Document Center List of Standards on Solid Wastes
ICS Code 13.030.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1308 - Standard Test Method for Accelerated Leach Test for Measuring Contaminant Releases From Solidified Waste
- ASTM-D4503 - Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion (Withdrawn 2012)
- ASTM-D4687 - Standard Guide for General Planning of Waste Sampling
- ASTM-D4842 - Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
- ASTM-D4843 - Standard Test Method for Wetting and Drying Test of Solid Wastes
- ASTM-D5198 - Standard Practice for Nitric Acid Digestion of Solid Waste
- ASTM-D5231 - Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
- ASTM-D5232 - Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM-D5368 - Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014)
- ASTM-D5744 - Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM-D5951 - Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing (Withdrawn 2011)
- ASTM-D5988 - Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
- ASTM-D6002 - Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics (Withdrawn 2011)
- ASTM-D6003 - Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005)
- ASTM-D6826 - Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
- ASTM-D8064 - Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
- ASTM-D8187 - Standard Guide for Interpretation of Standard Humidity Cell Test Results
- ASTM-E1109 - Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM-E701 - Standard Test Methods for Municipal Ferrous Scrap
- ASTM-E702 - Standard Specification for Municipal Ferrous Scrap
- ASTM-E753 - Specification for Municipal Aluminum Scrap (MAS) (Withdrawn 2001)
- ASTM-E884 - Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities (Withdrawn 2021)
- ASTM-E889 - Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM-E956 - Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
BSI:
- BS-EN-12457-1 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12457-2 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12457-3 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-12457-4 - Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges
- BS-EN-14405 - Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
- BS-EN-14405-TC - Tracked Changes. Characterization of waste. Leaching behaviour test. Up-flow percolation test (under specified conditions)
- BS-EN-15192 - Characterisation of waste and soil. Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
- BS-EN-15308 - Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- BS-EN-15308-TC - Tracked Changes. Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- BS-EN-15309 - Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence
- BS-EN-15863 - Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
- BS-EN-15863-TC - Tracked Changes. Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
- BS-EN-15875 - Characterisation of waste. Static test for determination of acid potential and neutralisation potential of sulfidic waste
- BS-EN-16377 - Characterization of waste. Determination of brominated flame retardants (BFR) in solid waste
- BS-EN-17322 - Environmental Solid Matrices. Determination of polychlorinated biphenyls (PCB) by gas chromatography. mass selective detection (GC-MS) or electron-capture detection (GC-ECD)
- BS-EN-IEC-63000 - Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
- BS-EN-IEC-63000-TC - Tracked Changes. Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
- DD-CEN-14405 - Characterization of waste. Leaching behaviour tests. Up-flow percolation test (under specified conditions)
- PD-CEN-14589 - Characterization of waste. State of the art document. Chromium VI specification in solid matrices
- PD-CEN-15310-1 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-2 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-3 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-4 - Characterization of waste. Sampling of waste materials
- PD-CEN-15310-5 - Characterization of waste. Sampling of waste materials
- PD-CEN-15862 - Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
- PD-CEN-15863 - Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions
- PD-CEN-15864 - Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
- PD-CEN-15864-TC - Tracked Changes. Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
- PD-CEN-16365 - Characterization of waste. Sampling of waste from extractive industries
- PD-CEN-16675 - Waste. Test methods for the determination of the monolithic status of waste to be landfilled
- PD-CEN-16675-TC - Tracked Changes. Waste. Test methods for the determination of the monolithic status of waste to be landfilled
- PD-IEC/PAS-63015 - Definition of Low-Halogen for electronic products
IEC:
- IEC-63000 - Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
- IEC/PAS-63015 - Definition of "Low-Halogen" for electronic products
ISO:
Other SDOs:
- DIN-EN-15192 - Characterization of Waste & Soil - Determination of Chromium(VI) in Solid Material By
- EN-14405 - Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
- EN-15192 - Characterization of Waste & Soil - Determination of Chromium(VI) in Solid Material By
- EN-15308 - Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- EN-15309 - Characterization of Waste & Soil, Determination of Elemental Composition by X-Ray Fluo
- EN-15863 - Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
- EN-15875 - Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste
- EN-16377 - Characterization of waste - Determination of brominated flame retardants (BFR) in solid wast
- SIS-CEN/TR-15310-1 - Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions
- SIS-CEN/TR-15310-2 - Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques
- SIS-CEN/TR-15310-3 - Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field
- SIS-CEN/TR-15310-4 - Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery
- SIS-CEN/TR-15310-5 - Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan
- SIS-CEN/TR-16365 - Characterization of waste - Sampling of waste from extractive industries
- SIS-CEN/TS-14405 - Characterization of waste - Leaching behaviour tests - Up-flow percolation test (under specified conditions)
- SIS-CEN/TS-15864 - Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
- SIS-CEN/TS-16675 - Waste - Test methods for the determination of the monolithic status of waste to be landfilled
- SS-EN-12457-1 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
- SS-EN-12457-2 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
- SS-EN-12457-3 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
- SS-EN-12457-4 - Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
- SS-EN-13137 - Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
- SS-EN-14405 - Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
- SS-EN-14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- SS-EN-15192 - Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
- SS-EN-15308 - Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
- SS-EN-15309 - Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence
- SS-EN-15863 - Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
- SS-EN-15875 - Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste
- SS-EN-16377 - Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste
- SS-EN-17322 - Environmental Solid Matrices - Determination of polychlorinated biphenyls (PCB) by gas chromatography - mass selective detection (GC-MS) or electron-capture detection (GC-ECD)
- SS-EN-ISO-15192 - Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2021)
- SS-ISO-11932 - Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste