Document Center List of Standards on Aids And Adaptation For Moving Including Wheelchairs, Walking Sticks And Lifting Platforms
ICS Code 11.180.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-F1746 - Test Method for Determining In-Plane Compressive Properties of Circular Ring or Ring Segment Bridge Elements (Withdrawn 2000)
- ASTM-F1748 - Test Method for External Fixator Subassemblies (Withdrawn 2000)
- ASTM-F2531 - Standard Test Method for Load Capacity of Treestand Seats
- ASTM-F2665 - Standard Specification for Total Ankle Replacement Prosthesis
- ASTM-F2887 - Standard Specification for Total Elbow Prostheses
- ASTM-F3295 - Standard Guide for Impingement Testing of Total Disc Prostheses
- ASTM-F3358 - Standard Practice for Labeling and Information for Exoskeletons
BSI:
- BS-5943 - Methods for measurement and recording for orthopaedic footwear
- BS-6440 - Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification
- BS-6937 - Glossary of Wheelchair Terms
- BS-8603 - Code of practice for wheelchair passport schemes
- BS-8625 - Selection, placement and fixation of flexible postural support devices in seating. Specification
- BS-EN-12183 - Manual wheelchairs. Requirements and test methods
- BS-EN-12184 - Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
- BS-EN-1985 - Walking aids. General requirements and test methods
- BS-EN-81-40 - Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods
- BS-EN-81-41 - Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods
- BS-EN-ISO-10535-TC - Tracked Changes. Assistive products. Hoists for the transfer of persons. Requirements and test methods
- BS-EN-ISO-11199-1 - Assistive products for walking manipulated by both arms. Requirements and test methods
- BS-EN-ISO-11199-1-TC - Tracked Changes. Assistive products for walking manipulated by both arms. Requirements and test methods
- BS-EN-ISO-11199-2 - Assistive products for walking manipulated by both arms. Requirements and test methods
- BS-EN-ISO-11199-2-TC - Tracked Changes. Assistive products for walking manipulated by both arms. Requirements and test methods
- BS-EN-ISO-11199-3 - Walking aids manipulated by both arms. Requirements and test methods
- BS-EN-ISO-11334-1 - Assistive products for walking manipulated by one arm. Requirements and test methods
- BS-EN-ISO-24415-1 - Tips for assistive products for walking. Requirements and test methods
- BS-ISO-10542-1 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
- BS-ISO-10542-2 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
- BS-ISO-10542-3 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
- BS-ISO-10542-4 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant restraint systems
- BS-ISO-10542-5 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
- BS-ISO-10865-1 - Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers
- BS-ISO-10865-2 - Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers
- BS-ISO-16840-10 - Wheelchair seating
- BS-ISO-16840-11 - Wheelchair seating
- BS-ISO-16840-11-TC - Tracked Changes. Wheelchair seating
- BS-ISO-16840-12 - Wheelchair seating
- BS-ISO-16840-13 - Wheelchair seating
- BS-ISO-16840-2 - Wheelchair seating
- BS-ISO-16840-2-TC - Tracked Changes. Wheelchair seating
- BS-ISO-16840-3 - Wheelchair seating
- BS-ISO-16840-3-TC - Tracked Changes. Wheelchair seating
- BS-ISO-16840-6 - Wheelchair seating
- BS-ISO-19894 - Walking trolleys. Requirements and test methods
- BS-ISO-24415-2 - Tips for assistive products for walking. Requirements and test methods
- BS-ISO-7176-1 - Wheelchairs
- BS-ISO-7176-11 - Wheelchairs
- BS-ISO-7176-14 - Wheelchairs
- BS-ISO-7176-16 - Wheelchairs
- BS-ISO-7176-19 - Wheelchairs
- BS-ISO-7176-19-TC - Tracked Changes. Wheelchairs
- BS-ISO-7176-2 - Wheelchairs
- BS-ISO-7176-21 - Wheelchairs
- BS-ISO-7176-22 - Wheelchairs
- BS-ISO-7176-24 - Wheelchairs
- BS-ISO-7176-25 - Wheelchairs
- BS-ISO-7176-25-TC - Tracked Changes. Wheelchairs
- BS-ISO-7176-26 - Wheelchairs
- BS-ISO-7176-28 - Wheelchairs
- BS-ISO-7176-2-TC - Tracked Changes. Wheelchairs
- BS-ISO-7176-3 - Wheelchairs
- BS-ISO-7176-30 - Wheelchairs
- BS-ISO-7176-32 - Wheelchairs
- BS-ISO-7176-4 - Wheelchairs
- BS-ISO-7176-5 - Wheelchairs
- BS-ISO-7176-6 - Wheelchairs
- BS-ISO-7176-6-TC - Tracked Changes. Wheelchairs
- BS-ISO-7176-8 - Wheelchairs
- BS-ISO-7176-9 - Wheelchairs
- CWA-16697 - Car-Adaptations for Disabled Drivers. Requirements, test methods and best practise guidelines
- PAS-2012-1 - M1 vehicles for the carriage of one or more passengers seated in wheelchairs
- PAS-2012-2 - M1 vehicles for the carriage of one or more passengers seated in wheelchairs
- PAS-900 - Code of Practice for Wheelchair Passports
- PD-ISO-13570 - Guidelines for the application of the ISO 7176 series on wheelchairs
- PD-ISO-13570-2 - Wheelchairs
- PD-ISO-16840-11 - Wheelchair seating
- PD-ISO-16840-12 - Wheelchair seating
- PD-ISO-16840-9 - Wheelchair seating
ISO:
- ISO-10535 - Assistive products - Hoists for the transfer of persons - Requirements and test methods
- ISO-10542-1 - Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems
- ISO-10542-1-AM1 - - Amendment 1: Annexes K, L, M
- ISO-10542-2 - Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 2: Four-point strap-type tiedown systems
- ISO-10542-3 - Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 3: Docking-type tiedown systems
- ISO-10542-4 - Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 4: Clamp-type tiedown systems
- ISO-10542-5 - Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 5: Systems for specific wheelchairs
- ISO-10865-1 - Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 1: Systems for rearward-facing wheelchair-seated passengers
- ISO-10865-2 - Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers
- ISO-11199-1 - Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames
- ISO-11199-2 - Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators
- ISO-11199-3 - Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables
- ISO-11334-1 - Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches
- ISO-11334-4 - Walking aids manipulated by one arm -- Requirements and test methods -- Part 4: Walking sticks with three or more legs
- ISO-13570 - Guidelines for the Application of the ISO-7176 Series on Wheelchairs
- ISO-13570-1 - Wheelchairs - Part 1: Guidelines for the application of the ISO 7176 series on wheelchairs
- ISO-13570-2 - Wheelchairs - Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5
- ISO-16840-1 - Wheelchair seating - Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
- ISO-16840-10 - Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method
- ISO-16840-11 - Wheelchair seating - Part 11: Determination of dissipation characteristics of sensible perspiration into seat cushions
- ISO-16840-12 - Wheelchair seating - Part 12: Envelopment and immersion characterization of seat cushions using a dual semispherical indenter
- ISO-16840-13 - Wheelchair seating - Part 13: Determination of the lateral stability property of a seat cushion
- ISO-16840-2 - Wheelchair seating - Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity
- ISO-16840-3 - Wheelchair seating - Part 3: Determination of static, impact, and repetitive load strengths for postural support devices
- ISO-16840-4 - Wheelchair seating - Part 4: Seating systems for use in motor vehicles
- ISO-16840-6 - Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions
- ISO-16840-9 - Wheelchair seating - Part 9: Clinical interface pressure mapping guidelines for seating
- ISO-19894 - Walking trolleys - Requirements and test methods
- ISO-24415-1 - Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips
- ISO-24415-2 - Tips for assistive products for walking - Requirements and test methods - Part 2: Durability of tips for crutches
- ISO-6440 - Wheelchairs -- Nomenclature, terms and definitions
- ISO-7176-1 - Wheelchairs - Part 1: Determination of static stability
- ISO-7176-10 - Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
- ISO-7176-11 - Wheelchairs - Part 11: Test dummies
- ISO-7176-13 - Wheelchairs -- Part 13: Determination of coefficient of friction of test surfaces
- ISO-7176-14 - Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods
- ISO-7176-15 - Wheelchairs -- Part 15: Requirements for information disclosure, documentation and labelling
- ISO-7176-16 - Wheelchairs - Part 16: Resistance to ignition of postural support devices
- ISO-7176-19 - Wheelchairs - Part 19: Wheelchairs for use as seats in motor vehicles
- ISO-7176-19-AM1 - - Amendment 1: Annex G
- ISO-7176-2 - Wheelchairs - Part 2: Determination of dynamic stability of electrically powered wheelchairs
- ISO-7176-21 - Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
- ISO-7176-22 - Wheelchairs - Part 22: Set-up procedures
- ISO-7176-23 - Wheelchairs - Part 23: Requirements and test methods for attendant-operated stair-climbing devices
- ISO-7176-24 - Wheelchairs - Part 24: Requirements and test methods for user-operated stair-climbing devices
- ISO-7176-25 - Wheelchairs - Part 25: Lead-acid batteries and chargers for powered wheelchairs - Requirements and test methods
- ISO-7176-26 - Wheelchairs - Part 26: Vocabulary
- ISO-7176-28 - Wheelchairs - Part 28: Requirements and test methods for stair-climbing devices
- ISO-7176-3 - Wheelchairs - Part 3: Determination of effectiveness of brakes
- ISO-7176-30 - Wheelchairs - Part 30: Wheelchairs for changing occupant posture - Test methods and requirements
- ISO-7176-32 - Wheelchairs - Part 32: Test method for wheelchair castor assembly durability
- ISO-7176-4 - Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
- ISO-7176-5 - Wheelchairs - Part 5: Determination of dimensions, mass and manoeuvring space
- ISO-7176-6 - Wheelchairs - Part 6: Determination of maximum speed of electrically powered wheelchairs
- ISO-7176-7 - Wheelchairs -- Part 7: Measurement of seating and wheel dimensions
- ISO-7176-8 - Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths
- ISO-7176-9 - Wheelchairs - Part 9: Climatic tests for electric wheelchairs
- ISO-7193 - Wheelchairs -- Maximum overall dimensions
- ISO-9386-1 - Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 1: Vertical lifting platforms
- ISO-9386-2 - Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane
- ISO-9527 - Building construction -- Needs of disabled people in buildings -- Design guidelines
- ISO/DIS-10542-3 - Part 3: Docking-Type Tiedown Systems, Technical Systems & Aids for Disabled or Handicapped
- ISO/DIS-10542-5 - Part 5: Systems for Specific Wheelchairs, Technical Systems& Aids for Disabled or Handica
- ISO/DIS-16840-1 - Part 1: Measurement of Postural Support Surfaces & Body Segments - Vocabulary, Wheelchair
- ISO/DIS-7176-9 - Part 9: Climatic Tests for Electric Wheelchairs, Wheelchairs
Other SDOs:
- DIN-EN-ISO-10328 - Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods
- DIN-EN-ISO-10535 - Hoists for the Transfer of Disabled Persons - Requirements & Test Methods
- DIN-EN-ISO-11199-2 - Part 2: Rollators, Walking Aids Manipulated by Both Arms - Requirements & Test Methods
- DIN-EN-ISO-11199-3 - Part 3: Walking Tables, Walking Aids Manipulated by Both Arms - Requirements & Test Me
- DIN-EN-ISO-11334-1 - Part 1: Elbow Crutches, Assistive Products for Walking Manipulated by One Arm - Requir
- DIN-EN-ISO-22523 - External Limb Prostheses & External Orthoses - Requirements & Test Methods
- DIN-EN-ISO-22675 - Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods
- EN-12183 - Manual wheelchairs - Requirements and test methods
- EN-12184 - Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
- EN-81-40 - Part 40: Stairlifts & Inclined Lifting Platforms Intended for Persons With Impaired Mo
- EN-81-41 - Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
- EN-ISO-11199-1 - Part 1: Walking Frames, Walking Aids Manipulated by Both Arms - Requirements & Test Me
- EN-ISO-11199-2 - Part 2: Rollators, Walking Aids Manipulated by Both Arms - Requirements & Test Methods
- EN-ISO-11199-3 - Part 3: Walking Tables, Walking Aids Manipulated by Both Arms - Requirements & Test Me
- EN-ISO-11334-1 - Part 1: Elbow Crutches, Assistive Products for Walking Manipulated by One Arm - Requir
- EN-ISO-24415-1 - Part 1: Friction of Tips, Tips for Assistive Products for Walking - Requirements & Tes
- JIS-T-0901 - Guidelines for older persons and persons with disabilities -- Information presentation using electronic guiding and wayfinding system
- SIS-CWA-16697 - Car-Adaptations for Disabled Drivers - Requirements, test methods and best practise guidelines
- SS-774000 - Adaptations of cars for persons with reduced mobility
- SS-875001 - Wheelchairs - Maximum overall dimensions
- SS-EN-12182 - Assistive products for persons with disability - General requirements and test methods
- SS-EN-12183 - Manual wheelchairs - Requirements and test methods
- SS-EN-12184 - Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
- SS-EN-1985 - Walking aids - General requirements and test methods
- SS-EN-81-40 - Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
- SS-EN-81-41 - Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
- SS-EN-ISO-10328 - Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016)
- SS-EN-ISO-10535 - Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021)
- SS-EN-ISO-11199-1 - Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:2021)
- SS-EN-ISO-11199-2 - Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2021)
- SS-EN-ISO-11334-1 - Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007)
- SS-EN-ISO-11334-4 - Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999)
- SS-EN-ISO-21856 - Assistive products - General requirements and test methods (ISO 21856:2022)
- SS-EN-ISO-22675 - Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods (ISO 22675:2016)
- SS-EN-ISO-24415-1 - Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips (ISO 24415-1:2009)
- SS-ISO-10542-1 - Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems (ISO 10542-1:2012, IDT)
- SS-ISO-10542-1-AM1 - Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test methods for all systems Amendment 1: Annexes K, L, M (ISO 10542-1:2012/Amd 1:2021, IDT)
- SS-ISO-10865-2 - Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers (ISO 10865-2:2015, IDT)
- SS-ISO-16840-10 - Wheelchair seating Part 10: Resistance to ignition of postural support devices Requirements and test method (ISO 16840-10:2021, IDT)
- SS-ISO-16840-12 - Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing (ISO 16840-12:2021, IDT)
- SS-ISO-16840-13 - Wheelchair seating Part 13: Determination of the lateral stability property of a seat cushion (ISO 16840-13:2021, IDT)
- SS-ISO-16840-2 - Wheelchair seating - Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity (ISO 16840-2:2018, IDT)
- SS-ISO-16840-3 - Wheelchair seating - Part 3: Determination of static, impact and repetitive load strengths for postural support devices (ISO 16840-3:2022, IDT)
- SS-ISO-16840-6 - Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions (ISO 16840-6:2015, IDT)
- SS-ISO-17069 - Accessible design - Consideration and assistive products for accessible meeting (ISO 17069:2014, IDT)
- SS-ISO-24415-2 - Tips for assistive products for walking - Requirements and test methods - Part 2: Durability of tips for crutches (ISO 24415-2:2011, IDT)
- SS-ISO-7176-1 - Wheelchairs - Part 1: Determination of static stability (ISO 7176-1:2014, IDT)
- SS-ISO-7176-11 - Wheelchairs - Part 11: Test dummies (ISO 7176-11:2012, IDT)
- SS-ISO-7176-14 - Wheelchairs Part 14: Power and control systems for electrically powered wheelchairs and scooters Requirements and test methods (ISO 7176-14:2022, IDT)
- SS-ISO-7176-16 - Wheelchairs - Part 16: Resistance to ignition of postural support devices (ISO 7176-16:2012, IDT)
- SS-ISO-7176-19 - Wheelchairs - Part 19: Wheeled mobility devices for use in motor vehicles (ISO 7176-19:2008, IDT)
- SS-ISO-7176-19-AM1 - Wheelchairs Part 19:Wheeled mobility devices for use as seats in motor vehicles- AMENDMENT 1: Annex G (ISO 7176-19:2008/Amd 1:2015, IDT)
- SS-ISO-7176-22 - Wheelchairs - Part 22: Set-up procedures (ISO 7176-22:2014, IDT)
- SS-ISO-7176-25 - Wheelchairs - Part 25: Batteries and chargers for powered wheelchairs - Requirements and test methods (ISO 7176-25:2022, IDT)
- SS-ISO-7176-26 - Wheelchairs - Part 26 : Vocabulary (ISO 7176-26:2007, IDT)
- SS-ISO-7176-28 - Wheelchairs - Part 28: Requirements and test methods for stair-climbing devices (ISO 7176-28:2012, IDT)
- SS-ISO-7176-3 - Wheelchairs - Part 3: Determination of effectiveness of brakes (ISO 7176-3:2012, IDT)
- SS-ISO-7176-30 - Wheelchairs - Part 30: Wheelchairs for changing occupant posture - Test methods and requirements (ISO 7176-30:2018, IDT)
- SS-ISO-7176-32 - Wheelchairs - Part 32: Test method for wheelchair castor assembly durability (ISO 7176-32:2022, IDT)
- SS-ISO-7176-5 - Wheelchairs - Part 5: Determination of dimensions, mass and manoeuvring space (ISO 7176-5:2008, IDT)
- SS-ISO-7176-8 - Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths (ISO 7176-8:2014, IDT)
- SS-ISO-7176-9 - Wheelchairs - Part 9: Climatic tests for electric wheelchairs (ISO 7176-9:2009, IDT)