Document Center List of Standards on Wastes In General
ICS Code 13.030.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D5013 - Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM-D5283 - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
- ASTM-D6051 - Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
- ASTM-D6311 - Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
- ASTM-D6323 - Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
- ASTM-D6842 - Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making (Withdrawn 2015)
BSI:
- BIP-2102 - Environment management report. Focus on Waste Management
- BS-EN-12920 - Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditions
- BS-EN-12940 - Footwear manufacturing wastes. Waste classification and management
- BS-EN-13137 - Characterisation of waste. Determination of total organic carbon (TOC) in waste, sludges and sediments
- BS-EN-13193 - Packaging. Packaging and the environment. Terminology
- BS-EN-13965-2 - Characterization of waste. Terminology
- BS-EN-14039 - Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography.
- BS-EN-14345 - Characterization of waste. Determination of hydrocarbon content by gravimetry
- BS-EN-14346 - Characterization of waste. Calculation of dry matter by determination of dry residue or water content
- BS-EN-14429 - Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition
- BS-EN-14429-TC - Tracked Changes. Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition
- BS-EN-14735 - Characterization of waste. Preparation of waste samples for ecotoxicity tests
- BS-EN-14735-TC - Tracked Changes. Characterization of waste. Preparation of waste samples for ecotoxicity tests
- BS-EN-14803 - Waste management. Identification and/or determination of the quantity of waste
- BS-EN-14899 - Characterization of waste. Sampling of waste materials. Framework for the preparation and application of a sampling plan
- BS-EN-14997 - Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control
- BS-EN-14997-TC - Tracked Changes. Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control
- BS-EN-15002 - Characterization of waste. Preparation of test portions from the laboratory sample
- BS-EN-15002-TC - Tracked Changes. Characterization of waste. Preparation of test portions from the laboratory sample
- BS-EN-15527 - Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
- BS-EN-15933 - Sludge, treated biowaste and soil. Determination of pH
- BS-EN-15934 - Sludge, treated biowaste, soil and waste. Calculation of dry matter fraction after determination of dry residue or water content
- BS-EN-15935 - Soil, waste, treated biowaste and sludge. Determination of loss on ignition
- BS-EN-15936 - Soil, waste, treated biowaste and sludge. Determination of total organic carbon (TOC) by dry combustion
- BS-EN-15936-TC - Tracked Changes. Soil, waste, treated biowaste and sludge. Determination of total organic carbon (TOC) by dry combustion
- BS-EN-16123 - Characterization of waste. Guidance on selection and application of screening methods
- BS-EN-16166 - Soil, treated biowaste and sludge. Determination of adsorbed organically bound halogens (AOX)
- BS-EN-16166-TC - Tracked Changes. Soil, treated biowaste and sludge. Determination of adsorbed organically bound halogens (AOX)
- BS-EN-16167 - Soil, treated biowaste and sludge. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GCECD)
- BS-EN-16168 - Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method
- BS-EN-16169 - Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen
- BS-EN-16170 - Sludge, treated biowaste and soil. Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
- BS-EN-16171 - Sludge, treated biowaste and soil. Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
- BS-EN-16173 - Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements
- BS-EN-16174 - Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements
- BS-EN-16175-1 - Sludge, treated biowaste and soil. Determination of mercury
- BS-EN-16175-2 - Sludge, treated biowaste and soil. Determination of mercury
- BS-EN-16179 - Sludge, treated biowaste and soil. Guidance for sample pretreatment
- BS-EN-16181 - Soil, treated biowaste and sludge. Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- BS-EN-16190 - Soil, treated biowaste and sludge. Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
- BS-EN-16424 - Characterization of waste. Screening methods for the element composition by portable X-ray fluorescence instruments
- BS-EN-16457 - Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report
- BS-EN-17322 - Environmental Solid Matrices. Determination of polychlorinated biphenyls (PCB) by gas chromatography. mass selective detection (GC-MS) or electron-capture detection (GC-ECD)
- BS-EN-17503 - Soil, sludge, treated biowaste and waste. Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- BS-EN-ISO-10390 - Soil, treated biowaste and sludge. Determination of pH
- BS-EN-ISO-10390-TC - Tracked Changes. Soil, treated biowaste and sludge. Determination of pH
- BS-ISO-24161 - Waste collection and transportation management. Vocabulary
- DD-CEN-14429 - Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with initial acid/base addition
- DD-CEN-14997 - Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-control
- DD-CEN-15364 - Characterization of waste. Leaching behaviour tests. Acid and base neutralization capacity test
- DD-ENV-12940 - Footwear manufacturing wastes. Waste classification and management
- DD-ENV-13370 - Characterization of waste. Analysis of eluates. Determination of Ammonium-N, AOX, conductivity, Hg, phenol index, TOC, CN$u- easily liberatable, F$u-
- PAS-115 - Road sweeping and gully waste (non-hazardous). Materials derived for future use in soils or soil amendments. Specification
- PAS-138 - Disposal of manufacturing process waste containing manufactured nano-objects. Guide
- PAS-402 - Waste resource management. Specification for performance reporting
- PAS-402 (WELSH) - Waste resource management. Specification for performance reporting
- PD-CEN-15018 - Characterization of waste. Digestion of waste samples using alkali-fusion techniques
- PD-CEN-16023 - Characterization of waste. Determination of gross calorific value and calculation of net calorific value
- PD-CEN-16110 - Characterization of waste. Guidance on the use of ecotoxicity tests applied to waste
- PD-CEN-16193 - Sludge, treated biowaste and soil. Detection and enumeration of Escherichia coli
- PD-CEN-16363 - Characterization of waste. Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries
- PD-CEN-16376 - Characterization of waste. Overall guidance document for characterization of waste from the extractive industries
- PD-CEN-16660 - Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacity
- PD-CEN-17309 - Test methods for environmental characterization of solid matrices. Guide to flash point testing
- PD-CEN-17883 - Environmental characterization of eluates from leaching of waste and soil using reproductive and toxicological gene expression in Daphnia magna
- PD-CEN-17883-TC - Tracked Changes. Environmental characterization of eluates from leaching of waste and soil using reproductive and toxicological gene expression in Daphnia magna
- PD-CEN-17943 - Characterization of waste. Guidance on the determination of the content of elements and substances in waste
ISO:
Other SDOs:
- DIN-EN-12920 - Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions; German version EN 12920:2006+A1:2008
- DIN-EN-14039 - Characterization of Waste, Determination of Hydrocarbon Content in the Range of C10 To
- DIN-EN-14345 - Characterization of Waste, Determination of Hydrocarbon Content by Gravimetry
- DIN-EN-14346 - Characterization of Waste - Calculation of Dry Matter by Determination of Dry Residue
- DIN-EN-14735 - Characterization of Waste, Preparation of Waste Samples for Ecotoxicity Tests
- DIN-EN-14899 - Characterization of Waste - Sampling of Waste Materials - Framework for the Preparatio
- DIN-EN-15002 - Characterization of waste - Preparation of test portions from the laboratory sample; German version EN 15002:2015
- EN-12920 - Characterization of Waste - Methodology for the Determination of the Leaching Behaviou
- EN-12940 - Footwear manufacturing wastes. Waste classification and management
- EN-13137 - Characterization of Waste, Determination of Total Organic Carbon (Toc) in Waste, Sludg
- EN-13965-2 - Part 2: Management Related Terms & Definitions, Characterization of Waste - Terminolog
- EN-14039 - Characterization of Waste, Determination of Hydrocarbon Content in the Range of C10 To
- EN-14345 - Characterization of Waste, Determination of Hydrocarbon Content by Gravimetry
- EN-14346 - Characterization of Waste - Calculation of Dry Matter by Determination of Dry Residue
- EN-14429 - Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition
- EN-14735 - Characterization of Waste, Preparation of Waste Samples for Ecotoxicity Tests
- EN-14803 - Identification &/or Determination of the Quantity of Waste
- EN-14899 - Characterization of Waste - Sampling of Waste Materials - Framework for the Preparatio
- EN-14997 - Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control
- EN-15002 - Characterization of waste - Preparation of test portions from the laboratory sample
- EN-15527 - Characterization of Waste, Determination of Polycyclic Aromatic Hydrocarbons (Pah) In
- EN-15933 - Sludge, treated biowaste and soil - Determination of pH
- EN-15934 - Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content
- EN-15935 - Sludge, treated biowaste, soil and waste - Determination of loss on ignition
- EN-15936 - Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion
- EN-16123 - Characterization of waste - Guidance on selection and application of screening methods
- EN-16166 - Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX)
- EN-16167 - Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
- EN-16168 - Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method
- EN-16169 - Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen
- EN-16170 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
- EN-16171 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
- EN-16173 - Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
- EN-16174 - Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
- EN-16175-1 - Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)
- EN-16175-2 - Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
- EN-16179 - Sludge, treated biowaste and soil - Guidance for sample pretreatment
- EN-16181 - Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- EN-16190 - Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
- EN-16424 - Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments
- EN-16457 - Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report
- SIS-CEN-17309 - Test methods for environmental characterization of solid matrices - Guide to flash point testing
- SIS-CEN/TR-15018 - Characterization of waste - Digestion of waste samples using alkali-fusion techniques
- SIS-CEN/TR-16110 - Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste
- SIS-CEN/TR-16176 - Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification
- SIS-CEN/TR-16184 - Characterization of Waste - State-of-the-art document - Analysis of eluates
- SIS-CEN/TR-16193 - Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli
- SIS-CEN/TR-16363 - Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries
- SIS-CEN/TR-16376 - Characterization of waste - Overall guidance document for characterization of waste from the extractive industries
- SIS-CEN/TS-14429 - Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition
- SIS-CEN/TS-14997 - Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continous pH-control
- SIS-CEN/TS-15364 - Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test
- SIS-CEN/TS-15937 - Sludge, treated biowaste and soil - Determination of specific electrical conductivity
- SIS-CEN/TS-16023 - Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- SIS-CEN/TS-16170 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
- SIS-CEN/TS-16171 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
- SIS-CEN/TS-16172 - Sludge, treated biowaste and soil - Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS)
- SIS-CEN/TS-16175-1 - Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)
- SIS-CEN/TS-16175-2 - Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
- SIS-CEN/TS-16177 - Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite
- SIS-CEN/TS-16182 - Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)
- SIS-CEN/TS-16183 - Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS)
- SIS-CEN/TS-16188 - Sludge, treated biowaste and soil - Determination of elements in aqua regia and nitric acid digests - Flame atomic absorption spectrometry method (FAAS)
- SIS-CEN/TS-16189 - Sludge, treated biowaste and soil - Determination of linear alkylbenzene sulfonates (LAS) by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD) or mass selective detection (MS)
- SIS-CEN/TS-16190 - Sludge, treated biowaste and soil - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
- SIS-CEN/TS-16229 - Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds
- SIS-CEN/TS-16660 - Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity
- SIS-CEN/TS-17883 - Environmental characterization of leachates from waste and soil using reproductive and toxicological gene expression in Daphnia magna
- SS-EN-12920 - Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions
- SS-EN-12940 - Footwear manufacturing wastes - Waste classification and management
- SS-EN-13193 - Packaging - Packaging and the environment - Terminology
- SS-EN-13965-1 - Characterization of waste - Terminology - Part 1: Material related terms and definitions
- SS-EN-13965-2 - Characterization of waste - Terminology - Part 2: Management related terms and definitions
- SS-EN-14039 - Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
- SS-EN-14345 - Characterization of waste - Determination of hydrocarbon content by gravimetry
- SS-EN-14346 - Characterization of waste - Calculation of dry matter by determination of dry residue and water content
- SS-EN-14429 - Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition
- SS-EN-14735 - Characterization of waste - Preparation of waste samples for ecotoxicity tests
- SS-EN-14803 - Identification and/or determination of the quantity of waste
- SS-EN-14899 - Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan
- SS-EN-14997 - Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control
- SS-EN-15002 - Characterization of waste - Preparation of test portions from the laboratory sample
- SS-EN-15527 - Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
- SS-EN-15933 - Sludge, treated biowaste and soil - Determination of pH
- SS-EN-15934 - Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content
- SS-EN-15935 - Soil, waste, treated biowaste and sludge - Determination of loss on ignition
- SS-EN-15936 - Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustion
- SS-EN-16123 - Characterization of waste - Guidance on selection and application of screening methods
- SS-EN-16166 - Soil, treated biowaste and sludge - Determination of adsorbed organically bound halogens (AOX)
- SS-EN-16167 - Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
- SS-EN-16168 - Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method
- SS-EN-16169 - Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen
- SS-EN-16170 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
- SS-EN-16171 - Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)
- SS-EN-16173 - Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
- SS-EN-16174 - Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
- SS-EN-16175-1 - Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)
- SS-EN-16175-2 - Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
- SS-EN-16179 - Sludge, treated biowaste and soil - Guidance for sample pretreatment
- SS-EN-16181 - Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- SS-EN-16190 - Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
- SS-EN-16424 - Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments
- SS-EN-16457 - Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report
- SS-EN-17322 - Environmental Solid Matrices - Determination of polychlorinated biphenyls (PCB) by gas chromatography - mass selective detection (GC-MS) or electron-capture detection (GC-ECD)
- SS-EN-17503 - Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
- SS-EN-1993-6 - Eurocode 3: Design of steel structures - Part 6 : Crane supporting structures
- SS-EN-ISO-3691-5-AM1 - Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks - Amendment 1 (ISO 3691-5:2014/Amd 1:2020)
- SS-ENV-12506 - Charaterization of waste - Analysis of eluates - Determination of pH, As, Cd, Cr, V1, Cu, Ni, Pb, Zn, C1, NO2-, SO4 2-
- SS-ENV-12920 - Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions
- SS-ISO-24161 - Waste collection and transportation management Vocabulary (ISO 24161:2022, IDT)