols for diagrams
- BS-ISO-14617-7 - Graphical symbols for diagrams. Basic mechanical components
- BS-ISO-14617-9 - Graphical symbols for diagrams. Pumps, compressors and fans
- BS-ISO-15081 - Agricultural equipment. Graphical symbols for pressurized irrigation systems
- BS-ISO-15519-1 - Specification for diagrams for process industry
- BS-ISO-15519-2 - Specifications for diagrams for process industry
- BS-ISO-17338 - Ships and marine technology. Drawings for fire protection. Indications of fire rating by divisions for ships and high-speed craft
- BS-ISO-19018 - Ships and marine technology. Terms, abbreviations, graphical symbols and concepts on navigation
- BS-ISO-5859 - Aerospace series. Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
- PD-IEC-61734 - Application of symbols for binary logic and analogue elements
IEC:
- IEC-60617-12 - Graphical Symbols for Diagrams - Part 12: Binary Logic Elements
- IEC-61355 - Classification & Designation of Documents for Plants, Systems & Equipment
- IEC-61355-1 - Classification and designation of documents for plants, systems and equipment - Part 1: Rules and classification tables
- IEC-61666 - Industrial systems, installations and equipment and industrial products - Identification of terminals within a system
- IEC-61666-AM1 - Amendment 1 - Industrial systems, installations and equipment and industrial products - Identification of terminals within a system
- IEC-61734 - Application of symbols for binary logic and analogue elements
ISO:
- ISO-10628 - Flow diagrams for process plants -- General rules
- ISO-10628-2 - Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols
- ISO-1219-1 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications
- ISO-1219-1-AM1 - - Amendment 1
- ISO-1219-2 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams
- ISO-1219-3 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams
- ISO-12671 - Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
- ISO-14084-1 - Process diagrams for power plants - Part 1: Specification for diagrams
- ISO-14084-2 - Process diagrams for power plants - Part 2: Graphical symbols
- ISO-14617-1 - Graphical symbols for diagrams - Part 1: General information and indexes
- ISO-14617-10 - Graphical symbols for diagrams - Part 10: Fluid power converters
- ISO-14617-11 - Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines
- ISO-14617-12 - Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing
- ISO-14617-13 - Graphical symbols for diagrams - Part 13: Devices for material processing
- ISO-14617-14 - Graphical symbols for diagrams - Part 14: Devices for transport and handling of material
- ISO-14617-15 - Graphical symbols for diagrams - Part 15: Installation diagrams and network maps
- ISO-14617-2 - Graphical symbols for diagrams - Part 2: Symbols having general application
- ISO-14617-3 - Graphical symbols for diagrams - Part 3: Connections and related devices
- ISO-14617-4 - Graphical symbols for diagrams - Part 4: Actuators and related devices
- ISO-14617-5 - Graphical symbols for diagrams - Part 5: Measurement and control devices
- ISO-14617-6 - Graphical symbols for diagrams - Part 6: Measurement and control functions
- ISO-14617-7 - Graphical symbols for diagrams - Part 7: Basic mechanical components
- ISO-14617-8 - Graphical symbols for diagrams - Part 8: Valves and dampers
- ISO-14617-9 - Graphical symbols for diagrams - Part 9: Pumps, compressors and fans
- ISO-15081 - Agricultural equipment - Graphical symbols for pressurized irrigation systems
- ISO-15519-1 - Specification for diagrams for process industry - Part 1: General rules
- ISO-15519-2 - Specifications for diagrams for process industry - Part 2: Measurement and control
- ISO-17338 - Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft
- ISO-19018 - Ships and marine technology - Terms, abbreviations, graphical symbols and concepts on navigation
- ISO-1964 - Shipbuilding -- Indication of details on the general arrangement plans of ships
- ISO-3511-1 - Process measurement control functions and instrumentation - Symbolic representation - Part 1: Basic requirements
- ISO-3511-2 - Process measurement control functions and instrumentation - Symbolic representation - Part 2 : Extension of basic requirements
- ISO-3511-3 - Process measurement control functions and instrumentation - Symbolic representation - Part 3 : Detailed symbols for instrument interconnection diagrams
- ISO-3511-4 - Industrial process measurement control functions and instrumentation - Symbolic representation - Part 4 : Basic symbols for process computer, interface, and shared display/control functions
- ISO-3952-1 - Kinematic diagrams - Graphical symbols - Part 1
- ISO-3952-1-1 - Kinematic diagrams - Graphical symbols - Amendment 1
- ISO-3952-2 - Kinematic diagrams - Graphical symbols - Part 2
- ISO-3952-3 - Kinematic diagrams - Graphical symbols - Part 3
- ISO-3952-4 - Kinematic diagrams - Graphical symbols - Part 4
- ISO-4067-1 - Technical drawings -- Installations -- Part 1 : Graphical symbols for plumbing, heating, ventilation and ducting
- ISO-4067-2 - Building and civil engineering drawings -- Installations -- Part 2 : Simplified representation of sanitary appliances
- ISO-4067-6 - Technical drawings -- Installations -- Part 6 : Graphical symbols for supply water and drainage systems in the ground
- ISO-5232 - Graphical symbols for textile machinery
- ISO-538 - Conventional signs to be used in the schemes for the installations of pipeline systems in ships
- ISO-561 - Coal preparation plant -- Graphical symbols
- ISO-5784-1 - Fluid power systems and components -- Fluid logic circuits -- Part 1 : Symbols for binary logic and related functions
- ISO-5784-2 - Fluid power systems and components -- Fluid logic circuits -- Part 2: Symbols for supply and exhausts as related to logic symbols
- ISO-5784-3 - Fluid power systems and components -- Fluid logic circuits -- Part 3: Symbols for logic sequencers and related functions
- ISO-5859 - Aerospace series - Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
- ISO-644 - Conventional signs to be used in schemes for the installations of ventilation systems in ships
- ISO-6790 - Equipment for fire protection and fire fighting - Graphical symbols for fire protection plans - Specification
- ISO-701 - International gear notation - Symbols for geometrical data
- ISO-710-1 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 1: General rules of representation
- ISO-710-2 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 2: Representation of sedimentary rocks
- ISO-710-3 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 3: Representation of magmatic rocks
- ISO-710-4 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 4 : Representation of metamorphic rocks
- ISO-710-5 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 5: Representation of minerals
- ISO-710-6 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 6 : Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
- ISO-710-7 - Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 7 : Tectonic symbols
- ISO-784 - Conventional signs to be used in schemes for the installations of sanitary systems in ships
- ISO-9878 - Micrographics -- Graphical symbols for use in microfilming
Other SDOs:
- DIN-EN-14665 - Thermal spraying - Thermal sprayed coatings - Symbolic representation on drawings; German version EN 14665:2004
- DIN-EN-ISO-12671 - Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012)
- EN-14665 - Thermal Spraying, Thermally Sprayed Coatings, Symbolic Representation on Drawings
- EN-15429-4 - Sweepers - Part 4: Symbols for operator controls and other displays
- EN-61355-1 - Classification & Designation of Documents for Plants, Systems & Equipment, Rules & Cla
- EN-ISO-10628-2 - Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols (ISO 10628-2:2012)
- EN-ISO-12671 - Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012)
- EN-ISO-2692 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- JIS-B-0121 - International gear notation -- Symbols for geometrical data
- JIS-B-0125-1 - Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 1: Graphic symbols for conventional use and data processing applications
- JIS-B-0125-2 - Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 2: Circuit diagrams
- JIS-C-0617-2 - Graphical symbols for diagrams -- Part 2: Symbol elements, qualifying symbols and other symbols having general application
- SS-EN-12526 - Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary
- SS-EN-14665 - Thermal spraying - Thermal sprayed coatings - Symbolic representation on drawings
- SS-EN-15429-4 - Sweepers - Part 4: Symbols for operator controls and other displays
- SS-EN-1861 - Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols
- SS-EN-22553 - Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992, IDT)
- SS-EN-ISO-10628 - Flow diagrams for process plants - General rules (ISO 10628:1997)
- SS-EN-ISO-10628-1 - Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014)
- SS-EN-ISO-10628-2 - Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols (ISO 10628-2:2012)
- SS-EN-ISO-11145 - Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2018)
- SS-EN-ISO-12671 - Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2021)
- SS-EN-ISO-2553 - Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09)
- SS-EN-ISO-3952-1 - Kinematic diagrams - Graphical symbols - Part 1 (ISO 3952-1:1981)
- SS-EN-ISO-3952-1-AM1 - Kinematic diagrams - Graphical symbols - Part 1: Amendment 1 (ISO 3952-1:1981/Amd 1:2002)
- SS-EN-ISO-3952-2 - Kinematic diagrams - Graphical symbols - Part 2 (ISO 3952-2:1994)
- SS-EN-ISO-3952-3 - Kinematic diagrams - Graphical symbols - Part 3 (ISO 3952-3:1979)
- SS-EN-ISO-5261 - Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995)
- SS-EN-ISO-7083 - Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)
- SS-ISO-10628 - Flow diagrams for process plants - General rules
- SS-ISO-1101 - Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- SS-ISO-1219-1 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications (ISO 1219-1:2012, IDT)
- SS-ISO-1219-1-AM1 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications - Amendment 1 (ISO 1219-1:2012/Amd 1:2016, IDT)
- SS-ISO-1219-2 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:2012, IDT)
- SS-ISO-1219-3 - Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams (ISO 1219-3:2016, IDT)
- SS-ISO-14084-1 - Process diagrams for power plants - Part 1: Specification for diagrams (ISO 14084-1:2015, IDT)
- SS-ISO-14084-2 - Process diagrams for power plants - Part 2: Graphical symbols (ISO 14084-2:2015, IDT)
- SS-ISO-14617-1 - Graphical symbols for diagrams - Part 1: General information and indexes (ISO 14617-1:2005, IDT)
- SS-ISO-14617-10 - Graphical symbols for diagrams - Part 10: Fluid power converters
- SS-ISO-14617-11 - Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines
- SS-ISO-14617-12 - Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing
- SS-ISO-14617-13 - Graphical symbols for diagrams - Part 13: Devices for material processing (ISO 14617-13:2004, IDT)
- SS-ISO-14617-14 - Graphical symbols for diagrams - Part 14: Devices for transport and handling of material (ISO 14617-14:2004, IDT)
- SS-ISO-14617-15 - Graphical symbols for diagrams - Part 15: Installation diagrams and network maps
- SS-ISO-14617-2 - Graphical symbols for diagrams - Part 2: Symbols having general application
- SS-ISO-14617-3 - Graphical symbols for diagrams - Part 3: Connections and related devices
- SS-ISO-14617-4 - Graphical symbols for diagrams - Part 4: Actuators and related devices
- SS-ISO-14617-5 - Graphical symbols for diagrams - Part 5: Measurement and control devices
- SS-ISO-14617-6 - Graphical symbols for diagrams - Part 6: Measurement and control functions
- SS-ISO-14617-7 - Graphical symbols for diagrams - Part 7: Basic mechanical components
- SS-ISO-14617-8 - Graphical symbols for diagrams - Part 8: Valves and dampers
- SS-ISO-14617-9 - Graphical symbols for diagrams - Part 9: Pumps, compressors and fans
- SS-ISO-15519-1 - Specification for diagrams for process industry - Part 1: General rules (ISO 15519-1:2010, IDT)
- SS-ISO-15519-2 - Specifications for diagrams for process industry - Part 2: Measurement and control (ISO 15519-2:2015, IDT)
- SS-ISO-2553 - Welded, brazed and soldered joints - Symbolic representation on drawings
- SS-ISO-3511-1 - Process measurement control functions and instrumentation - Symbolic representation - Part 1: Basicrequirements
- SS-ISO-3511-2 - Process measurement control functions and instrumentation - Symbolic representation - Part 2: Extensions of basic requirements
- SS-ISO-3511-3 - Process measurement control functions and instrumentation - Symbolic representation - Part 3: Detailed symbols for instrument interconnection diagrams
- SS-ISO-3511-4 - Industrial process measurement control functions and instrumentation - Symbolic representation - Part 4: Basic symbols for process computer, interface, and shared display/control functions
- SS-ISO-4063 - Welding, brazing, soldering and braze welding of metals - Nomenclature of processes and reference numbers for symbolic representation on drawings
- SS-ISO-5261 - Technical drawings - Simplified representation ofbars and profile sections
- SS-ISO-5807 - Information processing - Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
- SS-ISO-7083 - Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
- SS-ISO-8790 - Information processing systems - Computer system configuration diagram symbols and conventions
- SS-ISO/IEC-11714-1 - Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules