Document Center List of Standards on Dental Materials
ICS Code 11.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-2487 - Specification for denture base polymers
- BS-2938 - Specification for dental amalgam alloy
- BS-3366-1 - Dental base metal casting alloys
- BS-3366-2 - Dental base metal casting alloys. Inlay, crown and bridge alloys
- BS-3507 - Specification. Orthodontic wire and tape and dental ligature wire
- BS-3520 - Specification for dental wrought precious metal alloy wire
- BS-3886 - Specification for dental impression compound
- BS-4227 - Specification for dental mercury
- BS-4269-1 - Dental elastic impression materials.
- BS-4269-2 - Dental elastic impression material. Specification for alginate impression material
- BS-4284 - Specification for dental impression pastes (zinc oxide type)
- BS-4425 - Specification for dental casting gold alloys
- BS-5136 - Specification for toothpastes
- BS-5189-3 - Dental casting investments
- BS-5612 - Specification for dental porcelains for jacket crowns
- BS-5794 - Specification for dental agar impression material
- BS-5828 - Methods for biological assessment of dental materials
- BS-6042 - Specification for dental semi-precious metal casting alloys
- BS-6747 - Specification for orthodontic resins
- BS-6934 - Specification for dental root canal sealing materials
- BS-7013 - Specification for dental gypsum products
- BS-7214 - Specification for Dental Zinc Oxide/Eugenol Cements & Zinc Oxide Non-Eugenol Cements
- BS-EN-1641 - Dentistry. Medical devices for dentistry. Materials
- BS-EN-21559 - Specification for alloys for dental amalgam
- BS-EN-21564 - Specification for dental agar impression material
- BS-EN-24823 - Dental elastic impression material. Specification for elastomeric impression materials
- BS-EN-26874 - Specification for dental resin-based pit and fissure sealants
- BS-EN-30139-1 - Dentistry, Resilient Lining Materials for Removable Dentures, Specification for Short
- BS-EN-30993-1 - Biological evaluation of medical devices
- BS-EN-30993-3 - Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
- BS-EN-30993-4 - Biological evaluation of medical devices. Selection of tests for interactions with blood
- BS-EN-30993-5 - Biological evaluation of medical devices. Tests for cytotoxicity, in vitro methods
- BS-EN-30993-6 - Biological evaluation of medical devices
- BS-EN-ISO-10139-1 - Dentistry. Soft lining materials for removable dentures
- BS-EN-ISO-10139-1-TC - Tracked Changes. Dentistry. Soft lining materials for removable dentures
- BS-EN-ISO-10139-2 - Dentistry. Soft lining materials for removable dentures
- BS-EN-ISO-10139-2-TC - Tracked Changes. Dentistry. Soft lining materials for removable dentures
- BS-EN-ISO-10271 - Dentistry. Corrosion test methods for metallic materials
- BS-EN-ISO-10477 - Dentistry. Polymer-based crown and veneering materials
- BS-EN-ISO-10477-TC - Tracked Changes. Dentistry. Polymer-based crown and veneering materials
- BS-EN-ISO-10873-TC - Tracked Changes. Dentistry. Denture adhesives
- BS-EN-ISO-11244 - Dental brazing investments
- BS-EN-ISO-11245 - Dental restorations. Phosphate-bonded refractory die materials
- BS-EN-ISO-11246 - Dental ethyl silicate bonded casting investments
- BS-EN-ISO-11609 - Dentistry. Dentifrices. Requirements, test methods and marking
- BS-EN-ISO-11609-TC - Tracked Changes. Dentistry. Dentifrices. Requirements, test methods and marking
- BS-EN-ISO-12163 - Dental baseplate/modelling wax
- BS-EN-ISO-13017 - Dentistry. Magnetic attachments
- BS-EN-ISO-13116 - Dentistry. Test Method for Determining Radio-Opacity of Materials
- BS-EN-ISO-13716 - Dentistry. Reversible-irreversible hydrocolloid impression material systems
- BS-EN-ISO-13897 - Dentistry. Dental amalgam reusable mixing-capsules
- BS-EN-ISO-13897-TC - Tracked Changes. Dentistry. Dental amalgam reusable mixing-capsules
- BS-EN-ISO-14233 - Dentistry. Polymer-based die materials
- BS-EN-ISO-14356 - Dentistry. Duplicating material
- BS-EN-ISO-1559 - Dental materials. Alloys for dental amalgam
- BS-EN-ISO-1562 - Dentistry. Casting gold alloys
- BS-EN-ISO-1564 - Dental aqueous impression materials based on agar
- BS-EN-ISO-1567 - Dentistry. Denture base polymers
- BS-EN-ISO-15841 - Dentistry. Wires for use in orthodontics
- BS-EN-ISO-15854 - Dentistry. Casting and baseplate waxes
- BS-EN-ISO-15854-TC - Tracked Changes. Dentistry. Casting and baseplate waxes
- BS-EN-ISO-15912 - Dentistry. Refractory investment and die material
- BS-EN-ISO-16408 - Dentistry. Oral care products. Oral rinses
- BS-EN-ISO-16744 - Dentistry, Base Metal Materials for Fixed Dental Restorations
- BS-EN-ISO-17254 - Dentistry. Coiled springs for use in orthodontics
- BS-EN-ISO-17304 - Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- BS-EN-ISO-18675 - Dentistry. Machinable ceramic blanks
- BS-EN-ISO-19023 - Dentistry. Orthodontic anchor screws
- BS-EN-ISO-20749-TC - Tracked Changes. Dentistry. Pre-capsulated dental amalgam
- BS-EN-ISO-20795-1 - Dentistry. Base polymers
- BS-EN-ISO-20795-2 - Dentistry. Base polymers
- BS-EN-ISO-21563 - Dentistry. Hydrocolloid impression materials
- BS-EN-ISO-21563-TC - Tracked Changes. Dentistry. Hydrocolloid impression materials
- BS-EN-ISO-21606 - Dentistry. Elastomeric auxiliaries for use in orthodontics
- BS-EN-ISO-21606-TC - Tracked Changes. Dentistry. Elastomeric auxiliaries for use in orthodontics
- BS-EN-ISO-22112 - Dentistry. Artificial teeth for dental prostheses
- BS-EN-ISO-22112-TC - Tracked Changes. Dentistry. Artificial teeth for dental prostheses
- BS-EN-ISO-22598 - Dentistry. Colour tabs for intraoral tooth colour determination
- BS-EN-ISO-22674 - Dentistry. Metallic materials for fixed and removable restorations and appliances
- BS-EN-ISO-22674-TC - Tracked Changes. Dentistry. Metallic materials for fixed and removable restorations and appliances
- BS-EN-ISO-23325 - Dentistry. Corrosion resistance of dental amalgam
- BS-EN-ISO-24234 - Dentistry. Dental amalgam
- BS-EN-ISO-28319 - Dentistry. Laser welding and filler materials
- BS-EN-ISO-28319-TC - Tracked Changes. Dentistry. Laser welding and filler materials
- BS-EN-ISO-29022 - Dentistry. Adhesion. Notched-edge shear bond strength test
- BS-EN-ISO-3107 - Dentistry. Zinc oxide-eugenol cements and non-eugenol zinc oxide cements
- BS-EN-ISO-3107-TC - Tracked Changes. Dentistry. Zinc oxide-eugenol cements and non-eugenol zinc oxide cements
- BS-EN-ISO-3990 - Dentistry. Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
- BS-EN-ISO-4049 - Dentistry. Polymer-based restorative materials
- BS-EN-ISO-4823 - Dentistry. Elastomeric impression and bite registration materials
- BS-EN-ISO-4823-TC - Tracked Changes. Dentistry. Elastomeric impression materials
- BS-EN-ISO-5139 - Dentistry. Polymer-based composite machinable blanks
- BS-EN-ISO-6871-1 - Dental base metal casting alloys
- BS-EN-ISO-6871-2 - Dental base metal casting alloys
- BS-EN-ISO-6872 - Dentistry. Ceramic materials
- BS-EN-ISO-6872-TC - Tracked Changes. Dentistry. Ceramic materials
- BS-EN-ISO-6873 - Dentistry. Gypsum products
- BS-EN-ISO-6874 - Dentistry. Polymer-based pit and fissure sealants
- BS-EN-ISO-6874-TC - Tracked Changes. Dentistry. Polymer-based pit and fissure sealants
- BS-EN-ISO-6876 - Dentistry. Root canal sealing materials
- BS-EN-ISO-6877 - Dentistry. Endodontic obturating materials
- BS-EN-ISO-6877-TC - Tracked Changes. Dentistry. Endodontic obturating materials
- BS-EN-ISO-7405 - Dentistry. Evaluation of biocompatibility of medical devices used in dentistry
- BS-EN-ISO-7490 - Dental gypsum-bonded casting investments
- BS-EN-ISO-7491 - Dental materials. Determination of colour stability
- BS-EN-ISO-7551-TC - Tracked Changes. Dentistry. Endodontic absorbent points
- BS-EN-ISO-8891 - Dental casting alloys with noble metal content of at least 25% but less than 75%
- BS-EN-ISO-9333 - Dentistry. Brazing materials
- BS-EN-ISO-9333-TC - Tracked Changes. Dentistry Brazing materials
- BS-EN-ISO-9693 - Dentistry. Compatibility testing for metal-ceramic and ceramic-ceramic systems
- BS-EN-ISO-9693-1 - Dentistry. Compatibility testing
- BS-EN-ISO-9693-2 - Dentistry. Compatibility testing
- BS-EN-ISO-9694 - Dental Phosphate-Bonded Casting Investments
- BS-EN-ISO-9917-1 - Dentistry. Water-based cements
- BS-EN-ISO-9917-2 - Dentistry. Water-based cements
- BS-EN-ISO-9917-2-TC - Tracked Changes. Dentistry. Water-based cements
- BS-ISO-20749 - Dentistry. Pre-capsulated dental amalgam
- BS-ISO-24234 - Dentistry. Dental amalgam
- BS-ISO-24234-TC - Tracked Changes. Dentistry. Dental amalgam
- DD-ISO-17576 - Dentistry, Corrosion Tests for Amalgam
- PD-CEN-16386 - Dentistry. Guidelines for handling methacrylate-based materials in the dental laboratory
- PD-ISO-11405 - Dentistry. Testing of adhesion to tooth structure
- PD-ISO-14569-1 - Dental materials. Guidance on testing of wear
- PD-ISO-16506 - Dentistry. Polymer-based luting materials containing adhesive components
- PD-ISO-17988 - Dentistry. Corrosion test methods for dental amalgam
- PD-ISO-19736 - Dentistry. Bonding test between polymer teeth and denture base materials
- PD-ISO-20746 - Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
- PD-ISO-28642 - Dentistry. Guidance on colour measurement
ISO:
- ISO-10139-1 - Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use
- ISO-10139-2 - Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use
- ISO-10271 - Dentistry - Corrosion test methods for metallic materials
- ISO-10477 - Dentistry - Polymer-based crown and veneering materials
- ISO-10477-1 - Amendment
- ISO-11175 - Dental implants -- Guidelines for developing dental implants
- ISO-11244 - Dental brazing investments
- ISO-11245 - Dental restorations -- Phosphate-bonded refractory die materials
- ISO-11246 - Dental ethyl silicate bonded casting investments
- ISO-11405 - Dentistry - Testing of adhesion to tooth structure
- ISO-12163 - Dental baseplate/modelling wax
- ISO-13017 - Dentistry - Magnetic attachments
- ISO-13017-AM1 - - Amendment 1
- ISO-13116 - Dentistry - Test Method for Determining Radio-Opacity of Materials
- ISO-13716 - Dentistry -- Reversible-irreversible hydrocolloid impression material systems
- ISO-13897 - Dentistry - Dental amalgam reusable mixing-capsules
- ISO-14233 - Dentistry - Polymer-based die materials
- ISO-14356 - Dentistry - Duplicating material
- ISO-14569-1 - Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing
- ISO-14569-2 - Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact
- ISO-1559 - Corrigendum
- ISO-1560 - Dental mercury
- ISO-1561 - Dental casting wax
- ISO-1562 - Dentistry - Casting gold alloys
- ISO-1563 - Dental alginate impression material
- ISO-1564 - Dental aqueous impression materials based on agar
- ISO-1567 - Dentistry -- Denture base polymers
- ISO-1567-AM 1 - Amendment 1, Dentistry -- Denture base polymers
- ISO-15841 - Dentistry - Wires for use in orthodontics
- ISO-15841-AM1 - - Amendment 1
- ISO-15854 - Dentistry - Casting and baseplate waxes
- ISO-15912 - Dentistry - Refractory investment and die material
- ISO-15912-AM1 - Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials
- ISO-16408 - Dentistry - Oral care products - Oral rinses
- ISO-16506 - Dentistry - Polymer-based luting materials containing adhesive components
- ISO-16744 - Dentistry - Base Metal Materials for Fixed Dental Restorations
- ISO-17254 - Dentistry - Coiled springs for use in orthodontics
- ISO-17254-AM1 - - Amendment 1
- ISO-17304 - Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
- ISO-17576 - Dentistry - Corrosion tests for amalgam
- ISO-17988 - Dentistry - Corrosion test methods for dental amalgam
- ISO-18675 - Dentistry - Machinable ceramic blanks
- ISO-19023 - Dentistry - Orthodontic anchor screws
- ISO-1942-2 - Dental vocabulary -- Part 2: Dental materials
- ISO-1942-2-1 - Amendment 1 to ISO 1942-2:1989
- ISO-1942-2-2 - Amendment 2 to ISO 1642:1983
- ISO-20746 - Dentistry - Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
- ISO-20749 - Dentistry - Pre-capsulated dental amalgam
- ISO-20795-1 - Dentistry - Base polymers - Part 1: Denture base polymers
- ISO-20795-2 - Dentistry - Base polymers - Part 2: Orthodontic base polymers
- ISO-21563 - Dentistry - Hydrocolloid impression materials
- ISO-21606 - Dentistry - Elastomeric auxiliaries for use in orthodontics
- ISO-22112 - Dentistry - Artificial teeth for dental prostheses
- ISO-22598 - Dentistry - Colour tabs for intraoral tooth colour determination
- ISO-22674 - Dentistry - Metallic materials for fixed and removable restorations and appliances
- ISO-23325 - Dentistry - Corrosion resistance of dental amalgam
- ISO-23401-1 - Dentistry - Chairside denture base relining materials - Part 1: Hard type materials
- ISO-24234 - Dentistry - Dental amalgam
- ISO-24234-AM1 - - Amendment 1: Requirements for marking and manufacturers instructions concerning mercury
- ISO-27020 - Dentistry - Brackets and tubes for use in orthodontics
- ISO-28319 - Dentistry - Laser welding and filler materials
- ISO-28642 - Dentistry - Guidance on colour measurement
- ISO-29022 - Dentistry - Adhesion - Notched-edge shear bond strength test
- ISO-3107 - Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements
- ISO-3336 - Dentistry -- Synthetic polymer teeth
- ISO-3990 - Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
- ISO-4049 - Dentistry - Polymer-based restorative materials
- ISO-4640 - Dentistry - Test methods for tensile bond strength to tooth structure
- ISO-4823 - Dentistry - Elastomeric impression and bite registration materials
- ISO-4823-1 - Dental materials - Elastomeric impression materials - Amendment 1
- ISO-4824 - Dentistry -- Ceramic denture teeth
- ISO-4824-1 - Amendment
- ISO-5139 - Dentistry - Polymer-based composite machinable blanks
- ISO-6871-1 - Corrigendum
- ISO-6871-1-1 - Amendment 1, Part 1: Cobalt-Based Alloys, Dental Base Metalcasting Alloys
- ISO-6871-2 - Dental base metal casting alloys -- Part 2: Nickel-based alloys
- ISO-6871-2-1 - Amendment 1, Part 2: Nickel-Based Alloys, Dental Base Metalcasting Alloys
- ISO-6872 - Dentistry - Ceramic materials
- ISO-6872-1 - Amendment
- ISO-6872-AM1 - - Amendment 1
- ISO-6873 - Dentistry - Gypsum products
- ISO-6874 - Dentistry - Polymer-based pit and fissure sealants
- ISO-6876 - Dentistry - Root canal sealing materials
- ISO-6877 - Dentistry - Endodontic obturating materials
- ISO-7405 - Dentistry - Evaluation of biocompatibility of medical devices used in dentistry
- ISO-7405-AM1 - - Amendment 1: Positive control material
- ISO-7490 - Dental gypsum-bonded casting investments
- ISO-7491 - Dental materials -- Determination of colour stability
- ISO-7551 - Dentistry - Endodontic absorbent points
- ISO-8891 - Dental casting alloys with noble metal content of at least 25 % but less than 75 %
- ISO-9333 - Dentistry - Brazing materials
- ISO-9693 - Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems
- ISO-9693-1 - Dentistry - Compatibility testing - Part 1: Metal-ceramic systems
- ISO-9693-2 - Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems
- ISO-9693-AM1 - Dental ceramic fused to metal restorative materials - Amendment 1
- ISO-9694 - Dental phosphate-bonded casting investments
- ISO-9917 - Dental Water-Based Cements
- ISO-9917-1 - Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements
- ISO-9917-2 - Dentistry - Water-based cements - Part 2: Resin-modified cements
- ISO/DIS-6872 - Dentistry - Ceramic Materials
Other SDOs:
- DIN-EN-1641 - Dentistry - Medical Devices for Dentistry - Materials
- DIN-EN-ISO-10139-1 - Part 1: Materials for Short-Term Use, Dentistry, Soft Lining Materials for Removable D
- DIN-EN-ISO-10477 - Dentistry - Polymer-Based Crown & Bridge Materials
- DIN-EN-ISO-13897 - Dentistry, Amalgam Capsules
- DIN-EN-ISO-1559 - Dental materials - Alloys for dental amalgam
- DIN-EN-ISO-1562 - Dentistry, Casting Gold Alloys
- DIN-EN-ISO-15841 - Dentistry - Wires for use in orthodontics
- DIN-EN-ISO-15854 - Dentistry, Casting & Baseplate Waxes
- DIN-EN-ISO-15912 - Dentistry - Refractory investment and die material
- DIN-EN-ISO-16744 - Dentistry, Base Metal Materials for Fixed Dental Restorations
- DIN-EN-ISO-22674 - Dentistry - Metallic materials for fixed and removable restorations and appliances
- DIN-EN-ISO-22803 - Dentistry - Membrane Materials for Guided Tissue Regeneration in Oral & Maxillofacial
- DIN-EN-ISO-24234 - Dentistry - Dental amalgam
- DIN-EN-ISO-3107 - Dentistry - Zinc Oxide/Eugenol Cements & Zinc Oxide/Non-Eugenol Cements
- DIN-EN-ISO-6874 - Dentistry - Polymer-based pit and fissure sealants
- DIN-EN-ISO-6876 - Dentistry - Root canal sealing materials (ISO 6876:2012)
- DIN-EN-ISO-6877 - Dentistry - Root-Canal Obturating Points
- DIN-EN-ISO-9333 - Dentistry - Brazing Materials
- EN-1641 - Dentistry - Medical Devices for Dentistry - Materials
- EN-ISO-10139-1 - Part 1: Materials for Short-Term Use, Dentistry, Soft Lining Materials for Removable D
- EN-ISO-10139-2 - Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use
- EN-ISO-10271 - Dentistry - Corrosion test methods for metallic materials
- EN-ISO-10477 - Dentistry, Polymer-Based Crown & Bridge Materials
- EN-ISO-11245 - Dentistry - Casting investments and refractory die materials
- EN-ISO-11609 - Dentistry - Dentifrices - Requirements, test methods and marking
- EN-ISO-13017 - Dentistry - Magnetic attachments - Amendment 1
- EN-ISO-13116 - Dentistry - Test Method for Determining Radio-Opacity of Materials
- EN-ISO-13897 - Dentistry, Amalgam Capsules
- EN-ISO-15841 - Dentistry - Wires for use in orthodontics
- EN-ISO-15854 - Dentistry, Casting & Baseplate Waxes
- EN-ISO-15912 - Dentistry - Refractory investment and die material
- EN-ISO-16408 - Dentistry - Oral care products - Oral rinses
- EN-ISO-17254 - Dentistry - Coiled springs for use in orthodontics
- EN-ISO-17304 - Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013)
- EN-ISO-19023 - Dentistry - Orthodontic anchor screws
- EN-ISO-20749 - Dentistry - Pre-capsulated dental amalgam
- EN-ISO-20795-1 - Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
- EN-ISO-20795-2 - Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
- EN-ISO-21563 - Dentistry - Hydrocolloid impression materials (ISO 21563:2013)
- EN-ISO-21606 - Dentistry, Elastomeric Auxiliaries for Use in Orthodontics
- EN-ISO-22112 - Dentistry - Artificial teeth for dental prostheses
- EN-ISO-22674 - Dentistry - Metallic materials for fixed and removable restorations and appliances
- EN-ISO-24234 - Dentistry - Dental amalgam
- EN-ISO-28319 - Dentistry, Laser Welding
- EN-ISO-29022 - Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)
- EN-ISO-3107 - Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements
- EN-ISO-4049 - Dentistry - Polymer-Based Restorative Materials
- EN-ISO-4823 - Dentistry - Elastomeric impression materials
- EN-ISO-6872 - Dentistry - Ceramic materials
- EN-ISO-6873 - Dentistry - Gypsum products (ISO 6873:2013)
- EN-ISO-6874 - Dentistry - Polymer-based pit and fissure sealants
- EN-ISO-6876 - Dentistry - Root canal sealing materials (ISO 6876:2012)
- EN-ISO-6877 - Dentistry - Root-Canal Obturating Points
- EN-ISO-7405 - Dentistry - Evaluation of biocompatibility of medical devices used in dentistry - Amendment 1: Positive control material (ISO 7405:2008/Amd 1:2013)
- EN-ISO-9333 - Dentistry - Brazing materials (ISO 9333:2006)
- EN-ISO-9693-1 - Dentistry - Compatibility testing - Part 1: Metal-ceramic systems
- EN-ISO-9693-2 - Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems
- EN-ISO-9917-1 - Dentistry, Water-Based Cements, Powder/Liquid Acid-Base Cements
- EN-ISO-9917-2 - Dentistry - Water-based cements - Part 2: Resin-modified cements
- SIS-ISO/TS-11405 - Dental Materials - Testing of adhesion to tooth structure
- SIS-ISO/TS-14569-2 - Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact
- SIS-ISO/TS-20746 - Dentistry - Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
- SS-8756246 - Dental glass polyalkenoate cements
- SS-8756462 - Dental materials - Determination of colour stability of dental polymeric materials
- SS-EN-1097-6 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- SS-EN-1641 - Dentistry - Medical devices for dentistry - Materials
- SS-EN-21559 - Dentistry - Alloys for dental amalgam
- SS-EN-21560 - Dentistry - Dental mercury
- SS-EN-21561 - Dental inlay casting wax (ISO 1561:1975)
- SS-EN-21563 - Alginate dental impression material
- SS-EN-21564 - Dentistry - Agar impression material (ISO 1564:1976)
- SS-EN-23107 - Dental zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107-1988)
- SS-EN-24049 - Dentistry - Resin-based filling materials
- SS-EN-24104 - Dentistry - Dental zinc polycarboxylate cements (ISO 4104:1984)
- SS-EN-24823 - Dental elastomertic impression materials (ISO 4823:1992)
- SS-EN-26871 - Dentistry - Dental base metal casting alloys (ISO6871:1987)
- SS-EN-26873 - Dentistry - Dental gypsum products (ISO 6873:1983)
- SS-EN-26874 - Dental resin-based pit and fissure sealants
- SS-EN-26876 - Dentistry - Dental root canal sealing materials (ISO 6876:1986)
- SS-EN-27490 - Dental gypsum-bonded casting investment for gold alloys (ISO 7490:1990)
- SS-EN-27491 - Dentistry - Dental materials - Determination of colour stability of dental polymeric materials (ISO7491:1985)
- SS-EN-29333 - Dental brazing materials (ISO 9333:1990)
- SS-EN-29917 - Dental water-based cements (ISO 9917:1991 + Technical Corrigendum 1)
- SS-EN-30139-1 - Dentistry - Resilient lining materials for removable dentures - Part 1: Short-term materials (ISO 10 139-1:1991)
- SS-EN-ISO-10139-1 - Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2018)
- SS-EN-ISO-10139-2 - Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016)
- SS-EN-ISO-10271 - Dentistry - Corrosion test methods for metallic materials (ISO 10271:2020)
- SS-EN-ISO-10451 - Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010)
- SS-EN-ISO-10477 - Dentistry - Polymer-based crown and veneering materials (ISO 10477:2020)
- SS-EN-ISO-10477-AM1 - Dentistry - Polymer-based crown and bridge materials ((ISO 10477:1992/Amd 1:1998))
- SS-EN-ISO-11244 - Dental brazing investments (ISO 11244:1998)
- SS-EN-ISO-11245 - Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999)
- SS-EN-ISO-11246 - Dental ethyl silicate bonded casting investments (ISO 11246:1996)
- SS-EN-ISO-11609 - Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
- SS-EN-ISO-12163 - Dental baseplate/modelling wax (ISO 12163:1999)
- SS-EN-ISO-13017 - Dentistry - Magnetic attachments (ISO 13017:2020)
- SS-EN-ISO-13116 - Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO 13116:2014)
- SS-EN-ISO-13716 - Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999)
- SS-EN-ISO-13897 - Dentistry - Dental amalgam reusable mixing-capsules (ISO 13897:2018)
- SS-EN-ISO-14233 - Dentistry - Polymer-based die materials (ISO 14233:2003)
- SS-EN-ISO-14356 - Dentistry - Duplicating material (ISO 14356:2003)
- SS-EN-ISO-1559 - Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997)
- SS-EN-ISO-1561 - Dental casting wax (ISO 1561:1995)
- SS-EN-ISO-1562 - Dentistry - Casting gold alloys (ISO 1562:2004)
- SS-EN-ISO-1564 - Dental aqueous impression materials based on agar (ISO 1564:1995)
- SS-EN-ISO-1567 - Dentistry - Denture base polymers (ISO 1567:1999)
- SS-EN-ISO-15841 - Dentistry - Wires for use in orthodontics (ISO 15841:2014)
- SS-EN-ISO-15841-AM1 - Dentistry - Wires for use in orthodontics - Amendment 1 (ISO 15841:2014/Amd 1:2020)
- SS-EN-ISO-15854 - Dentistry - Casting and baseplate waxes (ISO 15854:2023)
- SS-EN-ISO-15912 - Dentistry - Refractory investment and die material (ISO 15912:2016)
- SS-EN-ISO-15912-AM1 - Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/Amd 1:2011)
- SS-EN-ISO-16408 - Dentistry - Oral care products - Oral rinses (ISO 16408:2015)
- SS-EN-ISO-16744 - Dentistry - Base metal materials for fixed dental restorations (ISO 16744:2003)
- SS-EN-ISO-17254 - Dentistry - Coiled springs for use in orthodontics (ISO 17254:2016)
- SS-EN-ISO-17254-AM1 - Dentistry - Coiled springs for use in orthodontics - Amendment 1 (ISO 17254:2016/Amd 1:2020)
- SS-EN-ISO-17304 - Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013)
- SS-EN-ISO-18675 - Dentistry - Machinable ceramic blanks (ISO 18675:2022)
- SS-EN-ISO-19023 - Dentistry - Orthodontic anchor screws (ISO 19023:2018)
- SS-EN-ISO-20749 - Dentistry - Pre-capsulated dental amalgam (ISO 20749:2023)
- SS-EN-ISO-20795-1 - Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013)
- SS-EN-ISO-20795-2 - Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013)
- SS-EN-ISO-21530 - Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004)
- SS-EN-ISO-21563 - Dentistry - Hydrocolloid impression materials (ISO 21563:2021)
- SS-EN-ISO-21606 - Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2022)
- SS-EN-ISO-22112 - Dentistry - Artificial teeth for dental prostheses (ISO 22112:2017)
- SS-EN-ISO-22598 - Dentistry - Colour tabs for intraoral tooth colour determination (ISO 22598:2020)
- SS-EN-ISO-22674 - Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2022)
- SS-EN-ISO-23325 - Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020)
- SS-EN-ISO-23401-1 - Dentistry - Chairside denture base relining materials - Part 1: Hard type materials (ISO 23401-1:2023)
- SS-EN-ISO-24234 - Dentistry - Dental amalgam (ISO 24234:2015)
- SS-EN-ISO-24234-AM1 - Dentistry - Mercury and alloys for dental amalgam - Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury (ISO 24234:2004/Amd 1:2011)
- SS-EN-ISO-27020 - Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019)
- SS-EN-ISO-28319 - Dentistry - Laser welding and filler materials (ISO 28319:2018)
- SS-EN-ISO-29022 - Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)
- SS-EN-ISO-3107 - Dentistry - Zinc oxide-eugenol cements and non-eugenol zinc oxide cements (ISO 3107:2022)
- SS-EN-ISO-3336 - Dentistry - Synthetic polymer teeth (ISO 3336:1993)
- SS-EN-ISO-3990 - Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials (ISO 3990:2023)
- SS-EN-ISO-4049 - Dentistry - Polymer-based restorative materials (ISO 4049:2019)
- SS-EN-ISO-4823 - Dentistry - Elastomeric impression and bite registration materials (ISO 4823:2021)
- SS-EN-ISO-4823-AM1 - Dentistry - Elastomeric impression materials (ISO 4823:2000/Amd 1:2007)
- SS-EN-ISO-4824 - Dentistry - Ceramic denture teeth (ISO 4824:1993)
- SS-EN-ISO-4824-AM1 - Dentistry - Ceramic denture teeth ( ISO 4824:1993/Amd 1:1997)
- SS-EN-ISO-6871-1 - Dental base metal casting alloys - Part 1: Cobalt-based alloys (ISO 6871-1:1994)
- SS-EN-ISO-6871-2 - Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994)
- SS-EN-ISO-6872 - Dentistry - Ceramic materials (ISO 6872:2015)
- SS-EN-ISO-6872-AM1 - Dentistry - Ceramic materials (ISO 6872:2015/Amd 1:2018)
- SS-EN-ISO-6873 - Dentistry - Gypsum products (ISO 6873:2013)
- SS-EN-ISO-6874 - Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015)
- SS-EN-ISO-6876 - Dentistry - Root canal sealing materials (ISO 6876:2012)
- SS-EN-ISO-6877 - Dentistry - Endodontic obturating materials (ISO 6877:2021)
- SS-EN-ISO-7405 - Dentistry - Evaluation of biocompatibility of medical devices used in dentistry (ISO 7405:2008)
- SS-EN-ISO-7490 - Dental gypsum-bonded casting investments (ISO 7490:2000)
- SS-EN-ISO-7491 - Dental materials - Determination of colour stability (ISO 7491:2000)
- SS-EN-ISO-7494-2 - Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems (ISO 7494-2:2022)
- SS-EN-ISO-7551 - Dental absorbent points (ISO 7551:1996)
- SS-EN-ISO-8891 - Dental casting alloys with noble metal content of at least 25% but less than 75% (ISO 8891:1998)
- SS-EN-ISO-9333 - Dentistry - Brazing materials (ISO 9333:2022)
- SS-EN-ISO-9693 - Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2019)
- SS-EN-ISO-9693-1 - Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012)
- SS-EN-ISO-9693-2 - Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016)
- SS-EN-ISO-9694 - Dental phosphate-bonded casting investments (ISO 9694:1996)
- SS-EN-ISO-9917-1 - Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO 9917-1:2007)
- SS-EN-ISO-9917-2 - Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017)
- SS-HD-24824 - Dentistry - Porcelain denture teeth