Document Center List of Standards on Other Standards Related To Protection Against Fire
ICS Code 13.220.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E1388 - Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
- ASTM-E1389 - Standard Practice for Cleanup of Fire Debris Sample Extracts by Acid Stripping (Withdrawn 2003)
- ASTM-E1412 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Activated Charcoal
- ASTM-E1413 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
- ASTM-E1618 - Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM-E2226 - Standard Practice for Application of Hose Stream
- ASTM-E2886 - Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
- ASTM-E2912 - Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
- ASTM-E2989 - Standard Guide for Assessment of Continued Applicability of Reaction to Fire Test Reports Used in Building Regulation
- ASTM-E3189 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
- ASTM-F1731 - Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
- ASTM-F2877 - Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
- ASTM-G145 - Standard Guide for Studying Fire Incidents in Oxygen Systems
BSI:
- BS-5499-6 - Graphical symbols and signs. Safety signs, including fire safety signs
- BS-6387 - Test method for resistance to fire of cables required to maintain circuit integrity under fire conditions
- BS-7244 - Specification for flame arresters for general use
- BS-7629-1 - Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire
- BS-7629-1-TC - Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire
- BS-7846 - Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
- BS-7990 - Tube furnace method for the determination of toxic product yields in fire effluents
- BS-8436 - Electric cables. Specification for 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
- BS-8492 - Telecommunications equipment and telecommunications cabling. Code of practice for fire performance and protection
- BS-EN-12101-1 - Smoke and heat control systems
- BS-EN-12101-10 - Smoke and heat control systems
- BS-EN-12101-13 - Smoke and heat control systems
- BS-EN-12101-2-TC - Tracked Changes. Smoke and heat control systems
- BS-EN-12101-3 - Smoke and heat control systems
- BS-EN-12101-3-TC - Tracked Changes. Smoke and heat control systems
- BS-EN-12101-6 - Smoke and heat control systems
- BS-EN-12101-6-TC - Tracked Changes. Smoke and heat control systems
- BS-EN-12101-8 - Smoke and heat control systems
- BS-EN-12874 - Flame Arresters, Performance Requirements, Test Methods & Limits for Use
- BS-EN-13381-2 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-15882-2 - Extended application of results from fire resistance tests for service installations
- BS-EN-15882-5 - Extended application of results from fire resistance tests for service installations
- BS-EN-60695-6-2 - Fire hazard testing
- BS-EN-IEC-60695-6-1 - Fire hazard testing
- BS-EN-IEC-60695-6-2 - Fire hazard testing
- BS-EN-IEC-60695-6-2-TC - Tracked Changes. Fire hazard testing
- BS-ISO-10294-1 - Fire resistance tests. Fire dampers for air distribution systems
- BS-ISO-13344 - Estimation of the lethal toxic potency of fire effluents
- BS-ISO-13344-TC - Tracked Changes. Estimation of the lethal toxic potency of fire effluents
- DD-IEC-60695-6-2 - Fire hazard testing
- PAS-95 - Hypoxic air fire prevention systems. Specification
- PD-CEN-12101-11 - Smoke and heat control systems
- PD-CEN-16793 - Guide for the selection, application and use of flame arresters
- PD-IEC-60695-5-2 - Fire hazard testing
- PD-ISO-16312-2 - Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment
IEC:
- IEC-60695-5-2 - Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods
- IEC-60695-5-3 - Part 5-3: Corrosion Damage Effects of Fire Effluent - Leakage-Current & Metal-Loss Test Me
- IEC-60695-6-1 - Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
- IEC-60695-6-1-1 - Amendment 1 - Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
- IEC-60695-6-1-RL - Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
- IEC-60695-6-2 - Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
- IEC-60695-6-31 - Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials
ISO:
- ISO-13344 - Estimation of the lethal toxic potency of fire effluents
- ISO-15928-4 - Houses - Description of performance - Part 4: Fire safety
- ISO-16312-1 - Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 1: Criteria
- ISO-16312-2 - Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 2: Evaluation of individual physical fire models
- ISO-27368 - Analysis of blood for asphyxiant toxicants - Carbon monoxide and hydrogen cyanide
Other SDOs:
- DIN-EN-12101-1 - Part 1: Specification for Smoke Barriers, Smoke & Heat Control Systems
- DIN-EN-12101-10 - Part 10: Power Supplies, Smoke & Heat Control Systems
- DIN-EN-12101-2 - Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators; German version EN 12101-2:2017
- DIN-EN-12101-3 - Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans); German version EN 12101-3:2015
- DIN-EN-12101-6 - Part 6: Specification for Pressure Differential Systems, Kits, Smoke & Heat Control Sy
- EN-12101-1 - Part 1: Specification for Smoke Barriers, Smoke and Heat Control Systems
- EN-12101-10 - Part 10: Power Supplies, Smoke & Heat Control Systems
- EN-12101-2 - Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
- EN-12101-3 - Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
- EN-12101-6 - Part 6: Specification for Pressure Differential Systems, Kits, Smoke & Heat Control Sy
- EN-12101-7 - Smoke and heat control systems - Part 7: Smoke duct sections
- EN-12101-8 - Smoke and heat control systems - Part 8: Smoke control dampers
- EN-13381-2 - Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
- EN-15882-2 - Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers
- EN-15882-4 - Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
- EN-60695-6-1 - Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
- EN-IEC-60695-6-2 - Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
- EN-ISO-16852 - Flame arresters - Performance requirements, test methods and limits for use
- SIS-CEN-12101-11 - Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks
- SIS-CEN/TR-12101-5 - Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems
- SS-EN-12101-10 - Smoke and heat control systems - Part 10: Power supplies
- SS-EN-12101-2 - Smoke and heat control systems - Part 2: Specification for Natural smoke and heat exhaust ventilators
- SS-EN-12101-3 - Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
- SS-EN-12101-6 - Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
- SS-EN-12101-7 - Smoke and heat control systems - Part 7: Smoke duct sections
- SS-EN-12101-8 - Smoke and heat control systems - Part 8: Smoke control dampers
- SS-EN-12874 - Flame arresters - Performance requirements, test methods and limits for use
- SS-EN-13381-1 - Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
- SS-EN-13381-2 - Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
- SS-EN-15882-2 - Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers
- SS-EN-15882-4 - Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
- SS-EN-15882-5 - Extended application of results from fire resistance tests for service installations - Part 5: Combined penetration seals
- SS-EN-ISO-16852 - Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
- SS-ISO-13399-1 - Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006, IDT)
- SS-ISO-16312-1 - Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 1: Criteria (ISO 16312-1:2016, IDT)
- SS-ISO-27368 - Analysis of blood for asphyxiant toxicants - Carbon monoxide and hydrogen cyanide (ISO 27368, IDT)
- SS-ISO-6396 - Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions (ISO 6396:2008, IDT)