Document Center List of Standards on Installations And Equipment For Waste Disposal And Treatment Including Street Cleaning Equipment, Waste Containers, Incineration And Compaction Equipment, Equipment For Dumping Of Refuse, Landfill Sites, Etc. Waste Collection Vehicles, See 43.160 Waste Chutes, See 91.140.70 Food Waste Disposal Units, See 97.040.50
ICS Code 13.030.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1317 - Standard Practice for Dissolution of Silicate or Acid-Resistant Matrix Samples (Withdrawn 2001)
- ASTM-D1973 - Standard Guide for Design of a Liner System for Containment of Wastes (Withdrawn 2000)
- ASTM-D4793 - Standard Test Method for Sequential Batch Extraction of Waste with Water
- ASTM-D4844 - Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection (Withdrawn 2025)
- ASTM-D4874 - Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021)
- ASTM-D4978 - Standard Test Methods for Screening of Reactive Sulfides in Waste
- ASTM-D4979 - Standard Practice for Physical Description Screening Analysis in Waste
- ASTM-D4980 - Standard Test Methods for Screening of pH in Waste (Withdrawn 2009)
- ASTM-D4981 - Standard Practice for Screening of Oxidizers in Waste
- ASTM-D4982 - Standard Test Methods for Flammability Potential Screening Analysis of Waste
- ASTM-D5057 - Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
- ASTM-D5058 - Standard Practices for Compatibility of Screening Analysis of Waste
- ASTM-D5088 - Standard Practice for Decontamination of Field Equipment Used at Waste Sites
- ASTM-D5233 - Standard Test Method for Single Batch Extraction Method for Wastes
- ASTM-D5284 - Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
- ASTM-D5468 - Standard Test Method for Gross Calorific and Ash Value of Waste Materials (Withdrawn 2016)
- ASTM-D5525 - Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002)
- ASTM-D5526 - Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
- ASTM-D5658 - Standard Practice for Sampling Unconsolidated Waste from Trucks
- ASTM-D5679 - Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
- ASTM-D5680 - Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
- ASTM-D5879 - Standard Practice for Surface Site Characterization for On-Site Septic Systems
- ASTM-D5919 - Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
- ASTM-D5956 - Standard Guide for Sampling Strategies for Heterogeneous Wastes
- ASTM-D5975 - Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
- ASTM-D6009 - Standard Guide for Sampling Waste Piles
- ASTM-D6312 - Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities
- ASTM-D6340 - Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment (Withdrawn 2016)
- ASTM-D6346 - Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
- ASTM-D6388 - Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
- ASTM-D6523 - Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
- ASTM-D6597 - Standard Practice for Assessment of Attaining Clean Up Level for Site Closure (Withdrawn 2016)
- ASTM-D7204 - Standard Practice for Sampling Waste Streams on Conveyors
- ASTM-D7475 - Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
- ASTM-E1076 - Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities (Withdrawn 2010)
- ASTM-E1108 - Standard Test Method for Determination of the Recovery of a Product in a
Materials Separation Device - ASTM-E1279 - Standard Test Method for Biodegradation By a Shake-Flask Die-Away Method (Withdrawn 2013)
- ASTM-E1609 - Standard Guide for Development and Implementation of a Pollution Prevention Program (Withdrawn 2010)
- ASTM-E1760 - Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
- ASTM-E1908 - Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
- ASTM-E2060 - Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
- ASTM-E2740 - Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
- ASTM-E2831 - Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
- ASTM-E3033 - Standard Guide for Beneficial Use of Landfills and Chemically Impacted Sites (Withdrawn 2025)
- ASTM-E658 - Test Method for Efficacy of Dog Repellents Designed for Direct Application to Garbage Bags (Withdrawn 2000)
- ASTM-E884 - Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities (Withdrawn 2021)
- ASTM-E889 - Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM-E959 - Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
- ASTM-ES16 - Practice for Generation of Environmental Data Related to Waste Management Activities (Withdrawn 1992)
- ASTM-F1150 - Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
- ASTM-F1322 - Standard Guide for Selection of Shipboard Incinerators
- ASTM-F1673 - Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM-F1780 - Standard Guide for Estimating Oil Spill Recovery System Effectiveness
- ASTM-F1799 - Standard Guide for Shipboard Generated Waste Management Audits
- ASTM-F1899 - Standard Specification for Food Waste Pulper Without Waterpress Assembly
- ASTM-F2084 - Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
- ASTM-F2966 - Standard Guide for Snow and Ice Control for Walkway Surfaces
- ASTM-F3215 - Standard Specification for Food Waste Dehydrators
- ASTM-F873 - Standard Guide for Incinerating Oil Spill Wastes at Temporary Field Locations (Withdrawn 2010)
- ASTM-F917 - Standard Specification for Commercial Food Waste Disposers
BSI:
- BS-1703 - Refuse chutes and hoppers. Specification
- BS-3813-1 - Specification for incinerators for waste from trade and residential premises. Capacities between 50 lb/h and 1000 lb/h
- BS-5832 - Specification for compacted waste containers for lift-off vehicles
- BS-5906 - Waste management in buildings. Code of practice
- BS-792 - Specification for mild steel dustbins
- BS-8520-1 - Equipment used in the controlled removal of asbestos-containing materials
- BS-8520-2 - Equipment used in the controlled removal of asbestos-containing materials
- BS-8520-3 - Equipment used in the controlled removal of asbestos-containing materials
- BS-EN-12574-1 - Stationary waste containers
- BS-EN-12574-1-TC - Tracked Changes. Stationary waste containers
- BS-EN-12574-2 - Stationary waste containers
- BS-EN-12574-2-TC - Tracked Changes. Stationary waste containers
- BS-EN-12574-3 - Stationary waste containers
- BS-EN-12574-3-TC - Tracked Changes. Stationary waste containers
- BS-EN-13071 - Selective Waste Collection Containers, Above-Ground Mechanically-Lifed Containers With
- BS-EN-13071-1 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied
- BS-EN-13071-2 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied
- BS-EN-13071-3 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied
- BS-EN-13592 - Plastics sacks for household waste collection. Types, requirements and test methods
- BS-EN-13592-TC - Tracked Changes. Plastics sacks for household waste collection. Types, requirements and test methods
- BS-EN-13593 - Packaging. Paper sacks for household waste collection. Types, requirements and test methods
- BS-EN-13656 - Soil, treated biowaste, sludge and waste. Digestion with a hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4) or hydrofluoric (HF) acid mixture for subsequent determination of elements
- BS-EN-13657 - Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements
- BS-EN-14582 - Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods
- BS-EN-14582-TC - Tracked Changes. Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods
- BS-EN-15132 - Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
- BS-EN-15144 - Winter maintenance equipment. Terminology. Terms for winter maintenance
- BS-EN-15169 - Characterization of waste. Determination of loss on ignition in waste, sludge and sediments
- BS-EN-15518-1 - Winter maintenance equipment. Road weather information systems
- BS-EN-15518-2 - Winter maintenance equipment. Road weather information systems
- BS-EN-15518-3 - Winter maintenance equipment. Road weather information systems
- BS-EN-15518-3-TC - Tracked Changes. Winter maintenance equipment. Road weather information systems
- BS-EN-15597-1 - Winter maintenance equipment. Spreading and spraying machines
- BS-EN-15597-1-TC - Tracked Changes. Winter maintenance equipment. Spreading and spraying machines
- BS-EN-16252 - Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
- BS-EN-16500 - Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
- BS-EN-16811-1 - Winter service equipment and products. De-icing agents
- BS-EN-16811-2 - Winter service equipment and products. De-icing agents
- BS-EN-17366 - Waste management. Access control to collection containers. Identification and authorization
- BS-EN-17367 - Waste Management. Data communication between communication management system and the back office system for stationary waste collection containers. Functional specification and the semantic data model
- BS-EN-17443 - Winter service equipment. Brine production systems. Requirements and test methods
- BS-EN-50574 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- BS-EN-50574-1 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- BS-EN-840-1 - Mobile waste and recycling containers
- BS-EN-840-2 - Mobile waste and recycling containers
- BS-EN-840-2-TC - Tracked Changes. Mobile waste and recycling containers
- BS-EN-840-3 - Mobile waste and recycling containers
- BS-EN-840-3-TC - Tracked Changes. Mobile waste and recycling containers
- BS-EN-840-4 - Mobile waste and recycling containers
- BS-EN-840-4-TC - Tracked Changes. Mobile waste and recycling containers
- BS-EN-840-5 - Mobile waste and recycling containers
- BS-EN-840-5-TC - Tracked Changes. Mobile waste and recycling containers
- BS-EN-840-6 - Mobile waste and recycling containers
- BS-EN-840-6-TC - Tracked Changes. Mobile waste and recycling containers
- BS-ISO-13617 - Ships and marine technology. Shipboard incinerators. Requirements
- BS-ISO-18309 - Ships and marine technology. Incinerator sizing and selection. Guidelines
- BS-ISO-23044 - Guidelines for softening and desalination of industrial wastewater for reuse
- DD-CEN-15366 - Winter and road service area maintenance equipment. Solid absorbents intended for road usage
- DD-ENV-12506 - Characterization of waste. Analysis of eluates. Determination of pH, As, Cd, Cr VI, Cu, Ni, Pb, Zn, Cl-, NO2-, SO42-
- PAS-60-1 - Equipment used in the controlled removal of asbestos-containing materials
- PAS-60-2 - Equipment used in the controlled removal of asbestos-containing materials
- PAS-60-3 - Equipment used in the controlled removal of asbestos-containing materials
- PD-CEN-13768 - Characterization of sludges. Good practice for combined incineration of sludges and household wastes
- PD-CEN-14745 - Solid recovered fuels
- PD-CEN-15518-4 - Winter maintenance equipment. Road weather information systems
- PD-CEN-15518-4-TC - Tracked Changes. Winter maintenance equipment. Road weather information systems
- PD-CEN-15584 - Characterisation of sludges. Guide to risk assessment especially in relation to use and disposal of sludges
- PD-CEN-16811-3 - Winter maintenance equipment. De-icing agents
- PD-CEN-17345 - Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection
- PD-CLC-50574-2 - Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- PD-CR-13768 - Characterization of Sludges, Good Practice for Combined Incineration of Sludges & Hous
ISO:
- ISO-11144 - Dental equipment - Connections for supply and waste lines
- ISO-11599 - Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
- ISO-13617 - Ships and marine technology - Shipboard incinerators - Requirements
- ISO-18309 - Ships and marine technology - Incinerator sizing and selection - Guidelines
- ISO-23043 - Evaluation methods for industrial wastewater treatment reuse processes
- ISO-23044 - Guidelines for softening and desalination of industrial wastewater for reuse
Other SDOs:
- DIN-30750 - Mobile, Non-Sewer-Connected Toilet Cabins - Requirements & Service Relating To the Dep
- DIN-EN-12574-1 - Stationary waste containers - Part 1: Containers with a capacity up to 10000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design; German version EN 12574-1:2017
- DIN-EN-12574-2 - Stationary waste containers - Part 2: Performance requirements and test methods; German version EN 12574-2:2017
- DIN-EN-12574-3 - Stationary waste containers - Part 3: Safety and health requirements; German version EN 12574-3:2017
- DIN-EN-13592 - Plastics sacks for household waste collection - Types, requirements and test methods; German version EN 13592:2017
- DIN-EN-14582 - Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2016
- DIN-EN-14803 - Identification &/or Determination of the Quantity of Waste
- DIN-EN-15132 - Container Shells for Mobile Waste Containers With a Capacity Up To 1 700 I - Performan
- DIN-EN-15169 - Characterization of Waste - Determination of Loss on Ignition in Waste, Sludge & Sedim
- DIN-EN-840-1 - Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
- DIN-EN-840-2 - Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design
- DIN-EN-840-3 - Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design
- DIN-EN-840-4 - Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
- DIN-EN-840-5 - Mobile waste and recycling containers - Part 5: Performance requirements and test methods
- DIN-EN-840-6 - Mobile waste and recycling containers - Part 6: Safety and health requirements
- DS-EN-840-1 - Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
- DS-EN-840-5 - Mobile waste and recycling containers - Part 5: Performance requirements and test methods
- EN-12574-1 - Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design
- EN-12574-2 - Stationary waste containers - Part 2: Performance requirements and test methods
- EN-12574-3 - Stationary waste containers - Part 3: Safety and health requirements
- EN-13071 - Selective Waste Collection Containers, Above-Ground Mechanically-Lifted Containers Wit
- EN-13071-1 - Stationary Waste Containers Up To 5000 I, Top Lifted & Bottom Emptied, General Require
- EN-13071-2 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
- EN-13071-3 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
- EN-13592 - Plastics sacks for household waste collection - Types, requirements and test methods
- EN-14582 - Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
- EN-15132 - Container Shells for Mobile Waste Containers With a Capacity Up To 1 700 I - Performan
- EN-15144 - Winter Maintenance Equipment, Terminology, Terms for Winter Maintenance
- EN-15169 - Characterization of Waste - Determination of Loss on Ignition in Waste, Sludge & Sedim
- EN-15518-1 - Part 1: Global Definitions & Components, Winter Maintenance Equipment - Road Weather
- EN-15518-2 - Part 2: Road Winter - Recommended Observation & Forecast, Winter Maintenance Equipment
- EN-15518-3 - Part 3: Requirements on Measured Values of Stationary Equipments, Winter Maintenance E
- EN-15597-1 - Winter maintenance equipment - Spreading machines (gritting machines) - Part 1: General requirements and definitions for spreading machines
- EN-16252 - Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
- EN-16500 - Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
- EN-16811-1 - Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods
- EN-16811-2 - Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods
- EN-50574 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- EN-50574-1 - Collection, logistics and treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
- EN-840-1 - Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
- EN-840-2 - Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design
- EN-840-3 - Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design
- EN-840-4 - Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
- EN-840-5 - Mobile waste and recycling containers - Part 5: Performance requirements and test methods
- EN-840-6 - Mobile waste and recycling containers - Part 6: Safety and health requirements
- SIS-CEN/TR-13768 - Characterisation of sludges - Good practice for combined incineration of sludges and household wastes
- SIS-CEN/TR-15584 - Characterisation of sludges - Guide to risk assessment especially in relation to use and disposal of sludges
- SIS-CEN/TR-17345 - Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection
- SIS-CEN/TS-16229 - Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds
- SIS-CEN/TS-16811-3 - Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods
- SS-EN-12216 - Shutters, external blinds, internal blinds - Terminology, glossary and definitions
- SS-EN-12574-1 - Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design
- SS-EN-12574-2 - Stationary waste containers - Part 2: Performance requirements and test methods
- SS-EN-12574-3 - Stationary waste containers - Part 3: Safety and health requirements
- SS-EN-12619 - Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
- SS-EN-13071 - Selective waste collection containers - Above-ground mechanically-lifted containers with capacities from 80 l to 5000 l for selective collection of waste
- SS-EN-13071-1 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
- SS-EN-13071-2 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
- SS-EN-13071-3 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
- SS-EN-13592 - Plastics sacks for household waste collection - Types, requirements and test methods
- SS-EN-13656 - Soil, treated biowaste, sludge and waste - Digestion with a hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4) or hydrofluoric (HF) acid mixture for subsequent determination of elements
- SS-EN-13657 - Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
- SS-EN-14582 - Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
- SS-EN-14803 - Identification and/or determination of the quantity of waste
- SS-EN-15132 - Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods
- SS-EN-15144 - Winter maintenance equipment - Terminology - Terms for winter maintenance
- SS-EN-15169 - Characterization of waste - Determination of loss on ignition in waste, sludge and sediments
- SS-EN-15170 - Characterization of sludges - Determination of calorific value
- SS-EN-15398 - Resilient, textile, laminate and modular mechanical locked floor coverings (MMF) - Floor covering standard symbols - Complementary element
- SS-EN-15518-1 - Winter maintenance equipment - Road weather information systems - Part 1: Global definitions and components
- SS-EN-15518-2 - Winter maintenance equipment - Road weather information systems - Part 2: Road weather - Recommended observation and forecast
- SS-EN-15518-3 - Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipments
- SS-EN-15597-1 - Winter maintenance equipment - Spreading and spraying machines - Part 1: General requirements and definitions
- SS-EN-15597-2 - Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test
- SS-EN-15935 - Soil, waste, treated biowaste and sludge - Determination of loss on ignition
- SS-EN-16252 - Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
- SS-EN-16486 - Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
- SS-EN-16500 - Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
- SS-EN-16811-1 - Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods
- SS-EN-16811-2 - Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods
- SS-EN-17366 - Waste management - Access control to collection containers - Identification and authorization
- SS-EN-17443 - Winter service equipment - Brine production systems - Requirements and test methods
- SS-EN-840-1 - Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design
- SS-EN-840-2 - Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design
- SS-EN-840-3 - Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design
- SS-EN-840-4 - Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
- SS-EN-840-5 - Mobile waste and recycling containers - Part 5: Performance requirements and test methods
- SS-EN-840-5-AM1 - Mobile waste containers - Part 5: Performance requirements and test methods
- SS-EN-840-6 - Mobile waste and recycling containers - Part 6: Safety and health requirements
- SS-EN-ISO-14438 - Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002)
- SS-EN-ISO-3691-5-AM1 - Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks - Amendment 1 (ISO 3691-5:2014/Amd 1:2020)
- SS-EN-ISO-4254-6 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
- SS-EN-ISO-75-2 - Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
- SS-ENV-13370 - Characterization of waste - Analysis of eluates - Determination of Ammonium - N, AOX, conductivity, Hg, phenol index, TOC, CN¯ easily liberatable, F¯
- SS-ISO-10002 - Quality management - Customer satisfaction - Guidelines for complaints handling in organizations (ISO 10002:2018, IDT)
- SS-ISO-11599 - Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste (ISO 11599:1997, IDT)
- SS-ISO-13617 - Ships and marine technology - Shipboard incinerators - Requirements (ISO 13617:2019, IDT)