Document Center List of Standards on Mechanical Engineering Drawings
ICS Code 01.100.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-308-1 - Engineering drawing practice. Recommendations for general principles
- BS-308-2 - Engineering drawing practice. Recommendations for dimensioning and tolerancing of size
- BS-308-3 - Engineering drawing practice. Recommendations for geometrical tolerancing
- BS-4301 - Recommendations for preparation of drawings for optical elements and systems
- BS-5070-1 - Engineering diagram drawing practice. Recommendations for general principles
- BS-5070-3 - Engineering diagram drawing practice
- BS-5070-4 - Engineering diagram drawing practice
- BS-EN-ISO-10135 - Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
- BS-EN-ISO-10579 - Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
- BS-EN-ISO-1101 - Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
- BS-EN-ISO-13715 - Technical product documentation. Edges of undefined shape. Indication and dimensioning
- BS-EN-ISO-15785 - Technical drawings. Symbolic presentation and indication of adhesive fold and pressed joints
- BS-EN-ISO-18388 - Technical product documentation (TPD). Relief grooves. Types and dimensioning
- BS-EN-ISO-2203 - Technical drawing. Conventional representation of gears
- BS-EN-ISO-2553 - Welding and allied processes. Symbolic representation on drawings. Welded joints
- BS-EN-ISO-2692 - Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- BS-EN-ISO-2692 EXPERT COMM - Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- BS-EN-ISO-3040 - Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
- BS-EN-ISO-3952-4 - Kinematic diagrams. Graphical symbols
- BS-EN-ISO-5261 - Technical drawings. Simplified representation of bars and profile sections
- BS-EN-ISO-5459 - Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
- BS-EN-ISO-5845-1 - Technical drawings. Simplified representation of the assemby of parts with fasteners
- BS-EN-ISO-6410-3-TC - Tracked Changes. Technical drawings. Screw threads and threaded parts
- BS-EN-ISO-6411 - Technical drawings. Simplified representation of centre holes
- BS-EN-ISO-6412-1-TC - Tracked Changes. Technical product documentation. Simplified representation of pipelines
- BS-EN-ISO-6412-2-TC - Tracked Changes. Technical product documentation. Simplified representation of pipelines
- BS-EN-ISO-6412-3-TC - Tracked Changes. Technical product documentation. Simplified representation of pipelines
- BS-EN-ISO-8015 - Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
- BS-EN-ISO-8826-1 - Technical drawings. Roller bearings
- BS-EN-ISO-8826-2 - Technical drawings. Roller bearings
- BS-EN-ISO-9222-1 - Technical drawings. Seals for dynamic application
- BS-ISO-10110-1 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-10 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-11 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-11-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-12 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-13 - Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold
- BS-ISO-10110-14 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-14-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-16 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-17 - Optics and optical instruments. Preparation of drawings for optical elements and systems
- BS-ISO-10110-18 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-19 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-5 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-6 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-6-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-7 - Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-7-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10110-9-TC - Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems
- BS-ISO-10135 - Geometrical Product Specifications (Gps), Drawing Indications for Moulded Parts in Tec
- BS-ISO-10579 - Geometrical Product Specifications (Gps), Dimensioning & Tolerancing, Non-Rigid Parts
- BS-ISO-128-15 - Technical product documentation (TPD). General principles of presentation
- BS-ISO-128-24 - Technical drawings. General principles of presentation
- BS-ISO-128-44 - Technical drawings. General principles of presentation
- BS-ISO-13444 - Technical product documentation (TPD). Dimensioning and indication of knurling
- BS-ISO-13715 - Technical product documentation. Edges of undefined shape. Indication and dimensioning
- BS-ISO-15786 - Technical drawings. Simplified representation and dimensioning of holes
- BS-ISO-15787 - Technical product documentation. Heat-treated ferrous parts. Presentation and indications
- BS-ISO-16249 - Springs. Symbols
- BS-ISO-17599 - Technical product documentation (TPD). General requirements of digital mock-up for mechanical products
- BS-ISO-18388 - Technical product documentation (TPD). Relief grooves. Types and dimensioning
ISO:
- ISO-10110-1 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 1: General
- ISO-10110-10 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optical elements and cemented assemblies
- ISO-10110-11 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data
- ISO-10110-12 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces
- ISO-10110-12-AM1 - - Amendment 1
- ISO-10110-13 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 13: Laser irradiation damage threshold
- ISO-10110-14 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
- ISO-10110-16 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 16: Diffractive surfaces
- ISO-10110-17 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
- ISO-10110-18 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
- ISO-10110-19 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 19: General description of surfaces and components
- ISO-10110-2 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 2: Material imperfections -- Stress birefringence
- ISO-10110-3 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 3: Material imperfections -- Bubbles and inclusions
- ISO-10110-4 - Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae
- ISO-10110-5 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
- ISO-10110-6 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances
- ISO-10110-7 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections
- ISO-10110-8 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture
- ISO-10110-9 - Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating
- ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD)
- ISO-10578 - Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
- ISO-10579 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
- ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- ISO-128-15 - Technical product documentation (TPD) - General principles of presentation - Part 15: Presentation of shipbuilding drawings
- ISO-128-24 - Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings
- ISO-128-25 - Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
- ISO-128-34 - Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings
- ISO-128-44 - Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings
- ISO-128-71 - Technical product documentation (TPD) - General principles of presentation - Part 71: Simplified representation for mechanical engineering drawings
- ISO-1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
- ISO-13444 - Technical product documentation (TPD) - Dimensioning and indication of knurling
- ISO-13715 - Technical product documentation - Edges of undefined shape - Indication and dimensioning
- ISO-14660-1 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
- ISO-14660-2 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
- ISO-15785 - Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints
- ISO-15786 - Technical drawings - Simplified representation and dimensioning of holes
- ISO-15787 - Technical product documentation - Heat-treated ferrous parts - Presentation and indications
- ISO-16249 - Springs - Symbols
- ISO-1660 - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
- ISO-17599 - Technical product documentation (TPD) - General requirements of digital mock-up for mechanical products
- ISO-18388 - Technical product documentation (TPD) - Relief grooves - Types and dimensioning
- ISO-2162-1 - Technical product documentation - Springs - Part 1: Simplified representation
- ISO-2162-2 - Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs
- ISO-2162-3 - Technical product documentation - Springs - Part 3: Vocabulary
- ISO-2203 - Technical drawings - Conventional representation of gears
- ISO-2553 - Welding and allied processes - Symbolic representation on drawings - Welded joints
- ISO-2692 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- ISO-2692-1 - Amendment 1 to ISO 2692:1988 Least material requirement
- ISO-3040 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
- ISO-5261 - Technical drawings -- Simplified representation of bars and profile sections
- ISO-5459 - Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
- ISO-5845-1 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles
- ISO-5845-2 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment
- ISO-6410-1 - Technical drawings - Screw threads and threaded parts - Part 1: General conventions
- ISO-6410-2 - Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts
- ISO-6410-3 - Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation
- ISO-6411 - Technical drawings -- Simplified representation of centre holes
- ISO-6413 - Technical product documentation - Representation of splines and serrations
- ISO-7083 - Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions
- ISO-8015 - Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
- ISO-8826-1 - Technical drawings - Rolling bearings - Part 1: General simplified representation
- ISO-8826-2 - Technical drawings - Rolling bearings - Part 2: Detailed simplified representation
- ISO-9222-1 - Technical drawings - Seals for dynamic application - Part 1: General simplified representation
- ISO-9222-2 - Technical drawings - Seals for dynamic application - Part 2: Detailed simplified representation
Other SDOs:
- DIN-ISO-10110-10 - Part 10: Table Representing Data of Optical Elements & Cemented Assemblies, Optics & P
- DIN-ISO-10110-14 - Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
- DIN-ISO-10110-17 - Part 17: Laser Irradiation Damage Threshold, Optics & Photonics, Preparation of Drawin
- EN-ISO-10579 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
- EN-ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- EN-ISO-2203 - Technical Drawing, Conventional Representation of Gears
- EN-ISO-2553 - Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019)
- EN-ISO-2692 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- EN-ISO-3040 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
- EN-ISO-3952-4 - Kinematic Diagrams, Graphical Symbols, Miscellaneous Mechanisms & Their Components
- EN-ISO-5459 - Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
- EN-ISO-6411 - Technical Drawings, Simplified Representation of Centre Hols
- EN-ISO-6413 - Technical product documentation - Representation of splines and serrations
- EN-ISO-8015 - Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
- EN-ISO-8826-1 - Technical Drawings, Roller Bearings, General Simplified Representation
- EN-ISO-8826-2 - Technical Drawings, Roller Bearings, Detailed Simplified Representation
- EN-ISO-9222-1 - Technical Drawings, Seals for Dynamic Applications, General Simplified Representation
- JIS-B-0001 - Technical drawings for mechanical engineering
- JIS-B-0002-1 - Technical drawings -- Screw threads and threaded Parts -- Part 1: General conventions
- JIS-B-0002-2 - Technical drawings -- Screw threads and threaded Parts -- Part 2: Screw thread inserts
- JIS-B-0002-3 - Technical drawings -- Screw threads and threaded Parts -- Part 3: Simplified representation
- JIS-B-0004 - Technical representation of springs
- JIS-B-0005-1 - Technical drawings -- Rolling bearings -- Part 1: General simplified representation
- JIS-B-0005-2 - Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation
- JIS-B-0006 - Technical drawings -- Representation of splines and serrations
- JIS-B-0025 - Technical drawings -- Geometrical tolerancing -- Positional tolerancing
- JIS-B-0026 - Technical drawings -- Dimensioning and tolerancing -- Non-rigid parts
- JIS-B-0027 - Technical drawings -- Dimensioning and tolerancing of profiles
- JIS-B-0028 - Technical drawings - Dimensioning and tolerancing - Cones
- JIS-B-0029 - Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
- JIS-B-0031 - Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation
- JIS-B-0031-AM1 - Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation (Amendment 1)
- JIS-B-0041 - Technical drawings -- Simplified representation of centre holes
- JIS-B-0672-1 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
- JIS-B-0672-2 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
- JIS-Z-3021 - Welding and allied processes - Symbolic representation
- SIS-ISO/TS-128-71 - Technical product documentation (TPD) - General principles of presentation - Part 71: Simplified representation for mechanical engineering drawings (ISO/TS 128-71:2010, IDT)
- SMS-GUIDE-11.1 - Clearance dimensions for screwed/bolted joints,Clearance dimensions for screwed/bolted joints
- SMS-GUIDE-11.2 - Clearance dimensions for screwed/bolted joints
- SMS-Rapport-47 - Ytjämnhet - Nya parametrar, angivning på ritning och profildjupet H
- SS-3148 - Technical drawings - Symbols for direction and first clamping
- SS-672 - Technical drawings - Method of indicating surfacetexture
- SS-782010 - Shipbuilding - Technical drawings - Metal hull structures
- SS-EN-13001-2 - Crane safety - General design - Part 2: Load actions
- SS-EN-24063 - Welding, brazing, soldering and braze welding of metals - Nomenclature of processes and reference numbers for symbolic representation on drawings (ISO 4063:1990)
- SS-EN-ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
- SS-EN-ISO-10579 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
- SS-EN-ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
- SS-EN-ISO-128-2 - Technical product documentation (TPD) - General principles of representation - Part 2: Basic conventions for lines (ISO 128-2:2022)
- SS-EN-ISO-1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
- SS-EN-ISO-13715 - Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
- SS-EN-ISO-14660-2 - Geometrical Procduct Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feautre (ISO 14660-2:1999)
- SS-EN-ISO-15785 - Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints (ISO 15785:2002)
- SS-EN-ISO-1660 - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
- SS-EN-ISO-18388 - Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016)
- SS-EN-ISO-2162-1 - Technical product documentation - Springs - Part 1: Simplified representation (ISO 2161-1:1993)
- SS-EN-ISO-2162-2 - Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993)
- SS-EN-ISO-2162-3 - Technical product documentation - Springs - Part 3: Vocabulary (ISO 2162-3:1993)
- SS-EN-ISO-21920-1 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
- SS-EN-ISO-2203 - Technical drawings - Conventional representation of gears (ISO 2203:1973)
- SS-EN-ISO-2553 - Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09)
- SS-EN-ISO-26909 - Springs - Vocabulary (ISO 26909:2009)
- SS-EN-ISO-2692 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
- SS-EN-ISO-3040 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
- SS-EN-ISO-3952-4 - Kinematic diagrams - Graphical symbols - Part 4: (ISO 3952-4:1984)
- SS-EN-ISO-5458 - Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
- SS-EN-ISO-5459 - Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
- SS-EN-ISO-5845-1 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995)
- SS-EN-ISO-6410-1 - Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
- SS-EN-ISO-6410-2 - Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)
- SS-EN-ISO-6410-3 - Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021)
- SS-EN-ISO-6411 - Technical drawings - Simplified representation ofcentre holes (ISO 6411:1982)
- SS-EN-ISO-6412-1 - Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
- SS-EN-ISO-6412-2 - Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017)
- SS-EN-ISO-6412-3 - Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017)
- SS-EN-ISO-6413 - Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
- SS-EN-ISO-6414 - Technical product documentation (TPD) - Technical drawings for glassware (ISO 6414:2020)
- SS-EN-ISO-7083 - Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)
- SS-EN-ISO-8015 - Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
- SS-EN-ISO-8826-1 - Technical drawings - Roller bearings - Part 1: General simplified representation (ISO 8826-1:1989)
- SS-EN-ISO-8826-2 - Technical drawings - Roller bearings - Part 2: Detailed simplified representation (ISO 8826-2:1994)
- SS-EN-ISO-9222-1 - Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
- SS-EN-ISO-9222-2 - Technical drawings - Seals of dynamic application- Part 2: Detailed simplified representation (ISO 9222-2:1989)
- SS-ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007, IDT)
- SS-ISO-10578 - Technical drawings - Tolerancing of orientation and location - Projected tolerance zone (ISO 10578:1992, IDT)
- SS-ISO-10579 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010, IDT)
- SS-ISO-1101 - Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- SS-ISO-128-15 - Technical product documentation (TPD) - General principles of presentation - Part 15: Presentation of shipbuilding drawings (ISO 128-15:2013, IDT)
- SS-ISO-128-24 - Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings (ISO 128-24:2014, IDT)
- SS-ISO-128-25 - Technical drawings - General principles of presentation - Part 25: Lines in shipbuilding drawings
- SS-ISO-128-34 - Technical drawings - General principles of presentation - Part 34: Views on mechanical engineering drawings (ISO 128-34:2001, IDT)
- SS-ISO-128-44 - Technical drawings - General principles of presentation - Part 44: Sections on mechanical engineering drawings
- SS-ISO-13444 - Technical product documentation (TPD) - Dimensioning and indication of knurling (ISO 13444:2012, IDT)
- SS-ISO-13715 - Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017, IDT)
- SS-ISO-15786 - Technical drawings - Simplified representation and dimensioning of holes (ISO 15786:2008, IDT)
- SS-ISO-15787 - Technical product documentation - Heat-treated ferrous parts - Presentation and indications (ISO 15787:2016, IDT)
- SS-ISO-17599 - Technical product documentation (TPD) - General requirements of digital mock-up for mechanical products (ISO 17599:2015, IDT)
- SS-ISO-2162-3 - Technical product documentation - Springs - Part 3: Vocabulary
- SS-ISO-2692 - Least material requirement
- SS-ISO-3040 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009, IDT)
- SS-ISO-406 - Technical drawings - Tolerancing of linear and angular dimensions
- SS-ISO-5459 - Technical drawings - Geometrical tolerancing - Datums and Datum-systems for geometrical tolerances
- SS-ISO-5845-1 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles
- SS-ISO-5845-2 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment
- SS-ISO-6410-1 - Technical drawings - Screw threads and threaded parts - Part 1: General conventions
- SS-ISO-6410-2 - Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts
- SS-ISO-6410-3 - Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation
- SS-ISO-6411 - Technical drawings - Simplified representation ofcentre holes
- SS-ISO-6412-1 - Technical drawings - Simplified representation ofpipelines - Part 1: General rules and orthogonal representation
- SS-ISO-6412-2 - Technical drawings - Simplified representation ofpipelines - Part 2: Isometric projection
- SS-ISO-6412-3 - Technical drawings - Simplified representation ofpipelines - Part 3: Terminal features of ventilation and drainage systems
- SS-ISO-6413 - Technical drawings - Representation of splines and serrations
- SS-ISO-6414 - Technical drawings for glassware
- SS-ISO-6428 - Technical drawings - Requirements for microcopying
- SS-ISO-8015 - Technical drawings - Fundamental tolerancing principle
- SS-ISO-8826-1 - Technical drawings - Rolling bearings - Part 1: General simplified representation
- SS-ISO-8826-2 - Technical drawings - Rolling bearings - Part 2: Detailed simplified representation
- SS-ISO-9222-1 - Technical drawings - Seals for dynamic application - Part 1: General simplified representation
- SS-ISO-9222-2 - Technical drawings - Seals for dynamic application - Part 2: Detailed simplified representation