Document Center List of Standards on Hydrological Properties Of Soils
ICS Code 13.080.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D4520 - Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
- ASTM-D4643 - Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
- ASTM-D4944 - Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
- ASTM-D4959 - Standard Test Method for Determination of Water Content of Soil By Direct Heating
- ASTM-D5220 - Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
- ASTM-D5407 - Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement (Withdrawn 2005)
- ASTM-D5520 - Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
- ASTM-D5715 - Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
- ASTM-D6565 - Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method (Withdrawn 2014)
- ASTM-D6642 - Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux (Withdrawn 2015)
- ASTM-D6836 - Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
- ASTM-D7100 - Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
- ASTM-D7664 - Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
- ASTM-D8037 - Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
- ASTM-E1521 - Standard Test Method for Liquid Holding Capacity of Granular Carriers
BSI:
- BS-EN-ISO-11274 - Soil quality. Determination of the water-retention characteristic. Laboratory methods
- BS-EN-ISO-11275 - Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind's evaporation method
- BS-EN-ISO-15175 - Soil quality. Characterization of contaminated soil related to groundwater protection
- BS-ISO-11274 - Soil quality. Determination of the water-retention characteristic. Laboratory methods
- BS-ISO-11275 - Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind's evaporation method
- BS-ISO-11461 - Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
ISO:
- ISO-10573 - Soil quality - Determination of water content in the unsaturated zone - Neutron depth probe method
- ISO-11274 - Soil quality - Determination of the water-retention characteristic - Laboratory methods
- ISO-11275 - Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Winds evaporation method
- ISO-11276 - Soil quality - Determination of pore water pressure - Tensiometer method
- ISO-11461 - Soil quality -- Determination of soil water content as a volume fraction using coring sleeves -- Gravimetric method
- ISO-15175 - Soil quality - Characterization of contaminated soil related to groundwater protection
- ISO-15709 - Soil quality - Soil water and the unsaturated zone - Definitions, symbols and theory
- ISO-16586 - Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
- ISO-17312 - Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter
- ISO-17313 - Soil quality - Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
Other SDOs:
- DIN-ISO-11275 - Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004)
- DIN-ISO-11461 - Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001)
- DIN-ISO-15175 - Soil Quality, Characterization of Soil Related To Groundwater Protection
- DIN-ISO-15709 - Soil Quality - Soil Water & the Unsaturated Zone - Definitions, Symbols & Theory
- DIN-ISO-16586 - Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
- EN-ISO-11274 - Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009)
- EN-ISO-11275 - Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004)
- EN-ISO-11461 - Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
- EN-ISO-15175 - Soil quality - Characterization of soil related to groundwater protection
- SS-EN-1399 - Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
- SS-EN-14475 - Execution of special geotechnical works - Reinforced fill
- SS-EN-ISO-11274 - Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019)
- SS-EN-ISO-11275 - Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004)
- SS-EN-ISO-11276 - Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995)
- SS-EN-ISO-11461 - Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001)
- SS-EN-ISO-15175 - Soil quality - Characterization of contaminated soil related to groundwater protection (ISO 15175:2018)
- SS-EN-ISO-15799 - Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2019)
- SS-EN-ISO-22282-1 - Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
- SS-EN-ISO-22282-2 - Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems (ISO 22282-2:2012)
- SS-ISO-10573 - Soil quality - Determination of water content in unsaturated zone - Neutron depth probe method
- SS-ISO-11262 - Soil quality - Determination of total cyanide (ISO 11262:2011, IDT)
- SS-ISO-11274 - Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998/Cor 1:2009, IDT)
- SS-ISO-11275 - Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004, IDT)
- SS-ISO-11276 - Soil quality - Determination of pore water pressure - Tensiometer method
- SS-ISO-11461 - Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
- SS-ISO-15709 - Soil quality - Soil water and the unsaturated zone - Definitions, symbols and theory
- SS-ISO-15799 - Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2019, IDT)
- SS-ISO-15800 - Soil quality - Characterization of soil with respect to human exposure (ISO 15800:2019, IDT)
- SS-ISO-16586 - Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
- SS-ISO-17312 - Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter (ISO 17312:2005, IDT)