Document Center List of Standards on Other Standards Related To Wastes Including Waste Prevention
ICS Code 13.030.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D5071 - Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
- ASTM-D5509 - Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002)
- ASTM-D5511 - Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
- ASTM-D5512 - Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002)
- ASTM-D5680 - Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
- ASTM-D5681 - Standard Terminology for Waste and Waste Management
- ASTM-D5792 - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
- ASTM-D6235 - Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
- ASTM-D6323 - Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
- ASTM-D6691 - Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
- ASTM-D6868 - Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
- ASTM-D7354 - Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
- ASTM-D7355 - Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings (Withdrawn 2019)
- ASTM-D7473 - Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
- ASTM-E1798 - Standard Test Method for Assessing Treatability or Biodegradability, or Both, of Organic Chemicals in Porous Pots (Withdrawn 2013)
- ASTM-E2278 - Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
- ASTM-E2306 - Standard Guide for Disposal of Personal Property Assets
- ASTM-E2893 - Standard Guide for Greener Cleanups
- ASTM-E2979 - Standard Classification for Discarded Materials from Manufacturing Facilities and Associated Support Facilities
- ASTM-E3073 - Standard Guide for Development of Waste Management Plan for Construction, Deconstruction, or Demolition Projects
BSI:
- BS-EN-12506 - Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl$u-, Co, Cr, Cr VI, Cu, Mo, Ni, NO2$u-, Pb, total S, SO42$u-, V and Zn
- BS-EN-13370 - Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN$u-, F$u-
- BS-EN-13427 - Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste
- BS-EN-13428 - Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction
- BS-EN-13431 - Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
- BS-EN-14045 - Packaging. Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
- BS-EN-14806 - Packaging. Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
- BS-EN-14995 - Plastics. Evaluation of compostability. Test scheme and specifications
- BS-EN-16192 - Characterization of waste. Analysis of eluates
- BS-EN-17417 - Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions. Method by measurement of pressure increase
- BS-EN-50625-1 - Collection, logistics & Treatment requirements for WEEE
- BS-EN-50625-2-1 - Collection, logistics and treatment requirements for WEEE
- BS-EN-50625-2-2 - Collection, logistics & treatment requirements for WEEE
- BS-EN-50625-2-3 - Collection, logistics & treatment requirements for WEEE
- BS-EN-50625-2-3-TC - Tracked Changes. Collection, logistics & treatment requirements for WEEE
- BS-EN-50625-2-4 - Collection, logistics & treatment requirements for WEEE
- BS-EN-ISO-14855-1 - Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide
- CWA-16833 - Glossary of Terms for Holistic Management of Brownfield Regeneration (GoT-HOMBRE)
- PAS-100 - Specification for composted materials
- PD-CEN-16192 - Waste. Guidance on analysis of eluates
- PD-CEN-16192-TC - Tracked Changes. Waste. Guidance on analysis of eluates
- PD-CLC-50625-3-1 - Collection, logistics & treatment requirements for WEEE
- PD-CLC-50625-3-2 - Collection, logistics & treatment requirements for WEEE
- PD-CLC-50625-3-3 - Collection, logistics & treatment requirements for WEEE. Specification for de-pollution. WEEE containing CRTs and flat panel displays
- PD-CLC-50625-3-4 - Collection, logistics & treatment requirements for WEEE. Specification for de-pollution. Temperature exchange equipment
- PD-CLC-50625-3-5 - Collection, logistics & Treatment requirements for WEEE
- PD-CLC-50625-4 - Collection, logistics & treatment requirements for WEEE
Other SDOs:
- DIN-EN-13427 - Packaging, Requirements for the Use of European Standards in the Field of Packaging &
- DIN-EN-13428 - Packaging - Requirements Specific To Manufacturing & Composition, Prevention by Source
- DIN-EN-13431 - Packaging, Requirements for Packaging Recoverable in the Form of Energy Recovery, Incl
- DIN-EN-14806 - Packaging, Preliminary Evaluation of the Disintegration of Packaging Materials Under S
- DIN-EN-14995 - Plastics - Evaluation of Compostability - Test Scheme & Specifications
- EN-13427 - Packaging - Requirements for the Use of European Standards in the Field of Packaging &
- EN-13428 - Packaging - Requirements Specific To Manufacturing & Composition, Prevention by Source
- EN-13431 - Packaging - Requirements for Packaging Recoverable in the Form of Energy Recovery, Inc
- EN-14806 - Packaging, Preliminary Evaluation of the Disintegration of Packaging Materials Under S
- EN-14995 - Plastics - Evaluation of Compostability - Test Scheme & Specifications
- EN-16192 - Characterization of waste - Analysis of eluates
- EN-50625-1 - Collection, logistics and Treatment requirements for WEEE - Part 1: General treatment requirements
- EN-50625-2-1 - Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
- EN-50625-2-2 - Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays
- EN-50625-2-3 - Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatment requirements for temperature exchange equipment and other WEEE containing VFC and/or VHC
- EN-50625-2-4 - Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels
- SIS-CEN/TR-15822 - Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues
- SIS-CEN/TR-16184 - Characterization of Waste - State-of-the-art document - Analysis of eluates
- SIS-CEN/TR-16192 - Waste - Guidance on analysis of eluates
- SS-EN-12506 - Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, CI¯, Co, Cr, Cr VI, Cu, Mo, Ni, NO2¯, Pb, total S, SO4²-, V and Zn
- SS-EN-13370 - Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN¯, F¯
- SS-EN-13427 - Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste
- SS-EN-13428 - Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
- SS-EN-13431 - Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
- SS-EN-13432 - Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
- SS-EN-14045 - Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
- SS-EN-14046 - Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions- Method by analysis of released carbon dioxide
- SS-EN-14806 - Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
- SS-EN-14995 - Plastics - Evaluation of compostability - Test scheme and specifications
- SS-EN-16192 - Characterization of waste - Analysis of eluates
- SS-EN-17417 - Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions - Method by measurement of pressure increase
- SS-EN-17427 - Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations
- SS-EN-ISO-14855-1 - Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012)
- SS-EN-ISO-14855-2 - Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (ISO 14855-2:2018)